Honda NSR 250SE (1996)

The Honda NSR 250SE MC28 is a two-stroke, 90-degree V-twin cylinder motorcycle with a capacity of 249cc and a compression ratio of 7.4:1. It is fueled by a TB10 carburetor and has a separate pump (engine) splash type (transmission) lubrication system. The PGM-CDI ignition system provides a kick-start for the engine, which has a maximum power output of 40hp at 9000 rpm and a maximum torque of 3.3 kgf-m at 8000 rpm. The multi-plate, coil spring clutch is paired with a constant mesh six-speed transmission and chain final drive.

This motorcycle comes with a lightweight aluminum tube frame and a 41mm telescopic air valve semi-adjustable front suspension as well as a Pro-Link single shock swingarm non-adjustable rear suspension. The front brakes consist of two discs and two-piston calipers, while the rear brakes consist of a single disc and one-piston caliper. It has a 110/70-17 54 H front tire and a 150/60-R17 66 H rear tire.

The dimensions of the Honda NSR 250SE MC28 are 1970 mm in length, 650 mm in width, and 1045 mm in height, with a wheelbase of 1340 mm and a seat height of 770 mm. The dry weight of the bike is 138 kg, while the wet weight is 157 kg. The fuel capacity is 16 litres, and it has a ground clearance of 130 mm.

This motorcycle is available in Type I, Type II, and Technical configurations. Overall, the Honda NSR 250SE MC28 is a powerful and agile two-stroke machine with impressive acceleration and handling capabilities.


Technische Daten:

Make Model: Honda NSR 250SE MC28

Jahr: 1996


Motor: Zweitakt, 90-Grad-V-Zweizylinder, Lamellenventil/Auslassventil
Fassungsvermögen: 249 c / 15,2 cu-in
Bohrung x Hub: 54 x 54,5 mm
Kühlsystem: Flüssigkeitsgekühlt
Verdichtungsverhältnis: 7,4: 1
Ansaugung: TB10 Vergaser Typ
Schmierung: Getrennte Pumpe (Motor) Spritzwasser (Getriebe)
Zündung: PGM-CDI
Start: Kick
Maximale Leistung: 40 PS bei 9000 U/min
Max. Drehmoment: 3,3 kgf-m @ 8000 U/min
Kupplung: Lamellenkupplung, Schraubenfeder
Getriebe: Constant Mesh 6-Gang
Endantrieb: Kette
Rahmen: Aluminium Rohr Typ Rahmen

Vordere Federung: 41mm Teleskop-Luftventil halb einstellbar
Hintere Aufhängung: Hinten: Pro-Link Einzelschockschwinge nicht einstellbar
Bremsen vorne: 2x Scheiben 2-Kolben-Bremssättel
Hintere Bremsen: Einzelscheibe 1-Kolben-Bremssattel
Vorderreifen: 110/70-17 54 H
Hinterreifen: 150/60-R17 66 H
Rechen: 23 Grad15
Nachlauf: 85 mm / 3.3 in
Abmessungen: Länge 1970 mm / 77.5 in Breite 650 mm / 25.5 in Höhe 1045 mm / 41.1 in
Radstand: 1340 mm / 52.7 in
Sitzhöhe: 770 mm / 30.3 in
Bodenfreiheit: 130 mm / 5.1 in
Trockengewicht: 138 kg / 304.2 lbs
Nassgewicht: 157 kg / 346 lbs
Kraftstoffkapazität: 16 Liter / 4.2 US gal
Überprüfung: Typ I / Typ II / Technisch

Verwandte Modelle: