The Gilera KK 125 motorcycle was produced from 1987-88 and had a two stroke, single cylinder, reed valve engine with a capacity of 124cc. It had a liquid cooling system, 28mm Dell’Orto carburetor, CDI ignition, and clutch with a multi-disc oil bath. The bike was capable of producing 29.3 horsepower at 9900 rpm and 18 Nm of torque at 10250 rpm. Transmission was a 6-speed with final drive via chain. The bike had a diagonal double cradle tubular steel frame, fork traditional 36mm front suspension, and hydraulic shock absorber adjustable in spring preload Court Cosso rear suspension. Brakes were single 240mm disc on both the front and rear with 100/80-16 front tire and 120/80-16 rear tire. The bike had a wet weight of 136 kg and fuel consumption average of 20 km/lit. Braking from 60-0 and 100-0 took 13.7m and 42.5m respectively, while standing ¼ mile was achieved in 15.8 seconds at a speed of 132.8 km/h. The Gilera KK 125 had a top speed of 154.2 km/h or 95 mph.
Technical specifications:
Make Model: Gilera KK 125
| Year | 1987 – 88 |
|---|---|
| Engine | Two stroke, single cylinder, reed valve |
| Capacity | 124 cc / 7.6 cu-in |
| Bore x Stroke | 56 x 50.5 mm |
| Cooling System | Liquid cooled |
| Compression Ratio | 13.0:1 |
| Induction | 28mm Dell’Orto carburetor |
| Ignition | CDI |
| Starting | Electric |
| Max Power | 29.3 hp / 21.8 kW @ 9900 rpm |
| Max Torque | 18 Nm / 13.2 lb-ft @ 10250 rpm |
| Clutch | Multi-disc oil bath |
| Transmission | 6 Speed |
| Final Drive | Chain |
| Frame | Diagonal double cradle tubular steel |
| Front Suspension | Fork traditional 36mm. Antidive adjustable |
| Rear Suspension | Hydraulic shock absorber adjustable in spring preload Court Cosso |
| Front Brakes | Single 240mm disc |
| Rear Brakes | Single 240mm disc |
| Front Tyre | 100/80-16 |
| Rear Tyre | 120/80-16 |
| Wet-Weight | 136 kg |
| Fuel Capacity | |
| Consumption Average | 20 km/lit |
| Braking 60 – 0 / 100 – 0 | 13.7 m / 42.5 m |
| Standing 1/4 Mile | 15.8 sec / 132.8 km/h |
| Top Speed | 154.2 km/h / 95 mph |
