Honda Archives - MotorcycleSpecifications.com

Honda XL 600V Transalp (1996)

admin — Sat, 15 Apr 2023 18:56:17 +0000

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It has a four-stroke, 52-degree V-twin, SOHC engine with a capacity of 583 cc and a liquid cooling system. The compression ratio is 9.2:1 and it has 3 valves per cylinder. The bike features a 2x 32mm Keihin carburetor CV induction system and an electronic double CD-I ignition. The generator produces 0.310 kW of power at 5000 rpm and has a 12V/12Ah battery.

The bike also comes with an AC-generator, electrical starter, and electronic safeguard on the side stand. It has a 5-speed transmission with a chain final drive and a maximum power output of 55 hp at 8000 rpm. The bike has a single downtube with double loop cradle of rectangular section frame and 41mm telescopic hydraulic forks for the front suspension. The rear suspension features a Pro-link monoshock with a rear wheel travel of 187 mm.

The front brake is a single 276 mm disc with a 2-piston caliper while the rear brake is a single 240 mm disc with a 1-piston caliper. The bike has a length of 2260 mm, a width of 865 mm, and a height of 905 mm. The wheelbase is 1505 mm, and the seat height is 850 mm with a ground clearance of 195 mm. The dry weight of the bike is 183.0 kg, while the wet weight is 202.0 kg.

The fuel tank capacity is 18 litres, and it has an average fuel consumption of 18.3 km/lit. The bike has a top speed of 172.5 km/h and can reach 60-0 in 13.3 meters and 100-0 in 42.1 meters. The standing quarter-mile is achieved in 13.4 seconds at a speed of 152.8 km/h.

Technical specifications:

Make Model: Honda XL 600V Transalp

Year: 1996
Engine: Four stroke. 52oV-Twin, SOHC, 3 valves per cylinder
Capacity: 583 cc / 35.5 cu-in
Bore x Stroke: 75.0 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 9.2:1
Induction: 2x 32 mm Keihin Carburettor CV
Ignition: Electronic
Electrical: Electronical double CD-I ingnition; 12Vdc; 12V/12Ah battery; AC-generator; electrical starter; electronic safegard on side stand
Generator: 0.310 kW / 5000 rpm
Starting: Electric
Max Power: 55 hp / 41 kW @ 8000 rpm
Max Torque: 52.6 Nm / 38.8 ft-lb @ 6000 rpm
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st: 2.500 2nd: 1.722 3rd: 1.333 4th: 1.111 5th: 0.961
Frame: Single downtube with double loop cradle of rectangular section
Front Suspension: 41 mm Telescopic hydraulic forks
Front Wheel Travel: 200 mm / 7.8 in
Rear Suspension: Pro-link monoshock
Rear Wheel Travel: 187 mm / 7.4 in
Front Brakes: Single 276 mm disc 2 piston caliper
Rear Brakes: Single 240 mm disc 1 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dimensions: Length 2260 mm / 89.0 in Width 865 mm / 34.0 in Height 905 mm / 35.6 in
Wheelbase: 1505 mm / 59.2 in
Seat Height: 850 mm / 33.5 in
Ground Clearance: 195 mm / 7.7 in
Dry Weight: 183.0 kg / 404 lbs
Wet Weight: 202.0 kg / 445 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Consumption Average: 18.3 km/lit
Braking 60 – 0 / 100 – 0: 13.3 m / 42.1 m
Standing 1/4 Mile: 13.4 sec / 152.8 km/h
Top Speed: 172.5 km/h
Related Links: Technical / xrv.org.uk / blackbears.ru
Road Test: Motociclismo 1994

The post Honda XL 600V Transalp (1996) appeared first on MotorcycleSpecifications.com.

Honda CX650F (1984)

admin — Fri, 07 Apr 2023 15:35:57 +0000

The Honda CX 650E was a 1984 motorcycle powered by a four-stroke, 800 V-twin cylinder engine, with a capacity of 673 cc. It had a liquid-cooled cooling system and a compression ratio of 9.8:1. The bike had a maximum power of 64 hp at 8000 rpm and a maximum torque of 61 Nm at 6500 rpm. The clutch was wet, multi-plate, and had five speeds, with a final drive that was a shaft. The front suspension was air-assisted telescopic forks, while the rear suspension was Pro-link and air-adjustable preload. The front brakes had two 280mm discs, while the rear brakes had a single 280mm disc. The bike had a dry weight of 227 kg and a fuel capacity of 19 litres. The standing 1/4 mile for the bike was 13.5 seconds, and the top speed was 116 mph. The CX 650E had a consumption average of 45.5 mpg.

Technical specifications:

Make Model: Honda CX 650E

Year: 1984
Engine: Four stroke, longitudinal 800 V-twin cylinder, camshaft nestles at the base of the V between the cylinders. ,OHV, 4 valves per cylinder operated by pushrods
Capacity: 673 cc / 41.07 cu-in
Bore x Stroke: 82.5 x 63 mm
Cooling System: Liquid cooled
Compression Ratio: 9.8:1
Induction: 2x 39mm Keihin
Ignition: CDI
Starting: Electreic
Max Power: 64 hp / 47.7 kW @ 8000 rpm
Max Torque: 61 Nm / 45 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, 5-speed
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Air assisted telescopic forks
Rear Suspension: Pro-link, air adjustable preload
Front Brakes: 2x 280mm discs
Rear Brakes: Single 280mm disc
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Dry Weight: 227 kg / 500.4 lbs
Wet Weight: 235.0 kg / 518.1 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Consumption Average: 45.5 mpg
Standing 1/4 Mile: 13.5 sec / 99 mph
Top Speed: 116 mph

The post Honda CX650F (1984) appeared first on MotorcycleSpecifications.com.

Honda VFR1200 DCT (2016-17)

admin — Fri, 07 Apr 2023 15:21:59 +0000

The Honda VFR 1200FA is a motorcycle model produced between 2016 and 2017. It has a four-stroke engine with a capacity of 1237cc, a compression ratio of 12.0:1, and is liquid-cooled. The ignition is digital transistorized with electronic advance computerized control and has a spark plug type of IMR9E-9HES (NGK) or VUH27ES (DENSO). The motorcycle has a clutch operation that is hydraulic and a 6-speed transmission with two automatic modes and a manual mode. It has a final drive of a shaft and two disc brakes with a combined anti-lock braking system. The front suspension is an inverted telescopic fork with a 41mm HMAS cartridge-type, and the rear suspension is a Pro-Link HMAS gas shock with an adjustable spring preload. The motorcycle has a wheelbase of 1545mm and a seat height of 815mm. Its wet weight is 267kg, and its fuel capacity is 18.5 litres. The average consumption is 17.8km/lit, and it has a top speed of 251.2km/h.

Technical specifications:

Make Model: Honda VFR 1200FA

Year: 2016 – 17
Engine: Four stroke, 76 degrees V-4, SOHC, 4 valve per cylinder
Capacity: 1237 cc / 75.4 cu-in cc / 75.4 cu-in
Bore x Stroke: 81 x 60 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Induction: PGM-FI electronic injection
Ignition: Digital transistorized with electronic advance computerized control Ignition Timing: 6.4 degrees -10.4 degrees BTDC (idle speed) Sparkplug Type: IMR9E-9HES (NGK); VUH27ES (DENSO)
Spark Plug: IMR9E-9HES (NGK); VUH27ES (DENSO)
Starting: Electric
Max Power: 127 kW / 170 hp @ 10000 rpm
Max Torque: 129 Nm / 95.1 lb-ft @ 8750 rpm
Clutch: Wet, multiplate slipper type, Clutch Operation Hydraulic
Transmission: 6 speed with two automatic modes and manual mode
Final Drive: Shaft
Gear Ratio: 1 2.600 (39/15) 2nd 1.736 (33/19) 3rd 1.363 (30/22) 4th 1.160 (29/25) 5th 1.032 (32/31) 6th 0.939 (31/33)
Chassis Type: Double beam cast aluminum vacuum mold Geometry direction: 25.5 degrees, 101 mm forward Swingarm: single-arm aluminum driveshaft
Front Suspension: Inverted telescopic fork 41 mm HMAS cartridge-type with adjustable spring preload without positions,
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Pro-Link HMAS gas shock, adjustable spring preload 25 positions,
Rear Wheel Travel: 120 mm / 4.3 in
Front Brakes: 2x Hydraulic discs 320mm floating, 6-piston radial calipers, Combined-ABS
Rear Brakes: Single hydraulic 276mm disc 2 piston caliper, Combined-ABS
Front Tyre: 120/70 ZR17M / C (58W)
Rear Tyre: 190/55 ZR17M / C (75W)
Rake (Caster angle): 25.3 degrees
Trail: 101.mm / 4 in
Dimensions: Length 2244 mm / 88.3 in Width 752 mm / 29.6 in Height 1222 mm / 48.1 in
Wheelbase: 1545 mm / 60.8 in
Seat Height: 815 mm / 31.9 in
Wet Weight: 267 kg / 613 lbs
Fuel Capacity: 18.5 Litres / 5.0 US gal
Average Consumption: 17.8 km/lit
Standing 1/4 Mile: 10.8 sec
Top Speed: 251.2 km/h / 156 mph

The post Honda VFR1200 DCT (2016-17) appeared first on MotorcycleSpecifications.com.

Honda CBR 600RR (2017)

admin — Fri, 07 Apr 2023 15:12:04 +0000

The Honda CBR 600RR from 2017 has a four stroke, transverse four cylinder, DOHC engine with a capacity of 599cc. Its compression ratio is 12.2:1 and it has a liquid cooling system with wet sump lubrication. The induction is dual stage fuel injection with 40mm throttle bodies and Denso 12-hole injectors. The ignition is computer-controlled digital transistorized with electronic advance and an independent four-cylinder 3D-mapped computer control. The motorcycle has a maximum power of 118 hp / 88.1 kW at 13500 rpm and a maximum torque of 66 Nm / 48.6 lb-ft at 11250 rpm. The clutch is cable-operated multiplate wet and it has close-ratio 6 speed transmission with #525 O-ring chain final drive. Its frame is aluminum twin spar and the suspension includes a 41mm inverted Big Piston Fork and a Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability. The front brakes consist of 2x 310mm discs with 4 piston calipers while the rear brake is a single 220mm disc with a 1 piston caliper. The motorcycle has a fuel capacity of 18.2 liters / 4.8 gal, a dry weight of 156.5 kg / 345 lbs and a wet weight of 186 kg / 410 lbs. Its seat height is 820mm / 32.3 in, wheelbase is 1369 mm / 53.9 in, and ground clearance of 135 mm / 5.3 in.

Technical specifications:

Make Model: Honda CBR 600RR

Year: 2017
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 599 cc / 36.5 cu-in cc / 36.5 cu-in
Bore x Stroke: 67 x 42.5 mm
Compression Ratio: 12.2:1
Cooling System: Liquid cooled
Lubrication: Wet sump
Engine Oil: Synthetic, 10W/40
Induction: Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors
Ignition: Computer-controlled digital transistorized with electronic advance and independent four-cylinder 3D-mapped computer control.
Spark Plug: NGK, IMR9C-9H
Starting: Electric
Max Power: 118 hp / 88.1 kW @ 13500 rpm
Max Torque: 66 Nm / 48.6 lb-ft @ 11250 rpm
Clutch: Cable-operated multiplate wet clutch.
Transmission: Close-ratio 6 Speed
Final Drive: #525 O-ring chain
Frame: Aluminium, twin spar
Front Suspension: 41mm inverted Big Piston Fork with spring preload, rebound and compression damping adjustability
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability
Rear Wheel Travel: 129.5 mm / 5.1 ib
Front Brakes: 2x 310mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Rake: 23.5 degrees
Trail: 97.7mm / 3.9 in
Seat Height: 820 mm / 32.3 in
Wheelbase: 1369 mm / 53.9 in
Ground clearance:: 135 mm / 5.3 in
Dry Weight: 156.5 kg / 345 lbs
Wet Weight: 186 kg / 410 lbs
Fuel Capacity: 18.2 liters / 4.8 gal

The post Honda CBR 600RR (2017) appeared first on MotorcycleSpecifications.com.

Honda C100 Cub (1958-67)

admin — Fri, 07 Apr 2023 15:08:04 +0000

The Honda C100 Super Cub was a motorcycle model produced from 1958 to 1967. It featured a 49cc, single cylinder, 4-stroke, OHC engine with a maximum power of 3.4 kW at 9500 rpm and maximum torque of 3.2 Nm at 8500 rpm. The cooling system was air-cooled and it had a wet, semi-automatic clutch with a three-speed transmission and chain final drive. The frame was made of pressed steel underbone and it had a leading link front suspension and swingarm rear suspension with drum brakes on both wheels. The wheels were steel with laced wire spokes and had dimensions of 2.25 x 17 inches. The bike had a top speed of 69 km/h and weighed 65 kg with a fuel capacity of 3.0 L. Its dimensions were 1780 mm in length, 570 mm in width, and 610 mm in height with a wheelbase of 1180 mm. The C100 Super Cub was popular for its reliability and ease of use, and it helped to establish Honda as a major player in the motorcycle industry.

Technical specifications:

Make Model: Honda C100 Super Cub

Year: 1958 – 67
Engine: Single cylinder, 4-stroke, OHC
Capacity: 49 cc / 3.0 cu in
Bore x Stroke: 40 x 39 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Exhaust: One-into one
Ignition: Flywheel magneto
Starting: Kick
Max Power: 3.4 kW / 4.5 hp @ 9500 rpm
Max Torque: 3.2 Nm / 0.33 kgf-m / 2.4 lb-ft @ 8500 rpm
Clutch: Wet, semi-automatic
Transmission: 3-Speed
Final Drive: Chain
Frame: Pressed steel underbone
Front Suspension: Leading link
Front Wheel Travel: 56 mm / 2.2 in
Rear Suspension: Swing arm
Rear Wheel Travel: 61 mm / 2.4 in
Front Brakes: Expanding drum, 110 mm
Rear Brakes: Expanding drum, 110 mm
Wheels: Steel, laced wire spokes
Front Wheel: 2.25 x 17 in
Rear Wheel: 2.25 x 17 in
Dimensions: Length: 1780 mm / 70.1 in Width: 570 mm / 22.6 in Height: 610 mm / 24.0 in
Wheelbase: 1180 mm / 46.5 in
Dry Weight: 65 kg / 143 lbs
Fuel Capacity: 3.0 L / 0.79 US gal
Top Speed: 69 km/h / 43 mph

The post Honda C100 Cub (1958-67) appeared first on MotorcycleSpecifications.com.

Honda XRV750 Africa Twin (1992)

admin — Fri, 07 Apr 2023 14:42:04 +0000

The Honda XRV750 Africa Twin is a 1992 motorcycle with a four-stroke, longitudinal 52-degree V-twin engine and a capacity of 742cc/45.2 cu-in. It has a 81 x 72 mm bore x stroke and a compression ratio of 9.0:1. The cooling system is liquid cooled with 2.03L of coolant, while the lubrication system is a wet sump. The engine oil capacity ranges from 2.4L to 3.2L depending on maintenance. The bike has a TCI (Transistor Controlled Ignition) ignition with a 12V-12AH battery and a 0.36kW/5,000min generator. Its maximum power is 62 hp/45.3 kW @ 7500 rpm and its maximum torque is 62.7 Nm/6.4 kgf-m @ 6000 rpm. The clutch is a wet, multiple disc, cable-operated mechanism, and the bike has a 5-speed transmission and chain final drive. The frame is a single downtube with a double-loop cradle and rectangular section made of steel. The front suspension is a 43mm air-assisted telescopic fork with 220mm of travel, while the rear suspension is a Pro-Link with 214mm of travel and preload and compression damping adjustment. The front and rear brakes are 2x 276 mm discs with 2-piston calipers and a single 256 mm disc with a 1-piston caliper, respectively. The bike has an 880mm/34.6in seat height, a dry weight of 185kg/407.8lbs, and a fuel capacity of 23 litres/5.2 gallons. Its average fuel consumption is 16.8 km/lit, and its top speed is 177.7 km/h.

Technical specifications:

Make Model: Honda XRV 750 Africa Twin

Year: 1992
Engine: Four stroke, Longitudinal 52 degreesV-twin. SOHC, 3 Valve per cylinder
Capacity: 742 cc / 45.2 cu-in
Bore x Stroke: 81 x 72 mm
Compression Ratio: 9.0:1
Valve clearances (COLD engine): Intake valves: 0.13 to 0.17 mm Exhaust valves: 0.18 to 0.22 mm
Cooling System: Liquid cooled, 2.03 l (2.15 US qt, 1.79 Imp qt)
Lubrication: Wet sump
Engine Oil: (After draining) 2.4 l (2.5 US qt, 2.1 Imp qt) (After draining and oil filter change) 2.6 l (2.7 US qt, 2.3 Imp qt) (After disassembly) 3.2 l (3.4 US qt, 2.8 Imp qt)
Induction: 2x 38mm Flat side CV
Idle speed: 1,200 +/- 100 min ^1(rpm) …E,G,F,ED,AR,II G 1,200 +/- 50 min ^1(rpm) ..SW
Ignition: TCI (Transistor Controlled Ignition)
Battery: 12V – 12AH
Generator: 0.36kW/5,000min ^1(rpm)
Spark Plug: Standard: DPR8EA9 (NGK) or X24EPR – U9 (DENSO) Cold climate (Below 5 degreesC, 41 degreesF): DPR7EA9 (NGK) or X22EPR – U9 (DENSO) For extended high speed riding: DPR9EA9 (NGK) or X27EPR – U9 (DENSO)
Spark Plug Gap: 0.80 – 0.90 mm (0.031 – 0.035 in)
Starting: Electric
Max Power: 62 hp / 45.3 kW @ 7500 rpm
Max Torque: 62.7 Nm / 6.4 kgf-m @ 6000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Primary Reduction: 1.763
Gear Ratio: 1st: 3.083 / 2nd: 2.062 / 3rd: 1.550 / 4th: 1.272 / 5th: 1.083
Final Reduction: 2.812 …E,G,F,SW,ED,II G 2.687 …AR
Frame: Single downtube with double-loop cradle, rectangular section, steel
Front Suspension: 43 mm air-assisted telescopic fork
Front Wheel Travel: 220 mm / 8.6 in
Rear Suspension: Pro-Link 214 mm wheel travel with preload and compression damping adjustment
Rear Wheel Travel: 214 mm / 8.4 in
Front Brakes: 2x 276 mm discs 2 piston calipers
Rear Brakes: Single 256 mm disc 1 piston caliper
Rim Front: 21-inch spoke, aluminium rim
Rim Rear: 17-inch spoke, aluminium rim
Front Tyre: 90/90-21 54S
Rear Tyre: 130/90-17 65S
Rake: 27 degrees
Trail: 133 mm / 5.2 in
Dimensions: Length 2315 mm / 84 in Width 895 mm / 35.2 in Height 1420 mm / 55.9 in
Wheelbase: 1565 mm / 61.6 in
Seat Height: 880 mm / 34.6 in
Dry Weight: 185 Kg / 407.8 lbs
Wet Weight: 198 kg / 436.5 lbs
Fuel Capacity: 23 Litres / 5.2 gal
Reserve: 5.1 Litres / 1.35 gal
Consumption average: 16.8 km/lit
Braking 60 – 0 / 100 – 0: 13.2 m / 40.4 m
Standing 1/4 Mile: 13.4 sec / 154.5 km/h
Top Speed: 177.7 km/h
Manual: Colours and codes lights & Torque settingss / .blackbears.ru

The post Honda XRV750 Africa Twin (1992) appeared first on MotorcycleSpecifications.com.

Honda CMX 250 Rebel (2010-12)

admin — Fri, 07 Apr 2023 14:34:08 +0000

The Honda CMX 250 Rebel motorcycle was produced from 2010 to 2012. Its engine is a four-stroke, parallel twin-cylinder with a capacity of 234cc and a compression ratio of 9.2:1. It is equipped with a wet sump lubrication system, single 26mm diaphragm-type constant-velocity carburetor, and digital CDI ignition. It has a maximum power output of 18.5 hp at 8250 rpm and a maximum torque of 18.6 Nm at 5500 rpm, with a 5-speed transmission and chain final drive. The front suspension is a 33mm telescopic fork, and the rear suspension is dual shocks with five-position spring preload adjustability. The front brakes consist of a single 240mm disc with a 2 piston caliper, while the rear brake is a 230mm drum. The motorcycle has a 30-degree rake, 113mm trail, and a wheelbase of 1450mm. The seat height is 676mm, and it weighs 141kg with a fuel capacity of 10 litres.

Technical specifications:

Make Model: Honda CMX 250 Rebel

Year: 2010-12
Engine: Four stroke, parallel twin cylinder. SOHC. 2 valve per cylinder
Capacity: 234 cc / 14.3 cu-in
Bore x Stroke: 53 x 53 mm
Cooling System: Air cooled
Compression Ratio: 9.2;1
Lubrication: Wet sump
Induction: Single 26mm diaphragm-type constant-velocity (CV) carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 18.5 hp / 13.5 kW @ 8250 rpm
Max Torque: 18.6 Nm / @ 5500 rpm
Clutch: Wet, cable operated
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 33mm Telescopic fork
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Dual shocks with five-position spring preload adjustability
Rear Wheel Travel: 74 mm / 2.9 in
Front Brakes: Single 240mm discs 2 piston caliper
Rear Brakes: 230mm Drum
Front Tyre: 3.00 -18
Rear Tyre: 130/90 -15
Rake: 30 degrees
Trail: 113 mm / 4.4 in
Wheelbase: 1450 mm / 57.1 in
Seat Height: 676 mm / 26.6 in
Dry Weight: 141 kg / 331 lbs
Fuel Capacity: 10 Litres / 2.6 gal

The post Honda CMX 250 Rebel (2010-12) appeared first on MotorcycleSpecifications.com.

Honda XR 250L (2002)

admin — Fri, 07 Apr 2023 14:32:06 +0000

The Honda XR 250L motorcycle was manufactured in the year 2002, with a four-stroke, single cylinder SOHC, four-valve engine that is 249cc in capacity. The engine has a bore and stroke of 73 x 59.5mm respectively, with an air cooling system and 9.3:1 compression ratio. The bike has a 30mm Keihin induction and CDI ignition system, and is powered by a YTX4L-BS 12-volt battery, starting with a kick. It has a maximum power output of 30hp / 21.9 kW at 9000 rpm and a maximum torque of 24.5 Nm / 18.7 ft-lbs at 7500 rpm. The bike’s transmission is a six-speed system with a chain final drive, and gear ratios of 2.769: 1, 1.941: 1, 1.45: 1, 1.13: 1, 0.923: 1, and 0.786: 1 for first through sixth gears respectively. The frame is a semi-double cradle with a single downtube, and the front suspension is a 43mm air-adjustable leading-axle Showa cartridge fork with 16-position compression damping adjustability while the back has a Pro-Link Showa single shock with spring preload, 20-position compression and 20-position rebound damping adjustability. The bike’s front and rear brakes are 240mm and 220mm discs with two and one piston caliper respectively. The front and back tyres are measured 80/100-21 and 110/100-18, with a rake of 26 degrees, 105mm trail, 1411mm wheelbase, seat height of 883mm, ground clearance of 300mm, and a dry weight of 118kg / 260 lbs, and wet weight of 132kg / 291 lbs. Its maximum fuel capacity is 9 litres / 2.3 gallons.

Technical specifications:

Make Model: Honda XR 250L

Year: 2002-
Engine: Four-stroke, single cylinder SOHC, 4 valve
Capacity: 249 cc / 15.1 cu-in
Bore x Stroke: 73 x 59.5 mm
Cooling System: Air cooled
Compression Ratio: 9.3:1
Induction: 30 mm Keihin
Ignition: CDI
Spark Plug: NGK DPR8z
Battery: YTX4L-BS -12 volt
Starting: Kick
Max Power: 30 hp / 21.9 kW @ 9000 rpm
Max Torque: 24.5 Nm / 18.7 ft. lbs @ 7500 rpm
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.769: 1 2nd 1.941: 1 3rd 1.45: 1 4th 1.13: 1 5th 0.923: 1 6th 0.786: 1
Frame: Semi-double cradle, single downtube
Front Suspension: 43 mm air-adjustable leading-axle Showa cartridge fork with 16-position compression damping adjustability
Front Wheel Travel: 260 mm / 10.2 in
Rear Suspension: Pro-Link Showa single shock with spring preload, 20-position compression and 20-position rebound damping adjustability
Rear Wheel Travel: 260 mm / 10.2 in
Front Brakes: Single 240 mm disc 2 piston caliper
Rear Brakes: Single 220 mm disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Rake: 26 degrees
Trail: 105 mm / 4.14 in
Wheelbase: 1411 mm / 56.5 in
Seat Height: 883 mm / 34.5 in
Ground Clearance: 300 mm / 11.8 in
Dry Weight: 118 kg / 260 lbs
Wet Weight: 132 kg / 291 lbs
Fuel Capacity: 9 Litres / 2.3 gal

The post Honda XR 250L (2002) appeared first on MotorcycleSpecifications.com.

Honda CB400 Bol D (2014-15)

admin — Fri, 07 Apr 2023 14:18:00 +0000

The Honda CB400 Super Bol D’or is a motorcycle produced in the years 2014-15. It has a four-stroke, transverse four-cylinder engine with a capacity of 399cc and a liquid-cooled cooling system. The motorcycle has a compression ratio of 11.3:1 and uses PGM-FI fuel injection induction with CDI ignition. It has a maximum power of 53 hp at 11,000 rpm and a maximum torque of 40.18 Nm at 7500 rpm, a wet, multiple disc, cable-operated clutch, and a six-speed transmission with a chain final drive. The motorcycle has a high-tension steel cradle frame, telescopic forks for the front suspension, and a single shock for the rear suspension. Its front brakes consist of dual 296mm discs with four-piston calipers, while the rear brake is a single 240mm disc with a two-piston caliper. The motorcycle’s front and rear tires are 120/60 ZR17 and 160/60 ZR17, respectively, with a rake of 25 degrees 5 and a trail of 90 mm. It has a seat height of 755 mm, ground clearance of 130 mm, and a dry weight of 175.0 kg. With an 18-liter fuel capacity, the Honda CB400 Super Bol D’or can run for extended periods.

Technical specifications:

Make Model: Honda CB 400 Super Bol D’or

Year: 2014-15
Engine: Four stroke, transverse four cylinders, DOHC, 4 valve per cylinder
Capacity: 399 cc / 24.3 cu in
Bore x Stroke: 55 x 42 mm
Cooling System: Liquid cooled,
Compression Ratio: 11.3:1
Induction: PGM-FI fuel injection
Ignition: CDI
Starting: Electric
Max Power: 53 hp / 38.6 kW @ 11000 rpm
Max Torque: 40.18 / Nm @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1 st 3.307 2nd 2.294 3rd 1.750 4th 1.421 5th1.240 6th 1.130
Frame: High-tension steel cradle frame
Front Suspension: Telescopic forks
Rear Suspension: Single shock
Turning Circle: 2.6 m / 8 ft 6 in
Front Brakes: 2x 296mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Rake: 25 degrees 5
Trail: 90 mm
Dimensions: Llength 2080 mm / 81.8 inWidth 725 mm / 45.6 inHeight 1160 mm / 29.3 in
Wheelbase: 1,410 mm / 55.5 in
Seat Height: 755 mm / 29.7 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 175.0 kg / 385.8 lbs
Wet Weight: 198 kg / 437 lbs
Fuel Capacity: 18 Litres / 4.75 gal

The post Honda CB400 Bol D (2014-15) appeared first on MotorcycleSpecifications.com.

Honda CB400 Bol D (2012-13)

admin — Fri, 07 Apr 2023 14:14:09 +0000

The Honda CB 400 Super Bol D’or was produced from 2012-2013 and features a liquid-cooled, four-stroke engine with transverse four cylinders and DOHC. It has a capacity of 399 cc and boasts fuel injection with CDI ignition. The motorcycle has a maximum power of 53 hp at 11000 rpm and a torque of 40.18 Nm at 7500 rpm. It has a six-speed transmission and a chain final drive. The high-tension steel cradle frame is supported by telescopic forks and a single shock rear suspension. The motorcycle has a turning circle of 2.6 m and front brakes consisting of 2x 296mm discs with 4-piston calipers, while the rear brake is a single 240 mm disc with 2-piston calipers. It has a wheelbase of 1,410 mm and a seat height of 755 mm. The dry weight of the motorcycle is 175 kg with a wet weight of 198 kg. The fuel capacity is 18 liters.

Technical specifications:

Make Model: Honda CB 400 Super Bol D’or

Year: 2012-13
Engine: Four stroke, transverse four cylinders, DOHC, 4 valve per cylinder
Capacity: 399 cc / 24.3 cu in
Bore x Stroke: 55 x 42 mm
Cooling System: Liquid cooled,
Compression Ratio: 11.3:1
Induction: PGM-FI fuel injection
Ignition: CDI
Starting: Electric
Max Power: 53 hp / 38.6 kW @ 11000 rpm
Max Torque: 40.18 / Nm @ 7500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1 st 3.307 2nd 2.294 3rd 1.750 4th 1.421 5th1.240 6th 1.130
Frame: High-tension steel cradle frame
Front Suspension: Telescopic forks
Rear Suspension: Single shock
Turning Circle: 2.6 m / 8 ft 6 in
Front Brakes: 2x 296mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Rake: 25 degrees 5
Trail: 90 mm
Dimensions: Llength 2080 mm / 81.8 inWidth 725 mm / 45.6 inHeight 1160 mm / 29.3 in
Wheelbase: 1,410 mm / 55.5 in
Seat Height: 755 mm / 29.7 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 175.0 kg / 385.8 lbs
Wet Weight: 198 kg / 437 lbs
Fuel Capacity: 18 Litres / 4.75 gal

The post Honda CB400 Bol D (2012-13) appeared first on MotorcycleSpecifications.com.

Honda CBX 400F2 (1984-85)

admin — Fri, 07 Apr 2023 14:08:02 +0000

The Honda CBX 400F2 is a four-stroke transverse four-cylinder motorcycle that was produced from 1984 to 1985. The engine has a capacity of 399cc with a bore and stroke of 55 x 42mm and a compression ratio of 9.8:1. It features a 4x26mm Keihin induction system and CDI ignition. The bike has an electric starter with a maximum power output of 48hp at 10,500 rpm. The bike has a six-speed transmission with final drive via a chain. Suspension on the front consists of Kayaba forks with 35mm tubes and the rear has a single air shock system with a rear wheel travel of 103mm. Brakes consist of disc systems on both front and rear wheels with a standard tire size of 3.60 H18 front and 4.10 H18 rear. The motorcycle weighs 138kg and has a fuel capacity of 18 liters. Average fuel consumption is 46 miles per gallon, with the standing quarter mile taking 13.5 seconds at a speed of around 155km/h.

Technical specifications:

Make Model: Honda CBX 400F

Year: 1984-85
Engine: Four stroke, transverse four cylinder. DOHC, 4 valve per cylinder
Capacity: 399 cc / 24.3 cu-in
Bore x Stroke: 55 x 42 mm
Cooling System: Air cooled
Compression Ratio: 9.8:1
Induction: 4x 26mm Keihin
Ignition: CDI
Starting: Electric
Max Power: 48 hp / 35.7 kW @ 10500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Kayaba forks
Front Wheel Travel: 138 mm / 4.4 in
Rear Suspension: Single air shock
Rear Wheel Travel: 103 mm / 4.0 in
Front Brakes: Single 229mm disc
Rear Brakes: Single 229mm disc
Front Tyre: 3.60 H18
Rear Tyre: 4.10 H18
Dry Weight: 138 kg / 304.4 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Consumption Average: 46 mpg
Standing 1/4 Mile: 13.5 sec / 155 km/h

The post Honda CBX 400F2 (1984-85) appeared first on MotorcycleSpecifications.com.

Honda CBR 1000 RR (2019)

admin — Fri, 07 Apr 2023 14:06:03 +0000

The Honda CBR 1000RR Fireblade 2019 motorcycle has a four-stroke transverse four-cylinder engine with a 999cc capacity and chain-driven DOHC with 4 valves per cylinder. It has a compression ratio of 13.0:1 and a liquid cooling system with wet sump lubrication. The PGM-FI system with 48mm throttle bodies provides induction, while the digital transistorized ignites with electronic advance provides starting power. The bike has a six-speed transmission with a wet, multiplate, and diaphragm spring clutch, and it offers a 16T/43T chain final drive. The diamond aluminium composite twin-spar frame provides support, while the Big Piston Front Fork with preload, compression, and rebound adjustment provides a front suspension of Telescopic inverted fork with an inner tube diameter of 43mm. The Unit Pro-Link offers the back suspension with gas-charged HMAS damper featuring a 10-step preload and step less compression and rebound damping adjustment. The CBR has a maximum power and torque. The bike’s wheelbase spans 1405 mm and offers a wet weight of 195 kg. The 16-litre fuel capacity offers a seat height of 835mm, The 120/70ZR17 58W front tire and the 190/50ZR17 73W rear tire are equipped with 17xMT3.50 front rims and 17xMT6.00 rear rims. In terms of dimension, the bike is 2050 mm in length, 720 mm in width, and 1125 mm in height. The bike is also fitted with 2x320mm hydraulic disc front brakes with Tokico radial mounted calipers and high performance track ready pads, as well as a single 220mm rear brake with combined ABS and sintered metal pads with an electronically controlled ABS.

Technical specifications:

Make Model: Honda CBR 1000RR Fireblade

Year: 2019
Engine: Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.
Capacity: 999 cc / 60.9 in cc / 60.9 cu-in
Bore x Stroke: 76 x 55.1 mm
Compression Ratio: 13.0:1
Cooling System: Liquid cooling
Lubrication: Wet sump
Induction: PGM-FI; 48mm throttle bodies
Ignition: Digital transistorized w/ electronic advance
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Wet, multiplate with diaphragm spring
Transmission: Close-ratio six-speed (Quickshifter optional accessory)
Final Drive: 16T/43T; chain
Frame: Diamond; aluminium composite twin spar
Front Suspension: Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment
Rear Wheel Travel: 132 mm / 5.2 in
Front Brakes: 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear.
Rear Brakes: Single 220mm disc, Combined ABS and sintered metal pads
ABS: Electronically controlled ABS
Front Tyre: 120/70ZR17 58W
Rear Tyre: 190/50ZR17 73W
Rim Size Front: 17 x MT3.50
Rim Size Rear: 17 x MT6.00
Rake (Caster Angle): 23 degrees2
Trail: 96.2 mm / 3.8 in
Dimensions: Length 205 mm / 81.7 in Width 720 mm / 32.3 in Height 1125 mm / 44.7 in
Wheelbase: 1405 mm / 55.3 in
Seat Height: 8352 mm / 32.7 in
Wet Weight: 195 kg / 430 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Honda CBR 1000 RR (2019) appeared first on MotorcycleSpecifications.com.

Honda CRF 230M (2009)

admin — Fri, 07 Apr 2023 13:46:00 +0000

The Honda CRF 230M is a motorcycle that was released in 2009 with a four-stroke single-cylinder, SOHC 4 valves engine and a capacity of 223 cc. It has a liquid-cooled cooling system and a compression ratio of 9.0:1 with wet sump lubrication. It uses a single 30mm CV carb for induction and ignition is done through CD with electronic advance and lighting coil. The spark plug used is NGK, DPR8EA-9. The motorcycle can be started by electric and kick. The maximum power output is 18.6 hp at 8000 rpm and the maximum torque is 18.8 Nm at 6000 rpm. The bike uses a wet, multiple discs, cable operated clutch and has a 6-speed transmission with a #520 O-ring-sealed chain final drive. The frame is a steel, single cradle frame with a 37mm leading-axle Showa fork for the front suspension and a Pro-link Showa single shock with adjustable spring preload for the rear suspension. The bike has a front single 240mm disc 2 piston caliper and a rear single 220mm disc with a 110/70-17 front tire and a 130/70-17 rear tire. The wheelbase is 1340mm and the seat height is 805mm. The dry weight of the motorcycle is 113kg and it has a fuel capacity of 8.6 litres.

Technical specifications:

Make Model: Honda CRF 230M

Year: 2009
Engine: Four stroke single cylinder, SOHC 4 valves
Engine: Four stroke single cylinder, SOHC, 4 valves
Capacity: 223 cc / 13.6 cu-in
Bore x Stroke: 65.5 x 66.2mm
Cooling System: Liquid cooled
Compression Ratio: 9.0:1
Lubrication: Wet sump
Induction: Single 30 mm CV carb
Ignition: CD with electronic advance and lighting coil
Spark Plug: NGK, DPR8EA-9
Starting: Electric & Kick
Max Power: 18.6 hp / 13.7 kW @ 8000 rpm
Max Torque: 18.8 Nm / 1.92 kg-m @ 6000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: #520 O-ring-sealed chain
Frame: Steel, Single cradle frame
Front Suspension: 37mm leading-axle Showa (R) fork
Front Wheel Travel: 228 mm / 9.5 in
Rear Suspension: Pro-link Showa (R) single shock with adjustable spring preload
Rear Wheel Travel: 130 mm / 6.3 in
Front Brakes: Single 240mm disc 2 piston caliper
Rear Brakes: Single 220mm disc
Front Tyre: 110/70-17
Rear Tyre: 130/70-17
Wheelbase: 1340 mm / 52.7 in
Seat Height: 805 mm / 31.7 in
Dry Weight: 113 kg / 249 lbs
Fuel Capacity: 8.6 Litres / 2.27 gal

The post Honda CRF 230M (2009) appeared first on MotorcycleSpecifications.com.

Honda XL250S (1978-79)

admin — Fri, 07 Apr 2023 13:44:00 +0000

The Honda XL250S is a single-cylinder, four-stroke motorcycle produced from 1978 to 1979. The engine has a capacity of 249cc, with a bore x stroke of 74 x 57.8 mm and a compression ratio of 9.1:1. It has a 28mm Keihin induction and an electronic ignition, starting with a kick. The maximum power output is 20.2 hp at 7500rpm, with a maximum torque of 19.6 Nm at 8000rpm. It has a wet multi-plate clutch and a five-speed transmission with a final chain drive. The front suspension has oil damper telescopic forks, while the rear suspension is a swinging fork. The front and rear brakes are drums, with the front tire measuring 3.00-23 and the rear tire measuring 4.60-18. The bike weighs 118 kg dry and 132 kg wet, with a fuel capacity of 9.5 liters. The seat height is 848 mm, and the bike has a length of 2174mm, a width of 873.7 mm, and a height of 1183 mm. It was tested in the Bike magazine Group Test in 1978.

Technical specifications:

Make Model: Honda XL250S

Year: 1978-79
Engine: Four stroke, single cylinder, SOHC, 4 valve
Capacity: 249 cc / 15.1 cu-in
Bore x Stroke: 74 x 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.1:1
Induction: 1x 28mm Keihin
Ignition: Electronic
Starting: Kick
Max Power: 20.2 hp / 15 kW @ 7500rpm
Max Torque: 19.6 Nm / 14.5 lb ft @ 8000 rpm
Clutch: Wet multi-plate
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 25.2, 2nd 16.65, 3rd 12.37, 4th 9.99, 5th 8.1.
Front Suspension: Oil damper telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 155mm Drum
Rear Brakes: 140mm Drum
Front Tyre: 3.00 -23
Rear Tyre: 4.60 -18
Dimensions: Length 2174 mm / 85.6 in Width 873.7 mm / 34.4 in Height 1183 mm / 46. 6in
Wheelbase: 1389 mm / 54.7 in
Seat Height: 848 mm / 33.4 in
Dry Weight: 118 kg / 260 lbs
Wet Weight: 132 kg / 291 lbs
Fuel Capacity: 9.5 Litres / 2.6 US gal
Road Test: Bike magazine Group Test 1978

The post Honda XL250S (1978-79) appeared first on MotorcycleSpecifications.com.

Honda XR 600R (1997)

admin — Fri, 07 Apr 2023 13:28:58 +0000

The Honda XR 600R is a motorcycle model from 1997 that has a four-stroke, single-cylinder engine with a capacity of 591cc. The engine sports 4 valves RFVC and is air-cooled with a compression ratio of 9.0:1. The transmission consists of five gears and the final drive is a #520 O-ring-sealed chain. The motorcycle has a maximum power of 46 hp at 6000 rpm and a torque of 51.9 Nm at 5500 rpm. The bike has a front suspension with an air-adjustable leading-axle Showa cartridge fork which provides eight-position compression damping adjustability. The bike’s rear suspension has a Pro-Link single Showa shock with spring preload, 20-position compression, and 20-position rebound damping adjustability. The bike has a seat height of 955.0 mm, a ground clearance of 345.5 mm, and a dry weight of 134 kg. The motorcycle has a top speed of 143.2 km/h and a fuel capacity of 10.5 litres.

Technical specifications:

Make Model: Honda XR 600R

Year: 1997
Engine: Four stroke, single cylinder, SOHC, 4 valve RFVC
Capacity: 591 cc / 36.0 cu-in
Bore x Stroke: 97 x 80 mm
Compression Ratio: 9.0:1
Cooling System: Air cooled
Induction: 39 mm PD type
Ignition: Solid-state CDI
Starting: Kick
Max Power: 46 hp / 33.5 kW @ 6000 rpm
Max Torque: 51.9 Nm / 38.2 ft-lb @ 5500 rpm
Transmission: 5 Speed
Final Drive: #520 O-ring-sealed chain; 14T/48T
Front Suspension: 43 mm air-adjustable leading-axle Showa cartridge fork with eight-position compression damping adjustability
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Pro-Link single Showa shock with spring preload, 20-position compression and 20-position rebound damping adjustability
Rear Wheel Travel: 280 mm / 11.0 in
Front Brakes: Single 256 mm disc 2 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Wheelbase: 1455.4 mm / 57.3 in
Seat Height: 955.0 mm / 37.6 in
Ground Clearance: 345.5 mm / 13.6 in
Dry Weight: 134 kg / 295.5 lbs
Wet Weight: 146 kg / 321.9 lbs
Fuel Capacity: 10.5 Litres / 2.6 US gal
Standing 1/4 Mile: 14.6 sec / 134.5 km/h
Top Speed: 143.2 km/h

The post Honda XR 600R (1997) appeared first on MotorcycleSpecifications.com.

Honda CBR1000RR Fireblade (2013)

admin — Fri, 07 Apr 2023 13:19:00 +0000

The Honda CBR1000RR Fireblade Repsol motorcycle was released in 2013, with a four-stroke, DOHC, four-cylinder engine that has a capacity of 998cc. It has a maximum power of 175.6hp at 12,000rpm and maximum torque of 115Nm at 8,500rpm. The transmission is a six-speed with a #530 O-ring sealed chain final drive. The frame is a diamond; aluminum composite twin-spar, with 43mm inverted HMAS cartridge-type telescopic fork front suspension and gas-charged HMAS damper rear suspension. The front brakes have two 320mm discs with four-piston calipers, combined ABS and sintered metal pads, while the rear brake has a single 220mm disc with combined ABS and sintered metal pads. The front and rear wheel sizes are 17 x MT3.50 and 17 x MT6.00, respectively. It has a dry weight of 173 kg and a fuel capacity of 17.7 liters. The standing 1/4 mile time is 10.3 seconds and the top speed is 287.1 km/h.

Technical specifications:

Make Model: Honda CBR 1000RR Fireblade Repsol

Year: 2013
Engine: Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 998 cc / 60.9 cu-in
Bore x Stroke: 76 x 55.1 mm
Compression Ratio: 12.3:1
Cooling System: Liquid cooling
Lubrication: Wet sump
Engine Oil: Synthetic, 10W/40
Induction: PGM-DSFI electronic fuel injection 46mm Throttle Bore
Ignition: Computer-controlled digital transistorised with electronic advance
Spark Plug: NGK, IMR9C-9HES
Starting: Electric
Max Power: 175.6 hp / 131.0 kW @ 12000 rpm
Max Torque: 115 Nm / 11.73 kg-m @ 8500 rpm
Clutch: Wet, multiplate with diaphragm spring
Transmission: 6 Speed
Final Drive: #530 O-ring – sealed chain
Gear Ratio: 1st 2.286 (32/14) / 2nd 1.778 (32/18) / 3rd 1.500 (33/22) / 4th 1.333 (32/24) / 5th 1.214 (34/28) / 6th1.138 (33/29)
Frame: Diamond; aluminium composite twin-spar
Front Suspension: 43mm inverted HMAS cartridge-type telescopic fork with stepless preload, compression and rebound adjustment,
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment,
Rear Wheel Travel: 135 mm / 5.4 in
Front Brakes: 2x 320mm discs 4 piston calipers, Combined ABS and sintered metal pads
Rear Brakes: Single 220mm disc, Combined ABS and sintered metal pads
Front Tyre: 120/70ZR-17
Rear Tyre: 190/50ZR-17
Rim Size Front: 17 x MT3.50
Rim Size Rear: 17 x MT6.00
Rake (Caster Angle): 23.3 degrees
Trail: 96.2 mm / 3.8 in
Dimensions: Length 2077 mm / 81.5 in Width 685 mm / 26.9 in Height 1135 mm / 46.5 in
Wheelbase: 1407 mm / 55.4 in
Turning Radius: 3.2 m
Seat Height: 820 mm / 32.3 in
Dry Weight: 173 kg / 381.3 lbs
Wet Weight: 195 kg / 430 lbs (209 kg / 461.7 lbs C-ABS)
Fuel Capacity: 17.7 Liters / 4.7 gal
Reserve: 4 Litres
Standing 1/4 Mile: 10.3 sec
Top Speed: 287.1 km/h / 178.3 mph

The post Honda CBR1000RR Fireblade (2013) appeared first on MotorcycleSpecifications.com.

Honda NSS 300 Forza (2018)

admin — Fri, 07 Apr 2023 13:13:09 +0000

The Honda NSS 300 Forza (2018) motorcycle is equipped with a four-stroke, single-cylinder, 4-valve engine with a displacement of 279 cc and a compression ratio of 10.5:1. It has a liquid-cooled system and is powered by PGM-FI induction and TCI ignition. The motorcycle has a maximum power output of 24.8 hp at 7000 rpm and a maximum torque output of 27.2 Nm at 5750 rpm. The clutch is an automatic centrifugal clutch with a dry-type, while the transmission is a CVT, and the final drive is a V-belt. The front suspension is 33mm telescopic, and the rear suspension is twin shock. The front and rear brakes are both single-disc, with the front disc measuring 256mm and the rear measuring 240mm. The motorcycle has a rake of 26.5 degrees and a trail of 89mm/3.5in. The dimensions include a length of 2138mm/84.2in, a width of 755mm/29.7in, and a height of 1470mm/57.9in. The motorcycle has a wheelbase of 1508.7mm/59.4in and a seat height of 780mm/30.7in, with a ground clearance of 134.6mm/5.3in. The wet weight of the Honda NSS 300 Forza is 182kg/401.2lbs, and its fuel capacity is 11.5 liters/3.0 gallons.

Technical specifications:

Make Model: Honda NSS 300 Forza

Year: 2018
Engine: Four strike, single cylinder, 4 valve
Capacity: 279 cc / 17.0 CU-IN
Bore x Stroke: 72 x 68.5 mm
Cooling System: Liquid cooled
Compression Ratio: 10.5:1
Induction: PGM-FI
Ignition: TCI
Starting: Electric
Max Power: 24.8 hp / 18.4 [email protected] 7000 rpm
Max Torque: 27.2 Nm / 20.1 lb-ft. @ 5,750 rpm
Clutch: Automatic centrifugal clutch; dry type
Transmission: CVT
Final Drive: V-Belt
Front Suspension: 33mm Telescopic
Rear Suspension: Twin Shock
Front Brakes: Single 256mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 120/70R15
Rear Tyre: 140/70R14
Rake: 26.5 degrees
Trail: 89 mm / 3.5 in
Dimensions: Length 2138 mm / 84.2 in Width 755 mm / 29.7 in Height 1470 mm / 57.9 in
Wheelbase: 1508.7 mm / 59.4 in
Seat Height: 780 mm / 30.7 in
Ground Clearance: 134.6 mm / 5.3 in
Wet Weight: 182kg / 401.2 lbs
Fuel Capacity: 11.5 Litres / 3.0 gall

The post Honda NSS 300 Forza (2018) appeared first on MotorcycleSpecifications.com.

Honda CB450S (1987)

admin — Fri, 07 Apr 2023 13:09:04 +0000

The Honda CB 450S is a motorcycle produced in 1987. It has an air-cooled, parallel twin-cylinder, four-stroke engine with SOHC and three valves per cylinder. The engine also features a 360-degree crankshaft and twin balance-shafts, with a capacity of 447cc and a compression ratio of 9.1:1. The bike is equipped with 2x 30mm Keihin CV induction and CDI ignition, with an electric starting mechanism. It boasts a maximum power of 45 hp (32.8 kW) at 9000 rpm and a maximum torque of 33 Nm at 7500 rpm. The 6-speed transmission and chain drive system ensure smooth operation. The front suspension uses telescopic forks with a 124.5mm wheel travel, while the rear suspension employs a swing arm with 97mm wheel travel. The front brakes comprise of 2x 260mm disc with 2 piston calipers, while the rear brakes are a 140mm drum. The bike also features 100/90-18 front tyres and 110/90-18 rear tyres. The dry weight of the bike is 169 kg, and it has a fuel capacity of 17 litres.

Technical specifications:

Make Model: Honda CB 450S

Year: 1987
Engine: Air cooled, parallel twin cylinder, four stroke, SOHC, 3 valves per cylinder, 360 degrees crankshaft and twin balance-shafts
Capacity: 447
Bore x Stroke: 75 X 50.6mm
Compression Ratio: 9.1:1
Induction: 2x 30mm Keihin CV
Ignition / Starting: CDI / electric
Max Power: 45 hp 32.8 kW @ 9000 rpm
Max Torque: 33 Nm @ 7500 rpm
Transmission / Drive: 6 Speed / chain
Front Suspension: Telescopic forks 124.5mm wheel travel
Rear Suspension: Swing arm 97mm wheel travel
Front Brakes: 2x 260mm disc 2 piston calipers
Rear Brakes: 140mm Drum
Front Tyre: 100/90 – 18
Rear Tyre: 110/90 – 18
Dry Weight: 169 kg
Fuel Capacity: 17 Litres

The post Honda CB450S (1987) appeared first on MotorcycleSpecifications.com.

Honda VFR1200 DCT (2014-15)

admin — Fri, 07 Apr 2023 12:56:58 +0000

The Honda VFR1200F DCT motorcycle was made from 2014-15 and had a liquid cooled, four-stroke engine with electronic injection and digital transistorized ignition. It had a maximum power of 127 kW and maximum torque of 129 Nm. The clutch was wet and multiplate slipper type with hydraulic operation and the transmission had six speeds with two automatic modes and manual mode. The final drive was via a shaft and it had a double beam cast aluminum vacuum mold chassis geometry direction. The front suspension was an inverted telescopic fork and the rear suspension was a Pro-Link gas shock with adjustable spring preload. Front and rear brakes featured combined ABS and it had 120/70 ZR17M/C and 190/55 ZR17M/C front and rear tires respectively. Dimensions were 2244 mm in length, 752 mm in width, and 1222 mm in height with a wheelbase of 1545 mm and a seat height of 815 mm. The weight was 267 kg and it had an 18.5 litre fuel capacity. Its average consumption was 17.8 km per litre and it had a top speed of 251.2 km/h with a standing quarter mile time of 10.8 seconds.

Technical specifications:

Make Model: Honda VFR 1200F DCT

Year: 2014 – 15
Engine: Four stroke, 76 degrees V-4, SOHC, 4 valve per cylinder
Capacity: 1237 cc / 75.4 cu-in cc / 75.4 cu-in
Bore x Stroke: 81 x 60 mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Induction: PGM-FI electronic injection
Ignition: Digital transistorized with electronic advance computerized control Ignition Timing: 6.4 degrees -10.4 degrees BTDC (idle speed) Sparkplug Type: IMR9E-9HES (NGK); VUH27ES (DENSO)
Spark Plug: IMR9E-9HES (NGK); VUH27ES (DENSO)
Starting: Electric
Max Power: 127 kW / 170 hp @ 10000 rpm
Max Torque: 129 Nm /95.1 lb-ft @ 8750 rpm
Clutch: Wet, multiplate slipper type, Clutch Operation Hydraulic
Transmission: 6 speed with two automatic modes and manual mode
Final Drive: Shaft
Gear Ratio: 1 2.600 (39/15) 2nd 1.736 (33/19) 3rd 1.363 (30/22) 4th 1.160 (29/25) 5th 1.032 (32/31) 6th 0.939 (31/33)
Chassis Type: Double beam cast aluminum vacuum mold Geometry direction: 25.5 degrees, 101 mm forward Swingarm: single-arm aluminum driveshaft
Front Suspension: Inverted telescopic fork 41 mm HMAS cartridge-type with adjustable spring preload without positions,
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Pro-Link HMAS gas shock, adjustable spring preload 25 positions,
Rear Wheel Travel: 120 mm / 4.3 in
Front Brakes: 2x Hydraulic discs 320mm floating, 6-piston radial calipers, Combined-ABS
Rear Brakes: Single hydraulic 276mm disc 2 piston caliper, Combined-ABS
Front Tyre: 120/70 ZR17M / C (58W)
Rear Tyre: 190/55 ZR17M / C (75W)
Rake (Caster angle): 25.3 degrees
Trail: 101.mm / 4 in
Dimensions: Length 2244 mm / 88.3 in Width 752 mm / 29.6 in Height 1222 mm / 48.1 in
Wheelbase: 1545 mm / 60.8 in
Seat Height: 815 mm / 31.9 in
Wet Weight: 267 kg / 613 lbs
Fuel Capacity: 18.5 Litres / 5.0 US gal
Average Consumption: 17.8 km/lit
Standing 1/4 Mile: 10.8 sec
Top Speed: 251.2 km/h / 156 mph

The post Honda VFR1200 DCT (2014-15) appeared first on MotorcycleSpecifications.com.

Honda CB1300 (2006-07)

admin — Fri, 07 Apr 2023 12:41:05 +0000

The Honda CB1300S Super Bol D’or is a motorcycle model that was produced between 2006 and 2007. It is powered by a transverse four-cylinder DOHC engine with 4 valves per cylinder and a capacity of 1284 cc. The bike has liquid cooling and a compression ratio of 9.6:1. It also features PGM-FI fuel injection with 4 x 36mm throttle bodies and digital ignition. The CB1300S has a maximum power of 114 hp and a maximum torque of 117 Nm at 6000 rpm. The clutch is wet multi-plate coil spring and it has a 5-speed transmission with a final chain drive. The front suspension is 43mm cartridge style forks and the rear suspension is twin shocks with adjustable spring preload. The front brakes are 2x 310mm discs with 4-piston calipers and ABS, and the rear brakes are a single 256mm disc with 1 piston caliper and ABS. The bike comes with 130/70 ZR17 front tires and 190/60 ZR17 rear tires. It has a rake of 25.0 degrees and a trail of 99mm or 3.9 inches. The length of the bike is 2220 mm, the width is 790 mm, and the height is 1120 mm. The wheelbase is 1510 mm and the seat height is adjustable, with the lowest setting at 790 mm. The bike weighs 261.0 kg or 575.4 lbs and has a fuel capacity of 21 liters or 5.5 US gallons.

Technical specifications:

Make Model: Honda CB 1300S Super Bol D’or

Year: 2006-07
Engine: Four stroke, Transverse four cylinder, DOHC, 4 valve per cylinder.
Capacity: 1284 cc / 78.3 cu-in
Bore x Stroke: 78 x 67.2 mm
Cooling Sysstem: Liquid cooled
Compression Ratio: 9.6:1
Induction: PGM-FI fuel injection with 4 x 36mm throttle bodies
Ignition: Digital
Starting: Electric
Max Power: 114 hp / 83.2 kW @ 7500 rpm
Max Torque: 117 Nm / 11.9 kg-fm / 86.3 ft-lb @ 6000 rpm
Clutch: Wet multi-plate coil spring
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 43mm cartridge style forks
Rear Suspension: Twin shocks with adjustable spring preload
Front Brakes: 2x 310mm discs 4 piston calipers, ABS
Rear Brakes: Single 256mm disc 1 piston caliper, ABS
Front Tyre: 130/70 ZR17
Rear Tyre: 190/60 ZR17
Rake: 25.0 degrees
Trail: 99 mm / 3.9 in
Dimensions: Length 2220 mm / 87 in Width 790 mm / 31 in Height 1120 mm / 44 in
Wheelbase: 1510 mm / 59.4 in
Seat Height: 790 mm / 31.1 in adjustable, lowest setting.
Ground Clearance: 125 mm / 4.9 in
Wet Weight: 261.0 kg / 575.4 lbs
Fuel Capacity: 21 Litres / 5.5 US gal

The post Honda CB1300 (2006-07) appeared first on MotorcycleSpecifications.com.

Honda CB650Z (1979-82)

admin — Fri, 07 Apr 2023 12:33:03 +0000

The Honda CB 650Z was produced from 1979-1982 and featured a four stroke, transverse four cylinder engine with a capacity of 626 cc. The bike had a compression ratio of 9.0:1 and was cooled by air. It was equipped with 4x 28mm Keihin carburetors and a transistorized ignition system, and had a maximum power output of 63 horsepower at 9000 rpm and a maximum torque of 51.5 Nm at 8000 rpm. Transmission was via a 5-speed gearbox and final drive was by chain. The front suspension was an adjustable telehydraulic fork and the rear suspension was a swinging arm fork with adjustable shock absorbers. The bike featured front brakes consisting of two 276mm discs and a rear brake with a 180mm drum. The front tire was 3.50 -H19 and the rear tire was 4.50 -H17. The bike had a length of 2135mm and a width of 855mm, with a wheelbase of 1430mm and a seat height of 795mm. Ground clearance was 155mm and dry weight was 198kg, with a fuel capacity of 18 litres.

Technical specifications:

Make Model: Honda CB 650Z

Year: 1979-82
Engine: Four stroke, transverse four cylinder, SOHC, 2 valves per cylinder.
Capacity: 626 cc / 38.2 cu-in
Bore x Stroke: 59.8 x 55.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 4x 28mm Keihin carburetors
Ignition: Transistorized
Starting: Electric
Max Power: 63 hp / 46.9 kW @ 9000 rpm
Max Torque: 51.5 Nm / 38 ft-lb @ 8000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Adjustable Telehydraulic fork.
Rear Suspension: Swinging arm fork with adjustable shocks absorbers.
Front Brakes: 2x 276mm discs
Rear Brakes: 180mm drum
Front Tyre: 3.50 -H19
Rear Tyre: 4.50 -H17
Dimensions: Length 2135mm / 84.0 in Width 855mm / 33.6 in
Wheelbase: 1430 mm / 56.2 in
Seat Height: 795 mm / 31.2 in
Ground Clearance: 155 mm / 6.1 in
Dry Weight: 198 kg / 436 lbs
Fuel Capacity: 18 Litres / 4.7 US gal

The post Honda CB650Z (1979-82) appeared first on MotorcycleSpecifications.com.

Honda CX650F (1985)

admin — Fri, 07 Apr 2023 12:14:02 +0000

The Honda CX 650ED Euro Sport is a motorcycle from 1985 with a four-stroke longitudinal 800 V-twin cylinder engine. It has a capacity of 673 cc and a compression ratio of 9.8:1. The ignition is CDI and starting is electric, with a maximum power of 64 hp at 8000 rpm and a maximum torque of 61 Nm at 6500 rpm. The clutch is wet, multi-plate, and there are five speeds in the transmission. The final drive is through a shaft. The front suspension is air-assisted telescopic forks, while the rear is a pro-link with air adjustable preload. Front brakes are two 280mm discs while the rear brake is a single 280mm disc. The front tire is 100/90-18 while the rear is 120/90-18. The dry weight of this motorcycle is 227 kg or 500.4 lbs and wet weight is 235 kg or 518.1 lbs. The motorcycle has a fuel capacity of 19 liters or 5.0 US gallons and an average fuel consumption of 45.5 mpg. The standing 1/4 mile is achieved in 13.5 seconds at 99 mph, and the top speed is 116 mph.

Technical specifications:

Make Model: Honda CX 650ED Euro Sport

Year: 1985-
Engine: Four stroke, longitudinal 800 V-twin cylinder, camshaft nestles at the base of the V between the cylinders. ,OHV, 4 valves per cylinder operated by pushrods
Capacity: 673 cc / 41.07 cu-in
Bore x Stroke: 82.5 x 63 mm
Cooling System: Liquid cooled
Compression Ratio: 9.8:1
Induction: 2x 39mm Keihin
Ignition: CDI
Starting: Electreic
Max Power: 64 hp / 47.7 kW @ 8000 rpm
Max Torque: 61 Nm / 45 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, 5-speed
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Air assisted telescopic forks
Rear Suspension: Pro-link, air adjustable preload
Front Brakes: 2x 280mm discs
Rear Brakes: Single 280mm disc
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Dry Weight: 227 kg / 500.4 lbs
Wet Weight: 235.0 kg / 518.1 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Consumption Average: 45.5 mpg
Standing 1/4 Mile: 13.5 sec / 99 mph
Top Speed: 116 mph

The post Honda CX650F (1985) appeared first on MotorcycleSpecifications.com.

Honda XL600LM (1986)

admin — Tue, 04 Apr 2023 16:27:04 +0000

The Honda XL 600LM Limited Edition motorcycle from 1986 is powered by a four-stroke, single-cylinder, SOHC engine with RFVC radial valve and four valves per cylinder. With a capacity of 589cc, this bike boasts 35.6 cubic inches of power. The compression ratio is 9.0:1, and the ignition is a solid state CD. The bike can start both electrically and with a primary kick, equipped with an automatic compression release. It has a maximum power output of 33 kW or 45 horsepower at 6500 rpm, and a maximum torque output of 48.8 Nm or 36 lb-ft at 5000 rpm. The transmission is five-speed, and the final drive is by chain. Front suspension is provided by 39mm Showa air-adjustable leading-axle forks with dual Syntallic bushings, which travel up to 220mm or 9.0 inches. The rear suspension is a pro-link with adjustable rebound damping and offers 203mm or 8.0 inches of travel. Braking is through a single 240mm disc with a two-piston caliper at the front and a 140mm drum at the rear. The front and rear tires are 3.00-21 and 5.10-17, respectively. The wheelbase measures 1420mm or 55.9 inches, and the seat height is 860mm or 33.8 inches. The ground clearance is 274mm or 10.8 inches. The dry weight of the Honda XL 600LM is 155kg or 341.7lbs, and the wet weight is 189.0kg or 416.7lbs. It has a fuel capacity of 28 litres or 7.4 US gallons.

Technical specifications:

Make Model: Honda XL 600LM Limited Edition

Year: 1986
Engine: Four stroke, single cylinder, SOHC, 4 valve per cylinder, RFVC radial valve
Capacity: 589 cc / 35.6 cu-in
Bore x Stroke: 100 x 75 mm
Cooking System: Air cooled
Compression Ratio: 9.0:1
Induction: 2 x 28mm piston valve carburetor
Ignition: Solid state CD
Starting: Electric & Primary kick with automatic compression release
Max Power: 33 kW / 45 hp @ 6500 rpm
Max Torque: 48.8 Nm / 36 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 39mm Showa air-adjustable leading-axle forks with dual Syntallic bushings
Front Wheel Travel: 220 mm / 9.0 in
Rear Suspension: Pro-link with adjustable rebound damping
Rear Wheel Travel: 203 mm / 8.0 in
Front Brakes: Single 240mm disc 2 piston calliper
Rear Brakes: 140mm Drum
Front Tyre: 3.00-21
Rear Tyre: 5.10-17
Wheelbase: 1420mm / 55.9 in
Seat Height: 860mm / 33.8 in
Ground Clearance: 274 mm / 10.8 in
Dry Weight: 155 kg / 341.7 lbs
Wet Weight: 189.0 kg / 416.7 lbs
Fuel Capacity: 28 Litres / 7.4 US gal

The post Honda XL600LM (1986) appeared first on MotorcycleSpecifications.com.

Honda CBF125 (2009-10)

admin — Tue, 04 Apr 2023 16:13:18 +0000

The Honda CBF 125 Stunner is a motorcycle model that was produced in 2009-10. With a four-stroke, single-cylinder engine, the bike has a capacity of 124.7cc and a maximum power of 11hp at 8000rpm. The front suspension is a telescopic hydraulic fork, while the rear suspension consists of a three-step spring loaded hydraulic shock absorber. The bike’s front brakes are a single 130 mm drum (optional 240 mm disc), and the rear brakes are a single 130 mm drum. The fuel capacity is 10L, and the consumption average is 33.1 km/lit. The bike has a standing 1/4 mile time of 21.2 seconds and a top speed of 98.7 km/h. The bike has a dry weight of 129 kg or 284 lbs. The Honda CBF 125 Stunner is cable operated and has a wet, multiple disc clutch. The bike also has a fuel injection system and an electric and kick start. Overall, the Honda CBF 125 Stunner is a reliable and efficient motorcycle with solid maneuverability and handling.

Technical specifications:

Make Model: Honda CBF 125 Stunner

Year: 2009 – 10
Engine: Four stroke, single cylinder, SOHC, 2 valve
Capacity: 124.7 cc / 7.6 cu-in
Bore x Stroke: 52.4 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Induction: Fuel injection
Ignition: Digital CDI
Starting: Electric & kick
Max Power: 11 hp / 8.1 kW @ 8000rpm
Max Torque: 11Nm / 1.14 kg-m @ 6500rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic hydraulic fork
Rear Suspension: 3 step spring loaded hydraulic shock absorver with recangular box type swing arm
Front Brakes: Single 130mm drum (optional 240mm disc)
Rear Brakes: Single 130mm drum
Front Tyre: 80/100 17
Rear Tyre: 130/70 17
Dry Weight: 129 kg / 284 LBS
Fuel Capacity: 10 Litres / 2.6 US gal
Consumption Average: 33.1 km/lit
Standing 1/4 Mile: 21.2 sec
Top Speed: 98.7 km/h

The post Honda CBF125 (2009-10) appeared first on MotorcycleSpecifications.com.

Honda XR200R (1985)

admin — Tue, 04 Apr 2023 16:07:59 +0000

The Honda XR200R motorcycle was made in 1985 and has a four-stroke, single cylinder SOHC engine with a capacity of 195cc. Its compression ratio is 10.2:1 and has 2x 20mm piston valve Keihin carburetor for induction. The ignition is solid state CD and it starts with a kick. The transmission has 6 speeds and the final drive is a chain. The front suspension has 36mm air-adjustable forks with dual Syntallic bushings while the rear suspension has a Pro-Link, single Showa shock that is adjustable. The front brakes are drum-shaped, as are the rear brakes. The motorcycle has a 3.00-21 front tire and a 110/90-17 rear tire. It has a rake of 26 degrees and a trail of 105mm/4.1in. The wheelbase is 1365mm/53.7in, the seat height is 905mm/35.6in, and dry weight is 102kg/224.8lbs whereas wet weight is 109kg/240lbs. The motorcycle has ground clearance of 315mm/12.4in and a fuel capacity of 9.0 liters/2.4 gallons.

Technical specifications:

Make Model: Honda XR 200R

Year: 1985
Engine: Four stroke, single cylinder SOHC, 2 valve
Capacity: 195 cc / 11.8 cu-in
Bore x Stroke: 67 x 56.5 mm
Compression Ratio: 10.2:1
Induction: 2x 20 mm piston valve Keihin carburator
Ignition: Solid state CD
Spark Plug: NGK DR8ES-L
Starting: Kick
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.769:1 2nd 1.941:1 3rd 1.450:1 4th 1.130:1 5th 0.923:1 6th 0.785:1
Front Suspension: 36 mm Air-adjustable forks with dual Syntallic bushings
Front Wheel Travel: 254 mm / 10.0 in
Rear Suspension: Pro-Link, single Showa shock, adjustable
Rear Wheel Travel: 238.7 mm / 9.5 in
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 110/90 -17
Rake: 26 degrees
Trail: 105 mm / 4.1 in
Wheelbase: 1365 mm / 53.7 in
Seat Height: 905 mm / 35.6 in
Dry Weight: 102 kg / 224.8 lbs
Wet-Weight: 109 kg / 240 lbs
Ground Clearance: 315 mm / 12.4 in
Fuel Capacity: 9.0 Litres / 2.4 gal

The post Honda XR200R (1985) appeared first on MotorcycleSpecifications.com.

Honda NX 650 Dominator (1995)

admin — Tue, 04 Apr 2023 16:04:05 +0000

The Honda NX 650 Dominator was a motorcycle model released in 1995. It had a four-stroke, single-cylinder, SOHC engine with 4 valves per cylinder and a capacity of 644 cc. The bike’s bore x stroke was 100 x 82 mm and it was air-cooled with a compression ratio of 8.3:1. The ignition was digital CDI and it had an electric start. The motorcycle could produce a max power of 45 hp at 6000 rpm and max torque of 53 Nm at 5000 rpm. The clutch was wet, multiple discs and the transmission had 5 speeds with a final drive of a chain. It had a steel, single cradle frame and the front suspension was a 41mm leading-axle fork with 220mm of front wheel travel. The rear suspension was Pro-Link with 195mm of rear wheel travel. The front brakes were a single 256mm disc with a 2 piston caliper and the rear brakes were a single 220mm disc with a 1 piston caliper. The front tire was 90/90 21 and the rear tire was 120/90 17. The bike weighed 163 kg dry and 178 kg wet with a fuel capacity of 16 liters. It had an average fuel consumption of 17.8 km/lit and was capable of a top speed of 160.8 km/h. The stopping distance from 60-0 km/h and 100-0 km/h was 13.8 meters and 40.4 meters respectively, with a standing 1/4 mile time of 13.9 seconds at 147.8 km/h.

Technical specifications:

Make Model: Honda NX 650 Dominator

Year: 1995
Engine: Four-stroke, single cylinder, SOHC, 4 valve per cylinder
Capacity: 644 cc / 39.2 cu-in
Bore x Stroke: 100 x 82 mm
Cooling System: Air cooled
Compression Ratio: 8.3:1
Induction: Single 40mm Keihin VE-type carb
Ignition: Digital CDI
Starting: Electric
Spark Plug: NGK, DPR 8EA-9
Engine Oil: Semi-Synthetic, 10W/40
Max Power: 45 hp / 33.5 kW @ 6000 rpm
Max Torque: 53 Nm / 5.7 kgf-m @ 5000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, Single cradle frame
Front Suspension: 41mm leading-axle fork
Front Wheel Travel: 220 mm / 8.6 in
Rear Suspension: Pro-Link,
Rear Wheel Travel: 195 mm / 7.6 in
Front Brakes: Single 256mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 90/90 21
Rear Tyre: 120/90 17
Fork Angle: 62 degrees
Trail: 115 mm / 4.5 in
Wheelbase: 1435 mm / 56.4 in
Seat Height: 870 mm / 24.2 in
Ground Clearance: 250 mm / 9.8 in
Dry Weight: 163 kg / 359.3 lbs
Wet Weight: 178 kg / 392.4 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 17.8 km/lit
Braking 60 – 0 / 100 – 0: 13.8 m / 40.4 m
Standing 1/4 Mile: 13.9 sec / 147.8 km/h
Top Speed: 160.8 km/h

The post Honda NX 650 Dominator (1995) appeared first on MotorcycleSpecifications.com.

Honda VT1300CX (2016-17)

admin — Tue, 04 Apr 2023 16:00:01 +0000

The Honda VT 1300CX Fury is a motorbike that was produced between 2016 and 2017. It is powered by a liquid-cooled, four-stroke, 52-degree V-twin engine with a capacity of 1312 cc. The engine is equipped with three valves per cylinder and has a compression ratio of 9.2:1. The bike is started using an electric starter and has a maximum power output of 57 horsepower and a maximum torque of 79 lb-ft. The transmission is five-speed and the final drive is via a shaft. The frame is made of steel and has a double-cradle design. The front suspension comprises a 45mm fork and the rear suspension is a single shock with adjustable rebound damping and five-position spring preload adjustability. The bike has a single 336mm disc brake with a two-piston caliper at the front and a single 296mm disc brake with a one-piston caliper at the back. The front tyre size is 90/90-21, and the rear tyre size is 200/50-18. The bike has a rake of 32 degrees and a trail of 92 mm. The wheelbase is 1808 mm, and the seat height is 678 mm. The wet weight of the bike is 300 kg, and the fuel capacity is 13 litres.

Technical specifications:

Make Model: Honda VT 1300CX Fury

Year: 2016 – 17
Engine: Four stroke, 52 degreesV-twin, SOHC, 3 valve per cylinder.
Capacity: 1312 cc / 80.06 cu/in
Bore x Stroke: 89.5 x 104.3mm
Cooling System: Liquid cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Induction: PGM-FI with automatic enricher circuit, one 38mm throttle body38mm throttle body
Ignition: Digital with three-dimensional mapping, two spark plugs per cylinder
Starting: Electric
Max Power: 57 hp / 42.5 kW @ 4250 rpm
Max Torque: 79 lb-ft / 107 Nm @ 2250 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Frome: Steel, Double cradle frame
Front Suspension: 45mm fork; 4.0 inches wheel travel
Rear Suspension: Single shock with adjustable rebound damping and five-position spring preload adjustability; 3.7 inches travel
Front Brakes: Single 336mm disc 2 piston caliper
Rear Brakes: Single 296mm disc 1 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 200/50-18
Rake: 32 degrees
Trail: 92 mm / 3.6 in
Wheelbase: 1808 mm / 71.2 in
Seat Height: 678 mm / 26.7 in
Wet Weight: 300 kg / 663 lbs
Fuel Capacity: 13 Litres / 3.4 US gal

The post Honda VT1300CX (2016-17) appeared first on MotorcycleSpecifications.com.

Honda NSR 250R-SP Rothmans Replica (1988)

admin — Tue, 04 Apr 2023 15:48:05 +0000

The Honda NSR 250R-SP Rothmans Replica motorcycle was produced in 1988 and features a two-stroke, 90 degrees V-twin cylinder engine with a capacity of 249 cc. It has liquid cooling and a compression ratio of 6.2:1. The maximum power is 45 hp at 9500 rpm and the maximum torque is 35 Nm at 8500 rpm. The bike has a six-speed constant mesh transmission and a chain final drive. The frame is made of aluminum tubes and the front suspension is telescopic while the rear suspension is a Pro-Link single shock swingarm. The front brakes have two discs and two piston calipers while the rear has a single disc and one piston caliper. The bike has a dry weight of 125 kg and a wet weight of 141 kg with a fuel capacity of 16 liters. The dimensions are 2035 mm in length, 705 mm in width, and 1105 mm in height, with a wheelbase of 1360 mm and a seat height of 750 mm. The ground clearance is 135 mm. Type I and Type II versions of the bike, as well as technical information, can be found on nsr250.net.

Technical specifications:

Make Model: Honda NSR 250R-SP Rothmans Replica

Year: 1988
Engine: Two stroke, 90 degreesV-twin cylinder, reed valve/exhaust valve
Capacity: 249 c / 15.2 cu-in
Bore x Stroke: 54 x 54.5 mm
Cooling System: Liquid cooled
Compression Ratio: 6.2: 1
Lubrication: Injected 2-stroke oil
Exhaust: Expansion chamber, RC power valves
Induction: TA10A Carburetor Type
Ignition: CDI
Starting: Kick
Max Power: 45 hp / 32.8 kW @ 9500 rpm
Max Torque: 35 Nm / 25.8 ft-lb @ 8500 rpm
Clutch: Wet plate
Transmission: Constant Mesh 6-speed
Final Drive: Chain
Gear Ratio: 1st: 2.846 / 2nd: 1.941 / 3rd: 1.500 / 4th: 1.272 / 5th: 1.136 / 6th: 1.045
Frame: Aluminum tube type frame
Front Suspension: Telescopic air valve semi-adjustable
Rear Suspension: Rear: Pro-Link Single shock swingarm non-adjustable
Front Brakes: 2x discs 2 piston calipers
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 100/80-17 52 H
Rear Tyre: 130/70-18 63 H
Rake: 23 degrees
Trail: 87 mm / 3.4 in
Dimensions: Length 2035 mm / 80.1 in Width 705 mm / 27.7 in Height 1105 mm / 43.5 in
Wheelbase: 1360 mm / 53.5 in
Seat Height: 750 mm / 29.5 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 125 kg / 275.5 lbs
Wet Weight: 141 kg / 310.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Related Links: Type I / Type II / Technical / nsr250.net

The post Honda NSR 250R-SP Rothmans Replica (1988) appeared first on MotorcycleSpecifications.com.

Honda NSR 250R MC21 (1991)

admin — Tue, 04 Apr 2023 15:44:04 +0000

The Honda NSR 250R MC21 is a motorcycle from 1991 with a two stroke 90 degree V-twin cylinder engine and a capacity of 249 c. It has a kick start, a multi-plate coil spring clutch, and a constant mesh 6-speed transmission with a final drive chain. The frame is made of aluminum tubes and the suspension consists of front telescopic air valve semi-adjustable forks and a rear Pro-Link single shock swingarm. The NSR 250R MC21 has two front disc brakes with two piston calipers and a single rear disc brake with a one piston caliper. The front and rear tires are 110/70-17 53 H and 150/60-R18 67 H respectively. The dimensions of the motorcycle include a length of 1975 mm, width of 655 mm, height of 1060 mm, and a wheelbase of 1345 mm. The dry weight of the motorcycle is 132 kg and the wet weight is 151 kg. The fuel capacity is 16 liters or 4.2 US gallons. There are several reviews available for the Honda NSR 250R MC21 including Type I, Type II, Technical, and nsr250.net.

Technical specifications:

Make Model: Honda NSR 250R MC21

Year: 1991
Engine: Two stroke, 90 degreesV-twin cylinder, reed valve/exhaust valve
Capacity: 249 c / 15.2 cu-in
Bore x Stroke: 54 x 54.5 mm
Cooling System: Liquid cooled
Compression Ratio: 7.3: 1
Induction: TA20 Carburetor Type
Lubrication: Seperate Pump (engine) splash type (transmission)
Ignition: PGM-CDI
Starting: Kick
Max Power: 45 hp / 32.8 kW @ 9500 rpm
Max Torque: 35 Nm / 25.8 ft-lb @ 8500 rpm
Clutch: Multi-plate, coil spring
Transmission: Constant Mesh 6-speed
Final Drive: Chain
Gear Ratio: 1st: 2.642 / 2nd: 1.800 / 3rd: 1.380 / 4th: 1.125 / 5th: 1.000 / 6th: 0.916
Frame: Aluminum tube type frame
Front Suspension: 41mm Telescopic air valve semi-adjustable
Rear Suspension: Rear: Pro-Link Single shock swingarm non-adjustable
Front Brakes: 2x discs 2 piston calipers
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 110/70-17 53 H
Rear Tyre: 150/60-R18 67 H
Rake: 23 degrees15
Trail: 87 mm / 3.4 in
Dimensions: Length 1975 mm / 77.7 in Width 655 mm / 25.7 in Height 1060 mm / 41.7 in
Wheelbase: 1345 mm / 52.9 in
Seat Height: 770 mm / 30.3 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 132 kg / 291.8 lbs
Wet Weight: 151 kg / 337 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Review: Type I / Type II / Technical / nsr250.net

The post Honda NSR 250R MC21 (1991) appeared first on MotorcycleSpecifications.com.

Honda VTR 1000F Firestorm (1997-98)

admin — Tue, 04 Apr 2023 15:36:06 +0000

The Honda VTR 1000F Firestorm is a 1997-98 motorcycle with a four-stroke, 90 degree V-twin, DOHC, 4 valve per cylinder engine and a capacity of 996 cc/ 60.8 cu-in. It has a maximum power of 110 hp / 80.2 kW @ 9000 rpm (rear tire 103.1 hp @ 8700 rpm) and maximum torque of 97Nm / 71.5 lb-ft @ 7000rpm. The bike features a hydraulic clutch and a six-speed transmission, with final drive being a chain. The frame is made of aluminum and has a twin spar, while the front suspension uses a 41mm H.M.A.S. cartridge-type fork with adjustable spring preload and rebound damping. The rear suspension is a Pro-Link with preload and rebound damping-adjustable gas-charged H.M.A.S. damper. Front brakes feature 2x 296mm discs with 6-piston calipers, while the rear brake has a single 220mm disc with a 1-piston caliper. The fuel capacity is 15.8 Liters / 4.2 US gal with an average consumption of 17.2 km/lit. It has a top speed of 248.3 km/h / 154.2 mph and a 0-60 acceleration time of 3.7 seconds. The bike has been reviewed by Motoplus and Motosprint in 1997.

Technical specifications:

Make Model: Honda VTR 1000F Firestorm

Year: 1997-98
Engine: Four stroke, 90 degreesV-twin, DOHC, 4 valve per cylinder.
Capacity: 996 cc / 60.8 cu-in
Bore x Stroke: 98 X 66 mm
Cooling System: Liquid cooled
Compression Ratio: 9.4:1
Induction: 2x 48mm Keihin CV
Ignition: Computer-controlled digital
Starting: Electric
Spark Plug: NGK, DPR9EVX-9
Max Power: 110 hp / 80.2 kW @ 9000 rpm (rear tyre 103.1 hp @ 8700 rpm)
Max Power Rear Tyre: 103.1 hp @ 8700 rpm
Max Torque: 97Nm / 71.5 lb-ft @ 7000 rpm
Clutch: Hydraulic clutch
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium, twin spar
Front Suspension: 41mm H.M.A.S. cartridge-type fork with adjustable spring preload and rebound damping
Front Wheel Travel: 109 mm / 4.2 in
Rear Suspension: Pro-Link with preload and rebound damping-adjustable gas-charged H.M.A.S. damper
Rear Wheel Travel: 124 mm / 4.9 in
Front Brakes: 2x 296mm discs 6 piston calipers
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Wheelbase: 1430 mm / 56 in
Seat Height: 810 mm / 32.0 in
Dry Weight: 192 kg / 423 lbs
Wet-Weight: 209 kg / 460 lbs
Fuel Capacity: 15.8 Liters / 4.2 US gal
Consumption Average: 17.2 km/lit
Braking 60 – 0 / 100 – 0: 12.7 m / 37.6 m
Standing 1/4 Mile: 10.9 sec / 204.8 km/h
Top Speed: 248.3 km/h / 154.2 mph
Road Tests: Motoplus 1997 Motosprint 1997

The post Honda VTR 1000F Firestorm (1997-98) appeared first on MotorcycleSpecifications.com.

Honda CBX125F (1991-93)

admin — Tue, 04 Apr 2023 15:22:03 +0000

The Honda CBX 125F is a motorcycle produced from 1991 to 1993. It is equipped with a four-stroke, single cylinder, DOHC, 4 valve engine with a capacity of 124cc. The bike has a compression ratio of 11.0:1 and uses PF40 induction and CDI ignition. The CBX 125F is capable of producing a maximum power of 17 hp at 11500 rpm and a maximum torque of 1.1 kgf-m at 8500 rpm. The bike’s transmission is a 6-speed manual and its final drive is via chain. The CBX 125F has a semi-double cradle frame and is equipped with telescopic forks for the front suspension and a swinging arm for the rear suspension. It has a single disc brake for the front wheel and a drum brake for the rear wheel. The front tyre is 80/100-16 and the rear tyre is 90/90-18. The bike has a seat height of 730 mm, a dry weight of 105 kg, and a fuel capacity of 12 litres.

Technical specifications:

Make Model: Honda CBX 125F

Year: 1991-93
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 124
Bore x Stroke: 58 x 47 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: PF40
Ignition: CDI
Starting: Electric
Max Power: 17 hp @ 11500 rpm
Max Torque: 1.1 kgf-m @ 8500 rpm
Transmission / Drive: 6 Speed
Final Drive: Chain
Frame: Semi-double cradle.
Front Suspension: Telescopic forks
Rear Suspension: Swinging arm
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 80/100- 16
Rear Tyre: 90/90- 18
Seat Height: 730 mm
Dry Weight: 105 kg
Fuel Capacity: 12 Litres

The post Honda CBX125F (1991-93) appeared first on MotorcycleSpecifications.com.

Honda XR400R (2004)

admin — Tue, 04 Apr 2023 14:28:04 +0000

The Honda XR400R is a 2004 motorcycle that features a four-stroke, single-cylinder engine with a capacity of 397cc. It has a bore of 85mm and a stroke of 70mm, and uses a silent multi-link chain driven SOHC with rocker arms, as well as a 4 valve design. The cooling system is air-cooled, and the compression ratio is 9.3:1. The bike uses a carburetor with a piston valve and throttle bore of 38mm. The lubrication system is forced pressure with a trochoid oil pump type, and the ignition is solid state CDI with electronic advance. The bike is started with a kick, and has a maximum power output of 34hp at 6500rpm. The clutch is multi-plate and wet, and the transmission is a 5-speed with chain final drive. The front suspension features a 43mm leading-axle Showa cartridge fork, and the rear suspension uses a Pro-Link Showa single shock. The front brakes are a single 256mm disc with 2 piston calipers, while the rear brakes are a single 220mm disc with 1 piston caliper. The bike has a caster angle of 25 degrees and a trail of 94mm. Its dimensions are 2130mm in length, 840mm in width, and 1240mm in height, with a wheelbase of 1425mm and a seat height of 930mm. The dry weight is 116.5kg, and the wet weight is 125kg. The fuel capacity is 9.5 litres, and the bike has a top speed of 137km/h with a standing 1/4 mile time of 14.8 seconds at 132km/h. It was reviewed positively by Tutomoto in 1996.

Technical specifications:

Make Model: Honda XR 400R

Year: 2004
Engine: Four stroke, single cylinder, Silent multi-link chain driven SOHC with rocker arms, 4 valve
Capacity: 397 cc / 24.2 cu-in
Bore x Stroke: 85 x 70 mm
Cooling System: Air cooled
Compression Ratio: 9.3:1
Induction: Carburettor (Carburetor) type: Piston valve Throttle Bore: 38 mm (1.5 in)
Lubrication: Forced pressure (dry sump)
Oil Pump Type: Trochoid
Ignition: Solid state CDI with electronic advance
Starting: Kick
Max Power: 34 hp / 24.8 kW @ 65000 rpm
Clutch: Multi-plate, wet
Transmission: 5 Speed
Final Drive: Chain
Primary Reduction: 2.826 (65/23)
Final Reduction: 3.000 (45/15) *Note – Gearing varies from country to country. Some have 40/15 as standard.
Gear Ratio: 1st: 2.615 (34/13) 2nd: 1.842 (35/19) 3rd: 1.400 (28/20) 4th: 1.120 (28/25) 5th: 0.926 (25/27)
Gearshift Pattern: Left operated return system 1 – N – 2 – 3 – 4 – 5
Frame: Semi-double cradle
Front Suspension: 43 mm leading-axle Showa cartridge fork with 18-position compression and 12-position rebound damping adjustability
Front Wheel Travel: 280 mm / 11.0 in
Rear Suspension: Pro-Link Showa single shock with spring preload, 16-position compression and 16-position rebound damping adjustability.
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 256 mm disc 2 piston caliper
Rear Brakes: Single 220 mm disc 1 piston caliper
Front Tyre: 80/100-21
Rear Tyre: 110/100-18
Caster Angle: 25 degrees
Trail: 94 mm / 3.7 in
Dimensions: Length 2130 mm / 83.9 in Width 840 mm / 33.1 in Height 1240 mm / 48.8 in
Wheelbase: 1425 mm / 56.1 in
Seat Height: 930 mm / 36.6 in
Ground Clearance: 310 mm / 12.2 in
Dry Weight: 116.5 kg / 257 lbs
Wet Weight: 125 kg / 276 lbs
Fuel Capacity: 9.5 Litres / 2.5 US gal
Standing 1/4 Mile: 14.8 sec / 132 km/h
Top Speed: 137 km/h / 85 mph
Road Test: Tutomoto 1996

The post Honda XR400R (2004) appeared first on MotorcycleSpecifications.com.

Honda VT1300 (2010)

admin — Tue, 04 Apr 2023 14:26:02 +0000

The Honda VT 1300CS Sabre is a motorcycle model from 2010, known for its powerful engine and impressive torque. It has a liquid-cooled, four-stroke 1312 cc V-twin engine with an automatic enricher circuit and a 38mm throttle body. The ignition system is digital with three-dimensional mapping and two spark plugs per cylinder. The bike is electrically started and can produce a maximum power of 74 horsepower at 5,000rpm and maximum torque of 123 Nm at 3,000rpm. It has a 5-speed transmission and shaft final drive.

The Honda VT 1300CS Sabre also has a comfortable suspension system with a 45mm telescopic fork at the front and a single shock with adjustable rebound damping and five-position spring preload adjustability at the rear. The front brake is a single 336mm disc with a two-piston caliper and the rear brake is a single 296mm disc with a one-piston caliper. The front and rear tyres are 90/90-21 and 170/80-15 respectively.

This motorcycle has a 33-degree rake and 115mm of trail with a wheelbase of 1785.6mm and a seat height of 683mm. It weighs approximately 300kg and has a fuel capacity of 16.7 liters. The Honda VT 1300CS Sabre is a popular choice among enthusiasts for its performance and comfortable ride.

Technical specifications:

Make Model: Honda VT 1300CS Sabre

Year: 2010
Engine: Four stroke, 52 degreesV-twin, SOHC, 3 valve per cylinder.
Capacity: 1312 cc / 80 cu-in
Bore x Stroke: 89.5 x 104.3mm
Cooling System: Liquid cooled
Compression Ratio: 9.2:1
Induction: PGM-FI with automatic enricher circuit, one 38mm throttle body38mm throttle body
Ignition: Digital with three-dimensional mapping, two spark plugs per cylinder
Starting: Electric
Max Power: 74 hp / 55 kW @ 5.000rpm
Max Torque: 123 Nm / 90.7 ft-lb @ 3.000rpm
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: 45mm Telescopic fork
Front Wheel Travel: 101 mm / 4.0 in
Rear Suspension: Single shock with adjustable rebound damping and five-position spring preload adjustability
Rear Wheel Travel: 93 mm / 3.7 in
Front Brakes: Single 336mm disc 2 piston caliper
Rear Brakes: Single 296mm disc 1 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 170/80-15
Rake: 33 degrees
Trail: 115 mm / 4.5 in
Wheelbase: 1785.6 mm 70.3 in
Seat Height: 683 mm / 26.9 in
Dry Weight: 300 kg / 659 lbs
Fuel Capacity: 16.7 Liters / 4.4 US gal

The post Honda VT1300 (2010) appeared first on MotorcycleSpecifications.com.

Honda Shadow RS (2014-16)

admin — Tue, 04 Apr 2023 13:36:57 +0000

The Honda Shadow RS (VT 750S) motorcycle was produced between 2014 and 2016. It has a four stroke, 745cc V-twin engine with liquid cooling and 3 valves per cylinder, producing a maximum power of 43hp and a maximum torque of 60.5Nm. The bike uses electronic fuel injection and has a 5-speed transmission with a final drive of an o-ring-sealed chain. It has a front suspension of a 41mm telescopic fork and dual shocks with 5-way spring-preload adjustability for the rear suspension. The front and rear brakes are a single 296mm disc with a 2 piston caliper and a 180mm drum, respectively. The front tire is 100/90 -19 and the rear tire is 150/80 -16. The wheelbase measures 1562mm and the seat height is 737mm. The bike weighs 229.5kg with a fuel capacity of 10 liters.

Technical specifications:

Make Model: Honda VT 750RS Shadow (VT 750S )

Year: 2014-16
Engine: Four stroke, 52 degreesV-twin, SOHC. 3 valve per cylinder
Capacity: 745 cc / 45.7 cu-in
Bore x Stroke: 79 x 76 mm
Cooling System: Liquid cooled
Compression Ratio: 9.6:1
Induction: PGM-FI electronic fuel injection with automatic choke, 34mm Throttle Bore
Ignition: Solid-state with electronic advance, two spark plugs per cylinder
Starting: Electric
Max Power: 43 hp / 32.1 kW @ 5500 rpm
Max Torque: 60.5 Nm / 44 ft.-lb @ 3000 rpm
Clutch: Wet, multiplate with coil springs
Transmission: 5 Speed
Final Drive: O-ring-sealed chain
Gear Ratio: 1st 2.400 (36/15) / 2nd 1.550 (31/20) / 3rd 1.174 (27/23) / 4th 0.960 (24/25) / 5th 0.852 (23/27)
Front Suspension: 41mm Telescopic fork.
Front Wheel Travel: 129.5 mm / 5.0 in
Rear Suspension: Dual shocks 5-way spring-preload adjustability
Rear Wheel Travel: 90 mm / 3.5 in
Front Brakes: Single 296 mm disc 2 piston caliper
Rear Brakes: 180 mm Drum
Front Tyre: 100/90 -19
Rear Tyre: 150/80 -16
Wheelbase: 1562 mm / 61.5 in
Seat Height: 737 mm / 29.4 in
Wet Weight: 229.5 kg / 507 lbs
Fuel Capacity: 10 Liters / 2.8 gal

The post Honda Shadow RS (2014-16) appeared first on MotorcycleSpecifications.com.

Honda CB250G (1974-75)

admin — Tue, 04 Apr 2023 13:01:08 +0000

The Honda CB250G was a motorcycle model produced in 1974-75. It features a twin cylinder, air cooled, four stroke engine, with OHC and two valves per cylinder, and a capacity of 249. The bore and stroke measure 56 x 50.6 mm and the compression ratio is 9.5:1. The bike has an ignition and starts using a 5-speed transmission and chain drive system. The front suspension uses telescopic forks while the rear suspension has dual shocks. The front brake is a single disc while the rear is a drum. The CB250G uses 3.00-18 front and 3.25-18 rear tyres respectively. The bike has a dry weight of 170 kg and a fuel capacity of 10 litres. Its maximum power output is 30 horsepower or 21.9 kW at an RPM of 10500.

Technical specifications:

Make Model: Honda CB 250

Year: 1974-75
Engine: Air cooled, four stroke, twin cylinder, OHC, 2 valve per cylinder
Capacity: 249
Bore x Stroke: 56 x 50.6 mm
Compression Ratio: 9.5:1
Induction:
Ignition / Starting:
Max Power: 30 hp 21.9 kW @ 10500 rpm
Transmission / Drive: 5 Speed / chain
Front Suspension: Telescopic forks
Rear Suspension: Dual chocks
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 3.00-18
Rear Tyre: 3.25-18
Dry Weight: 170 kg
Fuel Capacity: 10 Litres

The post Honda CB250G (1974-75) appeared first on MotorcycleSpecifications.com.

