Moto Guzzi 1000SPII Spada Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 21:48:37 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Harley Davidson XL 1200L Sportster (2006-07) https://motorcyclespecifications.com/harley-davidson-xl-1200l-sportster-2006-07-specs/ Fri, 07 Apr 2023 07:45:11 +0000 https://motorcyclespecifications.com/?p=48004 The Harley Davidson XL 1200L Sportster Low motorcycle was produced from 2006-2007. It features a four-stroke, 45-degree V-twin evolution engine, with a capacity of 1199cc and a compression ratio of

The post Harley Davidson XL 1200L Sportster (2006-07) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200L Sportster Low motorcycle was produced from 2006-2007. It features a four-stroke, 45-degree V-twin evolution engine, with a capacity of 1199cc and a compression ratio of 9.7:1. The engine is cooled by air and has pushrod-operated OHV 2 valves per cylinder. The bike uses electronic sequential port fuel injection (ESPFI) for induction and digital CDI for ignition. It has a maximum torque of 107.3 Nm at 4000 rpm and uses wet plate clutch and a 5-speed transmission. The bike has a mild steel tubular frame and circular sections with cast junctions, with rear suspension that is coil-over and dual-adjustable preload chocs. The front brake has a single 292mm disc with two-piston calipers, while the rear uses a single 260mm disc with one-piston caliper. The wheels have a front tire size of 100/90-19 57H and a rear tire size of 150/80B16 71H. The bike has a trail of 120mm, a ground clearance of 112mm, and a gross vehicle weight rating of 453.60kg. The dry weight of the bike is 257kg, and its wet weight is 263.5kg. It has a fuel capacity of 17 liters or 4.5 US gallons, and the seat height when unladen is 711.2 mm while laden is 668.0 mm.


Technical specifications:

Make Model: Harley Davidson XL 1200L Sportster Low

Year: 2006 – 07
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame, circular sections, cast junctions
Rear Suspension: Coil-over, dual-adjustable preload chocs
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29.6 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2263.1 mm / 89.1 in Width 894.1 mm / 35.2 in Height 1188.7 mm / 46.8 in
Wheelbase: 1516 mm / 59.7 in
Seat Height: Laden 668. mm / 26.30 in. Unladen 711.2 mm / 28.0 in.
Ground Clearance: 112 mm / 4.1 in
Gross Vehicle Weight Rating: 453.60 kg / 1000 lbs
Dry Weight: 257 kg / 557 lbs
Wet Weight: 263.5 kg / 581 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL 1200L Sportster (2006-07) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCF V-Rod Muscle (2009-10) https://motorcyclespecifications.com/harley-davidson-vrscf-v-rod-muscle-2009-10-specs/ Fri, 07 Apr 2023 05:17:08 +0000 https://motorcyclespecifications.com/?p=47867 The Harley Davidson VRSCF V-Rod Muscle is a motorcycle produced between 2009-2010 with a four-stroke, 60-degree V-twin engine and a capacity of 1247 cc. It has a liquid-cooled cooling system,

The post Harley Davidson VRSCF V-Rod Muscle (2009-10) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCF V-Rod Muscle is a motorcycle produced between 2009-2010 with a four-stroke, 60-degree V-twin engine and a capacity of 1247 cc. It has a liquid-cooled cooling system, electronic sequential port fuel injection, and a digital CDI ignition. The bike has a maximum torque of 86 ft/lbs at 6500 rpm and a five-speed transmission with a belt-final drive. The frame is made of steel and has hydroformed main rails with bolt-on lower frame rails that are MIG welded. The swingarm is polished, one-piece cast aluminum. The front suspension has huge 43mm forks, and the rear suspension has twin coil-over adjustable shock with 70mm wheel travel. The front brakes have two 300mm discs with four-piston calipers, and the rear brake has a single 300mm disc with a four-piston caliper. The front tire is 120/70ZR-19, and the rear tire is 240/40R-18. The motorcycle has a rake of 34 degrees and trail of 142mm/5.6 in. The dimensions of the motorcycle include a length of 2440mm/96.1 in, a wheelbase of 1705mm/67 in, a ground clearance of 114mm/4.5 in, and a seat height of laden 650 mm/25.6 in and unladen 678 mm/26.7 in. The gross vehicle weight rating is 488.0 kg/1075 lb, and the dry weight is 305.0 kg/673 lbs. The motorcycle’s oil capacity is 4.7 litres/4.50 qts, fuel capacity is 18.9 litres/5.0 gal, and average fuel consumption is 16.2 km/lit. The standing 1/4 mile is 12.0 seconds, and the top speed is 223.5 km/h.


Technical specifications:

Make Model: Harley Davidson VRSCF V-Rod Muscle

Year: 2009 – 10
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder.
Capacity: 1247 cc / 76.1 cu in
Bore x Stroke: 105 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5;1
Exhaust: Straight-shot exhaust with brushed finish dual mufflers; black end caps and exhaust shield
Induction: Electronic Sequential Port Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Torque: 86 ft/lbs / 117 Nm @ 6500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Gear, 64/117 ratio
Gear Ratio: 1st 11.75 2nd 7.898 3rd 6.322 4th 5.459 5th 4.899
Frame: Steel perimeter upper frame with hydroformed main rails and bolt-on lower frame rails; MIG welded Swingarm Polished, one-piece cast aluminum
Front Suspension: Huge 43mm forks
Rear Suspension: Twin coil over adjustable shock, 70mm wheel travel
Front Brakes: 2x 300mm discs 4 piston calipers
Rear Brakes: Single 300mm disc 4 piston caliper
Front Tyre: 120/70ZR-19
Rear Tyre: 240/40R-18
Rake (steering head): 34 degrees
Trail: 142 mm / 5.6 in
Dimensions: Length 2440 mm / 96.1 in
Wheelbase: 1705 mm / 67 in
Ground Clearance: 114 mm / 4.5 in
Seat Height: Laden 650 mm / 25.6 in Unladen 678 mm / 26.7 in.
Gross Vehicle Weight Rating: 488.0 kg / 1075 lb
Dry Weight: 305.0 kg / 673 lbs
Oil Capacity: 4.7 Litres / 4.50 qts
Fuel Capacity: 18.9 Litres / 5.0 gal
Consumption Average: 16.2 km/lit
Standing 1/4 Mile: 12.0 sec
Top Speed: 223.5 km/h

The post Harley Davidson VRSCF V-Rod Muscle (2009-10) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCA V (2004-05) https://motorcyclespecifications.com/harley-davidson-vrsca-v-2004-05-specs/ Fri, 07 Apr 2023 04:15:00 +0000 https://motorcyclespecifications.com/?p=47810 The Harley Davidson VRSCA V-Rod motorcycle was produced from 2004-05 and featured a four-stroke, 60-degree V-twin engine with a capacity of 1130cc. It had a liquid-cooled system, 11.3:1 compression ratio,

The post Harley Davidson VRSCA V (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCA V-Rod motorcycle was produced from 2004-05 and featured a four-stroke, 60-degree V-twin engine with a capacity of 1130cc. It had a liquid-cooled system, 11.3:1 compression ratio, and sequential port electronic fuel injection with 53mm throttle bodies. The bike had a maximum power output of 115hp at 8250 rpm and a maximum torque of 100.3 Nm at 7300 rpm. The transmission was a 5-speed with a final drive belt, and the frame was made of steel with a hydroformed main rail and bolt-on lower frame rails. The suspension included huge 49mm telescopic forks at the front and a dual coil over adjustable shock at the back. Brakes included dual 292mm discs with 4 piston calipers at the front and a single 292mm disc with a 4 piston caliper at the rear. The motorcycle had a rake of 34 degrees, fork angle of 38 degrees, and a wheelbase of 1713 mm. Other specifications included a 15-liter fuel capacity, 11.7 second quarter-mile time, and top speed of 218.6 km/h. The dry weight was 270.4 kg, and the wet weight was 280 kg.


