Harley Davidson Dyna Low Rider (2016-17)

The Harley Davidson Dyna Low Rider motorcycle was produced between 2016 and 2017. It features a Four stroke, V-Twin, Twin Cam 103 c engine with a capacity of 1690 cc / 103.1 cu in. The bike is air-cooled and has a compression ratio of 9.6:1. It has Electronic Sequential Port Fuel Injection (ESPFI) and a Single-fire, non-wasted, map-controlled spark ignition. The maximum torque of the bike is 126 Nm / 112.8 kgf-m / 92.9 ft-lb at 3500rpm. The motorcycle has a 6-speed transmission and a belt final drive with a chain, 34/46 ratio primary drive. The frame is made of mild steel, tubular and has a rectangular section backbone. The Lean Angle, Left is 30.5o and Lean Angle, Right is 29.5o. The bike has a 49 mm front suspension with polished aluminum fork triple clamp and dual-rate springs and a coil-over shock rear suspension. The front brakes of the bike consist of a single 300 mm disc, 4 piston fixed caliper and the rear brakes have a single 292 mm disc, 2 piston torque-free floating caliper. The front and rear wheels of the bike are chrome, steel laced and have optional black, split 5-spoke cast aluminum. The front tire is 100/90B19 57H and the rear tire is 160/70B17 73V. The rake of the bike is 30.5 degrees and the trail is 128 mm / 5.1 in. The dimensions of the bike are Length 2345 mm / 92.3 in.


Technische Daten:

Make Model: Harley Davidson Dyna Low Rider

Jahr: 2016 - 17


Motor: Viertakt, V-Twin, Twin Cam 103 c mit integriertem Ölkühler
Hubraum: 1690 ccm / 103,1 cu in
Bohrung x Hub: 98,4 x 111,1 mm
Kühlsystem: Luftgekühlt
Verdichtungsverhältnis: 9,6:1
Exhaust: 2-into-1 Exhaust with a deep rumble
Einspritzung: Elektronische sequenzielle Port-Kraftstoffeinspritzung (ESPFI)
Zündung: Einzelfeuer, nicht verschmutzte, kennfeldgesteuerte Funkenzündung
Anfahren: Elektrisch
Max Torque: 126 Nm / 112.8 kgf-m / 92.9 ft-lb @ 3500 rpm
Getriebe: 6-Gang
Endantrieb: Riemen
Primärer Antrieb: Kette, Übersetzung 34/46
Getriebeübersetzung: 1. 9.311 / 2. 6.454 / 3. 4.793 / 4. 3.882 / 5. 3.307 / 6. 2.790:1
Rahmen: Baustahl, Rohrrahmen; Rechteckprofil-Rückgrat; gestanzte, gegossene und geschmiedete Knotenpunkte, geschmiedete Kotflügelstützen; MIG-geschweißt

Lean Angle, Left: 30.5o
Lean Angle, Right: 29.5o
Federung vorne: 49 mm mit polierter Aluminium-Gabelbrücke und Dual-Rate-Federn
Hintere Aufhängung: Spule über Stoßdämpfer
Front Brakes: Single 300 mm disc, 4 piston fixed caliper
Rear Brakes: Single 292 mm disc, 2 piston torque free floatingcaliper
Front Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Rear Wheel: Chrome, steel laced ( optional: Black, split 5-spoke cast aluminium)
Vorderreifen: 100/90B19 57H
Hintere Bereifung: 160/70B17 73V
Harke: 30,5 Grad
Trail: 128 mm / 5.1 in
Dimensions: Length 2345 mm / 92.3 in.

Verwandte Modelle: