1994 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sun, 16 Apr 2023 21:17:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Norton Roton Crighton (1994) https://motorcyclespecifications.com/norton-roton-crighton-1994-specs/ Fri, 07 Apr 2023 09:47:10 +0000 https://motorcyclespecifications.com/?p=48116 The Norton Roton Crighton (1994) motorcycle has a twin cylinder, rotary engine with a capacity of 588 cc and liquid cooling. It has a compression ratio of 10:1 and twin

The post Norton Roton Crighton (1994) appeared first on MotorcycleSpecifications.com.

]]> The Norton Roton Crighton (1994) motorcycle has a twin cylinder, rotary engine with a capacity of 588 cc and liquid cooling. It has a compression ratio of 10:1 and twin ~A36 mm Amal smoothbore carburetors. The ignition is Crighton “Hall Effect” capacitive discharge type and it can reach a maximum power of 112 kW/150 hp at 10000 rpm. The rear tyre power is 105.6 Nm / 10.8 kgf-m / 78 lbs-ft at 8500 rpm. It has a 20 plate hydraulically operated aluminium wet clutch and a 6-speed, close ratio transmission. The frame is a twin spar, triple section, aircraft specification extruded aluminium, and it is equipped with Whitepower upside-down, fully adjustable front forks and twin Whitepower rear dampers. The front brakes are twin cross-drilled ~A320 mm front discs with AP one piece 4 piston caliper while the rear brake is a single ~A190 mm cross-drilled rear disc with a twin-piston Brembo caliper. It has Dunlop radials for both front and rear tyres and magnesium alloy wheels. The dry weight of the motorcycle is 134 kg / 295 lbs.

Technical specifications:

Make Model: Norton Roton Crighton

Year: 1994
Engine: Twin cylinder, rotary
Capacity: 588 cc / 35.9 cu in
Cooling System: Liquid cooled
Compression Ratio: 10:1
Induction: Twin ~A36 mm Amal smoothbore carburetors
Ignition: Crighton “Hall Effect” capacitive discharge type
Max Power: 112 kW / 150 hp @ 10000 rpm
Rear Tyre Power: 105.6 Nm / 10.8 kgf-m / 78 lbs-ft @8500 rpm
Clutch: 20 Plate hydraulically operated aluminium wet clutch
Transmission: 6-Speed, close ratio
Frame: Twin spar, triple section, aircraft specification extruded aluminium
Front Suspension: Whitepower upside down, fully adjustable front forks.
Rear Suspension: Twin Whitepower rear dampers, adjustable ride height all round.
Front Brakes: Twin cross drilled ~A320 mm front discs with AP one piece 4 piston caliper
Rear Brakes: Single ~A190 mm cross drilled rear disc with twin piston Brembo caliper
Wheels: Magnesium alloy
Front Rim: 3.75 x 17 in
Rear Rim: 6.00 or 6.25 x 17 in
Front Tyre: Dunlop radials
Rear Tyre: Dunlop radials
Dry Weight: 134 kg / 295 lbs

The post Norton Roton Crighton (1994) appeared first on MotorcycleSpecifications.com.

]]> BMW K 75RTA (1994) https://motorcyclespecifications.com/bmw-k-75rta-1994-specs/ Fri, 07 Apr 2023 09:27:19 +0000 https://motorcyclespecifications.com/?p=48098 The BMW K 75RTA is a motorcycle with a four-stroke, horizontal three cylinder in-line engine that is liquid-cooled, DOHC and has two valves per cylinder. Its capacity is 740 cc

The post BMW K 75RTA (1994) appeared first on MotorcycleSpecifications.com.

]]> The BMW K 75RTA is a motorcycle with a four-stroke, horizontal three cylinder in-line engine that is liquid-cooled, DOHC and has two valves per cylinder. Its capacity is 740 cc and its bore x stroke is 67 x 70 mm with a compression ratio of 11.0:1. Its induction is electronic injection, Bosch LE-Jettronic and its ignition is electronic ignition Bosch LE-Jettronic. It has an electric starting mechanism and a maximum power of 54.7 kW / 75 hp @ 8500 rpm, as well as a maximum torque of 68 Nm / 6.9 kgf-m / 50 ft lb @ 6750 rpm. Its transmission is five-speed and its final drive is shaft.

The front suspension of the motorcycle is a telescopic fork with hydraulic shock absorber, with a front wheel travel of 185mm / 7.3 in. Its rear suspension is a monolever swinging arm with a rear wheel travel of 14mm / 4.5 in. The front brakes are two x 285mm discs, 2 piston calipers and the rear brakes are a single 285mm disc, 1 piston caliper. The front tyre is 100/90-V18 and the rear tyre is 130/90-V17. The wet-weight of the motorcycle is 229 kg / 505 lbs and its fuel capacity is 21 L / 5.5 US gal.

Technical specifications:

Make Model: BMW K 75RTA

Year: 1994
Engine: Four-stroke, horizontal three cylinder in-line, liquid cooled, DOHC, 2 valves per cylinder
Capacity: 740 cc / 45 cub. in.
Bore x Stroke: 67 x 70 mm
Compression Ratio: 11.0:1
Induction: Electronic injection, Bosch LE-Jettronic
Ignition: Electronic ignition Bosch LE-Jettronic
Starting: Electric
Max Power: 54.7 kW / 75 hp @ 8500 rpm
Max Torque: 68 Nm / 6.9 kgf-m / 50 ft lb @ 6750 rpm
Transmission: 5 speed
Final Drive: Shaft
Front Suspension: Telescopic fork with hydraulic shock absorber
Front Wheel Travel: 185mm / 7.3 in.
Rear Suspension: Monolever swinging arm.
Rear Wheel Travel: 14mm / 4.5 in.
Front Brakes: 2 x 285mm discs, 2 piston calipers
Rear Brakes: Single 285mm disc, 1 piston caliper
Front Tyre: 100/90-V18
Rear Tyre: 130/90-V17
Wet-Weight: 229 kg / 505 lbs
Fuel Capacity: 21 L / 5.5 US gal

The post BMW K 75RTA (1994) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 II Evoluziono Limited Edition (1994) https://motorcyclespecifications.com/cagiva-mito-125-ii-evoluziono-limited-edition-1994-specs/ Fri, 07 Apr 2023 04:29:01 +0000 https://motorcyclespecifications.com/?p=47823 The Cagiva Mito 125 II Evoluziono Limited Edition is a rare motorcycle with only 100 units produced in 1994. It has a two-stroke, single-cylinder engine with a capacity of 125.6

The post Cagiva Mito 125 II Evoluziono Limited Edition (1994) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II Evoluziono Limited Edition is a rare motorcycle with only 100 units produced in 1994. It has a two-stroke, single-cylinder engine with a capacity of 125.6 cc and a compression ratio of 13.0:1. The bike has a 28mm Dell’Orto flat slide carburetor for induction and CDI for ignition. It can produce a maximum power of 33.5 hp at 10500 rpm and a maximum torque of 19 Nm at 9000 rpm. The transmission has seven speeds, and the final drive is through a chain. The bike has USD telescopic forks for the front suspension and a swinging arm single shock for the rear suspension. Braking is through a single 320mm disc with a four-piston caliper for the front and a single 230mm disc with a one-piston caliper for the rear. The bike has a dry weight of 117 kg and a fuel capacity of 12.8 litres. It can go from 0 to 60 km/h in 13.1 m and from 0 to 100 km/h in 37.0 m. The standing quarter-mile time for the bike is 14.0 seconds, and its top speed is 164.2 km/h.

Technical specifications:

Make Model: Cagiva Mito 125 II Evoluziono Limited Edition

Year: 1994
Production: 100 Units
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125 II Evoluziono Limited Edition (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GSX-R 1100 (1994) https://motorcyclespecifications.com/suzuki-gsx-r-1100-1994-specs/ Thu, 06 Apr 2023 23:39:07 +0000 https://motorcyclespecifications.com/?p=47561 The Suzuki GSX-R 1100 is a motorcycle that was produced in 1994. It has a four-stroke, transverse four-cylinder engine that has a capacity of 1074 cc and a compression ratio

The post Suzuki GSX-R 1100 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GSX-R 1100 is a motorcycle that was produced in 1994. It has a four-stroke, transverse four-cylinder engine that has a capacity of 1074 cc and a compression ratio of 11.2:1. The bike is liquid-cooled and uses 10W/40 engine oil. The exhaust system is made of stainless steel and has a 4-into-2-into-1-into-2 configuration. The bike has a maximum power output of 114.7 kW/156 hp at 10000 rpm and a maximum torque of 115 Nm/11.7 kgf-m/84.8 ft-lb at 9000 rpm. The transmission is a 5-speed and the final drive is a chain. The bike has a double-cradle frame made of extruded aluminum alloy and pentagon-shaped rails. The front suspension is a Kayaba upside-down fork that is preload, compression, and rebound damping adjustable, while the rear suspension is a bottom-link type that is also adjustable for preload, compression, and rebound damping. The bike has front and rear brakes that are disc-type and uses alloy aluminum, three-spoke Enkei rims that are 3.5 inches wide in the front and 5.5 inches wide in the rear. The bike has a wheelbase of 1485 mm, a dry weight of 231 kg, and a wet weight of 254 kg. The fuel capacity is 21 liters, has an average consumption of 6.7 L/100 km and a top speed of 272 km/h. The Suzuki GSX-R 1100 comes in three colors: blue/white, red/black, and black.

Technical specifications:

Make Model: Suzuki GSX-R 1100

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder,
Capacity: 1074 cc / 65.5 cub. in.
Bore x Stroke: 75.5 x 60 mm
Compression Ratio: 11.2:1
Cooling System: Liquid cooled
Engine Oil: 10W/40
Exhaust System: Stainless steel, 4-into-2-into-1-into-2
Lubrication: Wet sump
Induction: 4 x 40 mm Mikuni BST carburetors
Ignition: Analog CDI
Spark Plug: NGK
Starting: Electric
Max Power: 114.7 kW / 156 hp @ 10000 rpm
Max Power Rear Wheel: 101.4 kW / 137.8 hp @ 10000 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 84.8 ft-lb @ 9000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain, 114 links
Gear Ratios: 1st 2.71 / 2nd 1.81 / 3rd 1.41 / 4th 1.18 / 5th 1.04:1
Frame: Double-cradle frame rails extruded aluminium alloy, pentagon-shape
Front Suspension: Kayaba upside-down forks, preload, compression and rebound damping adjustable.
Rear Suspension: Bottom-link type, preload, compression and rebound damping adjustable
Front Brakes: 2 x 310 mm Discs, six-piston calipers
Rear Brakes: Single 240 mm disc, single piston caliper
Wheels: Alloy aluminum, 3 spoke Enkei rims
Front Rim: 89 mm / 3.5 in.
Rear Rim: 140 mm / 5.5 in.
Front Tyre: 120/70ZR17
Rear Tyre: 180/55ZR17
Rake: 24.8 degrees
Trail: 100 mm / 3.9in.
Dimensions: Length 2130 mm / 83.9 in. Width 755 mm / 29.7 in. Height 1190 mm / 46.9 in.
Wheelbase: 1485 mm / 58.5 in.
Seat Height: 815 mm / 32.1 in.
Ground Clearance: 130 mm / 5.1 in.
Dry Weight: 231 kg / 509 lbs
Wet Weight: 254 kg / 560 lbs
Fuel Capacity: 21 Litres / 5.5 US gal / 4.6 Imp gal
Average Consumption: 6.7 L/100 km / 14.8 km/l / 34.8 US mpg / 42 Imp mpg
Braking 60 km/h / 37 mph – 0: 13.2 m / 43.3 ft.
Braking 100 km/h / 62 mph – 0: 37.2 m / 122 ft.
Standing 1/4 mile: 10.5 sec / 222 km/h / 138mph
Top Speed: 272 km/h / 169 mph
Colours: Blue/White, Red/Black, Black

The post Suzuki GSX-R 1100 (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki RGV 250 (1994) https://motorcyclespecifications.com/suzuki-rgv-250-1994-specs/ Thu, 06 Apr 2023 17:26:45 +0000 https://motorcyclespecifications.com/?p=47225 The Suzuki RGV 250 motorcycle was manufactured in 1994 and is a two-stroke, 90-degree V-twin reed valve engine with a capacity of 249cc. It has a compression ratio of 7.3:1

The post Suzuki RGV 250 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki RGV 250 motorcycle was manufactured in 1994 and is a two-stroke, 90-degree V-twin reed valve engine with a capacity of 249cc. It has a compression ratio of 7.3:1 and is cooled by a liquid cooling system. The bike features a 2 x Mikuni TM34SS semi-flat carburetor induction system and a pointless electrical ignition. Starting is done via kick, and the bike has a maximum power of 45.5 kW / 61 hp at the rear tire at 11000 RPM. The maximum torque is 40 Nm / 4.1 kgf-m / 29.5 lb-ft at 8000 rpm. The motorcycle has a wet, multi-plate clutch and a 6-speed transmission with constant mesh. The frame is a twin spar, aluminum structure with a rake of 25 degrees and a trail of 94 mm / 3.7 in. The bike has a wet weight of 161kg/355 lbs and a fuel capacity of 17 liters/4.5 US gal/3.7 Imp gal. The Suzuki RGV 250 has 120mm/4.7 in front wheel travel and a rear wheel travel of 140mm/5.5 in. The front brakes are 2 x 300 mm discs, 4 piston calipers while the rear brake has a single 210 mm disc, 1 piston caliper. The bike’s ground clearance is 120 mm/4.7 in and has a seat height of 755 mm/29.7 in. The Suzuki RGV 250 can go from 0 to 60km/h in 12.4 meters/40.7 feet and from 0 to 100 km/h in 36.0 meters/118 feet. It can reach a top speed of 205.4 km/h/127.6 mph, and the Tuttomoto 1994 Road Test shows a standing 1/4 Mile of 12.5 sec/ 167.8km/104.3 mph.

Technical specifications:

Make Model: Suzuki RGV 250

Year: 1994
Engine: Two stroke, 90 degrees V- twin, reed valve
Capacity: 249 cc / 15.2 cu in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 7.3:1
Cooling System: Liquid cooled
Induction: 2 x Mikuni TM34SS semi-flat carburetors
Ignition: Pointless Electrical Ignition
Spark Plug: NGK BR9ES
Battery: 12V, 5Ah
Starting: Kick
Max Power: 45.5 kW / 61 hp @ 11000 rpm (rear tyre: 43.3 kW / 58 hp @ 11000rpm)
Max Torque: 40 Nm / 4.1 kgf-m / 29.5 lb-ft @ 8000 rpm
Clutch: Wet, multi-plate
Transmission: 6 Speed, constant mesh
Primary Reduction: 2.565 (59/23)
Gear Ratios: 1st 2.454 (27/11) / 2nd 1.625 (26/16) / 3rd 1.235 (21/17) / 4th 1.045 (23/22) / 5th 0.916 (22/24) / 6th 0.840 (21/25)
Final Drive: Chain, DID520V2, 114 links
Front Suspension: USD telescopic fork, 5-way adjustable with anti-dive, oil dampened
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Full Floater, mono-shock, gas/oil damped, 7-way adjustable
Rear Wheel Travel: 140 mm / 5.5 in
Front Brakes: 2 x 300 mm Discs ,4 piston calipers
Rear Brakes: Single 210 mm disc, 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 140/60-18
Frame: Twin spar, aluminium
Rake: 25o
Trail: 94 mm / 3.7 in
Dimensions: Length: 2015 mm / 79.3 in Width: 695 mm / 27.4 in Height: 1065 mm / 41.9 in
Wheelbase: 1375 mm / 54.1 in
Ground Clearance: 120 mm / 4.7 in
Seat Height: 755 mm / 29.7 in
Turning Radius: 3.1 m / 10.2 ft
Lean Angle: 58 degrees
Wet Weight: 161 kg / 355 lbs
Fuel Capacity: 17 Litres / 4.5 US gal / 3.7 Imp gal
Oil Capacity: 1.1 Litres / 12 US qt / 1.0 Imp qt
Consumption Average: 8.0 L/100 km / 12.5 km/l / 29.4 US mpg / 35.3 Imp mpg
Braking 60 km/h – 0: 12.4 m / 40.7 ft
Braking 100 km/h – 0: 36.0 m / 118 ft
Standing 1/4 Mile: 12.5 sec / 167.8 km/ / 104.3 mph
Top Speed: 205.4 km/h / 127.6 mph
Road Test: Tuttomoto 1994

The post Suzuki RGV 250 (1994) appeared first on MotorcycleSpecifications.com.

]]> Bimota DB2SR (1994) https://motorcyclespecifications.com/bimota-db2sr-1994-specs/ Thu, 06 Apr 2023 13:22:01 +0000 https://motorcyclespecifications.com/?p=47002 The Bimota DB2SR is a rare motorcycle that was produced in 1994, with only 157 units made. It has a four-stroke, 90-degree L twin-cylinder engine with a capacity of 904cc

The post Bimota DB2SR (1994) appeared first on MotorcycleSpecifications.com.

]]> The Bimota DB2SR is a rare motorcycle that was produced in 1994, with only 157 units made. It has a four-stroke, 90-degree L twin-cylinder engine with a capacity of 904cc and a compression ratio of 9.2:1, with a maximum power output of 89.4 horsepower and 66.5 lb-ft of torque at 5250 rpm. It uses a fuel injection system and has an electric start. The motorcycle has a chain final drive and a six-speed transmission. The frame is made of tubular chrome, and the front suspension uses Paioli telescopic forks, while the rear suspension has a tubular steel swinging arm monoshock. The front brakes consist of 2X 320mm discs with 4-piston calipers, while the rear brake is a single 230mm disc with a 2-piston caliper. The motorcycle has a dry weight of 168 kg and a fuel capacity of 16 litres. It has a top speed of 225.4 km/h and can do the 1/4 mile in 11.4 seconds at a speed of 189.4 km/h. It has been reviewed positively by Moto Sprint in 1994 and Cycle World in 1995.

Technical specifications:

Make Model: Bimota DB2SR

Year: 1994
Production: 157 units
Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder
Capacity: 904 cc / 55.2 cub in.
Bore x Stroke: 92 x 68 mm
Compression Ratio: 9.2:1
Cooling System: Air cooled
Induction: Fuel injection Molynum steal.
Ignition: –
Starting: Electric
Max Power: 66.7 kW / 89.4 hp @ 7500 rpm
Max Power Rear Tyre: 58.9 kW / 79 hp @ 7400 rpm
Max Torque: 88.3 NM / 9 kgf-m / 66.5 lb-ft @ 5250 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular chrome
Front Suspension: Paioli telescopic forks
Rear Suspension: Tubular steal swinging arm monoshock
Front Brakes: 2X 320mm discs 4 piston calipers
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Dry Weight: 168 kg / 396.8 lbs.
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 6 l/100km / 39.5 mpg
Braking 60 – 0 / 100 – 0: 12.5 m / 36.1 m / 41 ft / 118.4 ft
Standing 1/4 Mile: 11.4 sec / 189.4 km/h / 117.7 mph
Top Speed: 225.4 km/h / 140 mph
Road Test: Moto Sprint 1994 Cycle World 1995

The post Bimota DB2SR (1994) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki ZX9R (1994) https://motorcyclespecifications.com/kawasaki-zx9r-1994-specs/ Thu, 06 Apr 2023 06:14:00 +0000 https://motorcyclespecifications.com/?p=46619 The Kawasaki ZX-9R Ninja is a 1994 motorcycle with a four-stroke, transverse four-cylinder engine. It has a capacity of 899cc, 4 valves per cylinder, and is liquid-cooled. The compression ratio

The post Kawasaki ZX9R (1994) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki ZX-9R Ninja is a 1994 motorcycle with a four-stroke, transverse four-cylinder engine. It has a capacity of 899cc, 4 valves per cylinder, and is liquid-cooled. The compression ratio is 11.5:1 and it has 4x 40mm Keihin carburetors. The ignition system is digital with Kawasaki Throttle Responsive Ignition Control. The bike has a maximum power output of 139 hp/103.6 kW at 10500 rpm and a maximum torque of 94 Nm/69.4 lb-ft at 9000 rpm. It has a 6-speed transmission and a chain final drive. The frame is an aluminum twin-spar and the front suspension is a 43 mm upside-down KYB fully adjustable, with adjustable compression, rebound, and preload. The rear suspension is a Uni-Trak adjustable compression, rebound, and preload. Brake-wise, the front features 2x 310mm discs with 4 piston calipers and the rear has a single 210mm disc with 1 piston caliper. The bike has a top speed of 276.4 km/h (171.7 mph) and can reach 0-60mph in 10.2 seconds. The fuel capacity is 20 Litres / 5.0 US gal and it has an average fuel consumption of 18.9 km/lit. It has a dry weight of 216 kg / 477 lbs and a wet weight of 242 kg / 533 lbs.

Technical specifications:

Make Model: Kawasaki ZX-9R Ninja

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 899 cc / 54.8 cu-in
Bore x Stroke: 73 x 53.7 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: 4x 40mm Keihin carburetors
Ignition: Digital with Kawasaki Throttle Responsive Ignition Control (K-TRIC)
Starting: Electric
Max Power: 139 hp / 103.6 kW @ 10500 rpm
Max Power Rear Tyre: 129.ho / 96.1 kW @ 10400 rpm
Max Torque: 94 Nm / 69.4 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminum twin-spar
Front Suspension: 43 mm upside-down KYB fully adjustable, adjustable compression, rebound and preload.
Rear Suspension: Uni-Trak adjustable compression, rebound and preload.
Front Brakes: 2x 310mm discs 4 piston calipers
Rear Brakes: Single 210mm disc 1 piston caliper
Front Tyre: 120/70 ZR7
Rear Tyre: 180/55 ZR17
Rake: 24 degrees
Trail: 97 mm / 3.8 in
Wheelbase: 1410 mm / 55.7 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 216 kg / 477 lbs
Wet Weight: 242 kg / 533 lbs
Fuel Capacity: 20 Litres / 5.0 US gal
Consumption Average: 18.9 km/lit
Braking 60 – 0 / 100 – 0: 12.9 m / 37.2 m
Standing 1/4 Mile: 10.2 sec / 215.7 km/h
Top Speed: 276.4 km/h / 171.7 mph
Road Test: Motosprint 1994 Motosprint 1994 Test

The post Kawasaki ZX9R (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki DR 650 R/S (1994) https://motorcyclespecifications.com/suzuki-dr-650-r-s-1994-specs/ Wed, 05 Apr 2023 18:41:12 +0000 https://motorcyclespecifications.com/?p=45988 The Suzuki DR 650R/S motorcycle was made in 1994 and has an air/oil cooled, four-stroke, single-cylinder engine with a capacity of 640 cc. It has a compression ratio of 9.7:1

The post Suzuki DR 650 R/S (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki DR 650R/S motorcycle was made in 1994 and has an air/oil cooled, four-stroke, single-cylinder engine with a capacity of 640 cc. It has a compression ratio of 9.7:1 and an induction of 40 mm flat side BST40 Mikuni. The bike produces a max power of 32.8 kW/45 hp and a max torque of 57 Nm/5.1 kgf-m/42.0 lb-ft. The transmission is five-speed and the final drive is chain. The front suspension is telescopic fork, coil spring, air/oil damped and the rear suspension is full floater swingarm, single shock, gas/oil damped. The front brakes are a single 280 mm disc with 2 piston calipers and the rear brakes are a single 230 mm disc with 2 piston calipers. The bike has a top speed of 165.8 km/h/103 mph and weighs 166 kg/366 lbs with a fuel capacity of 17 litres/4.5 US gal/3.7 Imp gal. The average consumption is 5.3 L/100 km/19 km/l/44.7 US mpg/53.7 Imp mpg. Braking from 60 km/h-0 takes 14.2 m/46.6 ft and from 100 km/h-0 takes 42.3 m/138.8 ft. It has a standing 1/4 mile of 13.8 seconds/146 km/h/90.7 mph. The bike is 2385 mm/93.9 in long, 870 mm/34.3 in wide, and 1330 mm/52.4 in high. The wheelbase is 1509 mm/59.4 in and the seat height is 890 mm/34.8 in. The rake is 27 degrees and the trail is 74.5 mm/2.9 in.

Technical specifications:

Make Model: Suzuki DR 650R / S

Year: 1994
Engine: Air/oil cooled, four stroke, single cylinder. SOHC, 4 Valve per cylinder.
Capacity: 640 cc / 39 cu in
Bore x Stroke: 95 x 90.4 mm
Compression Ratio: 9.7:1
Cooling System: Air/oil cooled
Induction: 40 mm Flat side BST40 Mikuni
Ignition: Digital
Starting: Kick
Max Power: 32.8 kW / 45 hp @ 6800 rpm (at rear wheel 30.6 kW / 41.1hp @ 6500 rpm )
Max Torque: 57 Nm / 5.1 kgf-m / 42.0 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic fork, coil spring, air/oil damped
Rear Suspension: Full Floater swingarm, single shock, gas/oil damped
Front Brakes: Single 280 mm disc, 2 piston caliper
Rear Brakes: Single 230 mm disc, 2 piston calipers
Front Tyre: 90/90-21
Rear Tyre: 120/90-17
Rake: 27 degrees
Trail: 74.5 mm / 2.9 in
Dimensions: Length: 2385 mm / 93.9 in Width: 870 mm / 34.3 in Height: 1330 mm / 52.4 in
Wheelbase: 1509 mm / 59.4 in
Seat Height: 890 mm / 34.8 in
Wet Weight: 166 kg / 366 lbs
Fuel Capacity: 17 Litres / 4.5 US gal / 3.7 Imp gal
Consumption average: 5.3 L/100 km / 19 km/l / 44.7 US mpg / 53.7 Imp mpg
Braking 60 km/h – 0: 14.2 m / 46.6 ft
Braking 100 km/h – 0: 42.3 m / 138.8 ft
Standing 1/4 Mile: 13.8 sec / 146 km/h / 90.7 mph
Top Speed: 165.8 km/h / 103 mph

The post Suzuki DR 650 R/S (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GSX-R 750SP (1994) https://motorcyclespecifications.com/suzuki-gsx-r-750sp-1994-specs/ Wed, 05 Apr 2023 15:57:16 +0000 https://motorcyclespecifications.com/?p=45842 The Suzuki GSX-R 750SP (1994) is a four-stroke, transverse four-cylinder, DOHC, 4-valve-per-cylinder motorcycle with a 749cc capacity and a compression ratio of 11.8:1. It has a liquid cooling system, and

The post Suzuki GSX-R 750SP (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GSX-R 750SP (1994) is a four-stroke, transverse four-cylinder, DOHC, 4-valve-per-cylinder motorcycle with a 749cc capacity and a compression ratio of 11.8:1. It has a liquid cooling system, and the engine oil is synthetic, 10W/40. The exhaust system is 4-into-2-into-1 stainless steel, and the lubrication is wet sump. The bike has four TRM40 carburetors for induction, computer-controlled electronic ignition for ignition, and an 8 amp/hour battery for starting. It boasts a maximum power of 83.5 kW/112 hp at 10500 rpm and a maximum torque of 75 Nm/7.6 kgf-m/55.3 ft-lb at 1000 rpm.

The Suzuki GSX-R 750SP (1994) has a six-speed constant mesh transmission with a final drive of #530 chain, O-ring sealed, 108 links. The frame is a 5-sided aluminum pipe frame with a sand-casted steering head section and a cast swing arm pivot. The front suspension has Showa 43 mm cartridge-style upside-down forks that are preload, compression, and rebound adjustable, while the rear suspension is full floater and also has preload, compression, and rebound adjustability. The front brakes are 2 x 310 mm discs with 6-piston Nissin calipers, and the rear brake is a single 280 mm disc with a 2-piston Nissin caliper.

The bike’s wheels are three-spoke alloy wheels with a front rim of 3.5 x 17 and a front tire of 120/70 ZR17. The rear rim is 5.5 x 17, and the rear tire is 180/55 ZR17. The rake is 24.5 degrees, the trail is 94 mm/3.7 in., and the wheelbase is 1440 mm/56.7 in. The length is 2095 mm/82.5 in., the width is 730 mm/28.7 in., and the height is 1135 mm/44.7 in. The seat height is 795 mm/31.3. The dry weight of the bike is 199 kg/438.6 lbs, and the wet weight is 229.5 kg/506 lbs. The fuel capacity is 21 liters/5.5 US gal/4.6 Imp gal, and the average consumption is 6.3 l/100 km/15.8 km/l/37.2 US mpg/44.8 Imp mpg.

The bike’s braking performance is impressive, with a 100kmh-0/60 mph-0 braking distance of 36.7 m/120.4 ft and a 60 kmh-0/37 mph-0 braking distance of 12.9 m/42.3 ft. It can go from a standing start to a quarter-mile in 11.16 seconds at 199 km/h/124 mph and has a top speed of 246 km/h/153 mph.

Technical specifications:

Make Model: Suzuki GSX-R 750WR SP

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 749 c / 45.7 cub. in.
Bore x Stroke: 70 x 48.7 mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Engine Oil: Synthetic,10W/40
Exhaust System: 4-into-2-into-1 Stainless-steel exhaust
Lubrication: Wet sump
Induction: 4 x TRM40 carburetors
Ignition: Computer controlled electronic ignition
Spark Plug: NGK, CR9EK
Battery: 8 Amp/hour
Starting: Electric
Max Power: 83.5 kW / 112 hp @ 10500 rpm
Max Torque: 75 Nm / 7.6 kgf-m / 55.3 ft-lb @ 1000 rpm
Clutch: Cable operated, wet multiple, coil spring
Transmission: 6 Speed, constant mesh
Final Drive: #530 Chain, O-ring sealed, 108 links
Gear Ratios: 1st 2.87 / 2nd 2.06 / 3rd 1.65 / 4th 1.43 / 5th 1.26 / 6th 1.12:1
Frame: 5-sided aluminium pipe frame with sand-casted steering head section and cast swing arm pivot
Front Suspension: Showa 43 mm cartridge style upside-down forks, preload, compression and rebound adjustable
Front Wheel Travel: 120 mm / 4.7 in.
Rear Suspension: Full floater, preload, compression and rebound adjustable
Front Brakes: 2 x 310 mm Discs, 6 piston Nissin calipers
Rear Brakes: Single 280 mm disc, 2 piston Nissin caliper
Wheels: Alloy, 3 spoke
Front Rim: 3.5 x 17
Front Tyre: 120/70 ZR17
Rear Rim: 5.5 x 17
Rear Tyre: 180/55 ZR17
Rake: 24.5 degrees
Trail: 94 mm / 3.7 in.
Wheelbase: 1440 mm / 56.7 in.
Dimensions: Length 2095 mm / 82.5 in. Width 730 mm / 28.7 in. Height 1135 mm / 44.7 in.
Seat Height: 795 mm / 31.3
Dry Weight: 199 kg / 438.6 lbs
Wet Weight: 229.5 kg / 506 lbs.
Fuel Capacity: 21 Litres / 5.5 US gal / 4.6 Imp gal
Average Consumption: 6.3 l/100 km / 15.8 km/l / 37.2 US mpg / 44.8 Imp mpg
Braking 100kmh – 0 / 60 mph – 0: 36.7 m / 120.4 ft
Braking 60 kmh – 0 / 37 mph – 0: 12.9 m / 42.3 ft
Standing 1/4 mile: 11.16 sec / 199 km/h / 124 mph
Top Speed: 246 km/h / 153 mph

The post Suzuki GSX-R 750SP (1994) appeared first on MotorcycleSpecifications.com.

]]> Kawasaki ZR (1994) https://motorcyclespecifications.com/kawasaki-zr-1994-specs/ Wed, 05 Apr 2023 06:15:04 +0000 https://motorcyclespecifications.com/?p=45307 The Kawasaki ZR-X 400 Lawson Replica is a motorcycle produced in 1994. Its engine is a four-stroke parallel twin-cylinder that utilizes a DOHC with two valves per cylinder. The capacity

The post Kawasaki ZR (1994) appeared first on MotorcycleSpecifications.com.

]]> The Kawasaki ZR-X 400 Lawson Replica is a motorcycle produced in 1994. Its engine is a four-stroke parallel twin-cylinder that utilizes a DOHC with two valves per cylinder. The capacity of this motorcycle is 399 cc. The bore by stroke of this bike is 57.5 by 38.5 mm. It is a liquid-cooled bike with a compression ratio of 11.2:1. The Kawasaki ZR-X 400 Lawson Replica uses the 4x Keihin CVK30 carburetors and an electric starting system. It has a maximum power of 62 hp at 11500 rpm and a maximum torque of 37 Nm at 9000 rpm. The clutch is wet multi-disc with a 6-speed transmission system. It also has a chain final drive. The 39mm RWU telescopic forks are included in the front suspension while the rear suspension utilizes dual shocks preload adjustment. The front brakes use 2x 298mm discs and 6 piston calipers while the rear brakes use a single 240mm disc and 2 piston caliper. The front tire is 110/80-17 while the rear tire is 150/70-18. It has a wheelbase of 1450 mm, seat height of 780 mm, and a ground clearance of 120 mm. This motorcycle has a dry weight of 186 kg and can hold up to 16 liters of fuel.

Technical specifications:

Make Model: Kawasaki ZR-X 400 Lawson Replica

Year: 1994
Engine: Four stroke parallel twin cylinder. DOHC, 2 valves per cylinder
Capacity: 399 cc / 24.4 cu-in
Bore x Stroke: 57.5 38.5 mm
Cooling System: Liquid cooled
Compression Ratio: 11.2:1
Induction: 4x Keihin CVK30 carburetors
Ignition: Battery & coil
Starting: Electric
Max Power: 62 hp / 46.2 kW @ 11500 rpm
Max Torque: 37 Nm / 27.3 lb-ft @ 9000 rpm
Clutch: Wet multi disc
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 39mm RWU telescopic forks
Rear Suspension: Dual shocks preload adjustment
Front Brakes: 2x 298mm discs 6 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 110/80-17
Rear Tyre: 150/70-18
Wheelbase: 1450 mm / 57.1 in
Seat Height: 780 mm / 30.7 in
Ground Clearance: 120 mm / 4.7 in
Dry Weight: 186 kg / 410.1 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Kawasaki ZR (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GSF400 P (1994) https://motorcyclespecifications.com/suzuki-gsf400-p-1994-specs/ Tue, 04 Apr 2023 19:21:03 +0000 https://motorcyclespecifications.com/?p=44705 The Suzuki GSF 400P is a 1994 motorcycle equipped with a four-stroke, transverse four-cylinder, DOHC, and four valves per cylinder engine. It has a capacity of 398cc with a compression

The post Suzuki GSF400 P (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GSF 400P is a 1994 motorcycle equipped with a four-stroke, transverse four-cylinder, DOHC, and four valves per cylinder engine. It has a capacity of 398cc with a compression ratio of 11.8:1 and is liquid-cooled. The motorcycle uses four Mikuni BST32 carburetors for induction and transistorized ignition with electric starting. The bike generates a max power of 38.8 kW/52 hp at 12000 rpm and a max torque of 35.2 Nm / 3.6 kgf-m / 26 lb-ft at 11000 rpm. It has a six-speed transmission with a chain final drive system. The front suspension is a 41mm Kayaba telescope, coil spring, oil-damped with 120m / 4.7 inches wheel travel, while the rear suspension is a preload adjustable Kayaba monoshock with 120mm / 4.7 inches wheel travel. The motorcycle uses single 310mm disc brakes with two-piston calipers on the front and single 260mm disc brakes with two-piston calipers on the rear. The bike has a 25.5-degree rake, 99.1mm / 3.9 inches trail, and a wheelbase of 1430mm / 56.3 inches. It also has a fuel capacity of 17 litres / 4.4 US gal / 3.6 Imp gal and a consumption average of 5.6 L/100 km / 17.8 km/l / 42 US mpg / 50 Imp mpg. The Suzuki GSF 400P can brake from 60 km/h to 0 in 13.8m / 45.3ft and from 100 km/h to 0 in 37.9m / 124.3ft. It can accelerate from 40 – 60 mph in 5.9 seconds and from 60 – 80 mph in 6.1 seconds, and has a top speed of 177 km/h / 110 mph.

Technical specifications:

Make Model: Suzuki GSF 400P

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 398 cc / 24.3 cu in
Bore x Stroke: 56 40.4 mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Induction: 4 x Mikuni BST32 carburetors
Ignition: Transistorized
Starting: Electric
Max Power: 38.8 kW / 52 hp @ 12000 rpm
Max Torque: 35.2 Nm / 3.6 kgf-m / 26 lb-ft @ 11000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 41mm Kayaba, telescopic, coil spring, oil-damped
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Preload adjustable Kayaba monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 310mm disc, 2 piston caliper
Rear Brakes: Single 260mm disc, 2 piston caliper
Front Tyre: 110/70-17H
Rear Tyre: 150/70-17H
Rake: 25.5 degrees
Trail: 99.1 mm / 3.9 in
Dimensions: Length: 2055 mm / 80.9 in Width: 705 mm / 27.8 in Height: 1060 mm / 41.7 in
Wheelbase: 1430 mm / 56.3 in
Seat Height: 762 mm / 30 in
Dry Weight: 168 kg / 370 lbs
Wet Weight: 189 kg / 418 lbs
GVWR: 406 kg / 895 lbs
Fuel Capacity: 17 Litres / 4.4 US gal / 3.6 Imp gal
Consumption Average: 5.6 L/100 km / 17.8 km/l / 42 US mpg / 50 Imp mpg
Braking 60 km/h – 0: 13.8 m / 45.3 ft
Braking 100 km/h – 0: 37.9 m / 124.3 ft
Standing 1/4 Mile: 13.1 sec / 161 km/h / 100 mph
Acceleration: 40 – 60 mph: 5.9 sec
Acceleration: 60 – 80 mph: 6.1 sec
Top Speed: 177 km/h / 110 mph

The post Suzuki GSF400 P (1994) appeared first on MotorcycleSpecifications.com.

]]> Cagiva Mito 125 II Koncinski Replica (1994) https://motorcyclespecifications.com/cagiva-mito-125-ii-koncinski-replica-1994-specs/ Tue, 04 Apr 2023 14:42:04 +0000 https://motorcyclespecifications.com/?p=44445 The Cagiva Mito 125 II Koncinski Replica is a 125.6 cc motorcycle released in 1994. It has a two-stroke, single-cylinder engine with a 13.0:1 compression ratio and 28mm Dell’Orto flat

The post Cagiva Mito 125 II Koncinski Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> The Cagiva Mito 125 II Koncinski Replica is a 125.6 cc motorcycle released in 1994. It has a two-stroke, single-cylinder engine with a 13.0:1 compression ratio and 28mm Dell’Orto flat slide carburetor. It can produce a max power of 33.5 hp at 10500 rpm and a max torque of 19 Nm at 9000 rpm. The bike has a 7-speed transmission and chain final drive, with USD telescopic forks and a swinging arm single shock rear suspension. Braking is done with a single 320mm disc 4-piston caliper on the front and a single 230mm disc 1-piston caliper on the rear. The bike has a dry weight of 117 kg and a fuel capacity of 12.8 liters. It can reach a top speed of 164.2 km/h and can complete the standing 1/4 mile in 14.0 seconds at 148.9 km/h. The bike has a stylish design and is a popular choice among motorcycle enthusiasts.

Technical specifications:

Make Model: Cagiva Mito 125 II Koncinski Replica

Year: 1994
Engine: Two stroke, single cylinder, electric variable power read valve
Capacity: 125.6 cc / 7.6 cu-in
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 13.0:1
Induction: 28mm Dell’Orto flat slide carburetor
Ignition: CDI
Starting: Kick
Max Power: 33.5 hp / 23 kW @ 10500 rpm
Max Torque: 19 Nm / 14 lb-ft @ 9000 rpm
Transmission: 7 Speed
Final Drive: Chain
Front Suspension: USD Telescopic forks
Rear Suspension: Swinging arm single shock
Front Brakes: Single 320mm disc 4 piston caliper
Rear Brakes: Single 230mm disc 1 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/70-17
Dry Weight: 117 kg / 258 lbs
Wet weight: 125 kg / 275.5 lbs
Fuel Capacity: 12.8 Litres / 3.38 US gal
Braking 60 – 0 / 100 – 0: 13.1 m / 37.0 m
Standing 1/4 Mile: 14.0 sec / 148.9 km/h
Top Speed: 164.2 km/h

The post Cagiva Mito 125 II Koncinski Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda CBR900RR Fireblade (1994) https://motorcyclespecifications.com/honda-cbr900rr-fireblade-1994-specs/ Tue, 04 Apr 2023 01:41:10 +0000 https://motorcyclespecifications.com/?p=43723 The Honda CBR900RR Fireblade, released in 1994, is a powerful motorcycle with a four-stroke, transverse four-cylinder, DOHC engine with 893 cc/54.5 cub.in capacity. It has liquid cooling, wet sump lubrication,

The post Honda CBR900RR Fireblade (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda CBR900RR Fireblade, released in 1994, is a powerful motorcycle with a four-stroke, transverse four-cylinder, DOHC engine with 893 cc/54.5 cub.in capacity. It has liquid cooling, wet sump lubrication, and a 4 into 2 into 1 exhaust system. The bike is equipped with 4 x 38 mm Keihin CV carbs and an electronically-triggered ignition system. It has a six-speed transmission with a wet, multiple discs, cable-operated clutch. The all-aluminum twin-spar frame has a heavily braced aluminum swingarm. The front suspension system is a 45mm Showa cartridge with adjustable spring preload and rebound damping, while the rear suspension is a Pro-Link with one Showa damper and wheel travel, also adjustable for spring preload, rebound damping, and compression damping. The front brakes consist of 2x 296mm discs, while the rear brake is a single 220mm disc. The bike has a top speed of 264 km/h or 164 mph and comes in three color schemes: Yellow/White/Black, Blue/Red/White, and Urban Tiger. The 1994 Fireblade has a specific space under the seat for a U-lock. Overall, the bike is a powerful and reliable option that is still popular among motorcycle enthusiasts.

Technical specifications:

Make Model: Honda CBR 900RR Fireblade

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 893 cc / 54.5 cub. in
Bore x Stroke: 70 x 58 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooling
Lubrication: Wet sump
Exhaust: 4 into 2 into 1
Induction: 4 x 38 mm Keihin CV carbs
Ignition: Electronically triggered
Starting: Electric
Clutch: Wet, multiple discs, cable operated
Max Power: 89.7 kW / 122 hp @ 10500rpm
Max Power Rear Wheel: 86.0 kW / 116.9 hp @ 10500rpm
Max Torque: 88 Nm / 9.0 kg fm / 64.9 lb.ft @ 10000rpm
Transmission: 6 Speed
Final Drive: Chain, 108 links
Gear Ratio: 1st 2.77 / 2nd 2.00 / 3rd 1.58 / 4th 1.40 / 5th 1.25 / 6th 1.17:1
Frame: All-aluminum twin-spar frame with a heavily braced aluminum swingarm
Front Suspension: 45mm Showa cartridge, adjustments for spring preload, rebound damping adjustable
Front Wheel Travel: 120 mm / 4.7 in.
Rear Suspension: Pro-Link, one Showa damper, wheel travel, adjustments for spring, preload, rebound damping, compression damping
Rear Wheel Travel: 120 mm / 4.7 in.
Front Brakes: 2x 296 mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 130/70 ZR16
Rear Tyre: 180/55 ZR17
Wheelbase: 1405 mm / 55.3 in.
Rake: 24 degrees
Trail: 89 mm / 3.5 in.
Dimensions: Length 2055 mm / 80.9 in Width 685 mm / 27.0 in Height 1110 mm / 43.7 in
Wheelbase: 1405 mm / 55.3in
Seat Height: 810 mm / 31.9 in.
Dry Weight: 185 kg / 408 lbs
Wet Weight: 206 kg / 454 lb
Fuel Capacity: 18 Litres / 4.8 US gal
Braking 60 km/h / 37 mph – 0: 12.1 m / 39.7 ft.
Braking 100 km/h / 62 mph – 0: 36 m / 118 ft.
Average Consumption: 6.4 l/100 km / 15.5 km/l / 36.5 mpg
Standing 1/4 mile: 10.3 sec / 211.5 km/h / 131.4 mph
Top Speed: 264 km/h / 164 mph
Colours: Yellow/White/Black, Blue/Red/White,
Road Tests: Motosprint 1994 Tuttomoto 1994
Overview: Compression adjustment was added to the forks in a minor update that also saw the twin round headlights replaced with the foxeye units. cPower output on early Blades varied from 106bhp to 124bhp. c1994 saw the unveiling of the Urban Tiger paint scheme. c Honda made a specific spac efor a U-lock under the 1994 FireBlade s seat.

The post Honda CBR900RR Fireblade (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki VS 400 Intruder (1994) https://motorcyclespecifications.com/suzuki-vs-400-intruder-1994-specs/ Tue, 04 Apr 2023 00:22:53 +0000 https://motorcyclespecifications.com/?p=43651 The Suzuki VS 400 Intruder is a motorcycle that was manufactured in 1994. It has a four-stroke, 45-degree V-twin engine, liquid cooling, and electronic fuel injection. The engine has a

The post Suzuki VS 400 Intruder (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki VS 400 Intruder is a motorcycle that was manufactured in 1994. It has a four-stroke, 45-degree V-twin engine, liquid cooling, and electronic fuel injection. The engine has a capacity of 399cc and 4 valves per cylinder. The motorcycle has a maximum power of 24.6 kW at 7500 rpm and maximum torque of 33 Nm at 6000 rpm. The transmission is 5-speed and the final drive is a chain. The front suspension is a telescopic fork with oil damping while the rear suspension is dual shocks with coil springs and oil damping. The front and rear brakes are both single discs. The motorcycle has a seat height of 701 mm and a wet weight of 200 kg. The fuel capacity is 15.1 L.

Technical specifications:

Make Model: Suzuki VS 400 Intruder

Year: 1994
Engine: Four stroke, 45o V-twin, SOHC, 4 valves per cylinder
Capacity: 399 cc / 24.3 cu in
Cooling System: Luquid cooled
Induction: Electronic fuel injection
Starting: Electric
Max Power: 24.6 kW / 33 hp @ 7500 rpm
Max Torque: 33 Nm / 3.36 kgf-m / 24 lb-ft @ 6000 rpm
Transmission: 5-Speed
Final Drive: Chain
Front Suspension: Telescopic fork, oil damped
Rear Suspension: Dual shocks, coil springs, oil damed
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 130/90-16
Rear Tyre: 170/80-15
Dimensions: Lenght: 2205 mm / 86.8 in Width: 770 mm / 30.3 in Height: 1130 mm / 44.5 in
Wheelbase: 1560 mm / 61.4 in
Seat Height: 701 mm / 27.6 in
Wet Weight: 200 kg / 440 lbs
Fuel Capacity: 15.1 L / 4.0 US gal / 3.3 Imp gal

The post Suzuki VS 400 Intruder (1994) appeared first on MotorcycleSpecifications.com.

]]> BMW R1100GS (1994) https://motorcyclespecifications.com/bmw-r1100gs-1994-specs/ Mon, 03 Apr 2023 23:48:59 +0000 https://motorcyclespecifications.com/?p=43621 The BMW R 1100GS is a motorcycle that was produced in 1994. It has a four-stroke, two-cylinder horizontally opposed Boxer engine with 4 valves per cylinder and a capacity of

The post BMW R1100GS (1994) appeared first on MotorcycleSpecifications.com.

]]> The BMW R 1100GS is a motorcycle that was produced in 1994. It has a four-stroke, two-cylinder horizontally opposed Boxer engine with 4 valves per cylinder and a capacity of 1084cc. The compression ratio is 10.3:1, and it is air/oil-cooled. The ignition is electronic and MA 2.2 controlled by Bosch Motronic. The clutch is a 180mm dry single plate with diaphragm spring, and the transmission is a 5-speed. The final drive is shaft final drive with a ratio of 3.0:1 (33:11). The frame is a three-piece design with load-bearing engine sections. The front suspension is a BMW Telelever with a single gas-filled shock absorber and progressive coil spring. The rear suspension is a BMW Paralever with a single-sided swinging arm, a gas-filled shock absorber with a coil spring, and rebound damping. The front brakes are 2 x 297mm discs with 3 piston calipers, while the rear brake is a single 250mm disc with a 3 piston caliper. The wheels are patented cross-spoke design with a front tire size of 110/80 R19 and rear tire size of 150/70 R17. The motorcycle has a fuel capacity of 24 liters and has an average fuel consumption of 6.1 L/100km. It has a top speed of 201.6 km/h and can go from 0-100 km/h in 4.5 seconds. The BMW R 1100GS has been documented in manuals and tech info available online.

Technical specifications:

Make Model: BMW R 1100GS

Year: 1994
Engine: Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder
Capacity: 1084 cc / 66.1 cu in
Bore x Stroke: 99 x 70.5 mm
Cooling System: Air/oil-cooled
Compression Ratio: 10.3:1
Lubrication: Wet sump
Induction: Bosch Motronic 2.2 with fuel cutoff when coasting
Ignition: Electronic MA 2.2 controlled by Bosch Motronic
Battery: 12V, 19 Amp
Alternator: 700W
Charging System: 14 V, 50 Amp
Headlamp: Single H4 55/60W quartz bulb
Spark Plug: Bosch, FR5 DTC
Starting: Electric
Max Power: 59 kW / 80 hp @ 6750 rpm
Max Power Rear Tyre: 55.4 kW / 74.3 hp @ 6600 rpm
Max Torque: 97Nm / 9.9 kgf-m / 71 lb-ft / @ 5250 rpm
Clutch: 180mm Dry single plate with diaphram spring
Transmission: 5 Speed
Final Drive: Shaft
Final Drive Ratio: 3.0:1 (33:11)
Gear Ratio: 1st 4.16 / 2nd 2.91 / 3rd 2.13 / 4th 1.74 / 5th 1.45
Frame: Three piece (front and rear sections with load-bearing engine)
Front Suspension: BMW Telelever Single gas-filled shock absorber with progressive coil spring, Preload adjustment (five steps)
Front Wheel ravel: 190 mm / 7.5 in
Rear Suspension: BMW Paralever (single-sided swinging arm) Single gas-filled shock absorber with coil spring, Preload adjustment (continuously adjustable by handwheel), Rebound damping (continuously adjustable by screw)
Rear Wheel Travel: 200 mm / 7.9 in
Front Brakes: 2 x 297mm Discs, 3 piston calipers
Rear Brakes: Single 250mm disc, 3 piston caliper
Front Tyre: 110/80 R19
Front Wheel: 2.5 x 19 inch patented cross spoke
Rear Tyre: 150/70 R17
Front Wheel: 4 x 17 inch patented cross spoke
Dimensions: Length 2189 mm / 85.4 in Width 920 mm / 35.9 in Height 1366 mm / 53.7 in
Wheelbase: 1509 mm / 59.4 in
Seat Height: 840 mm / 33.0 in – 860 mm / 33.8 in
Dry Weight: 225 kg / 496.0 lbs
Wet Weight: 240 kg / 549 lbs
Ground Clearance: 200 mm / 7.8 in
Fuel Capacity: 24 Liters / US 6.3 gal
Consumption Average: 6.1 L/100 km / 16.4 km/l / 35.6 US mpg
Braking 60 km/h – 0: 14.0 m / 46 ft
Braking 100 km/h – 0: 40.5 m / 133 ft
Standing 1/4 Mile: 12.5 sec / 168.2 km/h /104.5 mph
Top Speed: 201.6 km/h / 125.3 mph
Manual & Tech info: BMWgsclub.nl / Blackbears.ru / Epll.no-ip.com / Wendell Duncan’s R1100GS microfiches

The post BMW R1100GS (1994) appeared first on MotorcycleSpecifications.com.

]]> Aprilia RS 125 Extrema Sprots Pro Chesterfied Replica (1994) https://motorcyclespecifications.com/aprilia-rs-125-extrema-sprots-pro-chesterfied-replica-1994-specs/ Mon, 03 Apr 2023 14:49:06 +0000 https://motorcyclespecifications.com/?p=43119 An Aprilia RS 125SP Sports Pro Chesterfield Replica motorcycle made in 1994 has a single cylinder, two-stroke engine with 125 cc capacity and reed valve induction. It has a compression

The post Aprilia RS 125 Extrema Sprots Pro Chesterfied Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> An Aprilia RS 125SP Sports Pro Chesterfield Replica motorcycle made in 1994 has a single cylinder, two-stroke engine with 125 cc capacity and reed valve induction. It has a compression ratio of 14.5:1 and liquid cooling, as well as Dell’Orto VHSB 34LD induction and electronic ignition. The bike has a maximum power of 24.8 kW and 34 hp at 11000 rpm and a maximum torque of 25 Nm, 2.5 kgf-m or 18.4 lb-ft at 9000 rpm. It has a 6-speed transmission and final drive chain. The bike has upside-down forks, 40mm front suspension and a monoshock rear suspension with 120mm (4.7in) of front and rear wheel travel. The bike has single 320mm discs, 4 piston caliper front brakes and a single 240mm disc with 2 piston caliper rear brakes. The bike has a 110/70-17 front tyre and 150/60-17 rear tyre with a dry weight of 115 kg or 254 lbs.

Technical specifications:

Make Model: Aprilia RS 125SP Sports Pro Chesterfield Replica

Year: 1994
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: Dell’Orto VHSB 34LD
Ignition: Electronic
Starting: Electric
Max Power: 24.8 kW / 34 hp @ 11000 rpm
Max Torque: 25 Nm / 2.5 kgf-m / 18.4 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Dry Weight: 115 kg / 254 lbs

The post Aprilia RS 125 Extrema Sprots Pro Chesterfied Replica (1994) appeared first on MotorcycleSpecifications.com.

]]> Bimota BB1 Supermono (1994) https://motorcyclespecifications.com/bimota-bb1-supermono-1994-specs/ Mon, 03 Apr 2023 14:17:01 +0000 https://motorcyclespecifications.com/?p=43090 The Bimota BB1 Supermono was a motorcycle model released in 1994. It had a four-stroke, single-cylinder engine with four valves per cylinder and a capacity of 652 cc. The bore

The post Bimota BB1 Supermono (1994) appeared first on MotorcycleSpecifications.com.

]]> The Bimota BB1 Supermono was a motorcycle model released in 1994. It had a four-stroke, single-cylinder engine with four valves per cylinder and a capacity of 652 cc. The bore and stroke were 100 x 83 mm, and the compression ratio was 9.5:1. It had a liquid cooling system and used 2x 33mm Mikuni BST carbs for induction. The ignition was digital electronic, and it had electric starting.

The maximum power it could generate was 35.8 Kw or 48 hp at 6500 rpm, and the maximum torque was 57.9 Nm or 42.7 lb-ft at 6000 rpm. The transmission was a 5-speed, with a final drive chain. The front suspension had a tele hydraulic fork with 43mm stanchions and rebound adjustments, while the rear suspension had a single shock-absorber with compression, rebound, and length adjustments.

The front brakes had a single 320mm or 12.6 in disc with a 4-piston caliper, and the rear brakes had a single 230mm or 9.1 in disc with a 2-piston caliper. The front and rear tires were 120/70 ZR17 and 160/60 ZR17 respectively. It had a dry weight of 145 kg or 319.7 lbs, and a fuel capacity of 16 liters or 4.2 US gal.

Technical specifications:

Make Model: Bimota BB1 Supermono

Year: 1994
Engine: Four stroke, single cylinder, 4 valves per cylinder
Capacity: 652 cc / 39.8 cub in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.5:1
Cooling System: Liquid cooled
Induction: 2x 33mm Mikuni BST carbs
Ignition: Digital electronic
Starting: Electric
Max Power: 35.8 Kw / 48 hp @ 6500 rpm
Max Torque: 57.9 Nm / 42.7 lb-ft @ 6000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Tele hydraulic fork with 43mm stanchions and rebound adjustments
Rear Suspension: Single shock-absorber with compression, rebound and length adjustments
Front Brakes: Single 320mm / 12.6 in disc 4 piston caliper
Rear Brakes: Single 230mm / 9.1 in disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 160/60 ZR17
Dry Weight: 145 kg / 319.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Bimota BB1 Supermono (1994) appeared first on MotorcycleSpecifications.com.

]]> Buell S2T Thunderbolt (1994) https://motorcyclespecifications.com/buell-s2t-thunderbolt-1994-specs/ Mon, 03 Apr 2023 10:00:05 +0000 https://motorcyclespecifications.com/?p=42849 The Buell S2T Thunderbolt is a motorcycle made in 1994. It has a 1203cc V-Twin engine with a compression ratio of 10.0:1, which produces up to 101 horsepower at 6000

The post Buell S2T Thunderbolt (1994) appeared first on MotorcycleSpecifications.com.

]]> The Buell S2T Thunderbolt is a motorcycle made in 1994. It has a 1203cc V-Twin engine with a compression ratio of 10.0:1, which produces up to 101 horsepower at 6000 rpm and 90 Nm of torque at 5500 rpm. The bike has a five-speed transmission and Kevlar belt final drive. The suspension consists of a Showa fork and single shock absorber with adjustable compression and rebound damping. The bike uses a six-piston caliper for the front brake and a two-piston caliper for the rear brake. Tires are sized 120/70 ZR17 for the front and 170/60 ZR17 for the rear. The motorcycle’s dry weight is 200kg, and its fuel capacity is 20.4L. The bike gets an average fuel consumption of 4.8L/100km, which is equivalent to 49 US mpg. The braking distance from 100km/h to stop is 31.1 meters, and the bike can reach a top speed of 201 km/h or 125 mph. The standing 1/4 mile time is 12.6 seconds with a speed of 167 km/h or 104 mph.

Technical specifications:

Make Model: Buell S2T Thunderbolt

Year: 1994
Engine: 45 degrees V-Twin, four stroke, pushrod actuated overhead valve, hydraulic self-adjusting lifters, 2 valve per cylinder.
Capacity: 1203 cc / 73.4 cu in
Bore x Stroke: 88.8 x 96.8 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Induction: 2 x ~A40 mm Keihin carburetors
Starting: Electric
Max Power: 73.6 kW / 101 hp @ 6000 rpm
Max Torque: 90 Nm / 9.2 kgf-m / 66.4 lb.ft @ 5500 rpm
Transmission: 5 Speed
Final Drive: Kevlar belt
Front Suspension: ~A40 mm Showa fork, adjustable for compression and rebound damping
Front Wheel Travel: 120 mm / 4.7″
Rear Suspension: Single Showa shock, spring preload, compression and preload damping
Rear Wheel Travel: 116 mm / 4.6″
Front Brakes: Single ~A340 mm disc, 6 piston caliper
Rear Brakes: Single ~A230 mm disc, 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Dry Weight: 200 kg / 441 lbs
Wet Weight: 218 kg / 481 lbs
Fuel Capacity: 20.4 L / 5.4 US gal
Consumption average: 4.8 L/100 km / 20.8 km/l / 49 US mpg
Braking 100 km/h – 0: 31.1 m / 102 ft
Standing 1/4 Mile: 12.6 sec / 167 km/h / 104 mph
Top Speed: 201 km/h / 125 mph

The post Buell S2T Thunderbolt (1994) appeared first on MotorcycleSpecifications.com.

]]> Jawa 125 Chopper (1994) https://motorcyclespecifications.com/jawa-125-chopper-1994-specs/ Mon, 03 Apr 2023 08:28:05 +0000 https://motorcyclespecifications.com/?p=42767 The Jawa 125 Chopper is a four stroke, single cylinder motorcycle that was produced in 1994. It has a 124cc capacity engine with a compression ratio of 9.0:1, and is

The post Jawa 125 Chopper (1994) appeared first on MotorcycleSpecifications.com.

]]> The Jawa 125 Chopper is a four stroke, single cylinder motorcycle that was produced in 1994. It has a 124cc capacity engine with a compression ratio of 9.0:1, and is air cooled with electronic ignition. The bike starts with an electric engine and has a maximum power of 9.5 kW / 13 hp at 8700 rpm and a maximum torque of 9.6 Nm / 0.98 kgf-m / 7.1 ft. lbs at 7000 rpm. The bike is equipped with a 5 speed transmission and final chain drive. The front suspension is a hydraulic telescopic fork while the rear suspension includes dual shock absorbers. The bike has a single A265 mm piston caliper front brake and a rear brake with an A160 mm drum. The front wheel measures 3.00-19 while the rear wheel is 3.50-16. The dry weight of the bike is 124 kg / 273 lbs, and it has a fuel capacity of 13.5 L / 3.6 US gal.

Technical specifications:

Make Model: Jawa 125 Chopper

Year: 1994
Engine: Four stroke, single cylinder, 2 valves
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 56.5 x 49.5 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Ignition: Electronic
Starting: Electric
Max Power: 9.5 kW / 13 hp @ 8700 rpm
Max Torque: 9.6 Nm / 0.98 kgf-m / 7.1 ft. lbs @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Dual shock absorbers.
Front Brakes: Single ~A265 mm disc, 1 piston caliper
Rear Brakes: ~A160 mm Drum
Front Wheel: 3.00-19
Rear Wheel: 3.50-16
Dry Weight: 124 kg / 273 lbs
Fuel Capacity: 13.5 L / 3.6 US gal

The post Jawa 125 Chopper (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda RVF400R (1994) https://motorcyclespecifications.com/honda-rvf400r-1994-specs/ Mon, 03 Apr 2023 05:52:13 +0000 https://motorcyclespecifications.com/?p=42621 The Honda RVF400R (NC35) is a motorcycle produced in 1994 with a four-stroke, 90 degree V-four cylinder, DOHC, and four valves per cylinder. It has a capacity of 399cc/24.3 cu-in,

The post Honda RVF400R (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda RVF400R (NC35) is a motorcycle produced in 1994 with a four-stroke, 90 degree V-four cylinder, DOHC, and four valves per cylinder. It has a capacity of 399cc/24.3 cu-in, with a bore and stroke of 55 x 42mm and a compression ratio of 11.3:1. The RVF400R uses a liquid cooling system, a wet sump lubrication, and 4 x 34mm Keihin carbs for induction. Its ignition is a digitalized full transistor system, while its starting method is electric. The RVF 400R has a maximum power of 61 hp/ 45kW @12500rpm and a maximum torque of 35Nm/3.7kgf-m @10000rpm. Its clutch is wet and cable operated, and transmission is 6-speed with a final drive chain. For the frame, the motorcycle uses a twin-spar aluminum frame. The front suspension has 41mm inverted forks with preload and rebound damping, while the rear suspension is a rising-rate monoshock with pre-load and rebound damping. Its front brakes are 2 x 269mm four-piston calipers, with a single-disc 2-piston caliper for the rear. The front tire is 120/60 R17, and the rear tire is 150/60 R17. The RVF400R’s rake stands at 24 degrees, while the trail is at 96 mm/3.7 inches. It has a height of 1075 mm/42.3 in, a length of 1985 mm/78.1 in, a wheelbase of 1345 mm/53 in, and a seat height of 780 mm/30.7 in. The dry weight of RVF 400R is 165 kg/363.8 lbs, with a fuel capacity of 16 liters/ 3.9 gallons. It has an average consumption of 42 mpg, a standing 1/4 mile time of 12.6 seconds and a top speed of 136.2 mph.

Technical specifications:

Make Model: Honda RVF 400R (NC35)

Year: 1994
Engine: Four stroke 90 degreesV-four cylinder, DOHC, 4 valves per cylinder.
Capacity: 399 cc / 24.3 cu-in
Bore x Stroke: 55 x 42 mm
Valve Clearance: Intake – 0.15 mm / Exhaust 0.24
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Wet sump
Engine Oil: SAE 10W-40
Oil Capacity: 2.4 Litres
Induction: 4 x 34mm Keihin Carbs
Ignition: Digitalized full transistor ignition
Spark Plug: NGK ER9EH
Starting: Electric
Max Power: 61 hp / 45 kW @ 12500 rpm
Max Torque: 35 Nm / 3.7 kgf-m @ 10000 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Twin-spar aluminum
Front Suspension: 41mm inverted forks: preload and rebound damping
Fork oil Per Rod: 390 ml / SAE 7,5W
Rear Suspension: Rising-rate monoshock. pre-load and rebound damping
Front Brakes: 2 x 269mm 4 piston calipers
Rear Brakes: Single disc 2 piston caliper
Front Tyre: 120/60 R17
Rear Tyre: 150/60 R17
Rake: 24 degrees
Trail: 96 mm / 3.7 in
Dimensions: Height 1075 mm / 42.3 in Length 1985 mm / 78.1 in
Wheelbase: 1345 mm / 53.0 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 165 kg / 363.8 lbs
Fuel Capacity: 16 Litres / 3.9 gal
Consumption Average: 42 mpg
Standing 1/4 Mile: 12.6 sec / 109 mph
Top Speed: 136.2 mph

The post Honda RVF400R (1994) appeared first on MotorcycleSpecifications.com.

]]> Bimota Tesi ID 904EF (1994) https://motorcyclespecifications.com/bimota-tesi-id-904ef-1994-specs/ Mon, 03 Apr 2023 03:22:13 +0000 https://motorcyclespecifications.com/?p=42483 The Bimota Tesi ID 904EF motorcycle was produced in 1994, with only 25 units made. It features a four-stroke, 90-degree L twin-cylinder engine with desmodromic four valves per cylinder and

The post Bimota Tesi ID 904EF (1994) appeared first on MotorcycleSpecifications.com.

]]> The Bimota Tesi ID 904EF motorcycle was produced in 1994, with only 25 units made. It features a four-stroke, 90-degree L twin-cylinder engine with desmodromic four valves per cylinder and a capacity of 904cc. The engine is liquid-cooled and has Weber fuel injection and electronic ignition, producing a maximum power of 117hp at 9000rpm and max torque of 85.3Nm at 8000rpm. The bike has a six-speed transmission with a chain final drive. The pair of upside-down boomerang-shaped plates that envelop the engine are made of machined aluminum alloy and serve as the frame, while the hinged swing arms are made of anticordal alloy. The front and rear suspension both have Marzocchi single shock stepless preload and 10-way compression and 25-way preload damping adjustment. The front brakes feature two 320mm discs with four-piston calipers, while the rear brake has a single 245mm disc with a one-piston caliper. The front and rear tires measure 120/70-17 and 180/55-17, respectively. The dry weight of the bike is 188kg, and the fuel capacity is 16 liters or 4.2 US gallons.

Technical specifications:

Make Model: Bimota Tesi ID 904EF

Year: 1994
Production: 25 units
Engine: Four stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valves per cylinder
Capacity: 904 cc / 55.2 cub. in.
Bore x Stroke: 92 x 68 mm
Compression Ratio: 10.4:1
Cooling System: Liquid cooled
Induction: Weber fuel injection
Ignition: Electronic
Starting: Electric
Max Power: 85.3 kW / 117 hp @ 9000 rpm
Max Torque: 85.3Nm / 8.7 kgf-m / 62.9 [email protected] 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Pair of upside down boomerang shaped plates that envelope the engine on either side. They are made of aluminium alloy and are machined not cast. The engine, unlike the preceding series, has no load bearing functions. At the far ends of the engine are the hinged swing arms, made of anticordal alloy.
Front Suspension: Swinging arm with Marzocchi single shock stepless preload 10-way compression and 25-way preload damping adjustment
Rear Suspension: Marzocchi single shock stepless preload 10-way compression and 25-way preload damping adjustment
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 1 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 180/55-17
Dry Weight: 188 kg / 414.5 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Bimota Tesi ID 904EF (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda CBR1000F (1994) https://motorcyclespecifications.com/honda-cbr1000f-1994-specs/ Sun, 02 Apr 2023 22:31:04 +0000 https://motorcyclespecifications.com/?p=42225 The Honda CBR1000F is a four stroke, transverse four cylinder motorcycle with a DOHC and 4 valves per cylinder. It has a capacity of 998 cc and a bore x

The post Honda CBR1000F (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda CBR1000F is a four stroke, transverse four cylinder motorcycle with a DOHC and 4 valves per cylinder. It has a capacity of 998 cc and a bore x stroke of 77 x 53.6 mm. The bike is liquid cooled and has a compression ratio of 10.5:1. The induction system is 4x 38mm Keihin carbs and ignition is CDI. The motorcycle has an electric start and its maximum power is 132 hp / 96.2 kW @ 9500 rpm with a maximum torque of 104 Nm / 76.7 lb-ft @ 8500 rpm. The clutch is wet with multiple discs that are cable operated and it has a 6-speed transmission. The frame is made of steel and has a single cradle frame. The front suspension is a telescopic air-assisted and ant-dive while the rear suspension is a Pro-link monoshock with 6-way preload and 3-way rebound damping adjust. Front brakes consist of 2x 296mm discs with 2 piston calipers and the rear brake is a single 276mm disc with a 2 piston caliper. The bike has a rake of 27 degrees, trail of 110 mm / 4.3 in and a wheelbase of 1500 mm / 59.0 in. The seat height is 780 mm / 30.7 in and its dry weight is 232 kg / 511.5 lbs. The Honda CBR1000F has a fuel capacity of 21 Litres / 5.5 gal with an average consumption of 15.6 km/lit. Braking 60 – 0 / 100 – 0 is 13.0 m / 35.6 m and standing quarter mile is 10.7 sec / 206 km/h. The top speed of the bike is 264.2 km/h.

Technical specifications:

Make Model: Honda CBR 1000F

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 77 x 53.6 mm
Cooling System: Liquid cooled,
Compression Ratio: 10.5:1
Induction: 4x 38mm Keihin carbs.
Ignition: CDI
Starting: Electric
Max Power: 132 hp / 96.2 kW @ 9500 rpm
Max Torque: 104 Nm / 76.7 lb-ft @ 8500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, Single cradle frame
Front Suspension: Telescopic air assisted and ant-dive.
Rear Suspension: Pro-link monoshock. 6-way preload. 3-way rebound damping adjust
Front Brakes: 2x 296mm discs 2 piston calipers
Rear Brakes: Single 276mm disc 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 170/60-17
Rake: 27 degrees
Trail: 110 mm / 4.3 in
Wheelbase: 1500 mm / 59.0 in
Seat Height: 780 mm / 30.7 in
Dry Weight: 232 kg / 511.5 lbs
Fuel Capacity: 21 Litres / 5.5 gal
Consumption Average: 15.6 km/lit
Braking 60 – 0 / 100 – 0: 13.0 m / 35.6 m
Standing 1/4 Mile: 10.7 sec / 206 km/h
Top Speed: 264.2 km/h

The post Honda CBR1000F (1994) appeared first on MotorcycleSpecifications.com.

]]> Yamaha XV535 Virago (1994) https://motorcyclespecifications.com/yamaha-xv535-virago-1994-specs/ Sun, 02 Apr 2023 16:44:01 +0000 https://motorcyclespecifications.com/?p=41897 The Yamaha XV535 Virago SE was a motorcycle model released in 1994. It features a four-stroke, 70-degree V-twin cylinder engine with a capacity of 535cc and a compression ratio of

The post Yamaha XV535 Virago (1994) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha XV535 Virago SE was a motorcycle model released in 1994. It features a four-stroke, 70-degree V-twin cylinder engine with a capacity of 535cc and a compression ratio of 9.0:1. The bike is air-cooled and has a maximum power of 44 horsepower at 7500 rpm and a max torque of 43 Nm/31 lb-ft at 6000 rpm. It has a five-speed constant mesh transmission and shaft final drive. The front suspension is telescopic forks, and the rear suspension is twin shock variable preload. The front brakes feature single 298mm discs and 2 piston caliper, while the rear brakes are drums. The bike has a rake of 31.5 degrees, a trail of 125mm/4.9in, and a wheelbase of 1511mm/59.4in. The seat height is 700mm/27.5in, and the ground clearance is 145mm/5.7in. The dry weight of the bike is 182kg/401lbs, and the wet weight is 190kg/418lbs. It has a fuel capacity of 13.5 litres/3.5 US gal and a consumption average of 17.6 km/lit. The bike can go from 0 to 60 in 14.1m and stop from 100 at 40.0m. The top speed is 159.8 km/h.

Technical specifications:

Make Model: Yamaha XV 535 Virago S.E.

Year: 1994
Engine: Four stroke, 70 degreesV-Twin cylinder, SOHC, 2 valves per cylinder.
Capacity: 535 cc / 32.6 cu-in
Bore x Stroke: 76 x 59 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x BDS34 Mikuni carburetor
Ignition: Transistorized
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 7500 rpm
Max Power Rear Tyre: 38.9 hp @ 7400 rpm
Max Torque: 43 Nm / 31 lb-ft @ 6000 rpm
Clutch: Wet multi-plate, cable operated
Transmission: 5 speed constant mesh
Final Drive: shaft
Front Suspension: Telescopic forks
Rear Suspension: Twin shock variable preload
Front Brakes: Single 298mm discs 2 piston caliper
Rear Brakes: Drum
Front Tyre: 3.00 S19
Rear Tyre: 140/90-15
Rake: 31.5 degrees
Trail: 125 mm / 4.9 in
Wheelbase: 1511 mm / 59.4 in
Seat Height: 700 mm / 27.5 in
Ground Clearance: 145 mm / 5.7 in
Dry Weight: 182 kg / 401 lbs
Wet Weight: 190 kg / 418 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal
Consumption Average: 17.6 km/lit
Braking 60 – 0 / 100 – 0: 14.1 m / 40.0 m
Standing 1/4 Mile: 14.2 sec / 141.2 km/h
Top Speed: 159.8 km/h

The post Yamaha XV535 Virago (1994) appeared first on MotorcycleSpecifications.com.

]]> Magni Australia (1994) https://motorcyclespecifications.com/magni-australia-1994-specs/ Sun, 02 Apr 2023 16:10:02 +0000 https://motorcyclespecifications.com/?p=41866 The Magni Australia 1994 motorcycle is a four-stroke, 90 degree transverse V-twin with a capacity of 992cc. It has a compression ratio of 10.0:1 and uses Weber-Marelli EFI induction and

The post Magni Australia (1994) appeared first on MotorcycleSpecifications.com.

]]> The Magni Australia 1994 motorcycle is a four-stroke, 90 degree transverse V-twin with a capacity of 992cc. It has a compression ratio of 10.0:1 and uses Weber-Marelli EFI induction and electronic injection ignition. The motorcycle is capable of producing a maximum power of 75 kW/102 hp at 8400 rpm and a maximum torque of 88 Nm/65 lb-ft at 6600 rpm.

The transmission system offers 5 speeds, and the motorcycle is equipped with an FI Up-side-down fully adjustable front suspension and a WP Parallelogrammo rear suspension. It features a front brake consisting of two 320mm discs and a rear brake with a single 230mm disc. The motorcycle’s front and rear tyres have dimensions of 120/70-VR17 and 180/55-VR17, respectively.

The Magni Australia 1994 motorcycle weighs 200 kg/441 lbs and has a fuel capacity of 23 litres/6.0 US gal.

Technical specifications:

Make Model: Magni Australia

Year: 1994
Engine: Four stroke, 90 degreestransverse V-twin, OHC, 4 valves per cylinder
Capacity: 992 cc / 60.5 cu-in
Bore x Stroke: 90 x 78 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: Weber-Marelli EFI
Ignition: Electronic injection
Max Power: 75 kW / 102 hp @ 8400 rpm
Max Torque: 88 Nm / 65 lb-ft @ 6600 rpm
Transmission: 5 Speed
Front Suspension: FI Upside-down fully adjustable
Rear Suspension: WP Parallelogrammo
Front Brakes: 2x 320mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 120/70-VR17
Rear Tyre: 180/55-VR17
Dry Weight: 200 kg / 441 lbs
Fuel Capacity: 23 Litres / 6.0 US gal

The post Magni Australia (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda VF750F 1994 (1994) https://motorcyclespecifications.com/honda-vf750f-1994-1994-specs/ Sun, 02 Apr 2023 15:24:02 +0000 https://motorcyclespecifications.com/?p=41822 The Honda VFR 750F-RJ is a 1994 model motorcycle with a four-stroke, 90 degree V-four cylinder engine, DOHC, and four valve per cylinder. The engine has a capacity of 748

The post Honda VF750F 1994 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda VFR 750F-RJ is a 1994 model motorcycle with a four-stroke, 90 degree V-four cylinder engine, DOHC, and four valve per cylinder. The engine has a capacity of 748 cc and a compression ratio of 11.0:1. The motorcycle features a liquid cooling system and a wet sump lubrication system. It has an induction of 4x36mm Keihin CV and a digitalized full transistor ignition. The motorcycle has a maximum power of 76.6 kW/105 hp at 10000 rpm and a maximum torque of 72.6 Nm/7.4 kgf-m/53.5 ft-lbs at 8000 rpm. It has a wet weight of 226 kg/498 lbs and a fuel capacity of 21 litres/5.5 gal. It has a consumption average of 6.3 L/100 km/15.8 km/l/37.2 US mpg. The motorcycle features a twin spar Aluminum frame, front suspension of 41mm telescopic forks with no external adjustment, and a pro-link single-sided swing arm rear suspension with adjustable preload. It has a front and rear brake system of 2×296 mm discs and 2 piston calipers for the front, and a single 256 mm disc with 2 piston caliper for the rear. The motorcycle has a top speed of 232.7 km/h/144.6 mph and can go from 0 to 100 km/h in 11.3 seconds.

Technical specifications:

Make Model: Honda VFR 750F-RJ

Year: 1994
Engine: Four stroke, 90 degreesV-four cylinder, DOHC, 4 valve per cylinder
Capacity: 748 cc / 45.6 cub in
Bore x Stroke: 70 x 48.6 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: 4x 36mm Keihin CV
Ignition: Digitalized full transistor ignition
Spark Plug: NGK CR8EH9 or ND U24FER9
Starting: Electric
Max Power: 76.6 kW / 105 hp @ 10000 rpm
Max Power Rear Tyre: 68.1 kW / 91.3 hp @ 9800 rpm
Max Torque: 72.6 Nm / 7.4 kgf-m / 53.5 ft-lbs @ 8000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Primary Reduction: 1.939 (64/33)
Final Reduction: (sprockets) 2.6875 (43/16)
Gear Ratio: 1st 2.8461 (37/13) 2nd 2.0625 (33/16) 3rd 1.6315 (31/19) 4th 1.3333 (28/21) 5th 1.1538 (30/26) 6th 1.0357 (29/28):1
Frame: Aluminium, twin spar
Front Suspension: 41mm Telescopic forks, no external adjustment
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: Pro-link single sided swing arm, adjustable preload
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 296 mm discs, 2 piston calipers
Rear Brakes: Single 256 mm disc, 2 piston caliper
Front Tyre: 120/70 VR17
Rear Tyre: 170/60 VR17
Rake: 26 degrees
Trail: 99 mm / 3.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 209 kg / 461 lbs
Wet Weight: 226 kg / 498 lbs
Fuel Capacity: 21 Litres / 5.5 gal
Consumption Average: 6.3 L/100 km / 15.8 km/l / 37.2 US mpg
Braking 60 km/h / 37 mph – 0: 13.2 m / 43.3 ft
Braking 100 km/h / 62 mph – 0: 37.0 m / 121.4 ft
Standing 1/4 Mile: 11.3 sec / 190.6 km/h / 118.4 mph
Top Speed: 232.7 km/h / 144.6 mph
Review: Motorcycle News

The post Honda VF750F 1994 (1994) appeared first on MotorcycleSpecifications.com.

]]> BMW F650 Funduro (1994) https://motorcyclespecifications.com/bmw-f650-funduro-1994-specs/ Sun, 02 Apr 2023 06:13:04 +0000 https://motorcyclespecifications.com/?p=41318 The BMW F 650 Funduro was produced from 1994 to 2000, with a total of 51,405 units manufactured. It is a four-stroke, single cylinder, DOHC motorcycle with a 652cc engine

The post BMW F650 Funduro (1994) appeared first on MotorcycleSpecifications.com.

]]> The BMW F 650 Funduro was produced from 1994 to 2000, with a total of 51,405 units manufactured. It is a four-stroke, single cylinder, DOHC motorcycle with a 652cc engine that produces 48 horsepower at 6500 rpm and 57 Nm of torque at 5200 rpm. It has a five-speed transmission, chain final drive, and a dry sump lubrication system. The frame is a single-loop, tubular design with bolt-on trussing. The front suspension consists of 41mm telescopic forks that are non-adjustable, and the rear suspension is a rising-rate monoshock with preload adjustment. The front and rear brakes are a single disc and a single-piston caliper. The front wheel is 19 inches with a 100/90 -19 57S tire, and the rear wheel is 17 inches with a 130/80 -17 65S tire. The dimensions of the bike are 2180mm (length) x 880mm (width) x 1220mm (height) with a wheelbase of 1480mm and a ground clearance of 180mm. The wet weight of the bike is 187 kg, and it has a fuel capacity of 17 liters with an average consumption of 5.5 l/100km. The BMW F 650 Funduro can accelerate from 0-100 km/h in 6.2 seconds, has a top speed of 165.2 km/h, and can reach a standing quarter-mile in 13.7 seconds at 149.8 km/h. It has a braking distance of 13.6m and 38.1m when stopping from 60-0 km/h and 100-0 km/h, respectively. The tank range of the bike is 309 km, and it is equipped with an electric starter and high voltage capacitor ignition.

Technical specifications:

Make Model: BMW F 650 Funduro

Year: 1994
Production: 1994 – 2000 total 51 405 units
Engine: Four stroke, single cylinder, DOHC, 4 valves per cylinder
Capacity: 652 cc / 39.8 cub. in.
Bore x Stroke: 100 x 83mm
Compression Ratio: 8.8:1
Cooling: Liquid
Lubrication: Dry sump
Induction: 2 x 33mm Mikuni carbs
Clutch: Multi plate in oil bath
Ignition: High voltage capacitor ignition
Starting: Electric
Spark Plug: NGK D8EA
Max Power: 35 kW / 48 hp @ 6500 rpm
Max Torque: 57 Nm / 5.8 kgf-m / 42 lb-ft. @ 5200 rpm
Transmission: 5 Speed
Gear Ratios: 1st 2.75 / 2nd 1.75 / 3rd 1.31 / 4th 1.05 / 5th 0.88: 1
Final Drive: Chain
Frame: Single loop tubular with bolt on trussing.
Front Suspension: 41mm Telescopic forks non adjustable.
Front Wheel Travel: 170 mm / 6.7 in.
Rear Suspension: Rising rate monoshock preload adjustable, swingarm.
Rear Wheel Travel: 165 mm / 6.5 in.
Front Brakes: Single 300 mm disc 2 piston caliper
Rear Brakes: Single 210 mm disc 1 piston caliper
Front Rim: 2.5 x 19
Rear Rim: 3.0 x 17
Front Tyre: 100/90 -19 57S
Rear Tyre: 130/80 -17 65S
Dimensions: Length: 2180mm / 86.2 in. Width: 880 mm / 34.6 in. Height: 1220 mm / 48 in.
Wheel Base: 1480 mm / 58.3 in.
Seat Height: 800 mm / 31.9 in.
Ground clearance: 180 mm / 7.1 in.
Wet Weight: 187 kg / 412.3 lbs.
Fuel Capacity: 17 Litres / 4.5 US gal.
Consumption Average: 5.5 l/100km / 42.8 US mpg
Tank Range: 309 kms / 192 miles
Braking 60 – 0 / 100 – 0: 13.6 m / 38.1m / 44.6 ft / 125.1 ft.
Standing 1/4 Mile: 13.7 sec / 149.8 km/h / 93.1 mph
Acceleration 0 – 100 km/h / 62 mph: 6.2 secs.
Top Speed: 165.2 km/h / 102.7 mph

The post BMW F650 Funduro (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda XR200R (1994) https://motorcyclespecifications.com/honda-xr200r-1994-specs/ Sat, 01 Apr 2023 12:33:08 +0000 https://motorcyclespecifications.com/?p=40338 The Honda XR 200R is a four-stroke, single-cylinder SOHC motorcycle with a 195 cc engine and a compression ratio of 10.2:1. It has a 2x 20mm piston valve Keihin carburetor

The post Honda XR200R (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda XR 200R is a four-stroke, single-cylinder SOHC motorcycle with a 195 cc engine and a compression ratio of 10.2:1. It has a 2x 20mm piston valve Keihin carburetor and solid-state CD ignition, making it kick-started. The 6-speed transmission and chain final drive give it a gear ratio of 1st 2.769:1, 2nd 1.941:1, 3rd 1.450:1, 4th 1.130:1, 5th 0.923:1, and 6th 0.785:1.

The front suspension is 35mm Kayaba with 208mm/8.2inch front wheel travel while the rear suspension is Pro-Link Kayaba damper adjustment for spring preload and rebound damping with 247mm/9.7inch rear wheel travel. Both front and rear brakes consist of drums. The bike has a front tyre of 3.00-21 and a rear tyre of 4.10-18.

The Honda XR 200R has a rake of 26 degrees, a trail of 105mm/4.1inch, and a wheelbase of 1365mm/53.7inch. The seat height is 905mm/35.6inch, dry weight is 102kg/224.8lbs, and wet weight is 109kg/240lbs. Additionally, ground clearance is 315mm/12.4inch, and fuel capacity is 10.9 Litres/2.9 gallons. It is a reliable, light machine with excellent off-road capabilities.

Technical specifications:

Make Model: Honda XR 200R

Year: 1994
Engine: Four stroke, single cylinder SOHC, 2 valve
Capacity: 195 cc / 11.8 cu-in
Bore x Stroke: 67 x 56.5 mm
Compression Ratio: 10.2:1
Induction: 2x 20 mm piston valve Keihin carburator
Ignition: Solid state CD
Spark Plug: NGK DR8ES-L
Starting: Kick
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.769:1 2nd 1.941:1 3rd 1.450:1 4th 1.130:1 5th 0.923:1 6th 0.785:1
Front Suspension: 35mm Kayaba
Front Wheel Travel: 208 mm / 8.2 in
Rear Suspension: Pro-link Kayaba damper adjustment for spring preload and rebound damping
Rear Wheel Travel: 247 mm / 9.7 in
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.10-18
Rake: 26 degrees
Trail: 105 mm / 4.1 in
Wheelbase: 1365 mm / 53.7 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 102 kg / 224.8 lbs
Wet-Weight: 109 kg / 240 lbs
Ground Clearance: 315 mm / 12.4 in
Fuel Capacity: 10.9 Litres / 2.9 gal

The post Honda XR200R (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GSX1100G (1994) https://motorcyclespecifications.com/suzuki-gsx1100g-1994-specs/ Fri, 31 Mar 2023 21:40:05 +0000 https://motorcyclespecifications.com/?p=39510 The Suzuki GSX1100G is a motorcycle that was produced in 1994. It has a four-stroke, transverse four-cylinder, DOHC, four-valve-per-cylinder engine with a capacity of 1127 cc. The bore x stroke

The post Suzuki GSX1100G (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GSX1100G is a motorcycle that was produced in 1994. It has a four-stroke, transverse four-cylinder, DOHC, four-valve-per-cylinder engine with a capacity of 1127 cc. The bore x stroke is 78 x 59 mm and the cooling system is air/oil cooled. The compression ratio is 10.0:1 and lubrication is wet sump. The induction is via 4 x Mikuni BST36 carburetors and ignition is analogue CDI. Starting the bike is electric. It has a maximum power of 74 kW/100 hp at 7500 rpm and maximum torque of 99 Nm/10.1 kgf-m/73 ft-lb at 4750 rpm. The clutch is wet, multiple discs, cable operated and it’s transmission has 5 speed, with a final drive through a shaft. The front suspension consists of 43 mm telescopic forks while the rear suspension is a full floater monoshock with 5-way preload, 20-way compression and 4-way rebound damping. The front brakes feature two 310 mm discs, 4 piston calipers, while the rear brake has a single 296 mm disc with a 2 piston caliper. Its front tire size is 110/80 – V18 and rear tire size is 160/70 – V17. The rake is 32 degrees and the trail is 156 mm/ 6.1 in. The length is 2220 mm/ 87.4 in, width is 805 mm/ 31.7 in and height is 1155 mm/ 45.5 in. The dry weight is 259 kg/ 570.9 lbs and wet weight is 280 kg/ 617.2 lbs. Its fuel capacity is 22 liters/5.5 US gal/4.8 Imp gal. The standing 1/4 mile time is 11.5 sec, with a top speed of 190 km/h/118 mph.

Technical specifications:

Make Model: Suzuki GSX 1100G

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 1127 cc / 68.7 cu-in
Bore x Stroke: 78 x 59 mm
Cooling System: Air/oil cooled
Compression Ratio: 10.0:1
Lubrication: Wet sump
Induction: 4 x Mikuni BST36 carburetors
Ignition: Analogue CDI (Capacitive Discharge Ign.)
Spark Plug: NGK, JR9B
Starting: Electric
Max Power: 74 kW / 100 hp @ 7500 rpm
Max Torque: 99 Nm / 10.1 kgf-m / 73 ft-lb @ 4750 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: 43 mm Telescopic forks
Rear Suspension: Full floater monoshock, 5-way preload 20-way compression and 4-way rebound damping.
Front Brakes: 2 x 310 mm Discs, 4 piston calipers
Rear Brakes: Single 296 mm disc, 2 piston caliper
Front Tyre: 110/80 – V18
Rear Tyre: 160/70 – V17
Rake: 32 degrees
Trail: 156 mm / 6.1 in
Dimensions: Length 2220 mm / 87.4 in Width 805 mm / 31.7 in Height 1155 mm / 45.5 in
Dry Weight: 259 kg / 570.9 lbs
Wet weight: 280 kg / 617.2 lbs
Fuel Capacity: 22 Litres / 5.5 US gal / 4.8 Imp gal
Standing 1/4 Mile: 11.5 sec / 190 km/h / 118 mph

The post Suzuki GSX1100G (1994) appeared first on MotorcycleSpecifications.com.

]]> Bimota SB7 (1994) https://motorcyclespecifications.com/bimota-sb7-1994-specs/ Fri, 31 Mar 2023 17:59:53 +0000 https://motorcyclespecifications.com/?p=39311 The Bimota SB7 is a rare motorcycle from 1994 with only 200 units produced. It features a four-cylinder, liquid-cooled engine with a capacity of 749cc and a max power output

The post Bimota SB7 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Bimota SB7 is a rare motorcycle from 1994 with only 200 units produced. It features a four-cylinder, liquid-cooled engine with a capacity of 749cc and a max power output of 132 hp at 10,000 rpm. The frame is made of double perimeter beams joined without joints or cast parts, allowing for a smoother ride. The front suspension consists of 46mm Paioli telescopic forks with bump and rebound adjustment, while the rear suspension has an Ohlins shock with preload, bump, and rebound damping adjustment. The brakes include 2x 320mm discs with Brembo 4-piston calipers in the front and a single 230mm disc with a 2-piston caliper in the rear. The wheelbase is 1390mm, while the seat height is 800mm. The bike weighs 208kg dry and 228kg wet with a fuel capacity of 17 litres. The Bimota SB7 received a positive road test by Motociclismo in 1994.

Technical specifications:

Make Model: Bimota SB7

Year: 1994
Production: 200 units
Engine: Four stroke, transverse four cylinder, DOHC 4 valves per cylinder
Capacity: 749 cc / 45.7 cub in.
Bore x Stroke: 70 x 48.7 mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Induction: TDD Fuel injection
Ignition: –
Starting: Electric
Max Power: 98.4 kW / 132 hp @ 10000 rpm
Max Torque: 82.6 Nm / 8.4 kg-f/ 61 ft-lb @ 8500 rpm
Transmission: 6 Speed
Final Drive: Chain
Lubrication: Wet sump
Frame: Double perimeter beam “Straight Line Connection” (SLC). Extruded in aluminium, the beams join at the steering shaft and the swing arm without joins only cast parts.
Front Suspension: 46mm Paioli telescopic forks, bump and rebound adjustable
Rear Suspension: ~Ahlins shock, preload, bump and rebound damping adjustable
Front Brakes: 2x 320mm discs Brembo 4 piston calipers
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1390 mm / 54.7 in.
Rake: 23.5 degrees
Trail: 94 mm
Wheel base: 1400 mm / 55.1 in.
Seat height: 800 mm / 31.5 mm
Dry weight: 208kg / 458.6 lbs
Wet weight: 228 kg / 502.7 lbs
Fuel Capacity: 17 Litres / 4.5 US gal
Road Test: Motociclismo 1994

The post Bimota SB7 (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda XR 600R (1994) https://motorcyclespecifications.com/honda-xr-600r-1994-specs/ Fri, 31 Mar 2023 11:49:02 +0000 https://motorcyclespecifications.com/?p=38974 The Honda XR 600R is a motorcycle model from 1994 with a four-stroke, single-cylinder, SOHC engine with 591 cc capacity and 9.0:1 compression ratio. It has a kick start and

The post Honda XR 600R (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda XR 600R is a motorcycle model from 1994 with a four-stroke, single-cylinder, SOHC engine with 591 cc capacity and 9.0:1 compression ratio. It has a kick start and can generate 46 hp at 6000 rpm and a maximum torque of 51.9 Nm at 5500 rpm. The transmission has five speeds, and the final drive is via a #520 O-ring-sealed chain. The front suspension has a 43 mm air-adjustable Showa cartridge fork, while the rear suspension has a Pro-Link single Showa shock with 20-position compression and rebound damping adjustability. The front brake has a single 256 mm disc and two-piston calipers, while the rear brake has a single disc and one-piston caliper. The front and rear tires have sizes of 80/100-21 and 110/100-18, respectively. The XR 600R has a wheelbase of 1455.4 mm, seat height of 955.0 mm, and ground clearance of 345.5 mm. It has a dry weight of 134 kg and a wet weight of 146 kg, and its fuel capacity is 10.5 litres. The motorcycle can reach a standing 1/4 mile speed of 14.6 sec at 134.5 km/h, and its top speed is 143.2 km/h.

Technical specifications:

Make Model: Honda XR 600R

Year: 1994
Engine: Four stroke, single cylinder, SOHC, 4 valve RFVC
Capacity: 591 cc / 36.0 cu-in
Bore x Stroke: 97 x 80 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Induction: 39 mm PD type
Ignition: Solid-state CDI
Starting: Kick
Max Power: 46 hp / 33.5 kW @ 6000 rpm
Max Torque: 51.9 Nm / 38.2 ft-lb @ 5500 rpm
Transmission: 5 Speed
Final Drive: #520 O-ring-sealed chain; 14T/48T
Front Suspension: 43 mm air-adjustable leading-axle Showa cartridge fork with eight-position compression damping adjustability
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Pro-Link single Showa shock with spring preload, 20-position compression and 20-position rebound damping adjustability
Rear Wheel Travel: 280 mm / 11.0 in
Front Brakes: Single 256 mm disc 2 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Wheelbase: 1455.4 mm / 57.3 in
Seat Height: 955.0 mm / 37.6 in
Ground Clearance: 345.5 mm / 13.6 in
Dry Weight: 134 kg / 295.5 lbs
Wet Weight: 146 kg / 321.9 lbs
Fuel Capacity: 10.5 Litres / 2.6 US gal
Standing 1/4 Mile: 14.6 sec / 134.5 km/h
Top Speed: 143.2 km/h

The post Honda XR 600R (1994) appeared first on MotorcycleSpecifications.com.