Technical specifications:

Make Model: Harley Davidson VRSCA V-Rod

Year: 2004 – 05
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 115 hp / 84 kW @ 8250 rpm
Max Torque: 100.3 Nm / 74 lb-ft @ 7300 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 2.5:1 (45/18) 2nd 1.68:1 (42/25) 3rd 1.345:1 (39/29) 4th 1.161:1 (36/31) 5th 1.04:1 (26/25)
Frame: Steel perimeter upper frame w/ hydroformed main rails and bolt-on lower frame rails Swing Arm One piece cast aluminum polished
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 659.9 mm / 26.0 in – 687.8 mm / 27.1 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 270.4 kg / 595 lbs
Wet Weight: 280 kg / 615.5 lbs
Fuel Capacity: 15 Litres / 4.0 US gal
Consumption Average: 17.0 km/lit
Standing 1/4 Mile: 11.7 sec
Top Speed: 218.6 km/h

The post Harley Davidson VRSCA V (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCB V-Rod (2004-05) https://motorcyclespecifications.com/harley-davidson-vrscb-v-rod-2004-05-specs/ Fri, 07 Apr 2023 03:23:02 +0000 https://motorcyclespecifications.com/?p=47762 The Harley Davidson VRSCB V-Rod motorcycle was produced between 2004 and 2005. It has a liquid-cooled, four-stroke, 60 degrees V-twin engine with a capacity of 1130cc. It also has sequential

The post Harley Davidson VRSCB V-Rod (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCB V-Rod motorcycle was produced between 2004 and 2005. It has a liquid-cooled, four-stroke, 60 degrees V-twin engine with a capacity of 1130cc. It also has sequential port electronic fuel injection with 53mm throttle bodies, a nine-plate wet pressure-fed clutch, and a five-speed transmission with a belt final drive. The motorcycle has a maximum power of 115 hp at 8250 rpm and a maximum torque of 105 Nm at 7300 rpm. The frame is made of steel perimeter upper frame with hydroformed main rails and bolt-on lower frame rails, with a one-piece cast aluminum polished swing arm. The front suspension features huge 49mm telescopic forks and the rear suspension is dual coil-over adjustable shock. The bike also has front and rear brakes with four-piston calipers, and D207 tires. The dimensions of the motorcycle are 2375.6mm in length, a wheelbase of 1713mm, and a seat height of 660mm. It has a fuel capacity of 15 Litres and a weight of 275.0kg.


Technical specifications:

Make Model: Harley Davidson VRSCB V-Rod

Year: 2004 – 05
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 115 hp / 84 kW @ 8250 rpm
Max Torque: 105 Nm / 77.4 lb-ft @ 7300 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 2.5:1 (45/18) 2nd 1.68:1 (42/25) 3rd 1.345:1 (39/29) 4th 1.161:1 (36/31) 5th 1.04:1 (26/25)
Frame: Steel perimeter upper frame w/ hydroformed main rails and bolt-on lower frame rails Swing Arm One piece cast aluminum polished
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 660 mm / 26.0 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 275.0 kg / 606.3 lbs
Fuel Capacity: 15 Litres / 4.0 US gal

The post Harley Davidson VRSCB V-Rod (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 883L Sportster Super Low (2016-17) https://motorcyclespecifications.com/harley-davidson-xl-883l-sportster-super-low-2016-17-specs/ Fri, 07 Apr 2023 02:53:02 +0000 https://motorcyclespecifications.com/?p=47733 The Harley Davidson XL 883L Sportster SuperLow motorcycle model was produced in 2016-17 with a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine and a 883 cc

The post Harley Davidson XL 883L Sportster Super Low (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 883L Sportster SuperLow motorcycle model was produced in 2016-17 with a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine and a 883 cc / 53.9 cub in capacity. It has a chrome, staggered, shorty exhaust with dual mufflers and electronic sequential port fuel injection for induction. The maximum power output is 50.2 kW / 68 hp at 4400 rpm with a maximum torque of 73 Nm / 7.4 kgf-m / 53.8 ft/lb at 3750 rpm. The motorcycle features a multi-plate clutch with diaphragm spring in oil bath and a 5 speed transmission with chain, 34/57 primary drive and belt final drive. The frame is made of mild steel with tubular frame and circular sections, cast junctions and swingarm is mild steel, rectangular tube sections, stamped junctions, MIG welded. It has a left lean angle of 24.4o and a right lean angle of 24.7o. The front suspension consists of 39 mm telescopic forks with front wheel travel of 104 mm / 4.09 in and rear suspension features a coil-over, dual-adjustable preload with rear wheel travel of 64 mm / 2.5 in. The front brakes consist of a single 300 mm disc and 2 x 38mm piston calipers.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster SuperLow

Year: 2016 – 17
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 883 cc / 53.9 cub in.
Bore x Stroke: 76.2 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Exhaust: Chrome, staggered, shorty exhaust with dual mufflers
Induction: Electronic Sequential Port Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 50.2 kW / 68 hp @ 4400 rpm
Max Torque: 73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm
Clutch: Multi-plate clutch with diaphragm spring in oil bath
Transmission: 5 Speed
Primary Drive: Chain, 34/57
Final Drive: Belt
Gear Ratio: 1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93:1
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Lean Angle, Left: 24.4o
Lean Angle, Right: 24.7o
Front Suspension: 39 mm Telescopic forks
Front Wheel Travel: 104 mm / 4.09 in
Rear Suspension: Coil-over, dual-adjustable preload
Rear Wheel Travel: 64 mm / 2.5 in
Front Brakes: Single 300 mm disc, 2 x 38mm piston calipers

The post Harley Davidson XL 883L Sportster Super Low (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCD Night Rod (2007) https://motorcyclespecifications.com/harley-davidson-vrscd-night-rod-2007-specs/ Fri, 07 Apr 2023 00:57:55 +0000 https://motorcyclespecifications.com/?p=47627 The Harley Davidson VRSCD Night Rod is a motorcycle model from 2007 equipped with a 1130cc V-twin engine, producing 121 horsepower at 7000 RPM and 108.3 Nm of torque at

The post Harley Davidson VRSCD Night Rod (2007) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCD Night Rod is a motorcycle model from 2007 equipped with a 1130cc V-twin engine, producing 121 horsepower at 7000 RPM and 108.3 Nm of torque at 7000 RPM. It has a liquid cooling system, 5-speed transmission with a belt final drive, and a steel perimeter frame with bolt-on lower rails. The front suspension consists of 49mm telescopic forks with a 100mm wheel travel, while the rear suspension is a dual coil-over adjustable shock with a 70mm wheel travel. The motorcycle comes with front and rear brakes, with the front featuring two 292mm discs and four-piston calipers. The rear brake is a single 292mm disc with a four-piston caliper. The VRSCD Night Rod’s dimensions are 2375.6 mm in length with a wheelbase of 1713 mm, a seat height of 660 mm, and a ground clearance of 142mm. It weighs 275.0 kg and has a fuel capacity of 14 litres. Overall, it is a powerful and sturdy motorcycle with impressive performance capabilities.


Technical specifications:

Make Model: Harley Davidson VRSCD Night Rod

Year: 2007
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 121 hp / 89 Kw @ 7000 rpm
Max Torque: 108.3 Nm / 80 lb-ft @ 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 (10.969) 2nd 7.898 (7.371) 3rd 6.322 (5.900) 4th 5.459 (5.095) 5th 4.899 (4.563)
Frame: Steel perimeter upper frame w/hydro formed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 660 mm / 26.0 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 275.0 kg / 606.3 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Harley Davidson VRSCD Night Rod (2007) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200C Sportster Custom (2002-03) https://motorcyclespecifications.com/harley-davidson-xl-1200c-sportster-custom-2002-03-specs/ Thu, 06 Apr 2023 21:28:40 +0000 https://motorcyclespecifications.com/?p=47441 The Harley Davidson XL 1200C Sportster Custom is a motorcycle made in 2002-03. It features a four-stroke, 45-degree V-twin, OHV engine with a capacity of 1199cc/73.2 cubic inches and is

