Honda CBR1000RR-SP Fireblade Black (2019)
The Honda CBR1000RR-SP Fireblade Black (2019) is a high-performance motorcycle with a four-stroke, transverse four-cylinder engine and a capacity of 999 cc. It has a compression ratio of 13.0:1 and is liquid-cooled with wet sump lubrication. The motorcycle also has programmed dual-stage fuel injection and a computer-controlled digital transistorized ignition with 3-D mapping. The clutch is wet and multiplate with a diaphragm spring, and the transmission has six speeds. The final drive is a #530 o-ring-sealed chain. The frame is a diamond aluminum composite twin spar, and the front suspension is a telescopic inverted fork with an inner tube diameter of 43mm. The rear suspension is a unit pro-link with a gas-charged TTX36 Smart-EC ~Ahlins damper. The front brakes have two 320mm hydraulic discs, and the rear brake has a single 220mm disc with combined ABS and sintered metal pads. The motorcycle has electronically controlled ABS and 17-inch rims with a front tyre size of 120/70ZR17 58W and a rear tyre size of 190/50ZR17 73W. The length of the motorcycle is 205 mm, width is 720 mm, and height is 1125 mm, with a wheelbase of 1405 mm and a ground clearance of 129mm. The motorcycle weighs 195 kg with a fuel capacity of 16 litres.
Technische Daten:
Marke Modell: Honda CBR 1000RR-SP Fireblade
Jahr: 2019
Motor: Viertakt, querliegender Vierzylinder, DOHC, 4 Ventile pro Zylinder.
Hubraum: 999 cm³ / 60,9 in cm³ / 60,9 cu-in
Bohrung x Hub: 76 x 55,1 mm
Verdichtungsverhältnis: 13,0:1
Kühlsystem: Flüssigkeitskühlung
Schmierung: Nasssumpf
Motoröl: Synthetisch, 10W/40
Induktion: Einspritzung. Programmierte zweistufige Kraftstoffeinspritzung (PGM-DSFI) mit 46-mm-Drosselklappen, Denso 12-Loch-Injektoren
Zündung: Computergesteuerte digitale Transistorzündung mit 3-D-Mapping
Anfahren: Elektrisch
Maximale Leistung: NA
Max. Drehmoment: NA
Kupplung: Nass, Mehrscheibenkupplung mit Tellerfeder
Getriebe: 6-Gang
Final Drive: #530 O-ring – sealed chain
Rahmen: Diamant; Aluminium-Verbund-Doppelholm
Vorderradaufhängung: Teleskopische Upside-down-Gabel mit einem Innenrohrdurchmesser von 43 mm und einer NIX30 Smart-EC ~Ahlins-Vorderradgabel mit Vorspannungs-, Druck- und Zugstufeneinstellung
Federweg Vorderrad: 120 mm / 4.7 in
Hinterradaufhängung: Unit Pro-Link mit gasaufgeladenem TTX36 Smart-EC ~Ahlins-Dämpfer mit Einstellung der Vorspannung und der Druck- und Zugstufendämpfung
Hinterradfederweg: 132 mm / 5.2 in
Bremsen vorne: 2x 320-mm-Hydraulikscheiben mit radial montierten Tokico-Bremssätteln und Hochleistungs-Belägen für die Rennstrecke hinten.
Hintere Bremsen: Einzelne 220-mm-Scheibe, kombinierte ABS- und Sintermetallbeläge
ABS: Elektronisch gesteuertes ABS
Reifen vorne: 120/70ZR17 58W
Hinterreifen: 190/50ZR17 73W
Felgengröße vorne: 17 x MT3.50
Felgengröße hinten: 17 x MT6.00
Nachlauf (Nachlaufwinkel): 23 Grad2
Nachlauf: 96,2 mm / 3,8 in
Abmessungen: Länge 205 mm / 81.7 in Breite 720 mm / 32.3 in Höhe 1125 mm / 44.7 in
Radstand: 1405 mm / 55.3 in
Sitzhöhe: 820 mm / 32.3 in
Bodenfreiheit: 129mm / 5.1 in
Nassgewicht: 195 kg / 430 lbs
Kraftstoffkapazität: 16 Liter / 4.2 US gal
Verwandte Modelle:
- Honda XL 600V Transalp (1996)
- Honda CX650F (1984)
- Honda VFR1200 DCT (2016-17)
- Honda CBR 600RR (2017)
- Honda C100 Cub (1958-67)
- Honda XRV750 Africa Twin (1992)
- Honda CMX 250 Rebel (2010-12)
- Honda XR 250L (2002)
- Honda CB400 Bol D (2014-15)
- Honda CB400 Bol D (2012-13)
- Honda CBX 400F2 (1984-85)
- Honda CBR 1000 RR (2019)
- Honda CRF 230M (2009)
- Honda XL250S (1978-79)
- Honda XR 600R (1997)
- Honda CBR1000RR Fireblade (2013)
- Honda NSS 300 Forza (2018)
- Honda CB450S (1987)