Honda CB400N (1980-81)

admin — Tue, 04 Apr 2023 12:45:08 +0000

The Honda CB 400N Super Dream is a motorcycle model from 1980-81, with a four-stroke parallel twin-cylinder engine featuring SOHC, three valves per cylinder, and 360 degrees crankshaft, twin balance-shafts. The engine has a capacity of 395 cc/24.1 cu-in with a compression ratio of 9.3:1. The bike has a 32mm Keihin carburetor and CDI ignition with electric and kick starting. The motorcycle has a maximum power output of 43 hp/31.4 kW at 9500 rpm and a six-speed transmission. Braking is achieved through a front dual-disc of 239mm and a rear 152mm drum. The front suspension has telescopic forks, while the rear features dual EVO dampers with five-way spring preload adjustment. The motorcycle has a wheelbase of 1390 m/54.7 in and a seat height of 795 mm/31.2 in. Its wet weight is 175.5 kg/387 lbs and has a fuel capacity of 14 litres/3.7 US gal. Additionally, it has an average consumption of 52 mpg, a standing 1/4 mile of 14.6 sec, a top speed of 166.4 km/h/103.4 mph, and a braking distance of 60-0/100-0 of -/38.1 m.

Technical specifications:

Make Model: Honda CB 400N Super Dream

Year: 1980 – 81
Engine: Four stroke, parallel twin cylinder, SOHC, 3 valves per cylinder, 360 degrees crankshaft and twin balance-shafts
Capacity: 395 cc / 24.1 cu-in
Bore x Stroke: 70.5 x 50.6 mm
Cooling System: Air cooled
Compression Ratio: 9.3:1
Induction: 32mm Keihin carburetors
Ignition: CDI
Starting: Electric & kick
Max Power: 43 hp / 31.4 kW @ 9500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual EVO dampers with 5-way spring preload adjustment.
Front Brakes: 2x 239mm disc
Rear Brakes: 152mm Drum
Front Tyre: 3.60-19
Rear Tyre: 4.10-18
Wheelbase: 1390 m / 54.7 in
Seat Height: 795 mm / 31.2 in
Wet-Weight: 175.5 kg / 387 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Consumption Average: 52 mpg
Braking 60 – 0 / 100 – 0: – / 38.1 m
Standing 1/4 Mile: 14.6 sec
Top Speed: 166.4 km/h / 103.4 mph

The post Honda CB400N (1980-81) appeared first on MotorcycleSpecifications.com.

Honda NC 700X / DCT (2016-17)

admin — Tue, 04 Apr 2023 12:37:02 +0000

The Honda NC 700X / DCT motorcycle was made in 2016-17 and has a liquid-cooled, four-stroke, parallel-twin engine with PGM-FI electronic fuel injection. The bike has a six-speed manual transmission or a six-speed dual clutch transmission and a wet multiplate hydraulic 2-clutch system. The max power is 38.1 kW at 6250 rpm and the max torque is 62 Nm at 4750 rpm. The bike has a single 320 mm hydraulic disc with 3-piston calipers and sintered metal pads for the front brakes and a single 240 mm hydraulic disc with 1-piston caliper and sintered metal pads for the rear brakes. The front and rear tyres are 120/70-ZR17 and 160/60-ZR17 respectively. The bike has a rigid tube steel diamond frame, 41 mm telescopic forks for the front suspension, and a single monoshock damper for the rear suspension, with wheel travel of 153 mm and 150 mm respectively. The bike is 2210 mm long, 830 mm wide, and 1285 mm tall, with a wheelbase of 1540 mm and a seat height of 790 mm (Europe) or 775 mm (Japan). The wet weight is 218 kg and the fuel capacity is 14.1 litres.

Technical specifications:

Make Model: Honda NC 700X / DCT

Year: 2016 – 17
Engine: Four stroke , Parallel twin, SOHC, 4 valves per cylinder
Capacity: 670 cc / 40.8 cu-in
Bore x Stroke: 73 80 mm
Cooling System: Liquid-cooled
Compression Ratio: 10.7:1
Induction: PGM-FI electronic fuel injection
Ignition: Computer-controlled digital transistorised with electronic advance
Starting: Electric
Max Power: 38.1 kW 51.1 hp @ 6250 rpm
Max Torque: 62 Nm 46 lb-ft @ 4750 rpm
Clutch: Wet Multiplate
Clutch DCT: Wet multiplate hydraulic 2-clutch
Transmission: 6 Speed Manual
Transmission DCT: 6-Speed Dual Clutch Transmission
Final Drive: Chain
Gear Ratio: 1 2.812 (DCT 2.666) 2 1.894 (DCT 1.904) 3 1.454 (DCT 1.454) 4 1.200 (DCT 1.200) 5 1.033 (DCT 1.033) 6 0.837 (DCT 0.837)
Final Reduction: 2.687 (DCT 2.437)
Frame: Rigid tube steel diamond
Front Suspension: 41 mm telescopic forks
Front Wheel Travel: 153 mm / 6.0 in
Rear Suspension: Single monoshock damper
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: Single 320 mm hydraulic disc 3 piston calipers and sintered metal pads
Rear Brakes: Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads
Front Tyre: 120/70-ZR17
Rear Tyre: 160/60-ZR17
Rake: 27
Trail: 110 mm / 4.3 IN
Dimensions: Length 2210 mm / 87.0 in Wedth 830 mm / 32.7 in Height 1285 mm / 50.6 in
Wheelbase: 1540 mm / 60.6 in
Seat Height: 790 mm (Europe) – 775 mm (Japan)
Ground Clearance: 165 mm / 6.5 in
Wet Weight: 218 kg / 480.6 in
Fuel Capacity: 14.1 Litres / 3.7 US gal

The post Honda NC 700X / DCT (2016-17) appeared first on MotorcycleSpecifications.com.

Honda XRV 750 Africa Twin (2002-03)

admin — Tue, 04 Apr 2023 12:31:06 +0000

The Honda XRV 750 Africa Twin was produced in 2002-03 and had a four-stroke, longitudinal V-twin engine with 742cc capacity and a compression ratio of 9.0:1. The engine was liquid-cooled and used a wet sump lubrication system. The bike had 2x 38mm flat side CV induction and TCI ignition. The maximum power output was 62 hp at 7500 rpm and it had a 5-speed transmission with chain final drive. The frame was a single downtube with double-loop cradle and a rectangular section made of steel. The bike had front suspension with a 43mm air-assisted telescopic fork and rear suspension with Pro-Link 214mm wheel travel with preload and compression damping adjustment. The front brakes were 2 x 276mm discs with 2 piston calipers, and the rear brake was a single 256mm disc with 1 piston caliper. The bike had a fuel capacity of 23 liters and a dry weight of 207kg with a seat height of 860mm. It had a top speed of 181.8 km/h and a 0-100 braking distance of 40.7 meters. A manual with color codes and torque settings was available. Overall, the Honda XRV 750 Africa Twin was a well-rounded adventure touring motorcycle.

Technical specifications:

Make Model: Honda XRV 750 Africa Twin

Year: 2002-03
Engine: Four stroke, Longitudinal 52 degreesV-twin. SOHC, 3 Valve per cylinder
Capacity: 742 cc / 45.2 cu-in
Bore x Stroke: 81 x 72 mm
Compression Ratio: 9.0:1
Valve clearances (COLD engine): Intake valves: 0.13 to 0.17 mm Exhaust valves: 0.18 to 0.22 mm
Cooling System: Liquid cooled, 2.03 l (2.15 US qt, 1.79 Imp qt)
Lubrication: Wet sump
Engine Oil: (After draining) 2.4 l (2.5 US qt, 2.1 Imp qt) (After draining and oil filter change) 2.6 l (2.7 US qt, 2.3 Imp qt) (After disassembly) 3.2 l (3.4 US qt, 2.8 Imp qt)
Induction: 2x 38 mm Flat side CV
Idle speed: 1,200 +/- 100 min ^1(rpm) …E,G,F,ED,AR,II G 1,200 +/- 50 min ^1(rpm) ..SW
Ignition: TCI (Transistor Controlled Ignition)
Battery: 12V – 12AH
Generator: 0.36kW/5,000min ^1(rpm)
Spark Plug: Standard: DPR8EA9 (NGK) or X24EPR – U9 (DENSO) Cold climate (Below 5 degreesC, 41 degreesF): DPR7EA9 (NGK) or X22EPR – U9 (DENSO) For extended high speed riding: DPR9EA9 (NGK) or X27EPR – U9 (DENSO)
Spark Plug Gap: 0.80 – 0.90 mm (0.031 – 0.035 in)
Starting: Electric
Max Power: 62 hp / 45.3 kW @ 7500 rpm
Max Torque: 62.7 Nm / 6.4 kgf-m @ 6000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Chain
Primary Reduction: 1.763
Gear ratio: 1st: 3.083 / 2nd: 2.062 / 3rd: 1.550 / 4th: 1.272 / 5th: 1.083
Final Reduction: 2.812 …E,G,F,SW,ED,II G 2.687 …AR
Frame: Single downtube with double-loop cradle, rectangular section, steel
Front Suspension: 43 mm air-assisted telescopic fork
Front Wheel Travel: 220 mm / 8.6 in
Rear Suspension: Pro-Link 214 mm wheel travel with preload and compression damping adjustment
Rear Wheel Travel: 214 mm / 8.4 in
Front Brakes: 2 X 276 mm discs 2 piston calipers
Rear Brakes: Single 256 mm disc 1 piston caliper
Front Tyre: 90/90 D21
Rear Tyre: 140/80 R17
Rake: 27 degrees
Trail: 133 mm / 5.2 in
Dimensions: Length 2315 mm / 84 in Width 905 mm / 35.6 in Height 1430 mm / 56.2 in
Wheelbase: 1565 mm / 61.6 in
Seat Height: 860 mm / 33.9 in
Dry Weight: 207 kg / 456 lbs
Wet Weight: 218 kg / 481 lbs
Fuel Capacity: 23 Litres / 6.1 gal
Reserve: 5.1 Litres / 1.35 gal
Consumption Average: 16.4 km/lit
Braking 60 – 0 / 100 – 0: 13.3 m / 40.7m
Standing 1/4 Mile: 13.1 sec / 56.6 km/h
Top Speed: 181.8 km/h / 112 mph
Manual: Colours and codes lights & Torque settingss / .blackbears.ru

The post Honda XRV 750 Africa Twin (2002-03) appeared first on MotorcycleSpecifications.com.

Honda XL250 (1972-73)

admin — Tue, 04 Apr 2023 12:25:04 +0000

The Honda XL 250 was a motorcycle model manufactured between 1972-73. Equipped with a four-stroke, single-cylinder, OHC engine that produced 20hp @ 8000 rpm, it had a capacity of 248 cc / 15.1 cu-in with a bore x stroke of 74 X 57.8 mm. The bike was cooled by an air-cooling system and had a compression ratio of 9.1:1. The ignition system used battery and coil while the starting mechanism was kick-start. The bike was equipped with a multiple disc in oil bath clutch and had a 5-speed transmission serving the final chain drive. The frame was a semi-double cradle with telescopic forks for the front suspension and a swinging fork for the rear suspension. The front and rear brake systems used drum brakes with 150 mm and 140 mm drums respectively. The bike weighed 135.6 kg / 299 lbs and had a fuel capacity of 9.5 litres / 1.7 gal.

Technical specifications:

Make Model: Honda XL 250

Year: 1972-73
Engine: Four stroke, single cylinder, OHC
Capacity: 248 cc / 15.1 cu-in
Bore x Stroke: 74 X 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.1:1
Induction: 1x 28mm Keihin carburettor
Ignition: Battery and coil
Starting: Kick
Max Power: 20 hp @ 8000 rpm
Max Torque:
Clutch: Multiple disc in oil bath
Transmission: 5 Speed
Final Drive: Chain
Frame: Semi double cradle
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 150 mm Drum
Rear Brakes: 140 mm Drum
Front Tyre: 2.75 -21
Rear Tyre: 4.00 -18
Weight: 135.6 kg / 299 lbs
Fuel Capacity: 9.5 Litres / 1.7 gal

The post Honda XL250 (1972-73) appeared first on MotorcycleSpecifications.com.

Honda Navi 110 (2016-17)

admin — Tue, 04 Apr 2023 12:15:02 +0000

The Honda Navi 110 is a motorcycle with a four-stroke, single cylinder, SOHC engine and a capacity of 109.1cc. Its maximum power is 5.91 kW/8 hp at 7000 rpm and its maximum torque is 8.9 Nm/6.5 lb-ft at 5500 rpm. The Navi 110 has a V-Matic transmission system and a final drive chain. Its frame is underbone and it has front telescopic forks and rear monoshock, spring-loaded hydraulic suspension. The front and rear brakes are both 130mm drums. The Navi 110 has tubeless tires, with the front tire being 90/90-12 and the rear tire being 90/100-10. The wheelbase is 1286 mm/48.6 in and the seat height is 765 mm/30.1 in. The wet weight of the motorcycle is 99 kg/218 lbs and the fuel capacity is 3.5 Litres/1.08 US gal. The Navi 110 was produced in 2016-17.

Technical specifications:

Make Model: Honda Navi 110

Year: 2016 – 17
Engine: Four stroke, single cylinder, SOHC, 2 valve
Capacity: 109.1 cc / 6.6 cu-in
Bore x Stroke: 50 x 55.6 mm
Cooling System: Air cooled
Compression Ratio: 9.5:1
Induction: Carburetor
Ignition: CDI
Starting: Electric & kick
Max Power: 5.91 kW / 8 hp @ 7000 rpm
Max Torque: 8.9 Nm / 6.5 lb-ft @ 5500 rpm
Transmission / Drive: V – Matic
Final Drive: Chain
Frame: Under bone
Front Suspension: Telescopic forks
Rear Suspension: Monoshock, spring loaded hydraulic type
Front Brakes: 130mm Drum
Rear Brakes: 130mm Drum
Front Tyre: 90/90-12 Tubeless
Rear Tyre: 90/100-10 Tubeless
Wheelbase: 1286 mm / 48.6 in
Seat Height: 765 mm / 30.1 in
Wet Weight: 99 kg / 218 lbs
Fuel Capacity: 3.5 Litres / 1.08 US gal

The post Honda Navi 110 (2016-17) appeared first on MotorcycleSpecifications.com.