2017-18 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 21:08:39 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 kawasaki Ninja 400 (2017-18) https://motorcyclespecifications.com/kawasaki-ninja-400-2017-18-specs/ Fri, 07 Apr 2023 14:00:14 +0000 https://motorcyclespecifications.com/?p=48303 The Kawasaki Ninja 400/ABS motorcycle was released in the years 2017-2018. It has a four-stroke, parallel-twin cylinder engine with a capacity of 399 cc, and a cooling system that is

The post kawasaki Ninja 400 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Ninja 400/ABS motorcycle was released in the years 2017-2018. It has a four-stroke, parallel-twin cylinder engine with a capacity of 399 cc, and a cooling system that is liquid-cooled. The motorcycle has a compression ratio of 11.6:1 and a lubrication system that is forced lubrication with a wet sump. The fuel injection system is a 32mm x 2 Keihin and the motorcycle has an electric starting system. The maximum power of the motorcycle is 36 kW / 49 hp at 10,000 rpm and the maximum torque is 38 Nm / 3.9 kgf.m at 8,000 rpm. The Kawasaki Ninja 400/ABS has a clutch that is wet and cable operated, a six-speed transmission, and a final drive that is a chain. The motorcycle is equipped with a trellis, high-tensile steel frame, and has a front suspension that is a 41mm telescopic fork. The rear suspension is a bottom-link Uni-Trak, gas-charged shock with an adjustable preload. The brakes of the motorcycle are a single semi-floating 310mm disc with single balanced actuation dual-piston for the front, and a single 220mm disc with dual-piston for the rear. The front tire size is 110/70-17 M/C 54S and the rear tire size is 150/60R17 M/C 66H. The Kawasaki Ninja 400/ABS has a rake of 24.7 degrees, a trail of 92mm/3.6in, and a steering angle of 35 degrees/35 degrees. The motorcycle dimensions are length 1990mm/78.3in, width 710mm/27.9in, and height 1120mm/14in. The wheelbase is 1370mm/53.9in, the seat height is 785mm/30.9in, and the ground clearance is 140mm/5.5in. The Kawasaki Ninja 400/ABS has a wet weight of 166kg/366lbs and a fuel capacity of 14 litres/3.7 US gal.


Technical specifications:

Make Model: Kawasaki Ninja 400 / ABS

Year: 2017 – 18
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder.
Capacity: 399 cc / 24.3 cu-in
Bore x Stroke: 70.0 x 51.8 mm
Cooling System: Liquid cooled
Compression Ratio: 11.6:1
Lubrication: Forced Lubrication, wet sump
Induction: Fuel Injection: 32mm x 2 Keihin
Ignition: TCBI with digital advance / electric
Starting: Electric
Max Power: 36 kW / 49 hp @ 10000 rpm
Max Torque: 38 Nm / 3.9 kgf.m @ 8000 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.929 (41/14) 2nd 2.056 (37/18) [ 3rd 1.619 (34/21) 4th 1.333 (32/24) 5th 1.154 (30/26) 6th 1.037 (28/27)
Primary Reduction Ratio: 2.219 (71/32)
Final Reduction Ratio: 2.929 (41/14)
Frame: Trellis, high-tensile steel
Front Suspension: 41 mm telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Bottom-Link Uni-Trak, gas-charged shock with adjustable preload
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: Single semi-floating 310mm disc, Single balanced actuation dual-piston
Rear Brakes: Single 220mm disc, Dual-piston
Front Tyre: 110/70-17 M/C 54S
Rear Tyre: 150/60R17 M/C 66H
Rake: 24.7 degrees
Trail: 92 mm / 3.6 in
Steering Angle (left/right): 35 degrees / 35 degrees
Dimensions: Length 1990 mm / 78.3 in Width 710 mm / 27.9 in Height 1120 mm / 14.0 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 785 mm / 30.9 in
Ground Clearance: 140 mm / 5.5 in
Wet Weight: 166 kg / 366 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post kawasaki Ninja 400 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Ninja 1000 2017 (2017-18) https://motorcyclespecifications.com/kawasaki-ninja-1000-2017-2017-18-specs/ Fri, 07 Apr 2023 07:01:03 +0000 https://motorcyclespecifications.com/?p=47962 The Kawasaki Ninja 1000 2017-18 motorcycle boasts a four-stroke, transverse four-cylinder engine with 4 valves per cylinder and a capacity of 1043 cc. It has a compression ratio of 11.8:1

The post Kawasaki Ninja 1000 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Ninja 1000 2017-18 motorcycle boasts a four-stroke, transverse four-cylinder engine with 4 valves per cylinder and a capacity of 1043 cc. It has a compression ratio of 11.8:1 and is liquid-cooled. The bike is powered by a DFI (R) with four 38mm Keihin throttle bodies and has oval sub-throttles. It has a maximum power of 101.5 kW / 138 hp at 9600 rpm and a maximum torque of 110 Nm / 11.2 kg-fm at 7800 rpm. Its transmission is a six-speed manual and the final drive is via a chain. The bike has an aluminum backbone frame and a rake/trail of 24.5 degrees/4.1 in. The front suspension is a 41 mm inverted fork with rebound damping and progressive compression and preload adjustment. The rear suspension is a back-link rear horizontal coupling charged gas with progressive rebound damping and spring preload adjustment. The front brakes feature two 300mm discs and 4-piston calipers while the rear brake is a single 250mm disc with a single-piston caliper. The front tire is 120/70-R17, while the rear tire is 190/50-ZR17. The bike has a length of 2105mm, a width of 790mm, and a height of 1170mm with a wheelbase of 1445mm. Its ground clearance is 135mm and the seat height is 822mm. The bike has a wet weight of 228kg with ABS or 231kg without ABS and has a fuel capacity of 19 litres.


Technical specifications:

Make Model: Kawasaki Ninja 1000

Year: 2017 – 18
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 1043 cc / 63.6 cu-in
Bore x Stroke: 77.0 x 56.0mm
Cooling System: Liquid cooled
Compression Ratio: 11.8:1
Induction: DFI (R) with four 38mm Keihin throttle bodies, oval sub-throttles
Ignition: TCBI with digital advance
Starting: Electric
Max Power: 101.5 kW / 138 hp @ 9600 rpm
Max Torque: 110 Nm / 11.2 kg-fm @ 7800 rpm
Transmission: 6 Speed
Final Drive: Chain
Gear Rato: 1st 2.600 (39/15) 2nd 1.950 (39/20) 3rd 1.600 (24/15) 4th 1.389 (25/18) 5th 1.238 (26/21) 6th 1.136 (25/22)
Frame: Type: Aluminum Backbone
Rake/Trail: 24.5 degrees / 4.1 in.
Front Suspension: 41 mm inverted fork with rebound damping and progressive compression and preload adjustment
Rear Suspension: Back-link rear horizontal coupling charged gas, progressive rebound damping and spring preload adjustment
Front Brakes: 2x 300mm discs 4 piston caliper
Rear Brakes: Single 250mm disc 1 piston caliper
Front Tyre: 120/70 -R17
Rear Tyre: 190/50- ZR17
Dimensions: Length 2,105 mm / 82.9 in. Width 790 mm / 31.2 in. Height 1170 mm / 46.1 in
Wheelbase: 1445 mm / 56.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 822 mm / 32.3 in
Wet Weight: 228 kg / 502.6 lbs ABS 231 kg / 509.4 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Kawasaki Ninja 1000 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Z 1000R 2017 (2017-18) https://motorcyclespecifications.com/kawasaki-z-1000r-2017-2017-18-specs/ Fri, 07 Apr 2023 04:54:56 +0000 https://motorcyclespecifications.com/?p=47845 The Kawasaki Z 1000R motorcycle for 2017-18 has a four stroke, transverse four cylinder engine and a capacity of 1043 cc. The maximum power output of the bike is 104.5

The post Kawasaki Z 1000R 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Z 1000R motorcycle for 2017-18 has a four stroke, transverse four cylinder engine and a capacity of 1043 cc. The maximum power output of the bike is 104.5 kW/142 hp at 10000 rpm, while the maximum torque is 111 Nm/11.3 kgf.m at 7300 rpm. The bike has a wet multi-disc, manual clutch and a six speed transmission with X-ring chain final drive. It has a lightweight aluminum backbone frame and suspension features including an inverted SFF-BP fork and a horizontal monoshock with rebound damping and spring preload adjustability. The front brakes consist of dual radial-mount Brembo M50 monobloc discs while the rear brake is a single 250mm disc petal-type rotor with ABS. The front and rear tires are 120/70 -R17 and 190/50 ZR17 respectively. The bike has a ground clearance of 125 mm/4.9 in and a wet weight of 220 kg/487 lbs. The fuel capacity is 17 liters/4.5 US gal.


Technical specifications:

Make Model: Kawasaki Z 1000R

Year: 2017 – 18
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder
Capacity: 1043 cc / 63.6 cu-in
Bore x Stroke: 77.0 x 56.0mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Induction: DFI (R) with four 38mm Keihin throttle bodies, oval sub-throttles
Ignition: TCBI with digital advance / electric
Starting: Electric
Max Power: 104.5 kW / 142 hp @ 10000 rpm
Max Torque: 111 Nm / 11.3 kgf.m @ 7300 rpm
Clutch: Wet multi-disc, manual
Transmission: 6 Speed
Final Drive: X-ring chain
Gear Ratio: 1st 2.600 (39/15) 2nd 1.950 (39/20) 3rd 1.600 (24/15) 4th 1.389 (25/18) 5th 1.238 (26/21) 6th 1.107 (31/28)
Final reduction ratio: 2.800 (43/15)
Frame: Aluminum Backbone
Front Suspension: 41 mm inverted SFF-BP fork with stepless compression and rebound damping and spring preload adjustability
Front Wheel Travel: 125 mm / 4.7 in
Rear Suspension: Horizontal monoshock with stepless rebound damping, remotely adjustable spring preload
Rear Wheel Travel: 131 mm / 5.1 in
Front Brakes: 2x semi-floating 310 mm Brembo discs, Dual radial-mount, Brembo M50 monobloc, opposed 4-piston
Rear Brakes: Single 250mm disc petal-type rotor with 1 piston caliper and ABS
Front Tyre: 120/70 -R17
Rear Tyre: 190/50 ZR17
Rake: 24.5 degrees
Trail: 103 mm / 4.0 in
Steering Angle (left/right): 31 degrees / 31 degrees
Dimensions: Length 2045 mm / 80.5 in Width 790 mm / 31.1 in Height 1054 mm / 41.5 in
Wheelbase: 1440 mm / 56.5 in.
Ground clearance: 1435 mm / 56.5 in.
Seat Height: 815.3 mm / 32.1 in.
Ground Clearance: 125 mm / 4.9 in
Wet Weight: 220 kg / 487 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Kawasaki Z 1000R 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Monster 797 (2017-18) https://motorcyclespecifications.com/ducati-monster-797-2017-18-specs/ Fri, 07 Apr 2023 04:12:55 +0000 https://motorcyclespecifications.com/?p=47808 The Ducati Monster 797 is a 2017-18 motorcycle equipped with a four-stroke 803cc engine, a six-speed transmission, and a tubular steel trellis frame. The bike has both front and rear

The post Ducati Monster 797 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Monster 797 is a 2017-18 motorcycle equipped with a four-stroke 803cc engine, a six-speed transmission, and a tubular steel trellis frame. The bike has both front and rear suspension, with the front featuring 43mm Kayaba usd fork and the rear featuring Sachs monoshock. The front brakes consist of two semi-floating discs with 4-piston calipers, while the rear brake has one disc with 2-piston calipers. Bosch ABS comes as standard equipment for both. The wheels on the 797 are 10-spoke light alloy. The bike weighs 175 kg / 386 lbs dry and 193 kg / 425 lbs wet, with a fuel capacity of 16.5 Litres / 4.3 US gal. The LCD display provides instrumentation.


Technical specifications:

Make Model: Ducati Monster 797

Year: 2017 – 18
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valves per cylinder
Capacity: 803 cc / 49.0 cu in
Bore x Stroke: 88 x 66 mm
Compression Ratio: 11.0:1
Cooling System: Air cooled
Exhaust: 2-1 system with catalytic converter and two lambda probes, Single stainless steel muffler with
Induction: Siemens electronic fuel injection, 45mm throttle body
Ignition: Electronic fuel injection system, 50 throttle bodies
Starting: Electric
Exhaust:: Lightweight 2-1-2 system with catalytic converter with twin lambda probes
Max Power: 54.4 kW / 73 hp @ 8250 rpm
Max Torque: 68.9 Nm / 50.8 lb-ft @ 6250rpm
Clutch: APTC wet multiplate with hydraulic control
Transmission: 6 Speed
Final Drive: Chain; Front sprocket Z15, Rear sprocket Z46
Gear Ratio: 1st 32/13 2nd 30/18 3rd 28/21 4th 26/23 5th 22/22 6th 24/26
Primary Drive: Straight cut gears, Ratio 1.85:1
Frame: Tubular steel trellis
Front Suspension: 43mm Kayaba usd fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Sachs monoshock, Pre-load and rebound adjustable
Rear Wheel travel: 130 mm / 5.1 in
Front Brakes: 2 x 320mm semi-floating discs radially mounted , 4 piston calipers, , Bosch ABS as standard equipment
Rear Brakes: Single 245 mm disc, 2 piston caliper, Bosch ABS as standard equipment
Front Wheel: 10-spoke light alloy, 3.50 x 17
Rear Wheel: 10-spoke light alloy, 5.50 x 17
Front Tyre: 120/70 ZR17 Pirelli Diablo Rosso II
Rear Tyre: 180/55 -ZR17 Pirelli Diablo Rosso II,
Rake: 24 degrees
Trail: 90 mm / 3.54 in
Wheelbase: 1435 mm / 56.5 in
Seat Height: 805 mm / 31.6 in
Dry Weight: 175 kg / 386 lbs
Wet Weight: 193 kg / 425 lbs
Fuel Capacity: 16.5 Litres / 4.3 US gal
Instrumentation: LCD display

The post Ducati Monster 797 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki DL V-Storm 1000 (2017-18) https://motorcyclespecifications.com/suzuki-dl-v-storm-1000-2017-18-specs/ Fri, 07 Apr 2023 03:53:13 +0000 https://motorcyclespecifications.com/?p=47792 The Suzuki DL V-Strom 1000 motorcycle was made from 2017-18 and has a four-stroke, 90-degree V-twin engine with a capacity of 1037 cc/63.2 cu-in. Its compression ratio is 11.3:1 and

The post Suzuki DL V-Storm 1000 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki DL V-Strom 1000 motorcycle was made from 2017-18 and has a four-stroke, 90-degree V-twin engine with a capacity of 1037 cc/63.2 cu-in. Its compression ratio is 11.3:1 and it has wet sump lubrication with a 3.5-liter/7.4 US pt/6.2 Imp pt oil capacity. The engine uses Suzuki Fuel Injection and has electronic ignition with an electric starter. The maximum power output is 73.9 kW/99.2 hp at 8000 rpm, and the maximum torque is 103 Nm/10.5 kgf-m/76 lb-ft at 4000 rpm. The clutch is wet with multiple discs and hydraulic control, and the six-speed transmission has a chain final drive. The bike’s frame is an aluminum twin-spar design, and the suspension setup includes a 40mm inverted telescopic fork and a link-type rear suspension with coil springs and oil damping. The front brakes have two 310mm discs, four-piston radial calipers, and ABS, while the rear brake is a single 265mm disc with a two-piston caliper and ABS. The bike has wire-spoked wheels and 110/80R19M/C 59V front and 150/70R17M/C 69V rear tires. The rake is 25.7 degrees and the trail is 109mm/4.3 in. The bike is 2285mm/89.96in long, 865mm/34.1in wide, and 1410mm/55.5in tall, with a wheelbase of 1535mm/60.4in and a ground clearance of 165mm/6.5in. The seat height is 840mm/33.1in, and the bike has a wet weight of 228kg/502.6lbs and a fuel capacity of 20 liters/5.3 US gal/4.4 Imp gal.