The post Harley Davidson XL 1200C Sportster Custom (2002-03) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200C Sportster Custom is a motorcycle made in 2002-03. It features a four-stroke, 45-degree V-twin, OHV engine with a capacity of 1199cc/73.2 cubic inches and is air-cooled with a compression ratio of 9.7:1. A carburetor induction system is used along with digital CDI ignition and electric starting. It produces a maximum power of 58.5hp/42.6 kW @ 5200 rpm and max torque of 87 Nm / 64 lb-ft @ 3900 rpm. The motorcycle comes with a 5-speed transmission and belt final drive. The frame is made of mild steel, tubular frame with circular sections, and cast junctions. The swingarm is also made of mild steel with rectangular tube sections and stamped junctions. The front suspension features 39mm forks, and the rear suspension is coil-over with dual-adjustable preload. The front and rear brakes are single 292mm discs with a 2-piston caliper and 1-piston caliper, respectively. The front tyre is a D402F MH90-21 54H, and the rear is a D401 150/80B16 71H. The rake is 30 degrees, and the trail is 107 mm/4.2 in. The motorcycle’s length is 2293.6 mm/90.3 in, with a wheelbase of 1534/60.4 in, a seat height of 710.0 mm / 28.0 in, and a ground clearance of 110 mm / 4.3 in. The dry weight of the bike is 251 kg / 554 lbs, and wet weight is 267 kg / 589 lbs. It has a fuel capacity of 17 Litres / 4.5 gal.


Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom

Year: 2002 – 03
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cub in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled,
Compression Ratio: 9.7:1
Induction: Carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 58.5 hp / 42.6 kW @ 5200 rpm
Max Torque: 87 Nm / 64 lb-ft @ 3900 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 9.647 9.315 9.004 2nd 6.891 6.653 6.432 3rd 5.125 4.948 4.783 4th 4.248 4.102 3.965 5th 3.643 3.517 3.400
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm discs 2 piston caliper
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: D402F MH90-21 54H
Rear Tyre: D401 150/80B16 71H
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2293.6 mm / 90.3 in
Wheelbase: 1534 / 60.4 in
Seat Height: 710.0 mm / 28.0 in
Ground Clearance: 110 mm / 4.3 in
Dry Weight: 251 kg / 554 lbs
Wet Weight: 267 kg / 589 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Harley Davidson XL 1200C Sportster Custom (2002-03) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200N Nightster (2011-12) https://motorcyclespecifications.com/harley-davidson-xl-1200n-nightster-2011-12-specs/ Thu, 06 Apr 2023 19:50:03 +0000 https://motorcyclespecifications.com/?p=47353 The Harley Davidson XL 1200N Nightster is a motorcycle that was produced between 2011 and 2012. It has a four-stroke, 45 degrees V-Twin Evolution engine with a capacity of 1199cc.

