MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Triumph Specifications

Triumph Daytona 1200 (1967-74)

Entry updated

At a glance

Capacity
490 cc / 29.9 in
Power
29.2 kW / 40 hp @ 7200 rpm

The full picture.

The Triumph Daytona T100R was a motorcycle produced by Triumph from 1967 to 1974. It had a four-stroke, twin-cylinder, overhead valve (OHV) engine with 2 valves per cylinder and a capacity of 490cc. The bore and stroke were 69mm and 65.5mm respectively, giving it a compression ratio of 9.0:1. It was air-cooled and had a kick-start mechanism. The maximum power output was 29.2kW or 40 horsepower at 7200 rpm. The transmission was a 4-speed system and the final drive was via a chain. The front suspension consisted of telescopic forks, while the rear had twin shocks and coil springs. The front and rear brakes were drums with internal expanding mechanisms. The front tyre measured 3.25-19 while the rear was 4.00-18. The wheelbase was 1360mm (53.6 inches) and the wet weight was 175kg (386 pounds). The fuel capacity was 13.5 litres (3.6 US gallons or 3.0 Imperial gallons). The top speed for this motorcycle was 160 km/h (99.4 mph).


Technical specifications:

Make Model: Triumph Daytona T100R

Motorcycle technical specifications
Year1967 – 74
EngineFour stroke, twin cylinder, OHV, 2 valves per cylinder
Capacity490 cc / 29.9 in
Bore x Stroke69 x 65.5 mm
Compression Ratio9.0:1
Cooling SystemAir cooled
StartingKick
Max Power29.2 kW / 40 hp @ 7200 rpm
Transmission4-Speed
Final DriveChain
Front Suspensiontelescopic forks
Rear SuspensionTwin Shocks, coil springs
Front BrakesDrum, internal expanding
Rear BrakesDrum, internal expanding
Front Tyre3.25-19
Rear Tyre4.00-18
Wheelbase1360 mm / 53.6 in
Wet Weight175 kg / 386 lbs
Fuel Capacity13.5 L / 3.6 US gal / 3.0 Imp gal
Top Speed160 km/h / 99.4 mph