Gilera KK125 (1987-88)

Geschrieben auf von

The Gilera KK 125 motorcycle was produced from 1987-88 and had a two stroke, single cylinder, reed valve engine with a capacity of 124cc. It had a liquid cooling system, 28mm Dell’Orto carburetor, CDI ignition, and clutch with a multi-disc oil bath. The bike was capable of producing 29.3 horsepower at 9900 rpm and 18 Nm of torque at 10250 rpm. Transmission was a 6-speed with final drive via chain. The bike had a diagonal double cradle tubular steel frame, fork traditional 36mm front suspension, and hydraulic shock absorber adjustable in spring preload Court Cosso rear suspension. Brakes were single 240mm disc on both the front and rear with 100/80-16 front tire and 120/80-16 rear tire. The bike had a wet weight of 136 kg and fuel consumption average of 20 km/lit. Braking from 60-0 and 100-0 took 13.7m and 42.5m respectively, while standing ¼ mile was achieved in 15.8 seconds at a speed of 132.8 km/h. The Gilera KK 125 had a top speed of 154.2 km/h or 95 mph.

Technische Daten:

Make Model: Gilera KK 125

Year: 1987 – 88


Motor: Zweitakt, Einzylinder, Lamellenventil
Hubraum: 124 cm³ / 7,6 cu-in
Bohrung x Hub: 56 x 50,5 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 13,0:1
Induction: 28mm Dell’Orto carburetor
Zündung: CDI
Anfahren: Elektrisch
Max Leistung: 29,3 PS / 21,8 kW @ 9900 U/min
Maximales Drehmoment: 18 Nm / 13.2 lb-ft @ 10250 U/min
Kupplung: Mehrscheiben-Ölbad
Getriebe: 6-Gang
Endantrieb: Kette
Rahmen: Diagonale Doppelwiege-Stahlrohr
Vordere Federung: Gabel traditionell 36mm. Antidive einstellbar

Hintere Aufhängung: Hydraulischer Stoßdämpfer einstellbar in Federvorspannung Gericht Cosso
Vordere Bremsen: Einzelne 240-mm-Scheibe
Hintere Bremsen: Einzelne 240-mm-Scheibe
Reifen vorne: 100/80-16
Hinterreifen: 120/80-16
Wet-Weight: 136 kg
Kraftstoffkapazität:
Verbrauch Durchschnitt: 20 km/Liter
Braking 60 – 0 / 100 – 0: 13.7 m / 42.5 m
Standing 1/4 Mile: 15.8 sec / 132.8 km/h
Top Speed: 154.2 km/h / 95 mph

Verwandte Modelle: