Triumph Sprint ST (2000)

The Triumph Sprint ST motorcycle, produced in 2000, has a four-stroke, transverse three-cylinder engine with a capacity of 955 cc. It is liquid-cooled, has a multipoint sequential electronic fuel injection system, and uses synthetic oil. Its maximum power is 80.2 kW/110 hp at 9200 rpm, and its maximum torque is 97 Nm/9.89 kg-m/71.5 ft-lb at 6200 rpm. The clutch is wet and multiple-discs, cable-operated, with a six-speed transmission and a chain final drive. The frame is made of aluminum, with twin-spars and 45 mm forks with dual rate springs and adjustable preload for the front suspension, and a monoshock with adjustable preload, compression, and rebound damping for the rear suspension. The front brakes use two 320 mm discs and four-piston calipers, while the rear brake uses a single 255 mm disc and a two-piston caliper. The front and rear wheels are made of alloy, with three spokes, and the front and rear tires have sizes of 120/70 ZR17 and 190/50 ZZR17, respectively. The bike has a length of 2160 mm/85.0 in, a width of 735 mm/28.9 in (handlebars), and a height of 1220 mm/48.0 in. Its wheelbase is 1470 mm/57.9 in, and its seat height is 800 mm/31.5 in. It weighs 207 kg/456 lbs and has a fuel capacity of 21 liters/5.5 US gal/4.6 Imp gal. It has an average fuel consumption of 6.5 L/100 km/15.3 km/l/36 US mpg/43.2 Imp mpg, a standing 1/4 mile time of 11.0 seconds, and a top speed of 231 km/h/143.5 mph.

Technical specifications:

Make Model: Triumph Sprint ST