Technical specifications:

Make Model: Suzuki DL 1000 V-Strom

Year: 2017 – 18
Engine: Four stroke, 90 degrees-V-twin, DOHC, 4 valves per cylinder.
Capacity: 1037 cc / 63.2 cu-in
Bore x Stroke: 100 x 66.0mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Wet sump
Oil capacity: (Overhaul) 3.5 Litres / 7.4 US pts / 6.2 Imp pts
Induction: Suzuki Fuel Injection
Ignition: Electronic ignition
Starting: Electric
Max Power: 73.9 kW / 99.2 hp / @ 8000 rpm
Max Torque: 103 Nm / 10.5 kgf-m / 76 lb-ft @ 4000 rpm
Clutch: Wet, multiple discs, hydraulic
Transmission: 6 Speed
Final Drive: Chain
Primary Reduction Ratio: 1.838 (57/31)
Final Reduction Ratio: 2.411 (41/17)
Frame: Aluminium, twin spar
Front Suspension: 40mm Inverted telescopic, coil spring, oil damped
Front Wheel Travel: 160 mm / 6.3 in
Rear Suspension: Link type, coil spring, oil damped
Rear Wheel Travel: 160 mm / 6.3 in
Front Brakes: 2 x 310 mm discs, 4 piston radial calipers, ABS
Rear Brakes: Single 265 mm disc, 2 piston caliper, ABS
Wheels: Wire spoked
Front Tyre: 110/80R19M/C 59V
Rear Tyre: 150/70R17M/C 69V
Rake: 25.7 degrees
Trail: 109 mm / 4.3 in
Dimensions: Length 2285 mm / 89.96 in Width 865mm / 34.1in) Height 1410 mm / 55.5 in
Wheelbase: 1,535 mm / 60.4 in
Ground Clearance: 165 mm / 6.5 in
Seat Height: 840 mm / 33.1 in
Wet Weight: 228 kg / 502.6 lbs
Fuel Capacity: 20 Litres / 5.3 US gal / 4.4 Imp gal

The post Suzuki DL V-Storm 1000 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Thunderbir (2017-18) https://motorcyclespecifications.com/triumph-thunderbir-2017-18-specs/ Fri, 07 Apr 2023 03:21:21 +0000 https://motorcyclespecifications.com/?p=47760 The Triumph Thunderbird is a 2017-18 model year motorcycle with a four-stroke, parallel twin DOHC engine with 4 valves per cylinder and a firing interval of 270 degrees. The bike

The post Triumph Thunderbir (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Thunderbird is a 2017-18 model year motorcycle with a four-stroke, parallel twin DOHC engine with 4 valves per cylinder and a firing interval of 270 degrees. The bike has a capacity of 1597 cc and a bore and stroke of 103.8 x 94.3 mm. The motorcycle is liquid-cooled and has a 9.7:1 compression ratio, with a 4.2 L oil capacity. The exhaust system is chromed twin-skin stainless steel 2 into 1 into 2 with chrome plated silencers. The bike is equipped with a multipoint sequential electronic fuel injection with SAI and has a wet sump lubrication system. The ignition is a digital inductive type via electronic engine management and the bike starts electrically. The Triumph Thunderbird has a maximum power of 64 kW / 86 hp and a maximum torque of 146 Nm / 14.9 kgf-m / 107.7 ft-lb. The bike has a wet, multi-plate clutch and a 6-speed transmission, with a toothed belt final drive. Its frame is made of tubular steel with twin spine and twin-sided swingarm made of steel. The front suspension is Showa 47mm forks with 120mm wheel travel, while the rear suspension is Showa chromed spring twin shocks with 5-position adjustable preload and 95mm wheel travel. The Thunderbird has 2 x 310mm floating discs, Nissin 4-piston fixed calipers, and ABS front brakes, with a single 310mm fixed disc, Brembo 2-piston floating caliper, and ABS rear brakes. The bike’s wheels are cast aluminum alloy 5-spoke, with sizes of 19 x 3.5 in for the front wheel and 17 x 6 in for the rear wheel. The front tire is 120/70 R19 and the rear tire is 200/50 R17. The Triumph Thunderbird’s rake is 32 degrees, with a trail of 151 mm / 5.9 in. It has a length of 2340 mm / 92.1 in, width of 800 mm / 34.6 in (handlebars), height of 1120 mm / 44.1 in and a wheelbase of 1615 mm / 63.5 in. The seat height is 702 mm / 27.6 in, dry weight is 308 kg / 679 lbs, and wet weight is 339 kg / 747 lbs. Its fuel capacity is 22 liters / 5.8 gal.


Technical specifications:

Make Model: Triumph Thunderbird

Year: 2017 – 18
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder, 270 degrees firing interval.
Capacity: 1597 cc / 97.5 cub in
Bore x Stroke: 103.8 x 94.3 mm
Cooling System: Liquid cooled
Compression Ratio: 9.7:1
Oil Capacity: 4.2 L / 1.1 US gal .0.92 Imp gal
Exhaust: Chromed twin-skin stainless steel 2 into 1 into 2 exhaust system with chrome plated silencers
Lubrication: Wet sump
Induction: Multipoint sequential electronic fuel injection with SAI , progressive linkage on throttle
Ignition: Digital inductive type via electronic engine management
Starting: Electric
Max Power: 64 kW / 86 hp @ 4850 rpm
Max Torque: 146 Nm / 14.9 kgf-m / 107.7 ft-lb @ 2750rpm
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Toothed belt
Gear Ratio: 1st 2.9875 / 2nd 1.958 / 3rd 1.536 / 4th 1.219 / 5th 1.029 / 6th 0.909:1
Frame: Tubular steel, twin spine, swingarm twin sided, steel
Front Suspension: Showa 47mm forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Showa chromed spring twin shocks with 5 position adjustable preload.
Rear Wheel Travel: 95 mm / 3.7 in
Front Brakes: 2 x 310 mm floating discs, Nissin 4 piston fixed calipers, ABS
Rear Brakes: Single 310 mm fixed disc, Brembo 2 piston floating caliper, ABS
Front Wheel: Cast aluminium alloy 5-spoke 19 x 3.5 in
Rear Wheel: Cast aluminium alloy 5-spoke 17 x 6 in
Front Tyre: 120/70 R19
Rear Tyre: 200/50 R17
Rake: 32 degrees
Trail: 151 mm / 5.9 in
Dimensions: Length 2340 mm / 92.1 in Width 800 mm / 34.6 in (Handlebars) Height 1120 mm / 44.1 in
Wheelbase: 1615 mm / 63.5 in
Seat Height: 702 mm / 27.6 in
Dry Weight: 308 kg / 679 lbs
Wet Weight: 339 kg / 747 lbs
Fuel Capacity: 22 Litres / 5.8 gal

The post Triumph Thunderbir (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHR Road King Special (2017-18) https://motorcyclespecifications.com/harley-davidson-flhr-road-king-special-2017-18-specs/ Fri, 07 Apr 2023 00:44:20 +0000 https://motorcyclespecifications.com/?p=47614 The Harley Davidson FLHR Road King Special motorcycle was manufactured between 2017 and 2018. It is equipped with a four-stroke, V-twin Milwaukee-Eight 107 engine that has a capacity of 1746

The post Harley Davidson FLHR Road King Special (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHR Road King Special motorcycle was manufactured between 2017 and 2018. It is equipped with a four-stroke, V-twin Milwaukee-Eight 107 engine that has a capacity of 1746 cc and 4 valves per cylinder. The engine is air-cooled and has a compression ratio of 10.0:1. The motorcycle has a black, 2-1-2 dual exhaust with tapered mufflers and electronic sequential port fuel injection (ESPFI) induction. It also has pressurized, dry-sump lubrication with oil cooler and a single-fire, non-wasted, map-controlled spark ignition.

The Harley Davidson FLHR Road King Special motorcycle has a hydraulically actuated 9 plate wet, assist and slip clutch with a 6-speed transmission and belt final drive. The steel frame is a two-piece stamped and welded backbone with cast and forged junctions, twin downtubes, bolt-on rear frame with forged fender supports, and MIG welded swingarm.

The motorcycle has 49 mm forks with dual bending valve front suspension and premium low height hand-adjustable rear shocks. The front and rear brakes have 300 mm discs, and the front brakes have a caliper type 32 mm, 4-piston fixed, dual-floating rotors. The motorcycle has standard ABS and black turbine cast aluminum wheels with a rake angle of 26 degrees.

The Harley Davidson FLHR Road King Special motorcycle has a maximum torque of 151 Nm at 3250 rpm and a lean angle of 31 degrees on the left and 32 degrees on the right. The front tire is 130/60B19 61H, and the rear tire is 180/55B18 80H.


Technical specifications:

Make Model: Harley Davidson FLHR Road King Special

Year: 2017 – 18
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in.
Bore x Stroke: 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Black, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 151 Nm / 111.4 ft/lb @ 3250 rpm
Clutch: Hydraulically actuated 9 plate wet, Assist & Slip
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.593 / 2nd 6.65 / 3rd 4.938 / 4th 4.0 / 5th 3.407 / 6th 2.875
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Front Suspension: 49 mm forks, Dual Bending Valve
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Premium low height hand-adjustable rear shocks
Rear Wheel Travel: 54.6 mm / 2.15 in
Lean Angle, Left: 31o
Lean Angle, Right: 32 o
Front Brakes: 2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors
Rear Brakes: Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor
ABS: Standard
Wheels: Black, Turbine Cast Aluminium
Front Wheel: 19 in x 3.5 in (483 mm x 89 mm)
Rear Wheel: 18 in x 5 in (457 mm x 127 mm)
Front Tyre: 130/60B19 61H
Rear Tyre: 180/55B18 80H
Rake: 26 degrees

The post Harley Davidson FLHR Road King Special (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki Boulevard C50T (2017-18) https://motorcyclespecifications.com/suzuki-boulevard-c50t-2017-18-specs/ Thu, 06 Apr 2023 19:36:04 +0000 https://motorcyclespecifications.com/?p=47341 The Suzuki Boulevard C50T motorcycle was made in 2017 and 2018. It has a four-stroke, liquid-cooled V-twin engine with a capacity of 805cc. The ignition is electronic and it has

The post Suzuki Boulevard C50T (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki Boulevard C50T motorcycle was made in 2017 and 2018. It has a four-stroke, liquid-cooled V-twin engine with a capacity of 805cc. The ignition is electronic and it has a five-speed transmission with a shaft final drive. The front suspension features telescopic forks while the rear suspension is a link-type single shock with adjustable preload. The front brake is a single disc with a two-piston caliper and the rear brake is a drum. The motorcycle has a wheelbase of 1655 mm and a seat height of 700 mm. It has a wet weight of 292 kg and a fuel capacity of 15.5 liters.


Technical specifications:

Make Model: Suzuki Boulevard C50T

Year: 2017 – 18
Engine: Four stroke, 45 degrees V-Twin
Capacity: 805cc / 49.1 cu-in
Bore x Stroke: 83 x 74.4 mm
Cooling System: Liquid cooled
Compression Ratio: 9.4:1
Lubrication: Wet sump
Induction: Mikuni BDSR34
Ignition: Electronic
Starting: Electric
Max Power: 39 kW / 52 hp @ 6000 rpm
Max Torque: 69 Nm / 7.04 kgf-m / 51 lb-ft @ 3200 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Telescopic forks, coil spring oil damping
Rear Suspension: Link-type single shock, 7-way adjustable preload
Front Wheel Travel: 140 mm / 5.5 in
Rear Wheel Travel: 104 mm / 4.1 in
Front Brakes: Single disc, 2 piston caliper
Rear Brakes: Drum
Front Tyre: 130/90-16M/C 67H, tube type
Rear Tyre: 170/80-15M/C 77H, tube type
Rake: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length: 2500 mm / 98.4 in Width: 985 mm / 38.8 in
Wheelbase: 1655 mm / 65.2 in
Seat Height: 700 mm / 27.6 in.
Ground Clearance: 140 mm / 5.5 in
Wet Weight: 292 kg / 542 lbs
Fuel Capacity: 15.5 Litres / 4.1 US gal

The post Suzuki Boulevard C50T (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Monster 1200R (2017-18) https://motorcyclespecifications.com/ducati-monster-1200r-2017-18-specs/ Thu, 06 Apr 2023 12:02:10 +0000 https://motorcyclespecifications.com/?p=46930 The Ducati Monster 1200R is a high-performance motorcycle with a four-stroke engine, Testastretta L-Twin, DOHC, and four desmodromically actuated valves per cylinder. It has a capacity of 1198cc and a

The post Ducati Monster 1200R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Monster 1200R is a high-performance motorcycle with a four-stroke engine, Testastretta L-Twin, DOHC, and four desmodromically actuated valves per cylinder. It has a capacity of 1198cc and a bore x stroke of 106 x 67.9 mm. The bike is liquid-cooled and has a compression ratio of 13.0:1. The fuel injection system is the Synerject-Continental electronic system with elliptical throttle body. The exhaust system is a lightweight 2-1-2 system with catalytic converter and two lambda probes. The bike is powered by a Marelli electronic ignition and has a maximum power of 113.3 kW / 152 hp @ 9250 rpm and max torque of 131.4 Nm. The transmission is six-speed with wet, multi-plate clutch with hydraulic control.

The frame of the bike is tubular steel Trellis frame attached to the cylinder’s head. The front suspension is Ohlins fully adjustable 48 mm usd forks with a front wheel travel of 130mm, while the rear suspension is progressive linkage with a fully adjustable Ahlins monoshock and an aluminum single-sided swing-arm. The front brakes are 2 x 330 mm Semi-floating discs, radially mounted Brembo Monobloc evo M50 4-piston callipers, and a radial pump with ABS as standard. The rear brakes are a single 245mm disc, 2-piston floating calliper with ABS as standard equipment. The bike runs on a Pirelli Diablo Supercorsa SP tire with a front size of 120/70 – ZR17 and a rear size of 200/55 – ZR17. The front wheel is Tri-W spoke forged alloy 3.50″ x 17″, while the rear wheel is Tri-W spoke forged alloy 6.00″ x 17″.

The wheelbase of the bike is 1509mm, and the rake is 24.3 degrees, with a trail of 89 mm. The seat height is 830mm, and the dry weight of the bike is 180kg. The fuel capacity of the bike is 17.5 liters. The standard equipment includes riding modes, power modes, DSP Ducati Safety Pack (ABS + DTC), RbW, seat cover.


Technical specifications:

Make Model: Ducati Monster 1200R

Year: 2017 – 18
Engine: Four stroke, Testastretta 11 degrees L-Twin, DOHC, 4 Desmodromically actuated valves per cylinder
Capacity: 1198 cc / 73.1 cu-in
Bore x Stroke: 106 x 67.9 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Lubrication: Wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run.
Induction: Synerject-Continental electronic fuel injection system, elliptical throttle body 56 mm equivalent with full Ride-by-Wire
Exhaust: Lightweight 2-1-2 system with catalytic converter and two lambda probes. Twin aluminium mufflers
Ignition: Marelli electronic
Starting: Electric
Max Power: 113.3 kW / 152 hp @ 9250 rpm
Max Torque: 131.4 Nm 13.4 kgf-m / 97 lb-ft @ 7750 rpm
Clutch: Wet, multi-plate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run
Transmission: 6 Speed
Primary Drive: Straight cut gears, ratio 1.84:1
Final Drive: Chain, front sprocket 15; rear sprocket 41
Gear Ratio: 1st 37/15 2nd 30/17 3rd 27/20 4th 24/22 5th 23/24 6th 22/25
Frame: Tubular steel Trellis frame attached to the cylinders head
Front Suspension: Ohlins fully adjustable 48 mm usd forks
Front Wheel Travel: 130 mm /5.1 in
Rear Suspension: Progressive linkage with fully adjustable ~Ahlins monoshock. Aluminium single-sided swingarm
Rear Wheel Travel: 159 mm / 6.2 in
Front Brakes: 2 x 330 mm Semi-floating discs, radially mounted Brembo Monobloc evo M50 4-piston callipers, radial pump with ABS as standard
Rear Brakes: Single 245mm disc, 2-piston floating calliper with ABS as standard equipment
Front Tyre: 120/70 – ZR17 Pirelli Diablo Supercorsa SP
Rear Tyre: 200/55 – ZR17 Pirelli Diablo Supercorsa SP
Front wheel: Tri-W spoke forged alloy 3.50″ x 17″
Rear wheel: Tri-W spoke forged alloy 6.00″ x 17″
Wheelbase: 1509 mm / 59.4 in
Rake: 24.3 degrees
Trail: 89 mm / 3,5 in
Seat Height: 830 mm / 32,7 in
Dry Weight: 180 kg / 396,8 lbs
Wet-Weight: 207 kg / 456,3 lbs
Fuel Capacity: 17.5 Litres / 4.6 US gal / 3.8 Imp gal
Standard Equipment: Riding modes,Power modes, DSP Ducati Safety Pack (ABS + DTC), RbW, seat cover

The post Ducati Monster 1200R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLTRX Road Glidel 2017 (2017-18) https://motorcyclespecifications.com/harley-davidson-fltrx-road-glidel-2017-2017-18-specs/ Thu, 06 Apr 2023 06:00:03 +0000 https://motorcyclespecifications.com/?p=46606 The Harley Davidson FLTRX Road Glide is a 2017-18 motorcycle with a four stroke, V-twin, Milwaukee-Eight 107 engine. It has a capacity of 1746 cc, a bore x stroke of

The post Harley Davidson FLTRX Road Glidel 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLTRX Road Glide is a 2017-18 motorcycle with a four stroke, V-twin, Milwaukee-Eight 107 engine. It has a capacity of 1746 cc, a bore x stroke of 100 x 111 mm, and air cooling. Its compression ratio is 10.0:1 and it features chrome dual exhaust with 4 in. touring mufflers and touring muffler shields. The bike uses electronic sequential port fuel injection (ESPFI) for induction and pressurized, dry-sump lubrication with an oil cooler. The ignition is single-fire, non-wasted, and map-controlled spark ignition, and the bike starts electrically. Its maximum torque is 154 Nm/113.6 lb-ft at 3250 rpm. The clutch is hydraulically actuated with a 9 plate wet system and high-performance spring, while the transmission is a 6-speed cruise drive (R) and the final drive is belt with a 32/68 ratio. The frame is made of mild steel, with a tubular frame, two-piece stamped and welded backbone, cast and forged junctions, twin downtubes, and bolt-on rear frame with forged fender supports, and it has a two-piece drawn and welded section forged junctions MIG welded swingarm. The lean angles are 31o on the left and 32o on the right. The front suspension is a 41.3 mm telescopic triple circuit damping. The rear suspension can be adjusted with low profile air ride rear suspension. The front brakes have two 300mm discs with four piston calipers, while the rear brake has a single 300mm disc with a four piston caliper. The front wheel is an Enforcer Cast Aluminum with 19 in. x 3.5 in. dimensions.