]]> Yamaha YZF750SP (1994) https://motorcyclespecifications.com/yamaha-yzf750sp-1994-specs/ Fri, 31 Mar 2023 05:03:59 +0000 https://motorcyclespecifications.com/?p=38596 The Yamaha YZF750SP motorcycle was introduced in 1994 and features a transverse four-cylinder engine with DOHC and 5 valves per cylinder. It has a capacity of 749 cc and a

The post Yamaha YZF750SP (1994) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha YZF750SP motorcycle was introduced in 1994 and features a transverse four-cylinder engine with DOHC and 5 valves per cylinder. It has a capacity of 749 cc and a compression ratio of 11.5:1. The bike has a 6-speed transmission and wet, multiple disc clutch. It is also equipped with fully adjustable front and rear suspension and powerful brakes with 6 piston calipers in the front and a 2 piston caliper in the rear. The bike has a top speed of 260.6 km/h and can go from 0-100 km/h in 2.9 seconds. It has a fuel capacity of 19 litres and a wet weight of 215 kg. The Yamaha YZF750SP has a distinctive look and is known for its excellent handling and performance capabilities, making it a popular choice for many riders. In a 1993 Moto Sprint Group Test, the bike performed well and was well-received by riders.

Technical specifications:

Make Model: Yamaha YZF 750SP

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 5 valves per cylinder.
Capacity: 749 cc / 45.7 cu-in
Bore x Stroke: 72 x 46 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: 4x 4 Y Keihin FCRD39/4
Ignition: T.C.I. Digital
Starting: Electric
Max Power: 125 hp / 91.1 kW @ 12000 rpm
Max Power Rear Tyre: 114.5 hp @ 12000 rpm )
Max Torque: 80.4 Nm / 8.2 kgf-m / 59.3 lb-ft @ 9500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.462 2nd 1.941 3rd 1.632 4th 1.435 5th 1.300 6th 1.190
Front Suspension: 41mm UD fork, fully adjustable.
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monocross type fully adjustable ~Ahlins remote reservoir shock,
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 6 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Dimensions: Length 2170 mm / 85.4 in Width 730 mm / 28.7 in Height 1165 mm / 45.8 in
Wheelbase: 1,420 mm / 55.9 in
Seat Height: 795 mm / 31.2 in
Ground Clearance: 140 mm / 5.5 in
Dry Weight: 193 kg / 425 lbs
Wet Weight: 215 kg / 479 lbs
Fuel Capacity: 19 Litres / 4.3 gal
Consumption Average: 15.0 km/lit
Braking 60 – 0 / 100 – 0: 12.6 m / 35.7 m
Standing 1/4 Mile: 10.71 sec / 207.8 km/h
Top Speed: 260.6 km/h
Road Test: Moto Sprint Group Test 1993

The post Yamaha YZF750SP (1994) appeared first on MotorcycleSpecifications.com.

]]> Jawa 638 (1994) https://motorcyclespecifications.com/jawa-638-1994-specs/ Thu, 30 Mar 2023 14:49:08 +0000 https://motorcyclespecifications.com/?p=37798 The Jawa 638 is a two-stroke parallel-twin motorcycle with a 343.4 cc engine producing 23.5 hp at 5250 rpm and 31.4 Nm of torque at 4750 rpm. It uses a

The post Jawa 638 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Jawa 638 is a two-stroke parallel-twin motorcycle with a 343.4 cc engine producing 23.5 hp at 5250 rpm and 31.4 Nm of torque at 4750 rpm. It uses a Jikov 28-29 CE horizontal carburetor and a Magneto VAPE A67 contactless ignition.

The motorcycle has a four-speed transmission and a chain final drive. It features a tubular, double, closed frame, hydraulic telescopic fork front suspension, and swingarm rear suspension with hydraulic telescopic in suspension units. The front and rear brakes are a hydraulic control A265 mm disc and a mechanical control A165 mm drum respectively.

The Jawa 638 has steel wheels with a deepened profile and multi-spokes. It has a length of 2100 mm, a width of 780 mm, and a height of 1160 mm with a ground clearance of 120 mm and seat height of 820 mm. It has a dry weight of 149 kg and a wet weight of 162 kg with a fuel capacity of 17 L and fuel reserve of 2.8 L. The motorcycle has a GVWR of 342 kg and a turning radius of 3.5 meters. It was produced in 1994.

Technical specifications:

Make Model: Jawa 638

Year: 1994
Engine: Two stroke, parallel twin
Capacity: 343.4 cc / 21.0 cu in
Bore x Stroke: 58 x 65 mm
Compression Ratio: 9.8:1
Cooling System: Air cooled
Induction: Jikov 28-29 CE horizontal carburetor, slide type
Ignition: Magneto VAPE A67 contactless
Battery: 12V, 6Ah
Starting: Kick
Max Power: 17.2 kW / 23.5 hp @ 5250 rpm
Max Torque: 31.4 Nm / 3.2 kgf-m / 23.2 ft.lb @ 4750 rpm
Clutch: Multi disc in oil bath
Transmission: 4 Speed
Final Drive: Chain
Gear Ratios: 1st 14.50 / 2nd 8.60 / 3rd 6.10 / 4th 4:96:1
Frame: Tubular, double, closed
Front Suspension: Hydraulic telescopic fork, steel spiral springs
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Swingarm, hydraulic telescopic in suspension units, spiral springs
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: ~A265 mm Disc, hydraulic control
Rear Brakes: ~A165 mm Drum, mechanical control
Wheels: Steel, deepened profile, multi-spokes
Front Wheel: 2.15 B x 18″
Rear Tyre: 2.15 B x 18″
Dimensions: Length: 2100 mm / 82.7 in Width: 780 mm / 30.7 in Height: 1160 mm / 45.7 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 120 mm / 4.7 in
Seat Height: 820 mm / 32.3 in
Turning Radius: 3.5 m / 11.5 ft
Dry Weight: 149 kg / 328 lbs
Wet Weight: 162 kg / 357 lbs
GVWR: 342 kg / 754 lbs
Fuel Capacity: 17 L / 4.5 US gal
Fuel Reserve: 2.8 L / 0.74 US gal

The post Jawa 638 (1994) appeared first on MotorcycleSpecifications.com.

]]> Aprilia RS 125SP Replica Loris Reggiani (1994) https://motorcyclespecifications.com/aprilia-rs-125sp-replica-loris-reggiani-1994-specs/ Thu, 30 Mar 2023 00:05:56 +0000 https://motorcyclespecifications.com/?p=36967 The Aprilia RS 125SP Replica Loris Reggiani (1994) is a high-performance motorcycle with a single cylinder, two-stroke engine that has reed valves induction, a 125 cc capacity and a compression

The post Aprilia RS 125SP Replica Loris Reggiani (1994) appeared first on MotorcycleSpecifications.com.

]]> The Aprilia RS 125SP Replica Loris Reggiani (1994) is a high-performance motorcycle with a single cylinder, two-stroke engine that has reed valves induction, a 125 cc capacity and a compression ratio of 14.5:1. It is liquid cooled, has Dell’Orto VHSB 34LD induction, electronic ignition, and electric starting. The motorcycle has a maximum power of 24.8 kW / 34 hp @ 11000 rpm and a maximum torque of 25 Nm / 2.5 kgf-m / 18.4 lb-ft @ 9000 rpm. Its transmission consists of six speeds and its final drive is a chain. The front suspension contains upside-down forks, 40mm while the rear suspension contains monoshock. The front brake is a single 320 mm discs, 4 piston caliper, and the rear brake is a single 240 mm disc, 2 piston caliper. The front tyre is 110/70-17 while the rear tyre is 150/60-17. The motorcycle has a dry weight of 115 kg / 254 lbs.

Technical specifications:

Make Model: Aprilia RS 125SP Replica Loris Reggiani

Year: 1994
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: Dell’Orto VHSB 34LD
Ignition: Electronic
Starting: Electric
Max Power: 24.8 kW / 34 hp @ 11000 rpm
Max Torque: 25 Nm / 2.5 kgf-m / 18.4 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Dry Weight: 115 kg / 254 lbs

The post Aprilia RS 125SP Replica Loris Reggiani (1994) appeared first on MotorcycleSpecifications.com.

]]> Jawa 640 Chopper (1994) https://motorcyclespecifications.com/jawa-640-chopper-1994-specs/ Wed, 29 Mar 2023 23:47:55 +0000 https://motorcyclespecifications.com/?p=36949 The Jawa 644 Chopper is a motorcycle model from 1994, with a two-stroke, 343.4cc parallel twin engine that is air-cooled and has a Jikov 28-29 CE horizontal carburetor. The ignition

The post Jawa 640 Chopper (1994) appeared first on MotorcycleSpecifications.com.

]]> The Jawa 644 Chopper is a motorcycle model from 1994, with a two-stroke, 343.4cc parallel twin engine that is air-cooled and has a Jikov 28-29 CE horizontal carburetor. The ignition is a Magneto VAPE A67 contactless system and it has a 12V, 6Ah battery with a kick start. It produces a maximum power of 18 kW (25 hp) at 5500 rpm and a maximum torque of 33 Nm (25 ft.lb) at 5250 rpm. The transmission is a four-speed system with a multi-disc clutch in oil bath and a chain final drive. The frame is tubular and double, with a closed design, and the suspension consists of a hydraulic telescopic fork with steel spiral springs in the front, and a swingarm with hydraulic telescopic suspension units and spiral springs in the rear. The motorcycle has a front disc brake and a rear drum brake, with hydraulic and mechanical control respectively, and steel wheels with multi-spokes and deepened profiles. The front and rear tires have a size of 90/100-17” and 100/90-18” respectively. The dry weight is 147 kg (322 lbs) and the fuel capacity is 15 L (4.0 US gal).

Technical specifications:

Make Model: Jawa 644 Chopper

Year: 1994
Engine: Two stroke, parallel twin
Capacity: 343.4 cc / 21.0 cu in
Bore x Stroke: 58 x 65 mm
Compression Ratio: 10.2:1
Cooling System: Air cooled
Induction: Jikov 28-29 CE horizontal carburetor, slide type
Ignition: Magneto VAPE A67 contactless
Battery: 12V, 6Ah
Starting: Kick
Max Power: 18 kW / 25 hp @ 5500 rpm
Max Torque: 33 Nm / 3.4 kgf-m / 25 ft.lb @ 5250 rpm
Clutch: Multi disc in oil bath
Transmission: 4 Speed
Final Drive: Chain
Frame: Tubular, double, closed
Front Suspension: Hydraulic telescopic fork, steel spiral springs
Rear Suspension: Swingarm, hydraulic telescopic in suspension units, spiral springs
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: ~A265 mm Disc, hydraulic control
Rear Brakes: ~A165 mm Drum, mechanical control
Wheels: Steel, deepened profile, multi-spokes
Front Tyre: 90/100-17″
Rear Tyre: 100/90-18″
Dry Weight: 147 kg / 322 lbs
Fuel Capacity: 15 L / 4.0 US gal

The post Jawa 640 Chopper (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda XR250R (1994) https://motorcyclespecifications.com/honda-xr250r-1994-specs/ Wed, 29 Mar 2023 21:57:59 +0000 https://motorcyclespecifications.com/?p=36844 The Honda XR 250R is a 1994 model motorcycle with a four-stroke, single cylinder SOHC, 4 valve engine that has a capacity of 249 cc. The bike comes with a

The post Honda XR250R (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda XR 250R is a 1994 model motorcycle with a four-stroke, single cylinder SOHC, 4 valve engine that has a capacity of 249 cc. The bike comes with a single 30 mm carburetor and CDI ignition. It has a maximum power of 30 hp at 9000rpm and a torque of 24.5 Nm at 7500rpm. The bike has a six-speed transmission and a chain final drive. The front suspension on this bike is 41 mm air-assisted telescopic forks, and the rear suspension is Pro-Link, adjustable in compression and rebound. The front and rear brakes are single discs, and it has a front tyre size of 80/100-21 and a rear tyre size of 110/100-18. The Honda XR 250R has a length of 2035mm, width of 965mm and a height of 1100mm. It has a wheelbase of 1420mm, a seat height of 905mm and ground clearance of 315mm. The dry weight of the bike is 108 kg, and when fully fueled, it weighs 112 kg. It has a fuel capacity of 9 litres. This bike was reviewed in the Enduro Test of 1994 Tuttomoto.

Technical specifications:

Make Model: Honda XR 250R

Year: 1994
Engine: Four-stroke, single cylinder SOHC, 4 valve
Capacity: 249 cc / 15.1 cu-in
Bore x Stroke: 73 x 59.5 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: Single 30 mm carburator
Ignition: CDI
Spark Plug: NGK DPR 9Z
Starting: Kick
Max Power: 30 hp / 21.9 kW @ 9000 rpm
Max Torque: 24.5 Nm @ 7500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 41 mm Air assisted telescopic forks
Front Wheel Travel: 280 mm / 11.0 in
Rear Suspension: Pro-Link, adjustable compression and rebound
Rear Wheel Travel: 280 mm / 11.0 in
Front Brakes: Single 240mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Rake: 26.5 degrees
Trail: 105 mm / 4.1 in
Dimensions: Length 2035 mm / 80.1 in Width 965 mm / 37.9 in Height 1100 mm / 43.3 in
Wheelbase: 1420 mm / 55.9 in
Seat Height: 905 mm / 35.6 in
Ground Clearance: 315 mm / 12.4 in
Dry Weight: 108 kg / 238 lbs
Wet Weight: 112 kg / 247 lbs
Fuel Capacity: 9 Litres / 2.4 gal
Road Test: Enduro Test 1994 Tuttomoto

The post Honda XR250R (1994) appeared first on MotorcycleSpecifications.com.

]]> Yamaha FZR600 (1994) https://motorcyclespecifications.com/yamaha-fzr600-1994-specs/ Wed, 29 Mar 2023 20:24:55 +0000 https://motorcyclespecifications.com/?p=36759 The Yamaha FZR 600R from 1994 is a four stroke, transverse four cylinder motorcycle with a capacity of 599cc and a compression ratio of 12.0:1. It has a liquid-cooled cooling

The post Yamaha FZR600 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Yamaha FZR 600R from 1994 is a four stroke, transverse four cylinder motorcycle with a capacity of 599cc and a compression ratio of 12.0:1. It has a liquid-cooled cooling system and is lubricated by a wet sump. The bike utilizes a 4x 34 mm Keihin CVKD CV induction system and is ignited by a transistor-controlled digital spark plug. The Yamaha FZR 600R can reach a max power of 73.8 kW / 99 hp @ 11500 rpm and a max torque of 65.7 Nm / 6.7 kgf-m / 48 lb-ft @ 9500 rpm. It has an electric starting system and a wet, multi-disc clutch. The transmission is a 6-speed constant mesh and the final drive is an O-ring chain. The front suspension consists of a 41mm telescopic fork while the rear suspension is a rising-rate monoshock. The front brakes consist of 2 x 298mm discs, 4 piston calipers while the rear brakes are a single 245 mm disc, 2 piston caliper. The bike has a wheelbase of 1415mm and a seat height of 795mm. The dry weight is 184kg with a fuel capacity of 19 liters. The top speed of the Yamaha FZR 600R is 238.2 km/h / 148 mph. A manual can be found in The FZR Archives.