Technical specifications:

Make Model: Harley Davidson FLTRX Road Glide

Year: 2017 – 18
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in.
Bore x Stroke: 100 x 111 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Chrome dual exhaust with 4 in. touring mufflers and touring muffler shields
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm
Clutch: Hydraulically actuated, 9 plate wet, with high performance spring
Transmission: 6 Speed Cruise Drive (R)
Final Drive: Belt, 32/68 ratio
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Primary Drive: Chain, 34/46 ratio
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Lean Angle, Left: 31o
Lean Angle, Right: 32o
Front Suspension: 41.3 mm telescopic, triple circuit damping
Rear Suspension: Low air-adjustable low profile air ride rear suspension
Front Brakes: 2x 300mm discs 4 piston calipers
Rear Brakes: Single 300mm discs 4 piston caliper
Front Wheel: Enforcer Cast Aluminum 19 in. x 3.5 in.

The post Harley Davidson FLTRX Road Glidel 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Street Triple 765R 2017 (2017-18) https://motorcyclespecifications.com/triumph-street-triple-765r-2017-2017-18-specs/ Thu, 06 Apr 2023 05:52:08 +0000 https://motorcyclespecifications.com/?p=46600 The Triumph Street Triple 765R 2017-18 motorcycle has a four-stroke, in-line 3-cylinder, DOHC engine with a capacity of 765 cc. It features a liquid-cooled cooling system, multipoint sequential electronic fuel

The post Triumph Street Triple 765R 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Street Triple 765R 2017-18 motorcycle has a four-stroke, in-line 3-cylinder, DOHC engine with a capacity of 765 cc. It features a liquid-cooled cooling system, multipoint sequential electronic fuel injection with SAI, and electronic throttle control. The bike has a maximum power output of 116 hp / 87 kW @ 12,000rpm and max torque of 56.8 lb-ft/ 77 Nm @ 9,400 rpm. It has a six-speed, close ratio transmission, and a wet, multi-plate, slip and assist clutch. The chassis features a front aluminum beam twin spar and a rear 2 piece high-pressure die-cast frame. The front suspension comprises Showa 41 mm upside-down separate function big piston forks (SF-BPF), with adjustable compression damping, rebound damping, and preload. The rear suspension has a Showa piggyback reservoir monoshock, with adjustable spring preload, compression damping, and rebound damping. The bike features front and rear Brembo brakes and Pirelli Diablo Rosso Corsa tires. The dimensions of the bike are length 2065 mm / 81.2 in, height 1085 mm / 42.7 in (without mirrors), wheelbase 1410 mm / 55.5 in, seat height 825 mm / 32.4 in, and dry weight 165.5 kg / 365 lbs. The bike has a fuel capacity of 17.4 liters / 4.6 US gal / 3.8 Imp gal and features various equipment, including ride-by-wire throttle, switchable ABS, switchable traction control, and multiple riding modes. It has an updated LCD instrument pack, LED headlights, and an all-new bodywork design.


Technical specifications:

Make Model: Triumph Street Triple 765R

Year: 2017 – 18
Engine: Four stroke, in-line 3-cylinder, DOHC, 4 valve per cylinder
Capacity: 765 cc / 46.6 cu-in
Bore x Stroke: 78 x 53.4 mm
Cooling System: Liquid-cooled
Compression Ratio: 12.65:1
Lubrication: Wet sump
Induction: Multipoint sequential electronic fuel injection with SAI. Electronic throttle control
Exhaust: Stainless steel 3 into 1 exhaust system low single sided stainless steel silencer
Ignition: Digital – inductive type
Starting: Electric
Max Power: 116 hp / 87 kW @ 12,000rpm
Max Torque: 56.8 lb-ft / 77 Nm @ 9,400 rpm
Clutch: Wet, multi-plate, slip and assist clutch
Transmission: 6 Speed, close ratio
Final Drive: O ring chain
Frame: Front Aluminium beam twin spar. Rear 2 piece high pressure die cast
Front Suspension: Showa 41 mm upside down separate function big piston forks (SF-BPF). Adjustable compression damping, rebound damping and preload.
Front Wheel Travel: 115 mm / 4.5 in
Rear Suspension: Showa piggyback reservoir monoshock. Adjustable spring preload (lock-rings), compression damping and rebound damping.
Rear Wheel Travel: 131 mm / 5.1 in
Front Brakes: 2 x 310 mm floating discs, Brembo M4.32 4-piston radial monobloc callipers
Rear Brakes: Single 220 mm fixed disc, Brembo single piston sliding calliper
Front Wheels: 3.5 x 17 cast
Rear Wheels: 5.5 x 17 cast
Front Tyre: 120/70 ZR17 Pirelli Diablo Rosso Corsa
Rear Tyre: 180/55 ZR17 Pirelli Diablo Rosso Corsa
Rake: 23.9 o
Trail: 100 mm / 3.9 in
Dimensions: Length 2065 mm / 81.2 in Height 1085 mm / 42.7 in (without mirrors)
Wheelbase: 1410 mm / 55.5 in
Seat Height: 825 mm / 32.4 in
Dry Weight: 165.5 kg / 365 lbs
Fuel Capacity: 17.4 Litres / 4.6 US gal / 3.8 Imp gal
Equipment: Ride-by-wire throttle ABS Switchable traction control All-new gullwing swingarm Rain and Road riding modes LED position light bulb headlights Updated LCD instrument pack All-new bodywork including new flyscreen with integrated air intake, and new inner and outer radiator cowls Sporty twin-seat design Painted rear bodywork New black powder coated main frame, subframe and swingarm Switchable ABS Slip and assist clutch 5 full-colour TFT instrument pack Additional Sport and Rider programmable riding modes (Rain, Road, Sport and Rider) High-spec onboard computer New switch cubes with 5-way joystick control DRL headlights Self-cancelling indicators Sporty body-coloured flyscreen with integrated air intake Premium seat stitching and vinyl Red rear subframe, wheel pinstripes and detailing

The post Triumph Street Triple 765R 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki GSX-S 750Z 2018 (2017-18) https://motorcyclespecifications.com/suzuki-gsx-s-750z-2018-2017-18-specs/ Thu, 06 Apr 2023 04:20:10 +0000 https://motorcyclespecifications.com/?p=46513 The Suzuki GSX-S 750Z motorcycle was manufactured from 2017-2018 and features a four stroke, transverse four cylinder, DOHC engine with a capacity of 749 cc/45.7 cubic inches. It has a

The post Suzuki GSX-S 750Z 2018 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki GSX-S 750Z motorcycle was manufactured from 2017-2018 and features a four stroke, transverse four cylinder, DOHC engine with a capacity of 749 cc/45.7 cubic inches. It has a maximum power of 73.8 kW/99.1 hp at 10170 rpm and a maximum torque of 73.6 Nm/7.5 lb-ft/54.3 lb.-ft at 9060 rpm. The bike has Suzuki Fuel Injection with SDTV and an electronic ignition system, as well as Suzuki Advanced Traction Control. Other features include a wet sump lubrication system, a 6-speed transmission, and a chain final drive. The frame is made from aluminum twin spar and the front suspension is inverted telescopic, coil spring, oil damped with a travel of 120 mm/4.7 in, while the rear suspension is link type, coil spring, oil damped and seven-way adjustable with a travel of 130 mm/5.1 in. The front brakes feature two 310 mm full floating discs with 4-piston calipers, while the rear brake is a single 220 mm disc with a Nissin 1-piston caliper. The dimensions include a length of 2125 mm/83.6 in, a width of 785 mm/30.9 in, and a wheelbase of 1455 mm/57.2 in. It has a seat height of 820 mm/32.2 in, a ground clearance of 135 mm/5.1 in, and a wet weight of 212.7 kg/469 lbs. The fuel capacity is 16 liters/4.2 US gal/3.7 Imp gal.


Technical specifications:

Make Model: Suzuki GSX-S 750Z

Year: 2017 – 18
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder, TSCC
Capacity: 749 cc / 45.7 cub. in
Bore x Stroke: 72.0 x 46.0 mm
Compression Ratio: 12.3:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Suzuki Fuel Injection with SDTV
Ignition: Electronic ignition (transistorised)
Traction Control: Suzuki Advanced Traction Control
Starting: Electric
Max Power: 73.8 kW / 99.1 hp @ 10170 rpm
Max Torque: 73.6 Nm / 7.5 lb-ft / 54.3 lb.-ft. / @ 9060 rpm
Clutch: Wet, multi-plate type
Transmission: 6 Speed, constant mesh
Final Drive: Chain, DID50VAZ, 114 links
Frame: Aluminium, twin spar
Front Suspension: Inverted telescopic, coil spring, oil damped
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Link type, coil spring, oil damped, 7-way adjustable
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 310 mm Full floating discs, 4-piston calipers
Rear Brakes: Single 220 mm disc, Nissin, 1-piston caliper
Front Tyre: 120/70ZR17M/C (58W), tubeless
Rear Tyre: 180/55ZR17M/C (73W), tubeless
Dimensions: Length 2125 mm / 83.6 in Width 785 mm / 30.9 in
Wheelbase: 1455 mm / 57.2 in
Seat Height: 820 mm / 32.2 in
Ground Clearance: 135 mm / 5.1 in
Wet Weight: 212.7 kg / 469 lbs
Fuel Capacity: 16 Litres / 4.2 US gal / 3.7 Imp gal

The post Suzuki GSX-S 750Z 2018 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki GSX-S 1000F 2017 (2017-18) https://motorcyclespecifications.com/suzuki-gsx-s-1000f-2017-2017-18-specs/ Thu, 06 Apr 2023 03:02:04 +0000 https://motorcyclespecifications.com/?p=46444 The Suzuki GSX-S 1000F motorcycle is a 2017-18 model with a four-stroke, transverse four-cylinder engine, and a capacity of 998.6 cc. It has a compression ratio of 12.2:1 and can

The post Suzuki GSX-S 1000F 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki GSX-S 1000F motorcycle is a 2017-18 model with a four-stroke, transverse four-cylinder engine, and a capacity of 998.6 cc. It has a compression ratio of 12.2:1 and can produce a maximum power of 150 hp and a maximum torque of 108 Nm. The bike features a hydraulically-actuated multiplate wet clutch and a 6-speed transmission, with a final drive ratio of 2.588. The frame is made of aluminum and is a twin spar design, with inverted telescopic front suspension and link-type rear suspension. The front brakes consist of two 310mm Brembo discs and 4 piston Brembo calipers, while the rear brake features a single 220mm disc. The bike comes with tubeless tires: 120/70ZR17M/C in the front and 190/50ZR17M/C in the rear. The Suzuki GSX-S 1000F has a trail of 100mm and a ground clearance of 140mm. It has a wet weight of 207kg (with ABS) and a fuel capacity of 17 liters. The bike has a sleek design with a length of 2115mm, a width of 795mm, and a height of 1180mm, with a wheelbase of 1460mm and a seat height of 810mm.


Technical specifications:

Make Model: Suzuki GSX-S 1000F

Year: 2017 – 18
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder, TSCC
Capacity: 998.6 cc / 60.9 cub. in
Bore x Stroke: 73.4 x 59.0 mm
Compression Ratio: 12.2:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Oil Capacity: 3.4 L / 3.6 US qt / 3.0 Imp qt
Induction: Fuel Injection
Ignition: Electronic ignition (transistorised)
Starting: Electric
Max Power: 150 hp / 111.8 kW @ 10000 rpm
Max Torque: 108 Nm / 79.6 lb-ft @ 9500 rpm
Clutch: Hydraulically-actuated multiplate wet clutch
Transmission: 6 Speed, constant mesh
Final Drive: Chain, DID50VAZ, 114 links
Primary Reduction Ratio: 1.553 (73/47)
Final Reduction Ratio: 2.588 ( 44/17)
Frame: Aluminium, twin spar
Front Suspension: Inverted telescopic, coil spring, oil damped
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Link type, coil spring, oil damped
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x 310mm Brembo discs, 4 piston Brembo calipers / ABS
Rear Brakes: Single 220 mm disc / ABS
Front Tyre: 120/70ZR17M/C (58W) tubeless
Rear Tyre: 190/50ZR17M/C (73W) tubeless
Rake: 25.0 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2115 mm / 83. 2 in Width 795 mm / 31.2 in Height 1180 mm / 46.5 in
Wheelbase: 1460 mm / 57.5 in
Seat Height: 810 mm / 31.9 in
Ground clearance: 140 mm / 5.5 in.
Wet Weight: 207 kg / 456.4 lbs – ABS 209 kg / 460.8 lbs
Fuel Capacity: 17 Litres / 4.4 US gal / 3.7 Imp gal

The post Suzuki GSX-S 1000F 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Multistrada 1200 Enduro (2017-18) https://motorcyclespecifications.com/ducati-multistrada-1200-enduro-2017-18-specs/ Thu, 06 Apr 2023 03:00:02 +0000 https://motorcyclespecifications.com/?p=46442 The Ducati Multistrada 1200S DVT Enduro motorcycle was produced from 2017-18. It has a four-stroke, 90-degree L twin cylinder 1198.4 cc engine with Testastretta DVT and Desmodromic Variable Timing. The

The post Ducati Multistrada 1200 Enduro (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Multistrada 1200S DVT Enduro motorcycle was produced from 2017-18. It has a four-stroke, 90-degree L twin cylinder 1198.4 cc engine with Testastretta DVT and Desmodromic Variable Timing. The liquid-cooled engine has an 11.5:1 compression ratio and is lubricated with wet sump. The motorcycle has a six-speed transmission and a final drive chain. The front suspension uses a Sachs 48 mm fully adjustable USD fork, while the rear suspension has a fully adjustable Sachs monoshock unit. The motorcycle has a tubular steel Trellis frame and a ground clearance of 205 mm. The front brakes have two 330 mm semi-floating discs with Brembo monobloc Evo M50 4-piston callipers, while the rear brakes have a single 265 mm disc. The motorcycle has cornering ABS as standard equipment. The front wheel is a tubeless spoked wheel in a light alloy, while the rear wheel is a tubeless spoked wheel in a light alloy, and both use Pirelli Scorpion Trail II tires. The motorcycle has a rake of 25 degrees and a seat height of 870 mm. The dry weight of the motorcycle is 225 kg, while the wet weight is 254 kg. The motorcycle has a fuel capacity of 30 litres.


Technical specifications:

Make Model: Ducati Multistrada 1200S DVT Enduro

Year: 2017 – 18
Engine: Four stroke, 90 degrees L twin cylinders,Testastretta DVT with Desmodromic Variable Timing, DOHC, 4 valves per cylinder
Capacity: 1198.4 cc / 73.1 cu-in
Bore x Stroke: 106 x 67.9 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Exhaust: Stainless steel muffler with catalytic converter and 2 lambda probes, aluminium tail pipes
Induction: Bosch electronic fuel injection system, elliptical throttle bodies with Ride-by-Wire, equivalent diameter 56 mm
Ignition: Marelli electronic
Start5ing: Electric
Max Power: 113.3 kW / 152 hp @ 9500 rpm
Max Torque: 136 Nm / 13.9 kgf-m / 100.3 lb-ft @ 7500 rpm
Clutch: Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run
Transmission: 6 Speed
Final Drive: Chain; front sprocket 15; rear sprocket 40
Straight Cut Gear Ratio: 1.84:1
Gear Ratio: 1st 37/15, 2nd 30/17, 3rd 27/20, 4th 24/22, 5th 23/24, 6th 22/25
Frame: Tubular steel Trellis frame
Front Suspension: Sachs 48 mm fully adjustable usd fork. Electronic compression and rebound damping adjustment with Ducati Skyhook suspension Evo (DSS)
Front Wheel Travel: 200 mm / 7.9 in
Rear Suspension: Fully adjustable Sachs monoshock unit. Electronic compression and rebound damping adjustment with Ducati Skyhook suspension Evo (DSS). Aluminium single-sided swingarm
Rear Wheel Travel: 200 mm / 7.9 in
Front Brakes: 2 x 330 mm Semi-floating discs, radially mounted Brembo monobloc Evo M50 4-piston callipers, 2-pad, radial pump with cornering ABS as standard equipment
Rear Brakes: Single 265 mm disc, 2-piston floating calliper, with cornering ABS as standard equipment
Front Wheel: Tubless spoked wheel in light alloy, 3.0 x 19″
Rear Wheel: Tubeless spoked wheel in light alloy, 4.50 x 17″
Front Tyre: Pirelli Scopion Trail II 120/70 R19
Rear Tyre: Pirelli Scorpion Trail II 170/60 R17
Rake: 25 degrees
Trail: 110 mm / 4.33 in
Wheelbase: 1594 mm / 62.8 in
Ground Clearance: 205 mm / 8.1 in
Seat Height: 870 mm / 34.3 in
Dry Weight: 225 kg / 496 lbs
Wet Weight: 254 kg / 560 lbs
Fuel Capacity: 30 Litres / 7.9 US gal / 6.6 Imp gal

The post Ducati Multistrada 1200 Enduro (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Concours (2017-18) https://motorcyclespecifications.com/kawasaki-concours-2017-18-specs/ Thu, 06 Apr 2023 01:59:10 +0000 https://motorcyclespecifications.com/?p=46388 The Kawasaki GTR 1400 Concours 14, manufactured from 2017 to 2018, is a four stroke, transverse four-cylinder motorcycle with a capacity of 1352cc. It has a liquid-cooled engine with a

The post Kawasaki Concours (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki GTR 1400 Concours 14, manufactured from 2017 to 2018, is a four stroke, transverse four-cylinder motorcycle with a capacity of 1352cc. It has a liquid-cooled engine with a compression ratio of 10.7:1 and induction through DFI (R) with four 40mm throttle bodies. The ignition is TCBI with Digital Advance, and it has electric starting. The bike has a maximum power of and a maximum torque of 138.3 Nm at 6200rpm, with wet multi-disc manual clutch and a 6-speed transmission.

The frame of the motorcycle is monocoque aluminum, with front suspension through a 43mm inverted, telescopic fork that has adjustable rebound damping, and spring preload. Front wheel travel is 113mm while rear suspension Tetra-Lever has stepless rebound damping adjustment and remote spring preload adjuster; rear wheel travel is 136mm. The motorcycle has front brakes using 2X 310mm discs with 4 piston calipers with ABS, while the rear uses a single 270mm disc with 2 piston caliper and ABS.

Additionally, the motorcycle has a wheelbase of 1520mm, with ground clearance of 125mm and a seat height of 815mm. It has a wet weight of 313kg, and a fuel capacity of 22 litres / 5.8 US gal. The dimensions of the motorcycle are length of 2230mm, width of 1000mm, and a height of 1343mm to 1465mm (in high position) with a rake of 26.1 degrees and trail of 112mm.


Technical specifications:

Make Model: Kawasaki GTR 1400 Concours 14

Year: 2017 – 18
Engine: Four stroke, transverse four cylinders, DOHC, 4 valves per cylinder
Capacity: 1352 cc / 82.5 cu-in
Bore x Stroke: 84 x 61 mm
Cooling: Liquid cooled
Compression Ratio: 10.7;1
Induction: DFI (R) with four 40mm throttle bodies
Lubrication: Forced lubrication, wet sump
Ignition: TCBI with Digital Advance
Starting: Electric
Max Power:
Max Torque: 138.3 Nm / 102.0 lb-ft @ 6200 rpm
Clutch: Wet multi-disc manual
Transmission: 6 Speed
Final Drive: Tetra-Lever shaft drive
Frame: Monocoque Aluminum
Front Suspension: Front Suspension / Wheel Travel 43mm inverted, telescopic fork with adjustable rebound damping and spring preload
Front Wheel Travel: 113 mm / 4.4 in
Rear Suspension: Tetra-Lever with stepless rebound damping adjustment and remote spring preload adjuster
Rear Wheel Travel: 136 mm / 5.4 in
Front Brakes: 2X 310mm discs 4 piston calipers, ABS
Rear Brakes: Single 270mm disc 2 piston caliper. ABS
Front Tyre: 120/70- ZR17
Rear Tyre: 190/50 -ZR17
Rake: 26.1 degrees
Trail: 112 mm / 4.4 in
Dimensions: Length 2230 mm / 87.8 in. Width 1000 mm / 39.4 in Height 1343 mm / 52.9 in. – 1465 mm / 55.3 in. (High position)
Wheelbase: 1520 mm / 59.8 in
Ground Clearance: 125 mm / 4.9 in
Seat Height: 815 mm / 32.1 in.
Wet Weight: 313 kg / 690.2 lbs
Fuel Capacity: 22 Litres / 5.8 US gal

The post Kawasaki Concours (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Ninja H2 Carbon Limited Edition (2017-18) https://motorcyclespecifications.com/kawasaki-ninja-h2-carbon-limited-edition-2017-18-specs/ Thu, 06 Apr 2023 00:50:14 +0000 https://motorcyclespecifications.com/?p=46321 The Kawasaki ZX 1000 Ninja H2 Carbon Limited Edition motorcycle was released in 2017-18 with a four-stroke transverse four-cylinder DOHC 16 valve engine that utilizes a supercharger centrifugal scroll-type system.

The post Kawasaki Ninja H2 Carbon Limited Edition (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki ZX 1000 Ninja H2 Carbon Limited Edition motorcycle was released in 2017-18 with a four-stroke transverse four-cylinder DOHC 16 valve engine that utilizes a supercharger centrifugal scroll-type system. It has a capacity of 998 cc and a compression ratio of 8.5:1. The bike delivers a maximum power of 200 hp at 12500 rpm and a maximum torque of 133 Nm at 10500 rpm through its six-speed transmission and chain final drive.

The trellis high-tensile steel frame has a swingarm mounting plate, and the front suspension features a 43 mm inverted fork with rebound and compression damping along with spring preload adjustability and top-out springs. The rear suspension is the Uni-Trak system with gas-charged shock, piggyback reservoir, dual-range compression damping, rebound damping, and preload adjustability, along with a top-out spring. The bike has dual 330 mm discs with radial-mount, opposed four-piston calipers, and dual semi-floating front brakes while the rear brakes have a single 250mm disc with opposed two-piston calipers. The tyres are 120/70 ZR17 M/C (58W) for the front and 200/55 ZR17 M/C (78W) at the rear, and the bike has a ground clearance of 130 mm.

The Kawasaki Ninja H2 Carbon Limited Edition measures 2083 mm in length, 770 mm in width, and 1125 mm in height, with a wheelbase of 1455 mm. It has a wet weight of 238 kg and a fuel capacity of 17 litres, with a seat height of 826 mm.


Technical specifications:

Make Model: Kawasaki ZX 1000 Ninja H2 Carbon Limited Edition

Year: 2017 – 18
Engine: Four Stroke, transverse four cylinder, DOHC, 16 valve, Supercharger Centrifugal, scroll-type
Capacity: 998 cc / 60.9 cub in
Bore x Stroke: 76 x 55 mm
Cooling System: Liquid cooled
Compression Ratio: 8.5:1
Lubrication: Forced, wet sump with oil cooler
Exhaust: 4-1-2
Induction: 50 mm x 4 with dual injection,
Ignition: Digital
Starting: Electric
Max Power: 200 hp / 146.0 kW) @ 12500 rpm
Max Torque: 133 Nm / 98.1 ft-lb @ 10500 rpm
Transmission: 6-Speed
Final Drive: Chain
Frame: Trellis, high-tensile steel, with swingarm mounting plate
Front Suspension: 43 mm Inverted fork with rebound and compression damping, spring preload adjustability and top-out springs
Front Wheel Travel: 119 mm / 4.7 in
Rear Suspension: Uni-Trak (R) with gas-charged shock, piggyback reservoir, dual-range (high/low-speed) compression damping, rebound damping and preload adjustability, and top-out spring
Rear Wheel Travel: 135 mm / 5.3 in
Front Brakes: Dual 330 mm discs, radial-mount, opposed 4-piston calipers, dual semi-floating
Rear Brakes: Single 250mm disc, opposed 2-piston calipers,
Front Tyre: 120/70 ZR17 M/C (58W)
Rear Tyre: 200/55 ZR17 M/C (78W)
Rake: 24.4 degrees
Trail: 101.6 mm / 4.0 in
Dimensions: Length 2083 mm / 82.0 in Width 770 mm / 30.3 in Height 1125 mm / 44.3 in
Wheelbase: 1455 mm / 57.3 in
Ground Clearance: 130 mm / 5.1 in
Seat Height: 826 mm / 32.5 in
Wet Weight: 238 kg / 524.7 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Kawasaki Ninja H2 Carbon Limited Edition (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Z125 Pro (2017-18) https://motorcyclespecifications.com/kawasaki-z125-pro-2017-18-specs/ Wed, 05 Apr 2023 19:15:01 +0000 https://motorcyclespecifications.com/?p=46018 The Kawasaki Z125 Pro is a 2017-18 motorcycle with a four-stroke, single-cylinder, SOHC, 2-valve engine that has a capacity of 125cc/7.6 cu in. The bore x stroke is 56.0 x

The post Kawasaki Z125 Pro (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Z125 Pro is a 2017-18 motorcycle with a four-stroke, single-cylinder, SOHC, 2-valve engine that has a capacity of 125cc/7.6 cu in. The bore x stroke is 56.0 x 50.6mm and has a compression ratio of 9.8:1. The bike is air-cooled and has DFI (R) with 24mm throttle body induction and TCBI with electronic advance ignition, as well as an electric starting system. It has a four-speed, return shift transmission, and a sealed chain final drive. The front suspension is a 30mm inverted telescopic fork, while the rear suspension is a swingarm, single shock. The front and rear brakes are a single 200mm petal-style disc and a single 184mm petal-style disc, respectively. The front tyre is 100/90-12, and the rear tyre is 120/70-12. The rake is 26 degrees, and the trail is 68.5 mm / 2.7 in. The bike has a length of 1699.2 mm / 66.9 in, a width of 749.3 mm / 29.5 in, and a height of 1005.8 mm / 39.6 in. The wheelbase is 1176.0 mm / 46.3 in, while the seat height is 749.3 mm / 29.5 in. The bike has a wet weight of 102 kg / 224.8 lbs and a fuel capacity of 7.5 litres / 2.0 US gal.


Technical specifications:

Make Model: Kawasaki Z125 Pro

Year: 2017 – 18
Engine: Four stroke, single cylinder, SOHC, 2 valve.
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 56.0 x 50.6mm
Compression Ratio: 9.8:1
Cooling System: Air cooled
Induction: DFI (R) with 24mm throttle body
Ignition: TCBI with electronic advance
Starting: Electric
Max Power: NA
Max Torque: NA
Transmission: 4 Speed, return shift
Final Drive: Sealed chain
Front Suspension: 30mm Inverted telescopic fork
Front Wheel Travel: 99 mm / 3.9 in
Rear Suspension: Swingarm, single shock
Rear Wheel Travel: 104 mm / 4.1 in
Front Brakes: Single 200mm petal-style disc
Rear Brakes: Single 184mm petal-style disc
Front Tyre: 100/90-12
Rear Tyre: 120/70-12
Rake: 26 degrees
Trail: 68.5 mm / 2.7 in.
Dimensions: Length 1699.2 mm / 66.9 in Width 749.3 mm / 29.5 in. Height 1005.8 mm / 39.6 in
Wheelbase: 1176.0 mm / 46.3 in.
Seat Height: 749.3 mm / 29.5 in.
Wet Weight: 102 kg / 224.8 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal

The post Kawasaki Z125 Pro (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
BMW K 1600 GT (2017-18) https://motorcyclespecifications.com/bmw-k-1600-gt-2017-18-specs/ Wed, 05 Apr 2023 17:09:05 +0000 https://motorcyclespecifications.com/?p=45907 The BMW K 1600 GT is a motorcycle that was produced from 2017 to 2018. It features a four-stroke, transverse six-cylinder engine with 4 valves per cylinder and a capacity

The post BMW K 1600 GT (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The BMW K 1600 GT is a motorcycle that was produced from 2017 to 2018. It features a four-stroke, transverse six-cylinder engine with 4 valves per cylinder and a capacity of 1649cc. The compression ratio is 12.2:1, and it requires premium unleaded fuel. The cooling system is liquid cooled, and the induction features a 52mm throttle valve diameter with BMS-X. The ignition is digital CDI, and the alternator has a W 700 output. The bike has a maximum power of 118 kW/160.5 hp at 7750 rpm and maximum torque of 175 Nm/17.8 kgf-m/129 lb-ft at 5250 rpm.

The clutch is a multiplate wet clutch, hydraulically activated, and the transmission is a constant-mesh 6-speed gearbox with helical cut. Final drive is through a shaft. The frame is a bridge-type, cast aluminum load-bearing engine, and the front suspension features dual longitudinal control arm with Dynamic ESA semi-active suspension with road and dynamic modes. The rear suspension is a paralever (single-sided swing arm) with central spring strut, rebound/continuously variable, and Dynamic ESA semi-active suspension with road and dynamic modes.

Other features include BMW Motorrad ABS (partial integral), front and rear disc brakes, cast aluminum wheels, and a fuel capacity of 26.5 liters/7.0 US ga. The dry weigh is 295 kg/650 lbs, while the wet weight is 319 kg/703 lbs. Seat height is 810-830mm/31.9-32.7” standard with options for different heights. The bike features a total length of 2324mm/91.5”, a width of 1000mm/39.4” (including mirrors), and a height of 1465mm/57.7” (excluding mirrors).


Technical specifications:

Make Model: BMW K 1600 GT

Year: 2017 – 18
Engine: Four stroke, transverse six cylinder, 4 valves per cylinder
Capacity: 1649 cc / 100.6 cu in.
Bore x Stroke: 72 x 67.5 mm
Compression Ratio: 12.2:1
Fuel: Premium unleaded (95 RON)
Cooling System: Liquid cooled
Induction: 52mm Throttle valve diameter, BMS-X
Ignition: Digital CDI
Alternator: W 700
Battery: 12 V / 19 Ah maintenance free
Starting: Electric
Max Power: 118 kW / 160.5 hp @ 7750 rpm
Max Torque: 175 Nm / 17.8 kgf-m / 129 lb-ft @ 5250 rpm
Clutch: Multiplate wet clutch, hydraulically activated
Transmission: Constant-mesh 6-speed gearbox, helical cut
Final Drive: Shaft
Gear Ratio: 1st 2.23 / 2nd 1.641 / 3rd 1.319 / 4th 1.101 / 5th 0.926 / 6th 0.788
Frame: Bridge-type frame, cast aluminium, load-bearing engine
Front Suspension: Dual longitudinal control arm, Dynamic ESA semi-active suspension (road and dynamic modes)
Front Wheel Travel: 115 mm / 4.9 in
Rear Suspension: Paralever (single-sided swing arm), central spring strut, rebound/continuously variable, Dynamic ESA semi-active suspension (road and dynamic modes)
Rear Wheel Travel: 135 mm / 5.3 in
Front Brakes: 2 x 320mm discs, 4 piston calipers
Rear Brakes: Single 320mm disc, 2 piston caliper
ABS: BMW Motorrad ABS (partial integral)
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Front Rim: 3.0 x 17
Rear Rim: 6.00 x 17
Wheels: Cast aluminium wheels
Castor: 108.4 mm / 4.3 in
Steering Head Angle: 62.2 degrees
Dimensions: Length: 2324 m / 91.5 in Width: 1000 mm / 39.4 in (incl. mirrors) Height: 1465 mm / 57.7 in (excl. mirrors)
Wheelbase: 1680 mm / 66.1 in
Seat Height: 810 – 830 mm / 31.9 – 32.7″ (standard) 780 – 800 mm / 30.7 – 31.5″(optional rider seat) 750 mm / 29.5″ (special accessory seat, single-section)
Dry Weight: 295 kg / 650 lbs
Wet Weight: 319 kg / 703 lbs
Fuel Capacity: 26.5 Litres / 7.0 US gal
Reserve: 4 Litres / 1.1 US gal

The post BMW K 1600 GT (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki VN900 Custom (2017-18) https://motorcyclespecifications.com/kawasaki-vn900-custom-2017-18-specs/ Wed, 05 Apr 2023 12:12:01 +0000 https://motorcyclespecifications.com/?p=45633 The Kawasaki VN 900 Vulcan Custom is a 2017-18 motorcycle featuring a four-stroke, V-twin, SOHC engine with a 903cc/49cu-in capacity, 4 valves per cylinder, and liquid cooling system. The bike

The post Kawasaki VN900 Custom (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki VN 900 Vulcan Custom is a 2017-18 motorcycle featuring a four-stroke, V-twin, SOHC engine with a 903cc/49cu-in capacity, 4 valves per cylinder, and liquid cooling system. The bike has a compression ratio of 9.5:1 and uses fuel injection with dual throttles. It also has a digital ignition and an electric start. The bike’s maximum power is 37 kW/50 hp at 5700 rpm, and its maximum torque is 78 Nm/8.0 kg-fm at 3700 rpm. The bike’s transmission is a 5-speed manual with a wet multi-disc clutch and a final drive belt. Its frame is a double-cradle steel design, and it has a 41mm telescopic fork front suspension and Uni-Trak rear suspension with 7-way preload adjustments. Front and rear brakes are single-disc, and the front/rear tire sizes are 80/90-21 and 180/70-15, respectively. The bike’s dimensions are 2405mm/94.7in (length), 894mm/35.2in (width), and 1120mm/44.1in (height), with a wheelbase measuring 1646mm/64.8in and a seat height of 685mm/27.0in. The bike’s wet weight is 277kg/610.8lbs and its fuel capacity is 20 liters/5.3 US gallons.


Technical specifications:

Make Model: Kawasaki VN 900 Vulcan Custom

Year: 2017 – 18
Engine: Four stroke, V-twin, SOHC, 4 valves per cylinder
Capacity: 903 cc / 49 cu-in
Bore x Stroke: 88.0 x 74.2 mm
Cooling System: Liquid cooled
Compression Ratio: 9.5:1
Induction: 2x 34mm ~A, Fuel injection with dual throttles
Ignition: Digital
Starting: Electric
Max Power: 37 kW / 50 hp @ 5700 rpm
Max Torque: 78 Nm / 8.0 kg-fm @ 3700 rpm
Clutch: Wet multi-disc, manual
Transmission: 5 Speed
Final Drive: Belt
Frame: Double-cradle, steel
Front Suspension: 41mm telescopic fork with 7-way preload
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Uni-Trak with 7-way adjustable preload
Rear Wheel Travel: 103 mm / 4.1 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 270mm disc
Front Tyre: 80/90 -21
Rear Tyre: 180/70 -15
Dimensions: Length 2405 mm / 94.7 ub Width 894 mm / 35.2 in Heigh 1120 mm / 44.1 in
Wheelbase: 1646 mm / 64.8 in
Seat Height: 685 mm / 27.0 in
Wet Weight: 277 kg / 610.8 lbs
Fuel Capacity: 20 Litres / 5.3 US gal

The post Kawasaki VN900 Custom (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Hypermotard 939 (2017-18) https://motorcyclespecifications.com/ducati-hypermotard-939-2017-18-specs/ Wed, 05 Apr 2023 12:08:13 +0000 https://motorcyclespecifications.com/?p=45629 The Ducati Hypermotard 939 (2017-18) is a motorcycle with a Testastretta 11-degree L-twin cylinder engine, 4 valves per cylinder, and a Desmodromic system. It has a capacity of 937cc/57.2 cu

The post Ducati Hypermotard 939 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Hypermotard 939 (2017-18) is a motorcycle with a Testastretta 11-degree L-twin cylinder engine, 4 valves per cylinder, and a Desmodromic system. It has a capacity of 937cc/57.2 cu in and a compression ratio of 13.1:1. The bike features a Magneti Marelli electronic fuel injection system with a full Ride by Wire system and an electronic ignition. It has a maximum power of 82 kW/110 hp at 9000 rpm and a max torque of 97.9 Nm/9.98 kgf-m at 7500 rpm. The Ducati Hypermotard 939 has a wet multiplate clutch and transmission with six speeds. Its frame is a tubular steel trellis frame, and it features a 43mm USD fork suspension system with 170mm/6.7in of front wheel travel and a progressive linkage with adjustable spring preload and rebound damping Sachs monoshock rear suspension system with 150mm/5.9in of rear wheel travel. The bike also comes with a 2 x 320mm semi-floating discs, radially mounted Brembo monobloc calipers, 4-piston 2-pad, axial pump with adjustable lever, and Bosch ABS as standard front brake system and a 245mm disc, 2-piston caliper, with Bosch ABS as standard rear brake system. It has a 10-spoke in light alloy 3.50″ x 17″ front wheel and a 10-spoke in light alloy 5.50″ x 17″ rear wheel, both with Pirelli Diablo Rosso II tires. The bike has a rake of 25.5o and a trail of 104mm/4.1in. Its wheelbase measures 1493mm/58.8in and it has a seat height of 870mm/34.2in. The dry weight of the bike is 181kg/399lbs and the wet weight is 204kg/450lbs. It has a fuel capacity of 16 liters/4.2 US gallons.