Technical specifications:

Make Model: Yamaha FZR 600R

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 599 cc / 36.6 cub in.
Bore x Stroke: 62 x 49.6 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: 4x 34 mm Keihin CVKD CV
Ignition: Transistor controlled digital
Sparkplug: CR9E or CR8E/NGK – U27ESR-N or U24ESR-N/NIPPONDENSO
Sparkplug Gap: 0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
Generator: AC magneto generator
Battery: GM12AZ/12v 12AH
Electrics: Headlight type – Quartz bulbBulb wattage/quantity Headlight – 12V 35W/35W x 2 Tail/brake light – 12V 8W/27W x 2 Front flasher/running light – 12V 27W/8W x 2 Rear flasher light – 12V 27W x 2 Meter light – 12V 1.7 x 4 Neutral indicator light – 12V 3.4V x 1 High beam indicator light – 12V 3.4V x 1 Oil level indicator light – 12V 3.4V x 1 Turn indicator light – 12V 3.4V x 1
Starting: Electric
Max Power: 73.8 kW / 99 hp @ 11500 rpm
Max Power Rear Tyre: 67.7 kW / 90.9 hp @ 11400 rpm
Max Torque: 65.7 Nm / 6.7 kgf-m / 48 lb-ft @ 9500 rpm
Clutch: Wet, multi-disc
Transmission: 6 speed
Transmission Type: Constant mesh 6-speed
Final Drive: O-ring chain, 530 size, 106 links
Primary reduction system: Spur gear
Primary reduction ratio: 82/48 (1.708)
Secondary reduction ratio: 45/15 (3.000)
Gear Ratio: 1st – 37/13 (2.846) 2nd – 37/19 (1.947) 3rd – 31/20 (1.550) 4th – 28/21 (1.333) 5th -31/26 (1.192) 6th – 30/27 (1.111):1
Frame: Double cradle
Front Suspension: 41mm Telescopic fork preload adjustable, coil spring, oil damper
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Rising-rate Monoshock preload and rebound adjustable, gas, coil spring, oil damper
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2 x 298mm discs, 4 piston calipers
Rear Brakes: Single 245 mm disc, 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Rake: 25 degrees
Trail: 97 mm / 3.8 in
Dimensions: Length 2145 mm / 84.4 in Width 725 mm / 28.5 in Height 1180 mm / 46.5 in
Wheelbase: 1415 mm / 55.7 in
Seat Height: 795 mm / 31.3 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 184 kg / 405 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Reserve: 3.4 Litres / 0.9 gal
Consumption Average: 5.7 L/100 km / 17.4 km/l / 40.9 US mpg
Braking 60 km/h / 37 mph – 0: 13.0 m / 42.7 ft
Braking 100 km/h / 62 mph – 0: 36.3m / 119.1 ft
Standing 1/4 Mile: 11.1 sec / 194.8 km/h / 121 mph
Top Speed: 238.2 km/h / 148 mph
Manual: The FZR Archives

The post Yamaha FZR600 (1994) appeared first on MotorcycleSpecifications.com.

]]> Harley Davidson VR 1000 (1994) https://motorcyclespecifications.com/harley-davidson-vr-1000-1994-specs/ Wed, 29 Mar 2023 20:08:57 +0000 https://motorcyclespecifications.com/?p=36745 The Harley Davidson VR1000 was a motorcycle released in 1994. It was equipped with a four-stroke, 60 degrees V-Twin, DOHC engine that had a capacity of 1000cc. Its Weber EFI

The post Harley Davidson VR 1000 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Harley Davidson VR1000 was a motorcycle released in 1994. It was equipped with a four-stroke, 60 degrees V-Twin, DOHC engine that had a capacity of 1000cc. Its Weber EFI system and electronic ignition produced a maximum power of 135 horsepower at 10000 rpm. The compression ratio was set at 11.6:1, making it a high-performance machine. The bike had a dry multi-disc clutch and five-speed transmission that drove the chain. The body of the bike was fitted with an aluminum 2-spar parameter frame that helped reduce weight, and inverted forks at the front, with a single shock at the back, helped to smooth out any bumps on the road. The front brakes utilized two discs, while the rear brake used a single disc to bring the bike to a stop. The bike had 120/70 ZR17 and 170/70 ZR17 tires at the front and back, respectively, making it easy to maneuver. The Harley Davidson VR1000 weighed 176 kilograms and could hold a fuel capacity of 17 liters. Overall, the Harley Davidson VR1000 was a high-performance bike that offered a unique riding experience to its riders.

Technical specifications:

Make Model: Harley Davidson VR1000

Year: 1994
Engine: Four stroke, 60 degrees V-Twin, DOHC, 4 valves per cylinder.
Capacity: 1000
Bore x Stroke: 98 x 66 mm
Compression Ratio: 11.6;1
Induction: Weber EFI
Ignition / Starting: Electronic / electric
Max Power: 135 hp @ 10000 rpm
Clutch: Dry Multi-disc
Transmission / Drive: 5 Speed / chain
Frame: Aluminium 2 Spar parameter
Front Suspension: Inverted forks
Rear Suspension: Single Shock
Front Brakes: 2X discs
Rear Brakes: Single disc
Front Tyre: 120/70 ZR17
Rear Tyre: 170/70 ZR17
Wet-Weight: 176 kg
Fuel Capacity: 17 Litres

The post Harley Davidson VR 1000 (1994) appeared first on MotorcycleSpecifications.com.

]]> Suzuki GSX-r 750 (1994) https://motorcyclespecifications.com/suzuki-gsx-r-750-1994-specs/ Wed, 29 Mar 2023 11:20:02 +0000 https://motorcyclespecifications.com/?p=36252 The Suzuki GSX-r 750WR motorcycle was produced in 1994 and features a four-stroke, transverse four-cylinder engine with a capacity of 749 c/45.7 cub. in. It has a compression ratio of

The post Suzuki GSX-r 750 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Suzuki GSX-r 750WR motorcycle was produced in 1994 and features a four-stroke, transverse four-cylinder engine with a capacity of 749 c/45.7 cub. in. It has a compression ratio of 11.8:1, a liquid-cooled cooling system, and uses synthetic 10W/40 engine oil. The exhaust system is a 4-into-2-into-1 stainless-steel exhaust, and the lubrication system is wet sump. The motorcycle has a 6-speed, constant mesh transmission with a final drive of #530 Chain. The frame is a 5-sided aluminum pipe frame with a sand-casted steering head section and cast swing arm pivot. The front suspension is Showa 43 mm cartridge style upside-down forks, and the rear suspension is full floater with preload, compression, and rebound adjustable. The front brakes consist of 2 x 310 mm discs and 6 piston Nissin callipers, while the rear brake has a single 280 mm disc and a 2 piston Nissin calliper. The motorcycle has an average consumption of 6.3 l/100 km and a fuel capacity of 21 liters. It can go from 100kmh-0 in 36.7m and has a top speed of 246 km/h. The Suzuki GSX-r 750WR comes in two color options: white/blue and red/purple/black. Overall, this motorcycle model received favorable reviews from Motorcyclist in 1994.

Technical specifications:

Make Model: Suzuki GSX-R 750WR

Year: 1994
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 749 c / 45.7 cub. in.
Bore x Stroke: 70 x 48.7 mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Engine Oil: Synthetic,10W/40
Exhaust System: 4-into-2-into-1 Stainless-steel exhaust
Lubrication: Wet sump
Induction: 4 x TRM40 carburetors
Ignition: Computer controlled electronic ignition
Spark Plug: NGK, CR9EK
Battery: 8 Amp/hour
Starting: Electric
Max Power: 83.5 kW / 112 hp @ 10500 rpm
Max Torque: 75 Nm / 7.6 kgf-m / 55.3 ft-lb @ 1000 rpm
Clutch: Cable operated, wet multiple, coil spring
Transmission: 6 Speed, constant mesh
Final Drive: #530 Chain, O-ring sealed, 108 links
Gear Ratios: 1st 2.87 / 2nd 2.06 / 3rd 1.65 / 4th 1.43 / 5th 1.26 / 6th 1.12:1
Frame: 5-sided aluminium pipe frame with sand-casted steering head section and cast swing arm pivot
Front Suspension: Showa 43 mm cartridge style upside-down forks, preload, compression and rebound adjustable
Front Wheel Travel: 120 mm / 4.7 in.
Rear Suspension: Full floater, preload, compression and rebound adjustable
Front Brakes: 2 x 310 mm Discs, 6 piston Nissin calipers
Rear Brakes: Single 280 mm disc, 2 piston Nissin caliper
Wheels: Alloy, 3 spoke
Front Rim: 3.5 x 17
Front Tyre: 120/70 ZR17
Rear Rim: 5.5 x 17
Rear Tyre: 180/55 ZR17
Rake: 24.5 degrees
Trail: 94 mm / 3.7 in.
Wheelbase: 1440 mm / 56.7 in.
Dimensions: Length 2095 mm / 82.5 in. Width 730 mm / 28.7 in. Height 1135 mm / 44.7 in.
Seat Height: 795 mm / 31.3
Dry Weight: 199 kg / 438.6 lbs
Wet Weight: 229.5 kg / 506 lbs.
Fuel Capacity: 21 Litres / 5.5 US gal / 4.6 Imp gal
Average Consumption: 6.3 l/100 km / 15.8 km/l / 37.2 US mpg / 44.8 Imp mpg
Braking 100kmh – 0 / 60 mph – 0: 36.7 m / 120.4 ft
Braking 60 kmh – 0 / 37 mph – 0: 12.9 m / 42.3 ft
Standing 1/4 mile: 11.16 sec / 199 km/h / 124 mph
Top Speed: 246 km/h / 153 mph
Colours: White/Blue, Red/Purple/Black
Review: Motorcyclist, 1994

The post Suzuki GSX-r 750 (1994) appeared first on MotorcycleSpecifications.com.

]]> Yamaha XTZ 750 Super Teneré (1994) https://motorcyclespecifications.com/yamaha-xtz-750-super-tenere-1994-specs/ Wed, 29 Mar 2023 06:56:08 +0000 https://motorcyclespecifications.com/?p=36007 The 1994 Yamaha XTZ 750 Super Ténéré is a four-stroke motorcycle equipped with a parallel twin cylinder, DOHC engine with five valves per cylinder, and a capacity of 749 cc

The post Yamaha XTZ 750 Super Teneré (1994) appeared first on MotorcycleSpecifications.com.

]]> The 1994 Yamaha XTZ 750 Super Ténéré is a four-stroke motorcycle equipped with a parallel twin cylinder, DOHC engine with five valves per cylinder, and a capacity of 749 cc or 45.7 cu-in. The engine has a compression ratio of 9.5:1 and is cooled by liquid. It also has a lubrication system of wet sump and runs on 20W/40 grade engine oil. The motorcycle’s induction is provided by two 38mm Mikuni BDST38 CV carburetors, and its ignition system is driven by TCI technology. The motorcycle has a maximum power of 69.3 hp/54 kW at 7500 rpm and can reach a top speed of 192 km/h or 119.3 mph. The motorcycle also has a wet weight of 236 kg or 520.3 lbs, a fuel capacity of 26 liters or 6.6 gallons, and a fuel efficiency of 16.5 km/lit. The Super Ténéré has a chain final drive and a steel single cradle frame. The suspension system, on the other hand, is composed of telescopic front forks and a monoshock rear suspension that provides a front wheel travel of 235 mm or 9.2 in and a rear wheel travel of 215 mm or 8.4 in. Braking is provided by two 245mm front discs and a single 236mm rear disc, while the wheelbase measures 1505 mm or 59.3 in. The Super Ténéré has dimensions of 2285 mm in length, 815 mm in width, and a seat height of 865 mm or 34.1 inches. Its front and rear tires are 90/90-21 and 140/80-17, respectfully. Its stopping distance and quarter-mile time are 14.25 m and 12.8 sec/162.1 km/h, respectively.

Technical specifications:

Make Model: Yamaha XTZ 750 Super T~A(c)n~A(c)r~A(c)

Year: 1994
Engine: Four -stroke, parallel twin cylinder, DOHC, 5 valves per cylinder
Capacity: 749 cc / 45.7 cu-in
Bore x Stroke: 87 x 63 mm
Cooling System: Liquid cooled,
Compression Ratio: 9.5:1
Lubrication: Wet sump
Engine Oil: 20W/40
Exhaust: Single stainless steel pipe
Induction: 2x 38mm Mikuni BDST38 CV carburetors
Ignition: TCI (Transistor Controlled Ignition)
Spark Plug: NGK, DPR8EA-9
Starting: Electric
Max Power: 69.3 hp / 54 kW @ 7500 rpm
Max Torque: 68 Nm / 50.2 lb-fts @ 6750 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, Single cradle frame
Front Suspension: Telescopic forks.
Front Wheel Travel: 235 mm / 9.2 in
Rear Suspension: Monoshock, adjustable preload compression damping adjustment
Rear Wheel Travel: 215 mm / 8.4 in
Front Brakes: 2x 245mm discs
Rear Brakes: Single 236mm disc
Front Tyre: 90/90-21
Rear Tyre: 140/80-17
Dimensions: Length 2285 mm / 90 in Width 815 mm / 32.1 in
Wheelbase: 1505 mm / 59.3 in
Seat Height: 865 mm / 34.1 in
Dry Weight: 203 kg / 447.5 lbs
Wet Weight: 236 kg / 520.3 lbs
Fuel Capacity: 26 Litres / 6.6 gal
Consumption Average: 16.5 km/lit
Braking 60 – 0 / 100 – 0: 14.25 m / 42.06 m
Standing 1/4 Mile: 12.8 sec / 162.1 km/h
Top Speed: 192.0 km/h / 119.3 mph

The post Yamaha XTZ 750 Super Teneré (1994) appeared first on MotorcycleSpecifications.com.

]]> Honda NSR 250SP Rothmans Replica MC28 (1994) https://motorcyclespecifications.com/honda-nsr-250sp-rothmans-replica-mc28-1994-specs/ Wed, 29 Mar 2023 03:47:58 +0000 https://motorcyclespecifications.com/?p=35834 The Honda NSR 250SP Rothmans Replica MC28 is a two-stroke motorcycle from 1994 with a V-twin cylinder engine and a capacity of 249cc. It has a kick start and reaches

The post Honda NSR 250SP Rothmans Replica MC28 (1994) appeared first on MotorcycleSpecifications.com.

]]> The Honda NSR 250SP Rothmans Replica MC28 is a two-stroke motorcycle from 1994 with a V-twin cylinder engine and a capacity of 249cc. It has a kick start and reaches a maximum power of 40hp at 9000rpm with a max torque of 3.3 kgf-m at 8000rpm. The frame is made of aluminum and it has a 41mm telescopic front suspension and a Pro-Link single shock swingarm for the rear suspension. The motorcycle has 2x disc brakes with 2 piston calipers in the front and a single disc brake with a 1 piston caliper in the back. It has a dry weight of 138 kg, a fuel capacity of 16 liters or 4.2 US gallons, and a ground clearance of 130 mm or 5.1 inches. The Honda NSR 250SP Rothmans Replica MC28 model comes in three types: Type I, Type II, and Technical.

Technical specifications:

Make Model: Honda NSR 250SP Rothmans Replica MC28

Year: 1994
Engine: Two stroke, 90 degreesV-twin cylinder, reed valve/exhaust valve
Capacity: 249 c / 15.2 cu-in
Bore x Stroke: 54 x 54.5 mm
Cooling System: Liquid cooled
Compression Ratio: 7.4: 1
Induction: TB10 Carburetor Type
Lubrication: Seperate Pump (engine) splash type (transmission)
Ignition: PGM-CDI
Starting: Kick
Max Power: 40hp @ 9000 rpm
Max Torque: 3.3 kgf-m @ 8000 rpm
Clutch: Multi-plate, coil spring
Transmission: Constant Mesh 6-speed
Final Drive: Chain
Frame: Aluminum tube type frame
Front Suspension: 41mm Telescopic air valve semi-adjustable
Rear Suspension: Rear: Pro-Link Single shock swingarm non-adjustable
Front Brakes: 2x discs 2 piston calipers
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 110/70-17 54 H
Rear Tyre: 150/60-R17 66 H
Rake: 23 degrees15
Trail: 85 mm / 3.3 in
Dimensions: Length 1970 mm / 77.5 in Width 650 mm / 25.5 in Height 1045 mm / 41.1 in
Wheelbase: 1340 mm / 52.7 in
Seat Height: 770 mm / 30.3 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 138 kg / 304.2 lbs
Wet Weight: 157 kg / 346 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Review: Type I / Type II / Technical

The post Honda NSR 250SP Rothmans Replica MC28 (1994) appeared first on MotorcycleSpecifications.com.

]]>