Technical specifications:

Make Model: Ducati Hypermotard 939

Year: 2017 – 18
Engine: Testastretta 11 degrees, L-Twin cylinder, 4 valve per cylinder, Desmodromic
Capacity: 937 cc / 57.2 cu in
Bore x Stroke: 94 x 67.5 mm
Cooling System: Liquid cooled
Compression Ratio: 13.1:1
Exhaust: Single stainless steel muffler with catalytic converter and two lambda probes
Induction: Magneti Marelli electronic fuel injection system. Throttle bodies with full Ride by Wire system
Ignition: Electronic
Starting: Electric
Max Power: 82 kW / 110 hp @ 9000 rpm
Max Torque: 97.9 Nm / 9.98 kgf-m / 72.2 lb-ft @ 7500 rpm
Clutch: Wet multiplate clutch mechanically operated, self-servo action on drive, slipper action on over-run
Transmission: 6-Speed
Final Drive: Final drive Chain, front sprocket 15, rear sprocket 43
Primary Drive: Straight cut gears, 1.85:1 ratio
Frame: Tubular steel Trellis frame
Front Suspension: 43mm USD forks
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Progressive linkage with adjustable spring preload and rebound damping Sachs monoshock. Aluminium single-sided swingarm
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: 2 x 320 mm Semi-floating discs, radially mounted Brembo monobloc callipers, 4-piston 2-pad, axial pump with adjustable lever, with Bosch ABS as standard
Rear Brakes: 245 mm Disc, 2-piston caliper, with Bosch ABS as standard
Front Wheel: 10-Spoke in light alloy 3.50″ x 17″
Rear Wheel: 10-Spoke in light alloy 5.50″ x 17″
Front Tyre: Pirelli Diablo Rosso II, 120/70 ZR17
Rear Tyre: Pirelli Diablo Rosso II, 180/55 ZR17
Rake: 25.5o
Trail: 104 mm / 4.1 in
Wheelbase: 1493 mm / 58.8 in
Seat Height: 870 mm / 34.2 in
Dry Weight: 181 kg / 399 lbs
Wet Weight: 204 kg / 450 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Ducati Hypermotard 939 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson Tri Glide Ultra 2017 (2017-18) https://motorcyclespecifications.com/harley-davidson-tri-glide-ultra-2017-2017-18-specs/ Wed, 05 Apr 2023 10:50:01 +0000 https://motorcyclespecifications.com/?p=45558 The Harley Davidson FLHTCUTG Tri Glide Ultra is a three-wheeled motorcycle with a four-stroke, V-twin engine with a capacity of 1746 cc. The engine is air-cooled, has pushrod-operated overhead valves,

The post Harley Davidson Tri Glide Ultra 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHTCUTG Tri Glide Ultra is a three-wheeled motorcycle with a four-stroke, V-twin engine with a capacity of 1746 cc. The engine is air-cooled, has pushrod-operated overhead valves, and includes hydraulic, self-adjusting lifters with 4 valves per cylinder. The motorcycle is equipped with a six-speed transmission and a belt final drive. The suspension system includes a telescopic triple-circuit damping front suspension and an air-adjustable rear suspension. The bike is built on a mild steel frame with twin downtubes and rectangular tube sections swingarm. The motorcycle features a 26-degree rake and 100mm trail. The seat height is unladen at 735mm and laden at 688mm. The front and rear wheels are black, 7-spoke cast aluminum with MT90B16 72H and P205/65R15 tires, respectively. The motorcycle has a dry weight of 545kg and a wet weight of 560kg. The Harley Davidson Tri Glide Ultra has a 22.7-liter fuel capacity and an oil capacity of 4.7 liters.


Technical specifications:

Make Model: Harley Davidson FLHTCUTG Tri Glide Ultra

Year: 2017 – 18
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in.
Bore x Stroke: 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Chrome, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt
Gear Ratio: 1st 10.534 2nd 7.302 3rd 5.423 4th 4.392 5th 3.741 6th 3.157
Frame: Mild steel, square-section backbone with twin downtubes Swingarm Mild steel, rectangular tube sections with plate junctions; MIG welded
Front Suspension: 41.3 mm telescopic, triple-circuit damping,
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Air-adjustable
Rear Wheel Travel: 76 mm / 2.9 in
Front Brakes: 2x 300mm disc, 4 piston caliper
Rear Brakes: 2x 229mm disc, 1 piston caliper
Parking Brake: Foot actuated dual parking brake
Front Wheel: Black, 7-spoke cast aluminium
Rear Wheels: Black, 7-spoke cast aluminium
Front Tyre: MT90B16 72H
Rear Tyre: 2x P205/65R15
Rake: 26 degrees
Trail: 100 mm / 3.94 in
Dimensions: Length 2670 mm / 105.1 in
Wheelbase: 1670 mm / 65.8 in
Ground Clearance: 115 mm / 4.5 in
Seat Height: Unladen 735 mm / 28.3 in Laden 688 mm / 27.1 in
Dry Weight: 545 kg / 1195 lbs
Wet Weight: 560 kg / 1230 lbs
Oil Capacity (w/filter): 4.7 Litres / US 5 qts.
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Harley Davidson Tri Glide Ultra 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Z125 Pro KRT (2017-18) https://motorcyclespecifications.com/kawasaki-z125-pro-krt-2017-18-specs/ Wed, 05 Apr 2023 08:51:59 +0000 https://motorcyclespecifications.com/?p=45453 The Kawasaki Z125 Pro KRT is a motorcycle released in 2017-18 with a four stroke, single cylinder, SOHC, 2 valve engine with a capacity of 125cc/7.6 cu in. It has

The post Kawasaki Z125 Pro KRT (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Z125 Pro KRT is a motorcycle released in 2017-18 with a four stroke, single cylinder, SOHC, 2 valve engine with a capacity of 125cc/7.6 cu in. It has a compression ratio of 9.8:1 and is air cooled, with a DFI (R) induction system featuring a 24mm throttle body. Ignition is via TCBI with electronic advance, with electric starting. The motorcycle has a 4-speed, return shift transmission and a sealed chain final drive. Suspension is handled by a 30mm inverted telescopic fork at the front and a swingarm, single shock at the rear, with 99mm front and 104mm rear wheel travel. Brakes consist of a single 200mm petal-style disc at the front and a single 184mm petal-style disc at the rear, with a rake of 26 degrees and trail of 68.5mm/2.7in. Dimensions for the bike are 1699.2mm/66.9in length, 749.3mm/29.5in width, and 1005.8mm/39.6in height, with a wheelbase of 1176.0mm/46.3in and a seat height of 749.3mm/29.5in. Wet weight is 102kg/224.8lbs with a fuel capacity of 7.5 liters/2.0 US gal.


Technical specifications:

Make Model: Kawasaki Z125 Pro KRT

Year: 2017 – 18
Engine: Four stroke, single cylinder, SOHC, 2 valve.
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 56.0 x 50.6mm
Compression Ratio: 9.8:1
Cooling System: Air cooled
Induction: DFI (R) with 24mm throttle body
Ignition: TCBI with electronic advance
Starting: Electric
Max Power: NA
Max Torque: NA
Transmission: 4 Speed, return shift
Final Drive: Sealed chain
Front Suspension: 30mm Inverted telescopic fork
Front Wheel Travel: 99 mm / 3.9 in
Rear Suspension: Swingarm, single shock
Rear Wheel Travel: 104 mm / 4.1 in
Front Brakes: Single 200mm petal-style disc
Rear Brakes: Single 184mm petal-style disc
Front Tyre: 100/90-12
Rear Tyre: 120/70-12
Rake: 26 degrees
Trail: 68.5 mm / 2.7 in.
Dimensions: Length 1699.2 mm / 66.9 in Width 749.3 mm / 29.5 in. Height 1005.8 mm / 39.6 in
Wheelbase: 1176.0 mm / 46.3 in.
Seat Height: 749.3 mm / 29.5 in.
Wet Weight: 102 kg / 224.8 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal

The post Kawasaki Z125 Pro KRT (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Aprilia Tuono 125 2017 (2017-18) https://motorcyclespecifications.com/aprilia-tuono-125-2017-2017-18-specs/ Wed, 05 Apr 2023 07:23:07 +0000 https://motorcyclespecifications.com/?p=45368 The Aprilia Tuono 125 2017-18 is a motorcycle with a four-stroke, single-cylinder, DOHC, 4 valves engine with a capacity of 124.8 cc/ 7.6 cu in. Its compression ratio is 12.5+/-0.5:1

The post Aprilia Tuono 125 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Aprilia Tuono 125 2017-18 is a motorcycle with a four-stroke, single-cylinder, DOHC, 4 valves engine with a capacity of 124.8 cc/ 7.6 cu in. Its compression ratio is 12.5+/-0.5:1 and it uses a Magneti Marelli M3G ~A, 32mm ECU induction system. The ignition is electronic with a CDI capacity discharge and it makes use of a wet sump lubrication system. The motorcycle has a 6-speed transmission and a chain final drive with a 60/13 (4.61) gear ratio. The primary drive ratio is 69/29 (2.38). The motorcycle is equipped with a front suspension consisting of a 40mm upside-down hydraulic action telescopic fork, while the rear suspension is a cast aluminum swing-arm with asymmetrical members and thin-walled structural shell. The hydraulic monoshock comes with adjustable spring preload. The front brake has a single 320mm disc and a 4-piston caliper, while the rear brake has a single 220mm disc and a 2-piston caliper. The motorcycle has a seat height of 805 mm/31.7 in, dry weight of 122 kg/269 lbs, and fuel capacity of 14 litres/3.7 US gal. The bike has a maximum power of 11.7 kW/16 hp at 10,500 rpm, and a maximum torque of 11 Nm/1.12 kgf-m/8.1 ft/lb at 8,500 rpm. The front and rear tires are 110/70-17 and 150/60-17, respectively.


Technical specifications:

Make Model: Aprilia Touno 125

Year: 2017 – 18
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 124.8 cc / 7.6 cu in
Bore x Stroke: 58 X 47 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5 +/- 0.5:1
Lubrication: Wet sump
Induction: Magneti Marelli M3G ~A , 32mm ECU
Ignition: Electronic with CDI capacity discharge
Alternator: 13V 235W
Starting: Electric
Max Power: 11.7 kW / 16 hp @ 10500 rpm
Max Torque: 11 Nm / 1.12 kgf-m / 8.1 ft/lb @ 8500 rpm
Clutch: Multiple discs, in oil bath
Transmission: 6 Speed
Final Drive: Chain: 60/13 (4.61)
Gear Ratio: 1st 11/33 (0.33) 2nd 15/30 (0.50) 3rd 18/27 (0.67) 4th 20/24 (0.83) 5th 25/27 (0.92) 6th 23/22 (1.05)
Primary Drive: 69/29 (2.38)
Frame: Aluminum perimeter frame
Front Suspension: ~A40 mm Upside-down hydraulic action telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Cast Aluminium swing-arm with asymmetrical members and thin walled structural shell. Hydraulic monoshock with adjustable spring preload
Rear Wheel travel: 120 mm / 4.7 in
Front Brakes: Single ~A320 mm disc, 4 piston caliper
Rear Brakes: Single ~A220 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Seat height: 805 mm / 31.7 in
Dry Weight: 122 kg / 269 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Aprilia Tuono 125 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Yamaha T-MAX (2017-18) https://motorcyclespecifications.com/yamaha-t-max-2017-18-specs/ Wed, 05 Apr 2023 00:14:54 +0000 https://motorcyclespecifications.com/?p=44972 The Yamaha TMAX 530 motorcycle was produced from 2017-18 and has a four stroke, parallel twin cylinder, DOHC engine with a capacity of 530 cc. It has a liquid cooling

The post Yamaha T-MAX (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Yamaha TMAX 530 motorcycle was produced from 2017-18 and has a four stroke, parallel twin cylinder, DOHC engine with a capacity of 530 cc. It has a liquid cooling system and a semi-dry-sump lubrication. The bike also has electronic fuel injection and a wet, multiple-disc automatic clutch. It has a fully automatic CVT transmission and a V-belt final drive. The front suspension is 43mm telescopic forks and the rear suspension is a swingarm with a single shock. The front brakes are two 267 discs and the rear brakes are a single 267 disc. The bike has a length of 2200mm, a width of 765mm, and a height of 1420 or 1555mm depending on the model. The wheelbase is 1575mm and the seat height is 800mm. It has a ground clearance of 125mm and a wet weight of 213kg. The fuel capacity is 15 liters.


Technical specifications:

Make Model: Yamaha TMAX 530

Year: 2017 – 18
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder.
Capacity: 530 cc / 32.34 cu-in
Bore x Stroke: 68.0 x 73.0 mm
Cooling System: Liquid cooled
Compression Ratio: 10:9: 1
Lubrication: Semi-dry-sump
Induction: Injection. Electronic fuel injection
Ignition: TCI
Starting: Electric
Max Power: 45.3 hp / 33.8 kW @ 6750 rpm
Max Torque: 52.3 Nm / 38.6 ft.lbs @ 5250 rpm
Clutch: Wet, multiple-disc automatic
Transmission: Fully automatic CVT
Final Drive: V-Belt
Front Suspension: 43mm Telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swingarm – single shock
Rear Wheel Travel: 116 mm / 4.6 in
Front Brakes: 2x 267 discs
Rear Brakes: Single 267 disc
Front Tyre: 120/70-15
Rear Tyre: 160/60-15
Dimensions: Length 2200mm / 86.6 in Width 765mm / 30.1 in Height 1420 or 1555mm / 55.9 or 61.2 in
Wheelbase: 1575 mm / 62.0 in
Seat Height: 800 mm / 31.5 in
Ground Clearance: 125mm / 4.9 in
Wet Weight: 213 kg / 469.5 lbs
Fuel Capacity: 15 Litters / 4 gal

The post Yamaha T-MAX (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
KTM 390 Duke (2017-18) https://motorcyclespecifications.com/ktm-390-duke-2017-18-specs/ Tue, 04 Apr 2023 21:50:06 +0000 https://motorcyclespecifications.com/?p=44842 The KTM 390 Duke is a motorcycle that has been in production from 2017-18. Its engine is a four-stroke, single cylinder, with a capacity of 373cc. It has a liquid

The post KTM 390 Duke (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 390 Duke is a motorcycle that has been in production from 2017-18. Its engine is a four-stroke, single cylinder, with a capacity of 373cc. It has a liquid cooling system and runs on Bosch injection. The bike features a steel trellis frame, powder-coated for durability, and has a front suspension of a WP inverted fork with 43mm, while the rear suspension is a WP monoshock. The front brake consists of a single 320mm disc with a 4 piston radial caliper, and the rear brake is a single 230mm disc with 1 piston caliper. This bike has a maximum power of 43.5hp/32kW at 9500rpm and a maximum torque of 3.6kg-m/35.3Nm at 7000rpm. The KTM 390 Duke has a clutch of a PASC c antihopping clutch, mechanically operated, and a transmission of 6 speed. It also has a Bosch EMS ignition and a starting system that is electric. Additionally, this bike has a Bosch 9MB two-channel ABS and 13.4L/3.5 US gal/2.9 Imp gal fuel capacity. Its dry weight is 149kg/328lbs. The bike’s measurements are as follows: front tire 110/70 -17, rear tire 150/60-17; steering head angle 66 degrees; seat height 830mm/32.7in; wheelbase 1357mm/53.4in; ground clearance 185mm/7.3in. Overall, the KTM 390 Duke is a powerful high-performing motorcycle perfect for people who enjoy a thrilling and smooth ride.


Technical specifications:

Make Model: KTM 390 Duke

Year: 2017 – 18
Engine: Four stroke, single cylinder. DOHC with finger followers, 4 valves
Capacity: 373 cc / 22.7 cu-in
Bore x Stroke: 89 x 60 mm
Cooling System: Liquid Cooled
Compression Ratio: 12.6:1
Induction: Bosch Injection
Lubrication: Wet sump
Ignition: Bosch EMS
Starting: Electric
Max Power: 43.5 hp / 32 kW @ 9500 rpm
Max Torque: 3.6 kg-m / 35.3 Nm @7000rpm
Clutch: PASC c antihopping clutch, mechanically operated
Transmission: 6 Speed
Primary Drive Ratio: 30:80
Final Drive Ratio: 15:45
Final Drive: Chain 5/8 x 1/4″ X Ring
Frame: Steel trellis frame, powder coated
Front Suspension: WP inverted fork 43 mm
Front Wheel Travel: 142 mm / 5.6 in
Rear Suspension: WP monoshock
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: Single 320 mm disc, 4 piston radial caliper
Rear Brakes: Single 230 mm disc 1 piston caliper
ABS: Bosch 9MB two-channel ABS
Front Tyre: 110/70 -17
Rear Tyre: 150/60-17
Steering Head Angle: 66 degrees
Seat Height: 830 mm / 32.7 in
Wheelbase: 1357 mm / 53.4 in
Ground Clearance: 185 mm / 7.3 in
Dry Weight: 149 kg / 328 lbs
Fuel Capacity: 13.4 L / 3.5 US gal / 2.9 Imp gal

The post KTM 390 Duke (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHTCU Ultra Classic Electra Glide 2017 (2017-18) https://motorcyclespecifications.com/harley-davidson-flhtcu-ultra-classic-electra-glide-2017-2017-18-specs/ Tue, 04 Apr 2023 20:10:56 +0000 https://motorcyclespecifications.com/?p=44752 The Harley Davidson FLHTCU Electra Glide Ultra is a motorcycle model from 2017-18, equipped with a four-stroke, V-twin engine with a capacity of 1746cc and 4 valves per cylinder. It

The post Harley Davidson FLHTCU Ultra Classic Electra Glide 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHTCU Electra Glide Ultra is a motorcycle model from 2017-18, equipped with a four-stroke, V-twin engine with a capacity of 1746cc and 4 valves per cylinder. It features electronic sequential port fuel injection, pressurized and dry-sump lubrication system and an ignition system with map-controlled spark, among other specs. The bike’s clutch is multi-plate, wet and it has a 6-speed transmission system with a final drive on a belt. The front suspension consists of a 41.3mm telescopic, cartridge-style damping system while the rear suspension has a short, air-adjustable shock. It has front and rear disc brakes with 4 piston caliper and impeller-cast aluminium wheels. The Harley Davidson FLHTCU Ultra Classic Electra Glide also features a mild steel frame with a square-section backbone, twin downtubes, and a lean angle of 31.8° on the left and 31.9° on the right. The bike has a length of 2593 mm, a wheelbase of 1625 mm, a ground clearance of 139 mm, and a seat height of 740 mm when unladen and 696 mm when laden.


Technical specifications:

Make Model: Harley Davidson FLHTCU Electra Glide Ultra

Year: 2017 – 18
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in.
Bore x Stroke: 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Chrome, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Frame: Mild steel, square-section backbone with twin downtubes
Lean Angle, Left: 31.8o
Lean Angle, Right: 31.9
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Short, air-adjustable shock
Front Brakes: 2 x 292 mm disc, 4 piston caliper
Rear Brakes: Single 292 mm disc, 4 piston caliper
Wheels, Front and Rear: Impeller, cast aluminium
Front Tyre: 130/80B17 65H
Rear Tyre: 180/65B16 81H
Rake: 26 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2593 mm / 102.1 in
Wheelbase: 1625 mm / 64 in
Ground Clearance: 139 mm / 5.5 in
Seat Height: Unladen 740 mm / 29.1 in Laden 696 mm / 27.4 in

The post Harley Davidson FLHTCU Ultra Classic Electra Glide 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Scrambler (2017-18) https://motorcyclespecifications.com/triumph-scrambler-2017-18-specs/ Tue, 04 Apr 2023 19:11:10 +0000 https://motorcyclespecifications.com/?p=44695 The 2017-18 Triumph Scrambler is a motorcycle with a four-stroke, parallel-twin engine with a capacity of 865cc. It has a bore and stroke measurement of 90 x 68mm and is

The post Triumph Scrambler (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The 2017-18 Triumph Scrambler is a motorcycle with a four-stroke, parallel-twin engine with a capacity of 865cc. It has a bore and stroke measurement of 90 x 68mm and is air-cooled with a compression ratio of 9.2:1. The bike is equipped with high-level stainless steel headers with twin chromed silencers and a multipoint sequential electronic fuel injection with SAI induction. The ignition is digital inductive type and the bike has an electric starting system. The Scrambler has a maximum power of 44.1kW/59hp at 6800rpm and a maximum torque of 69Nm 7.04 kgf-m / 51 ft-lb at 4750rpm. It has a wet, multi-plate clutch and a 5-speed transmission with a final drive of an X-ring chain. The frame is a tubular steel cradle, and the front suspension has 41mm telescopic forks with a front wheel travel of 120mm/4.7in. The rear suspension is chromed spring twin shocks with adjustable preload with a rear wheel travel of 106mm/4.2in. The front brakes are a single 310mm disc, Nissen 2 piston floating caliper, while the rear brakes are a single 255mm disc, Nissen 2 piston floating caliper. The bike has a 36-spoke 19 x 2.5 in front wheel and 40-spoke 17 x 3.5 in rear wheel. The bike has a length of 2213mm/87.1in, a width of 860mm/33.8in (handlebars), and a height without mirrors of 1202mm/47.3in. It has a wheelbase of 1500mm/59.0in, a seat height of 825mm/32.5in, and a dry weight of 230kg/506lbs. The fuel capacity is 16.6 litres/4.4 US gal/3.7 Imp gal, and the average consumption at 90 km/h/56 mph is 3.9 L/100 km/25.5 km/L/60 US mpg/72.4 Imp mpg. Its standing 1/4 mile is 14.7 sec, and the bike has a top speed of 169.4 km/h/105.3 mph.


Technical specifications:

Make Model: Triumph Scrambler

Year: 2017 – 18
Engine: Four stroke, parallel-twin, DOHC
Capacity: 865 cc / 52.8 cu in
Bore x Stroke: 90 x 68 mm
Cooling System: Air-cooled
Compression Ratio: 9.2:1
Oil Capacity: 4.5 Litres / 1.2 US gal / 1.0 Imp gal
Exhaust: High level stainless steel headers with twin chromed silencers
Lubrication: Wet sump
Induction: Multipoint sequential electronic fuel injection with SAI
Ignition: Digital inductive type
Starting: Electric
Max Power: 44.1 kW / 59 hp @ 6800 rpm
Max Torque: 69 Nm 7.04 kgf-m / 51 ft-lb @ 4750 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed
Final Drive: X-ring chain
Frame: Tubular steel cradle
Front Suspension: 41mm Telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Chromed spring twin shocks with adjustable preload
Rear Wheel Travel: 106 mm / 4.2 in
Front Brakes: Single 310 mm disc, Nissen 2 piston floating caliper
Rear Brakes: Single 255 mm disc, Nissen 2 piston floating caliper
Wheel Front: 36-spoke 19 x 2.5 in
Wheel Rear: 40-spoke 17 x 3.5 in
Front Tyre: 100/90 -19
Rear Tyre: 130/80 -17
Rake: 27.8 o
Trail: 105mm / 4.1 in
Dimensions: Length 2213 mm / 87.1in Width (handlebars) 860 mm / 33.8in Height without mirrors 1202 mm / 47.3in
Wheelbase: 1500mm / 59.0in
Seat Height: 825 mm / 32.5in
Dry Weight: 230 kg / 506 lbs
Fuel Capacity: 16.6 Litres / 4.4 US gal / 3.7 Imp gal
Consumption Average: @ 90 km/h / 56 mph: 3.9 L/100 km / 25.5 km/l / 60 US mpg / 72.4 Imp mpg
Standing 1/4 Mile: 14.7 sec
Top Speed: 169.4 km/h / 105.3 mph

The post Triumph Scrambler (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
KTM 500 EXC-F (2017-18) https://motorcyclespecifications.com/ktm-500-exc-f-2017-18-specs/ Tue, 04 Apr 2023 18:32:59 +0000 https://motorcyclespecifications.com/?p=44662 The KTM 500 EXC-F motorcycle was produced from 2017-18, equipped with a liquid-cooled, four-stroke single-cylinder SOHC engine with a capacity of 510.4cc and a compression ratio of 11.9:1. It features

The post KTM 500 EXC-F (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 500 EXC-F motorcycle was produced from 2017-18, equipped with a liquid-cooled, four-stroke single-cylinder SOHC engine with a capacity of 510.4cc and a compression ratio of 11.9:1. It features a Keihin MX FCR 39 induction system, contactless controlled fully electronic ignition with digital ignition adjustment, and an electric starter. The clutch is a multidisc in oil bath, hydraulically activated, and the bike has a six-speed transmission with a final chain drive. The frame is a central double-cradle type 25CrMo4, and it has a WP Performance Systems MXMA 4860 upside-down front suspension and a WP Performance Systems 4618 PDS DCC rear suspension. Braking is handled by a single 260mm disc in the front and a single 220mm disc in the rear, with a front tyre size of 90/90-21 and a rear tyre size of 120/90-18. The bike has a wheelbase of 1482 +/- 10mm, a seat height of 960mm, and a ground clearance of 355mm. It has a wet weight of 106.5kg and a fuel capacity of 8.5 litres.


Technical specifications:

Make Model: KTM 500 EXC-F

Year: 2017 – 18
Engine: Four stroke, single cylinder, SOHC, 4 valves per cylinder
Capacity: 510.4 cc / 31.1 cu-in
Bore x Stroke: 95 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.9:1
Induction: Keihin MX FCR 39
Ignition: Contactless controlled fully electronic ignition with digital ignition adjustment, type Kokusan
Starting: Electric
Clutch: Multidisc clutch in oil bath, hydraulically activated
Transmission: 6 Speed
Final Drive: Chain 5/8 x 1/4″
Primary Drive Ratio: 32:76
Gear Ratios: 1st 14:36 / 2nd 17:32 / 3rd 19:28 / 4th 22:26 / 5th 23:24 / 6th 26:21
Final Drive Ratio: 13:50
Frame: Central double-cradle type 25CrMo4
Front Suspension: WP Performance Systems MXMA 4860 upside down
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: WP Performance Systems 4618 PDS DCC
Rear Wheel Travel: 310 mm / 12.2 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Tyre: 90/90 – 21
Rear Tyre: 120/90 – 18
Steering Head Angle: 63.5
Wheelbase: 1482 +/- 10 mm
Seat Height: 960 mm . 37.7 in
Ground Clearance: 355 mm / 13.9 in
Wet Weight: 106.5 kg / 234.7 lbs
Fuel Capacity: 8.5 Litres / 2.2 US gal / 1,9 Imp gal

The post KTM 500 EXC-F (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Daytona 675R (2017-18) https://motorcyclespecifications.com/triumph-daytona-675r-2017-18-specs/ Tue, 04 Apr 2023 16:55:07 +0000 https://motorcyclespecifications.com/?p=44570 The Triumph Daytona 675R (2017-18) motorcycle is powered by a four-stroke, in-line 3-cylinder DOHC engine with a capacity of 675 cc. The liquid-cooled engine has a compression ratio of 13.1:1

The post Triumph Daytona 675R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Daytona 675R (2017-18) motorcycle is powered by a four-stroke, in-line 3-cylinder DOHC engine with a capacity of 675 cc. The liquid-cooled engine has a compression ratio of 13.1:1 and a wet sump lubrication system. The multipoint sequential electronic fuel injection with forced air induction and SAI allows for smooth and efficient fuel consumption. The stainless steel 3 into 1 exhaust system with valve in secondary and under engine silencer further adds to its performance. The clutch is a wet, multi-plate, slipper type with a 6-speed transmission and final drive is through an O-ring chain. The frame is an aluminum beam twin spar and the suspension includes ~Ahlins 43mm upside down NIX30 forks at the front and a ~Ahlins TTX36 twin-tube monoshock with piggyback reservoir at the rear. The front and rear brakes are Brembo with switchable ABS, and the wheels are cast aluminium alloy with 5 spokes. The Rake and Trail are 23.0 o and 87.9 mm / 3.5 in, respectively. The motorcycle measures 2045 mm / 80.4 in in length, 695 mm / 27.3 in in width (handlebars), and 1112 mm / 43.7 in in height without mirrors. The wheelbase is 1375 mm / 54.1 in, the seat height is 830 mm / 32.7 in and the dry weight is 167 kg / 368lbs. The fuel tank has a capacity of 17.5 Liters / 4.6 US gal / 3.8 Imp gal and the motorcycle has an average consumption of 4.5 L/100 km / 22.3 km/l / 52.4 US mpg / 62.8 Imp mpg.


Technical specifications:

Make Model: Triumph Daytona 675R

Year: 2017 – 18
Engine: Four stroke, in-line 3-cylinder, DOHC, 4 valve per cylinder.
Capacity: 675 cc / 41.2 cu in
Bore x Stroke: 76 x 49.6 mm
Cooling System: Liquid-cooled
Compression Ratio: 13.1:1
Lubrication: Wet sump
Oil Capacity: 3.6 Litres / 1.0 US gal / 0.8 Imp gal
Induction: Multipoint sequential electronic fuel injection with forced air induction and SAI
Exhaust: Stainless steel 3 into 1 system with valve in secondary and under engine silencer
Ignition: Digital – inductive type
Starting: Electric
Max Power: 95.4 kW / 128 hp @ 12500rpm
Max Torque: 74 Nm / 7.5 kgf-m / 55 ft.lbs @ 11900rpm
Clutch: Wet, multi-plate, slipper.
Transmission: 6 Speed
Final Drive: O-ring chain
Frame: Aluminium beam twin spar. Rear – 2 piece high pressure die cast swingarm braced, twin-sided, aluminium alloy with adjustable pivot position
Front Suspension: ~Ahlins 43mm upside down NIX30 forks with adjustable preload, rebound and compression damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: ~Ahlins TTX36 twin tube monoshock with piggy back reservoir, adjustable preload, rebound and compression damping
Rear Wheel Travel: 133 mm / 5.2 in
Front Wheel: Front Cast aluminium alloy 5-spoke 17 x 3.5in
Rear Wheel: Rear Cast aluminium alloy 5-spoke 17 x 5.5in
Front Brakes: 2 x 308 mm Discs, 4 piston calipers, Brembo, switchable ABS
Rear Brakes: Single 220 mm disc, 1 piston caliper, Brembo, swotchable ABS
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Rake: 23.0 o
Trail: 87.9 mm / 3.5 in
Dimensions: Length 2045 mm / 80.4 in Width (handlebars) 695 mm / 27.3 in Height without mirrors 1112 mm / 43.7 in
Wheelbase: 1375 mm / 54.1 in
Seat Height: 830 mm / 32.7 in
Dry Weight: 167 kg / 368lbs
Wet Weight: 184 kg / 406 lbs
Fuel Capacity: 17.5 Litres / 4.6 US gal / 3.8 Imp gal
Consumption Average: 4.5 L/100 km / 22.3 km/l / 52.4 US mpg / 62.8 Imp mpg

The post Triumph Daytona 675R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph America (2017-18) https://motorcyclespecifications.com/triumph-america-2017-18-specs/ Tue, 04 Apr 2023 16:49:19 +0000 https://motorcyclespecifications.com/?p=44564 The Triumph America motorcycle is available from 2017-18 and features a four stroke, parallel twin cylinder engine with a capacity of 865cc. It has a bore x stroke of 90

The post Triumph America (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph America motorcycle is available from 2017-18 and features a four stroke, parallel twin cylinder engine with a capacity of 865cc. It has a bore x stroke of 90 x 68 mm, an air-cooled cooling system and a compression ratio of 9.2:1. Induction is achieved through multipoint sequential fuel injection with SAI, while lubrication is achieved via a wet sump with synthetic 15W/50 oil. The bike has a maximum power of 45.5 kW and maximum torque of 72 Nm, and features a wet multi plate clutch and 5-speed transmission. The final drive is a chain, X-ring system. The frame is made of tubular steel with a twin-sided, tubular steel swing arm. The front suspension is a 41mm Kayaba telescopic fork with polished stainless-steel shrouds, while the rear features Kayaba chrome spring twin shocks with adjustable preload. The front brake is a single 310mm disc with a Nissin 2 piston floating caliper, while the rear is a single 285mm disc with a Nissin 2 piston floating caliper. The bike has cast aluminum alloy wheels with 12 spokes, and the front wheel is 16 x 3.0 inches while the rear is 15 x 4.0 inches. The front tire is 130/90-16 and the rear is 170/80 B15. The rake is 33.3 degrees, and the trail is 143mm. The bike has a length of 2387mm, a width at handlebars of 920mm, and a height without mirrors of 1175mm. The wheelbase is 1610mm and the seat height is 690mm. The dry weight is 231kg while the wet weight is 250kg. The fuel capacity is 19.3 liters.


Technical specifications:

Make Model: Triumph America

Year: 2017 – 18
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder, 360 degrees firing interval
Capacity: 865 cc / 52.8 cub in.
Bore x Stroke: 90 x 68 mm
Cooling System: Air-cooled
Compression Ratio: 9.2:1
Induction: Multipoint Sequential Fuel injection with SAI
Lubrication: Wet sump
Engine Oil: Synthetic, 15W/50
Oil Capacity: 4.5 L / 1.2 US gal / 1.0 Imp gal
Exhaust: Stainless steel twin-walled headers, twin chromed silencers
Induction: Twin carburettors, with throttle position sensor and electric carburettor heaters
Ignition: Digital
Starting: Electric
Max Power: 45.5 kW / 61 hp @ 6800 rpm
Max Torque: 72 Nm / 7.34 kgf-m / 53.1 ft-lb @ 3300 rpm
Clutch: Wet multi plate
Transmission: 5 Speed
Final Drive: Chain, X-ring
Frame: Tubular steel cradle, swing arm: twin-sided, tubular steel
Front Suspension: 41mm Kayaba telescopic forks, polished stainless steel shrouds
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Kayaba chrome spring twin shocks with adjustable preload
Rear Wheel Travel: 96 mm / 3.8 in
Front Brakes: Single 310 mm disc, Nissin 2 piston floating caliper
Rear Brakes: Single 285 mm disc, Nissin 2 piston floating caliper
Wheels Front: Cast aluminum alloy, 12 spoke, 16 x 3.0 inch
Wheels Rear: Cast aluminum alloy, 12 spoke, 15 x 4.0 inch
Front Tyre: 130/90 – 16
Rear Tyre: 170/80 B15
Rake: 33.3 degrees
Trail: 143 mm / 5.6 in
Dimensions: Length 2387 mm / 94.0 in Width 920 mm / 36.2 in (at handlebars) Height 1175 mm / 46.3 in (without mirrors)
Wheelbase: 1610 mm / 63.4 in
Seat Height: 690 mm / 27.2 in
Dry Weight: 231 kg / 509 lbs
Wet Weight: 250 kg / 551 lbs
Fuel Capacity: 19.3 Litres / 5.1 US gal / 4.2 Imp gal

The post Triumph America (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Supersport (2017-18) https://motorcyclespecifications.com/ducati-supersport-2017-18-specs/ Tue, 04 Apr 2023 12:11:04 +0000 https://motorcyclespecifications.com/?p=44307 The Ducati Supersport is a motorcycle model from 2017-18 with a 937cc engine and a bore and stroke of 94 x 67.5 mm. It has a liquid cooling system and

The post Ducati Supersport (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Supersport is a motorcycle model from 2017-18 with a 937cc engine and a bore and stroke of 94 x 67.5 mm. It has a liquid cooling system and an electronic fuel injection system with a maximum power of 82 kW/110 hp at 9000 RPM and maximum torque of 96.7 Nm at 6500 RPM. The clutch is wet multiplate and self-servo-operated with a final drive of a chain. The frame is a tubular steel trellis frame attached to the cylinder head with fully adjustable front suspension and progressive linkage with adjustable SACHS monoshock rear suspension. The front brakes feature 2 x 320mm semi-floating discs with radially mounted Monobloc Brembo M4-32 calipers, while the rear brakes have a 245mm disc with 2-piston calipers and Bosch ABS. The wheels are Y-shaped and three-spoke in light alloy, with Pirelli Diablo Rosso III tires. The bike has a rake of 240 and a trail of 91mm, with a wheelbase of 1478mm and a seat height of 810mm. The dry weight is 183 kg, and the fuel capacity is 16 liters with a full LCD display, adjustable windscreen, and day-time running light. The bike is also ready for the Ducati Quick Shift (DQS) up/down and anti-theft system.


Technical specifications:

Make Model: Ducati Supersport

Year: 2017 – 18
Engine: Testastretta 11 degrees, L-Twin cylinder, 4 valve per cylinder, Desmodromic
Capacity: 937 cc / 57.2 cu in
Bore x Stroke: 94 x 67.5 mm
Compression Ratio: 12.6:1
Cooling System: Liquid cooled
Induction: Electronic fuel injection system, 53 mm throttle bodies with full Ride-by-Wire
Ignition: Electronic
Starting: Electric
Exhaust: Lightweight 2-1-2 system with catalytic converter and two lambda probes. Twin aluminium mufflers
Emissions: Euro 4
Max Power: 82 kW / 110 hp @ 9000 rpm
Max Torque: 96.7 Nm / 9.9 kgf-m / 71.3 ft-lb @ 6500 rpm
Clutch: Wet multiplate clutch mechanically operated, self-servo action on drive, slipper action on over-run
Transmission: 6-Speed
Final Drive: Chain; front sprocket 15; rear sprocket 43
Gear Ratio: 1st 37/15, 2nd 30/17, 3rd 28/20, 4th 26/22, 5th 24/23, 6th 23/24
Primary drive: Straight cut gears; ratio 1.84:1
Frame: Tubular steel Trellis frame attached to the cylinder head
Front Suspension: Fully adjustable 48 mm usd Marzocchi fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Progressive linkage with adjustable sACHS monoshock. Aluminium single-sided swingarm
Rear Wheel travel: 144 mm / 5.7 in
Front Brakes: 2 x 320 mm Semi-floating discs, radially mounted Monobloc Brembo M4-32 callipers, 4-piston, radial pump with Bosch ABS
Rear Brakes: 245 mm disc, 2-piston caliper, Bosch ABS
Front Wheel: Y shaped, 3-spoke in light alloy, 3.50″ x 17″
Rear Wheel: Y shaped, 3-spoke in light alloy, 5.50″ x 17″
Front Tyre: Pirelli Diablo Rosso III 120/70 ZR17
Rear Tyre: Pirelli Diablo Rosso III 180/55 ZR17
Rake: 240
Trail: 91 mm / 3.6 in
Wheelbase: 1478 mm / 58.3 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 183 kg / 403 lbs
Wet Weight: 210 kg / 463lbs
Fuel Capacity: 16 L / 4.2 US gal / 3.5 Imp gal
Instrumentation: Riding Modes, Power Modes, Ducati Safety Pack (Bosch ABS + DTC), RbW, Full-LCD display, Day Time Running Light (DRL), Adjustable windscreen, Ready for Ducati Quick Shift (DQS) up/down and anti-theft system

The post Ducati Supersport (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Bonneville T120 Bobber 1200 (2017-18) https://motorcyclespecifications.com/triumph-bonneville-t120-bobber-1200-2017-18-specs/ Tue, 04 Apr 2023 11:39:07 +0000 https://motorcyclespecifications.com/?p=44277 The Triumph Bonneville Bobber is a motorcycle model produced between 2017 and 2018, featuring a four-stroke, parallel twin engine with a capacity of 1198cc. The engine has a compression ratio

The post Triumph Bonneville T120 Bobber 1200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Bonneville Bobber is a motorcycle model produced between 2017 and 2018, featuring a four-stroke, parallel twin engine with a capacity of 1198cc. The engine has a compression ratio of 10.0:1 and is liquid-cooled, with lubrication provided through a wet sump system. The bike features straight line stainless steel twin-skin slash cut twin stubby silencers, and the fuel is delivered through multipoint sequential electronic fuel injection. The bike is started electrically and reaches a maximum power of 57.4 kW or 77 hp at 6550 rpm, with a maximum torque of 105 Nm or 77.4 ft-lbs at 3100 rpm. The transmission is a 6-speed manual with a wet, multi-plate clutch and a final drive is via a chain with an X-ring. The frame is a dual tubular steel cradle, with Kayaba 41 mm forks and a Kayaba twin shocks with adjustable preload providing suspension. Braking is provided through a single 310 mm disc with 2 piston floating Nissen calipers with ABS on the front and a single 255 mm disc with 2 piston floating Nissen caliper with ABS on the rear. The wheels are wire 32-spoke steel rims with the front tire being 100/90-19 and the rear tire being 150/80-16. The bike’s dimensions include a length of 2235 mm, a width of 800 mm, and a height of 1025 mm. The wheelbase is 1510 mm and the seat height is 690 mm solo. The dry weight of the bike is 228.0 kg or 502.7 lbs, and the fuel capacity is 10.6 liters or 2.8 US gallons or 3.2 imperial gallons.


Technical specifications:

Make Model: Triumph Bonneville Bobber

Year: 2017 – 18
Engine: Four stoke, parallel twin, 270o crank, SOHC
Capacity: 1198 cc / 73.1 cu in
Bore x Stroke: 97.6 x 80 mm
Compression Ratio: 10.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Exhaust: Straight line stainless steel twin-skin slash cut twin stubby silencers
Induction: Multipoint sequential electronic fuel injection
Ignition: Digital
Starting: Electric
Max Power: 57.4 kW / 77 hp @ 6550 rpm
Max Torque: 105 Nm / 10.7 kgf-m / 77.4 ft-lbs @ 3100 rpm
Clutch: Wet, multi-plate
Transmission: 6-Speed
Final Drive: Chain, X-ring
Frame: Dual tubular steel cradle
Front Suspension: Kayaba 41 mm forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Kayaba twin shocks with adjustable preload
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 310 mm disc, 2 piston floating Nissen calipers, ABS
Rear Brakes: Single 255 mm disc, 2 piston floating Nissen caliper, ABS
Wheels: Wire 32-spoke, steel rims
Front Tyre: 100/90-19
Rear Tyre: 150/80-16
Rake: 25.8 o
Trail: 87.0 mm / 3.4 in
Dimensions: Length 2235 mm / 87.9 in Width 800 mm / 31.5 in Height 1025 mm / 40.4 in
Wheelbase: 1510 mm / 59.4 in
Seat Height Solo: 690 mm / 27.2 in
Dry Weight: 228.0 kg / 502.7 lbs
Fuel Capacity: 10.6 Litres / 2.8 US gal / 3.2 Imp gal

The post Triumph Bonneville T120 Bobber 1200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
KTM RC200 (2017-18) https://motorcyclespecifications.com/ktm-rc200-2017-18-specs/ Tue, 04 Apr 2023 08:08:52 +0000 https://motorcyclespecifications.com/?p=44082 I’m sorry, but I cannot provide a summary without the content to refer to. Please provide the content for me to summarize. Technical specifications: Continue reading

The post KTM RC200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
I’m sorry, but I cannot provide a summary without the content to refer to. Please provide the content for me to summarize.


Technical specifications:

Continue reading

The post KTM RC200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Monster 1200 (2017-18) https://motorcyclespecifications.com/ducati-monster-1200-2017-18-specs/ Tue, 04 Apr 2023 07:03:01 +0000 https://motorcyclespecifications.com/?p=44023 The Ducati Monster 1200 is a four-stroke motorcycle with a Testastretta L-Twin engine and a capacity of 1198cc. The bike has liquid cooling, an electronic fuel injection system, and a

The post Ducati Monster 1200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Monster 1200 is a four-stroke motorcycle with a Testastretta L-Twin engine and a capacity of 1198cc. The bike has liquid cooling, an electronic fuel injection system, and a lightweight 2-1-2 exhaust system with twin aluminum mufflers. The Marelli electronic ignition system starts the engine, which can produce up to 147 horsepower at 9250 rpm and 124 Nm of torque at 7750 rpm. The motorcycle has a light action, wet, multi-plate clutch and a six-speed transmission with chain final drive. Its tubular steel Trellis frame is attached to the cylinder head and has a Kayaba fully adjustable USD fork and a Progressive linkage with Sachs fully adjustable monoshock rear suspension. The front brakes consist of two 320mm semi-floating discs with radially mounted Monobloc Brembo M50 callipers, while the rear brakes feature a single 245mm disc with 2-piston floating calliper. The front and rear wheels are made of 10-spoke light alloy and are fitted with Pirelli Diablo Rosso III tires. The bike has a wheelbase of 1485 mm, a seat height of 795-820 mm, an adjustable rake of 23.3 degrees, and a trail of 86.5 mm. The dry weight of the bike is 186.6 kg, and its wet weight is 213 kg. The bike has a fuel capacity of 16.5 liters. The Ducati Monster 1200 is a powerful and well-equipped motorcycle suitable for both casual and professional riders.


Technical specifications:

Make Model: Ducati Monster 1200

Year: 2017 – 18
Engine: Four stroke, Testastretta 11 degrees L-Twin, DOHC, 4 Desmodromically actuated valves per cylinder
Capacity: 1198 cc / 72.9 cu-in
Bore x Stroke: 106 x 67.9 mm
Cooling System: Liquid cooled
Compression Ratio: 13.0:1
Lubrication: Wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run.
Induction: Electronic fuel injection system, 56mm throttle bodies with full Ride by Wire
Exhaust: Lightweight 2-1-2 system with catalytic converter and two lambda probes. Twin aluminium mufflers
Ignition: Marelli electronic
Starting: Electric
Max Power: 108 kW / 147 hp @ 9250 rpm
Max Torque: 124 Nm / 91 lb-ft @ 7750 rpm
Clutch: Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run.
Transmission: 6 Speed
Final Drive: Chain, front sprocket 15; rear sprocket 41
Gear Ratio: 1st 37/15 2nd 30/17 3rd 27/20 4th 24/22 5th 23/24 6th 22/25
Primary Drive: Straight cut gears, ratio 1.84:1
Frame: Tubular steel Trellis frame attached to the cylinders head
Front Suspension: 43 mm Kayaba fully adjustable USD fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Progressive linkage with Sachs fully adjustable monoshock, aluminium single-sided swingarm
Rear Wheel Travel: 149 mm / 5.8 in
Front Brakes: 2 x 320 mm Semi-floating discs, radially mounted Monobloc Brembo M50 callipers, 4-pistons, radial pump with Bosch ABS as standard
Rear Brakes: Single 245mm disc, 2-piston floating calliper with Bosch ABS as standard equipment
Front Tyre: 120/70 – ZR17 Pirelli Diablo Rosso III
Rear Tyre: 190/55 – ZR17 Pirelli Diablo Rosso III
Front wheel: 10-spoke light alloy, 3.50 x 17
Rear wheel: 10-spoke light alloy, 6.00 x 17
Wheelbase: 1485 mm / 58.46 in
Rake: 23.3 degrees
Trail: 86.5 mm / 3.4 in
Seat Height: 795 mm – 820 mm / 30.0 in – 32.28 in, adjustable
Dry Weight: 186.6 kg / 412 lbs
Wet Weight: 213 kg / 470 lbs
Fuel Capacity: 16.5 Litres / 4.36 US gal

The post Ducati Monster 1200 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
MV Agusta F3 675 (2017-18) https://motorcyclespecifications.com/mv-agusta-f3-675-2017-18-specs/ Tue, 04 Apr 2023 05:53:09 +0000 https://motorcyclespecifications.com/?p=43957 The MV Agusta F3 675 is a motorcycle model released for the years of 2017 and 2018. It features a four-stroke, transverse three-cylinder engine with a capacity of 675 cc

The post MV Agusta F3 675 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The MV Agusta F3 675 is a motorcycle model released for the years of 2017 and 2018. It features a four-stroke, transverse three-cylinder engine with a capacity of 675 cc or 41.1 cubic inches. The compression ratio is 13.0:1 and it has an integrated ignition-injection system with six injectors, and engine control unit Eldor EM2.0. The throttle body is full drive-by-wire Mikuni, and the bike has torque control with four maps and traction control with eight levels of intervention. The max power of the bike is 94.2 kW or 128 hp at 14400 rpm, and the max torque is 71 Nm or 7.24 kgm at 10600 rpm. The bike has a wet, multiple discs, cable-operated clutch, with a transmission that includes six speeds and a final drive chain with a ratio of 16/43. The frame is ALS steel tubular trellis with rear swing arm pivot plates made of aluminum alloy. The bike has front suspension with a 43mm upside-telescopic hydraulic fork and a rear suspension that is progressive single shock absorber that is adjustable. The front brakes have 2x 320mm double floating discs with 4 piston calipers and the rear brakes have a single 220mm disc with single piston calipers. The wheels are made of aluminum alloy with the front wheel being 3.50 x 17 inches and the rear wheel being 5.50 x 17 inches. The motorcycle’s dimensions are length 2060 mm (81.0 in), width 725 mm (28.5 in), and saddle height 805 mm (31.6 in), and it has a fuel capacity of 16 liters or 4.2 US gallons. The bike’s top speed can reach up to 258.5 km/hr or 160.3 mph.


Technical specifications:

Make Model: MV Agusta F3 675

Year: 2017- 18
Engine: Four stroke, transverse three cylinder. DOHC, 4 Valve per cylinder,
Capacity: 675 cc / 41.1 cu-in
Bore x Stroke: 79 x 45.9 mm
Compression Ratio: 13.0:1
Cooling System: Liquid Cooled
Induction: Integrated ignition – injection system with six injectors Engine control unit Eldor EM2.0, throttle body full drive by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire Torque control with four maps, Traction Control with eight levels of intervention
Ignition: Digital CDI
Alternator: 350 W @ 5000 rpm
Battery: 12 V – 8.6 Ah
Starting: Electric
Max Power: 94.2 kW / 128 hp @ 14400 rpm
Max Torque: 71 Nm / 7.24 kgm @ 10600 rpm.
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st: 1/14.493 2nd: 1/10.821 3rd: 1/9.053 4th: 1/8.040 5th: 1/7.274 6th: 1/6.712
Final Drive Ratio: 16/43
Frame: ALS Steel tubular trellis, Rear swing arm pivot plates: material Aluminium alloy
Front Suspension: 43mm UPSIDE – telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment,
Front Wheel Travel: 125 mm / 4.92 in
Rear Suspension: Progressive, single shock absorber with rebound and compression (High speed/ Low speed) damping and spring preload adjustment
Rear Wheel Travel: 123 mm / 4.84 in
Front Brakes: 2x 320mm Double floating discs, 4 pistons calipers
Rear Brakes: Single 220mm disc, single piston calipers
Rim Front: Material/size Aluminium alloy 3.50 x 17
Rim Rear: Material/size Aluminium alloy 5.50 x 17
Front Tyre: 120/70-ZR17
Rear Tyre: 190/55-ZR17
Trail: 99 mm / 3.8 in
Rake: 23.6 degrees
Dimensions: Length 2060 mm./ 81.0 in Width 725 mm / 28.5 in Saddle height 805 mm / 31.6 in
Wheelbase: 1380 mm / 54.3 in
Seat Height: 805 mm / 31.6 in
Min. ground Clearance: 125 mm / 4.9 in
Dry Weight: 173 kg / 381.4 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption average: 17.9 km/lit
Standing 1/4 Mile: 11.1 sec
Top Speed: 258.5 km/h / 160.3 mph

The post MV Agusta F3 675 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Versys-X 300 (2017-18) https://motorcyclespecifications.com/kawasaki-versys-x-300-2017-18-specs/ Tue, 04 Apr 2023 03:21:08 +0000 https://motorcyclespecifications.com/?p=43816 The Kawasaki Versys-X 300 (2017-18) motorcycle has a 296cc 4-stroke parallel twin engine with a liquid cooling system and EFI induction. It has a 6-speed transmission with a wet, multiplate

The post Kawasaki Versys-X 300 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Versys-X 300 (2017-18) motorcycle has a 296cc 4-stroke parallel twin engine with a liquid cooling system and EFI induction. It has a 6-speed transmission with a wet, multiplate clutch and a chain, sealed final drive. The frame is made of high tensile steel, and the suspension consists of a 41 mm telescopic fork in the front and a bottom-link uni-trak with a gas-charged shock and adjustable preload in the back. The braking system includes a single 290 mm petal disc with balanced actuation dual piston in the front and a single 220 mm petal disc with dual piston in the rear. The wheels are made of steel alloy and are multi-spoke. The tire sizes are 100/90-19 M/C 57S in the front and 130/80-17 M/C 65S in the rear. The motorcycle has a fuel capacity of 17 L (4.5 US gal, 3.7 Imp gal) and meets Euro 4 emissions standards.


Technical specifications:

Make Model: Kawasaki Versys-X

Year: 2017 – 18
Engine: 4-Stroke parallel twin, DOHC, 8 valves
Capacity: 296 cc / 18.1 cu in
Bore x Stroke: 62 x 49 mm
Cooling System: Liquid cooled
Compression Ratio: 10.6:1
Lubrication: Forced, wet sump
Exhaust: Two into one
Emissions Standard: Euro 4
Induction: EFI 32 mm x 2 with dual throttle valves
Starting: Electric
Clutch: Wet, multiplate
Transmission: 6-Speed
Final Drive: Chain, sealed
Frame: Backbone, high tensile steel
Front Suspension: 41 mm Telescopic fork
Rear Suspension: Bottom-Link Uni-Trak, gas-charged shock and adjustable preload
Front Brakes: Single 290 mm petal disc, single caliper balanced actuation dual piston
Rear Brakes: Single 220 mm petal disc. Caliper: Dual piston
Wheels Front: Steel alloy, multi-spoke
Wheels Rear: Steel alloy, multi-spoke
Front Tyre: 100/90-19 M/C 57S
RearTyre: 130/80-17 M/C 65S
Fuel Capacity: 17 L / 4.5 US gal / 3.7 Imp gal

The post Kawasaki Versys-X 300 (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Vulcan S Café (2017-18) https://motorcyclespecifications.com/kawasaki-vulcan-s-cafe-2017-18-specs/ Tue, 04 Apr 2023 02:08:58 +0000 https://motorcyclespecifications.com/?p=43749 The Kawasaki Vulcan S Café (2017-18) motorcycle is a four-stroke, parallel twin cylinder bike that has a capacity of 649 cc. It has a liquid-cooled cooling system, a compression ratio

The post Kawasaki Vulcan S Café (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Vulcan S Café (2017-18) motorcycle is a four-stroke, parallel twin cylinder bike that has a capacity of 649 cc. It has a liquid-cooled cooling system, a compression ratio of 10.8:1, and uses fuel system DFI (R) with two 38mm throttle bodies, with sub-throttles for induction. The motorcycle has a maximum power of 61 hp (44.5 kW) at 7,500 rpm and a maximum torque of 63 Nm (46.5 ft.lb) at 6,600 rpm. It has a wet, multi-disc clutch and a 6-speed transmission with a positive neutral finder. The motorcycle also features a sealed chain final drive and a high-tensile steel double pipe perimeter frame. The front suspension is a 41 mm hydraulic telescopic fork, and the rear suspension is a lay-down offset rear shock with linkage and adjustable preload. The front and rear brakes are single-disc with 2 piston calipers and 1 piston caliper respectively. The motorcycle has a length of 2311 mm, a width of 881.3 mm, and a height of 1099.8 mm, with a wheelbase of 1574.8 mm. The seat height is 706 mm and the ground clearance is 129 mm. The motorcycle has a wet weight of 223.0 kg and a fuel capacity of 14 litres (3.7 US gal).


Technical specifications:

Make Model: Kawasaki VN 650 Vulcan S Caf~A(c)

Year: 2017 – 18
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder.
Capacity: 649 cc / 39.65 cu /in
Bore x Stroke: 83 x 60 mm
Cooling System: Liquid cooled
Compression Ratio: 10.8:1
Lubrication: Wet sump
Induction: Fuel system DFI (R) with two 38mm throttle bodies, with sub-throttles
Ignition: TCBI with digital advance
Starting: Electric
Max Power: 61 hp / 44.5 kW) @ 7500 rpm
Max Torque: 63 Nm / 46.5 ft.lb @ 6600 rpm
Clutch: Wet, Multi Disc
Transmission: 6 Speed with positive neutral finder
Final Drive: Sealed chain
Frame: High-tensile steel double pipe perimeter frame
Front Suspension: 41 mm hydraulic telescopic fork
Front Wheel Travel: 129 mm / 5.1 in
Rear Suspension: Lay-down offset rear shock with linkage and adjustable preload
Rear Wheel Travel: 81.2 mm / 3.2 in
Front Brakes: Single 300mm disc 2 piston caliper
Rear Brakes: Single 250mm disc 1 piston caliper
Front Tyre: 120/60 -R18
Rear Tyre: 160/60 R17
Dimensions: Length 2311 mm / 91.0 in. Width 881.3 mm / 34.7 in. Height 1099.8 mm / 43.3 in
Wheelbase: 1574.8 mm / 62 in.
Seat Height: 706 mm / 27.8 in
Ground Clearance: 129 mm / 5.1 in
Wet Weight: 223.0 kg / 491.7 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Kawasaki Vulcan S Café (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Indian Scout Sixty (2017-18) https://motorcyclespecifications.com/indian-scout-sixty-2017-18-specs/ Tue, 04 Apr 2023 01:55:05 +0000 https://motorcyclespecifications.com/?p=43736 The Indian Scout Sixty motorcycle is a 2017-18 model with a liquid-cooled, 60-degree V-twin engine and a capacity of 999.6 cc or 61 cubic inches. The engine has a semi-dry

The post Indian Scout Sixty (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Indian Scout Sixty motorcycle is a 2017-18 model with a liquid-cooled, 60-degree V-twin engine and a capacity of 999.6 cc or 61 cubic inches. The engine has a semi-dry sump lubrication system and a compression ratio of 10.7:1. It also features split dual exhaust with injection closed-loop sequential port fuel injection. The clutch is a wet, multi-plate type, and the transmission is five-speed. The bike has a belt drive with 141 teeth, and the front suspension is a 41mm telescopic fork with a front wheel travel of 120mm or 4.7 inches. The rear suspension is dual shocks with a rear wheel travel of 76mm or 3.0 inches. The front and rear brakes feature single 298mm rotors with 2 piston and 1 piston calipers, respectively. The front and rear wheels are cast 16 x 3.5 with a 130/90-16 72H front tire and 150/80-16 71H rear tire. The bike is 2311 mm or 91 inches in length, 880 mm or 34.6 inches in width, and 1207 mm or 47.5 inches in height, with a wheelbase of 1562 mm or 61.5 inches. The seat height is 643 mm or 25.3 inches, and the dry weight is 246 kg or 542.3 lbs while the wet weight is 256 kg or 564.8 lbs. The bike has a ground clearance of 135 mm or 5.3 inches and a fuel capacity of 12.5 liters or 3.3 gallons, and a maximum power output of 78 hp or 56.9 kW at 7300 rpm, and maximum torque of 88.8 Nm or 65.5 lb-ft at 5600 rpm.


Technical specifications:

Make Model: Indian Scout Sixty

Year: 2017 – 18
Engine: Four stroke, 60 degrees V-Twin, DOHC, 4 valves per cylinder
Capacity: 999.6 cc / 61 cu in
Bore x Stroke: 93 x 73.6 mm
Cooling System: Liquid Cooled
Lubrication: Semi-Dry Sump
Compression Ratio: 10.7:1
Exhaust: Split dual exhaust with crossover
Induction: Injection. Closed Loop Sequential Port Fuel Injection
Engine Oil: SAE 15W60
Oil Capacity: 4.73 Litres
Charging System: 35 amp max output
Battery: 12 volts / 12 amp/hour, 210 CCA, Maintenance Free AGM
Starting: Electric
Max Power: 78 hp / 56.9 kW @ 7300 rpm
Max Torque: 88.8 Nm / 65.5 lb-ft @ 5600rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed
Final Drive: Belt drive, 141 tooth
Front Suspension: 41 mm Telescopic fork,
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Dual shocks
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 298 mm rotor with 2 piston caliper
Rear Brakes: Single 298 mm rotor with 1 piston caliper
Front Wheel: Cast 16 x 3.5
Rear Wheel: Cast 16 x 3.5
Front Tyre: 130/90-16 72H
Rear Tyre: 150/80-16 71H
Rake: 29 degrees
Trail: 119.9 mm / 4.7 in
Dimensions: Length 2311 mm / 91 in Width 880 mm / 34.6 in Height 1207 mm / 47.5 in
Wheelbase: 1562 mm / 61.5 in
Seat Height: 643 mm / 25.3 in
Dry Weight: 246 kg / 542.3 lbs
Wet Weight: 256 kg / 564.8 lbs
Ground Clearance: 135 mm / 5.3 in
GVWR: 449 kg / 988 lbs
Fuel Capacity: 12.5 Litres / 3.3 gal

The post Indian Scout Sixty (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
BMW S 1000R (2017-18) https://motorcyclespecifications.com/bmw-s-1000r-2017-18-specs/ Mon, 03 Apr 2023 23:37:01 +0000 https://motorcyclespecifications.com/?p=43609 The BMW S 1000R motorcycle was manufactured in 2017-2018 with a four-stroke, transverse four-cylinder, DOHC engine with a capacity of 999cc. It has a compression ratio of 12.0:1 and is

The post BMW S 1000R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The BMW S 1000R motorcycle was manufactured in 2017-2018 with a four-stroke, transverse four-cylinder, DOHC engine with a capacity of 999cc. It has a compression ratio of 12.0:1 and is fitted with electronic fuel injection, digital motor electronics BMS-KP induction, and a wet sump lubrication system. The bike has a maximum power output of 121 kW/165 hp at 11,000 rpm and a maximum torque output of 112 Nm/84 lb-ft at 9250 rpm. It also features a multiple-disc antihopping clutch, six-speed transmission, and a chain final drive. The chassis is an aluminum bridge frame, and the suspension is an adjustable upside-down fork and aluminum double-strut swingarm with electronic damping adjustment. The bike’s braking system consists of dual 320 mm discs and 4-piston calipers in the front and a single 220 mm disc and 1-piston caliper in the rear. An optional equipment BMW Motorrad Race ABS (partially integral, disengageable) is also available. The front and rear wheels are respectively sized at 3.50 x 17″ and 6.00 x 17″, with tire sizes of 120/70 ZR17 and 190/55 ZR17. The bike has a seat height of 813 mm/32.0 in, wet weight of 205 kg/ 452 lbs and a fuel capacity of 17.5 Litres/4.6 US gal.


Technical specifications:

Make Model: BMW S 1000R

Year: 2017 – 18
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 999 cc / 60.9 cu-in
Bore x Stroke: 80 x 49.7 mm
Intake / exhaust ~A: 33.5 mm / 27.2 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Electronic fuel injection, digital motor electronics BMS-KP
Emission Control: Two regulated three-way catalytic converters, EU-3
Starting: Electric
Electrical system: Alternator W 350 Battery V/Ah 12/9, maintenance-free (with DWA 12/10) Headlight W low beam 1 x H 7/55 W high beam 1 x H 7/55 W
Max Power: 121 kW / 165 hp @ 11000 rpm
Max Torque: 112 Nm / 84 lb-ft @ 9250 rpm
Clutch: Multiple disc antihopping clutch in oil bath, mechanically operated
Transmission: 6 Speed
Final Drive: Chain 17/45
Primary Ratio: 1.652
Gear Ratio: Ist 2.647 2nd 2.091 3rd 1.727 4th 1.5 5th 1.36 6th 1.261
Frame: Construction type aluminium bridge frame, enqine self-supporting
Front Suspension: Upside-down fork, stanchion diameter 46 mm, adjustable for bump and rebound SA DDC: electronically adjustable damping
Front Wheel Travel: 120 mm / 4.7″
Rear Suspension: Aluminium double-strut swingarm with central spring strut, adjustable rebound, SA DDC: electronically adjustable damping
Rear Wheel Travel: 120 mm / 4.7″
Front Brakes: 2 x 320mm Discs, 4 piston calipers
Rear Brakes: Single 220mm disc, 1 piston caliper
ABS: Optional equipment BMW Motorrad Race ABS (partially integral, disengageable)
Wheels Front: 3.50 x 17″
Wheel Rear: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Wheel Castor: 98.5 mm / 3.88″
Steering Head Angle: 65.4 degrees
Dimensions: Length 2057 mm / 81.0 in. Width 845 mm / 33.3 in. (incl. mirrors) Height ,228 mm / 48.3 in
Wheelbase: 1440 mm / 56.7 in.
Seat Height: 813 mm / 32.0 in.
Wet Weight: 205 kg / 452 lbs
Fuel Capacity: 17.5 Litres / 4.6 US gal.

The post BMW S 1000R (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Street Scrambler (2017-18) https://motorcyclespecifications.com/triumph-street-scrambler-2017-18-specs/ Mon, 03 Apr 2023 22:57:10 +0000 https://motorcyclespecifications.com/?p=43570 The Triumph Street Scrambler is a motorcycle model produced in 2017-18 with a 900 cc four-stroke engine. It has a liquid-cooled, 270-degree crank angle parallel twin, SOHC, and 8 valves.

The post Triumph Street Scrambler (2017-18) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Street Scrambler is a motorcycle model produced in 2017-18 with a 900 cc four-stroke engine. It has a liquid-cooled, 270-degree crank angle parallel twin, SOHC, and 8 valves. The bike has a brushed stainless steel two-into-two exhaust system with twin silencers and multipoint sequential electronic fuel injection. It has a five-speed transmission, wet multi-plate slip-assist clutch, and chain final drive. The front suspension is a Kayaba 41mm fork with 120mm / 4.7 inches of wheel travel, while the rear suspension has Kayaba twin shocks and adjustable preload with 120mm / 4.7 inches of wheel travel. The front brakes feature a single 310mm disc, Nissin 2 piston floating caliper, and ABS, while the rear brakes have a single 255mm disc, Nissin 2 piston floating caliper, and ABS. The bike has 32-spoke wheels with a 19 x 2.5-inch front wheel and a 17 x 4.25-inch rear wheel, and is equipped with 100/90-19 front tires and 150/70 R17 rear tires. The rake is 25.6 degrees with a trail of 109mm / 4.3 inches. The dimensions of the bike are 836mm / 32.8 inches in width, 1180mm / 46.4 inches in height (without mirrors), and a wheelbase of 1446mm / 57.7 inches. The seat height is 790mm / 31.1 inches, and the dry weight is 206kg / 454lbs. The bike has a fuel capacity of 12 litres / 3.2 US gallons / 2.7 Imp gallons.


Technical specifications:

Make Model: Triumph Street Scrambler

Year: 2017 – 18
Engine: Four stroke, 270 degrees Crank angle parallel twin, SOHC, 8 valves
Capacity: 900 cc / 54.9 cu in
Bore x Stroke: 84.6 x 80 mm
Cooling System: Liquid cooled
Compression Ratio: 10.55:1
Lubrication: Wet sump
Exhaust: Brushed stainless steel 2 into 2 exhaust system with twin silencers
Induction: Multipoint sequential electronic fuel injection
Ignition: Digital
Starting: Electric
Max Power: 40.5 kW / 55 hp @ 5900 rpm
Max Torque: 80 Nm / 8.16 kgf-m / 59 ft-lb @ 3230 rpm
Clutch: Wet, multi-plate, slip-assist
Transmission: 5-Speed
Final Drive: Chain, X-ring
Frame: Tubular steel cradle, twin-sided tubular steel swing-arm
Front Suspension: Kayaba 41 mm fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Kayaba twin shocks with adjustable preload
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 310mm disc, Nissin 2 piston floating caliper, ABS
Rear Brakes: Single 255mm disc, Nissin 2 piston floating caliper, ABS
Wheels Front: 32-spoke, 19 x 2.5in
Wheels Rear: 32-spoke, 17 x 4.25in
Front Tyre: 100/90-19
Rear Tyre: 150/70 R17
Rake: 25.6 degrees
Trail: 109 mm / 4.3 in
Dimensions: Width: 836 mm / 32.8 in Height: 1180 mm / 46.4 in (without mirrors)
Wheelbase: 1446 mm / 57.7 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 206 kg / 454 lbs
Fuel Capacity: 12 Litres / 3.2 US gal / 2.7 Imp gal

The post Triumph Street Scrambler (2017-18) appeared first on MotorcycleSpecifications.com.

]]>