The post Harley Davidson XL 1200N Nightster (2011-12) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200N Nightster is a motorcycle that was produced between 2011 and 2012. It has a four-stroke, 45 degrees V-Twin Evolution engine with a capacity of 1199cc. The bore x stroke measurements are 88.8 x 96.8 mm and the compression ratio is 9.7:1. The Nightster uses pushrod-operated, OHV, 2 valves per cylinder valve train and has electronic sequential port fuel injection (ESPFI) as the induction system. The maximum torque for this motorcycle is 107.3 Nm / 79 lb-ft at 4000 rpm. It uses a clutch that is wet and has nine plates. The transmission is 5-speed, with the final drive using a belt and the primary drive using a chain with a 57/38 ratio. The frame is made of mild steel tubing with cast junctions, and the swingarm uses mild steel rectangular tubing with MIG welding. The front suspension consists of 39mm fork tubes, while the rear has a coil-over, dual-adjustable preload. The front and rear brakes both use a single 292mm disc. The front and rear tires are 100/90B19 57H and 150/80B16 77H, respectively, with a rake of 30.5 degrees and a trail of 117mm / 4.8 in. The dimensions for the Nightster are 2179 mm / 85.8 in in Length, a wheelbase of 1519 mm / 59.8 in, a laden seat height of 653 mm / 25.7 in, an unladen seat height of 683 mm / 26.9 in, and a ground clearance of 100 mm / 4.7 in. The dry weight of the motorcycle is 252 kg / 335 lbs, and the wet weight is 301 kg / 665 lbs. The fuel capacity is 12.5 litres / 3.3 US gal.


Technical specifications:

Make Model: Harley Davidson XL 1200N Nightster

Year: 2011 – 12
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: 100/90B19 57H
Rear Tyre: 150/80B16 77H
Rake: 30.5 degrees
Trail: 117 mm / 4.8 in
Dimensions: Length 2179 mm / 85.8 in
Wheelbase: 1519 mm / 59.8 in
Seat Height: Laden 653 mm / 25.7 in Unladen 683 mm / 26.9 in
Ground Clearance: 100 mm / 4.7 in
Dry Weight: 252 kg / 335 lbs
Wet Weight: 301 kg / 665 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Harley Davidson XL 1200N Nightster (2011-12) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHX Street Glide Special (2018) https://motorcyclespecifications.com/harley-davidson-flhx-street-glide-special-2018-specs-2/ Thu, 06 Apr 2023 18:45:11 +0000 https://motorcyclespecifications.com/?p=47296 The Harley Davidson FLHX Street Glide Special (2018) motorcycle has a four-stroke, V-Twin, Milwaukee-Eight 107 engine with a capacity of 1746 cc and a compression ratio of 10.0:1. It has

The post Harley Davidson FLHX Street Glide Special (2018) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHX Street Glide Special (2018) motorcycle has a four-stroke, V-Twin, Milwaukee-Eight 107 engine with a capacity of 1746 cc and a compression ratio of 10.0:1. It has a black, 2-1-2 dual exhaust with tapered mufflers and electronic sequential port fuel injection, with a pressurized, dry-sump lubrication system. The transmission is a six-speed and the final drive is a belt. The bike has a mild steel frame with a square-section backbone and twin downtubes, with a 41.3 mm telescopic front suspension and short, air-adjustable shock rear suspension. Front and rear brakes are both caliper type 32 mm, 4-piston fixed, and the bike has a 9-inch black, talon cast aluminum front wheel and a black, talon cast aluminum rear wheel. The front and rear tires are 130/60B19 61H and 180/65B16 81H, respectively. The rake is 26 degrees, with a fork angle of 29.2 degrees and a trail of 173mm. The bike is 2425 mm in length, with a wheelbase of 1625 mm, and a laden seat height of 663 mm and an unladen seat height of 690 mm, with a ground clearance of 125 mm. The dry weight of the bike is 362 kg and the wet weight is 379 kg. The fuel capacity is 22.7 litres, or 6.0 gallons.


Technical specifications:

Make Model: Harley Davidson Street Glide Special

Year: 2018
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in
Bore x Stroke: 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Black, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm
Clutch: Hydraulically actuated 9 plate wet, Assist & Slip
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Frame: Mild steel, square-section backbone with twin downtubes
Front Suspension: 41.3 mm telescopic, cartridge-style damping,
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Short, air-adjustable shock,
Rear Wheel Travel: 51 mm / 2.0 in
Front Brakes: Caliper Type 32 mm, 4-piston fixed
Rear Brakes: Caliper Type 32 mm, 4-piston fixed
Front Wheel: 9 Black, Talon Cast Aluminum
Rear Wheel: Black, Talon Cast Aluminum
Front Tyre: 130/60B19 61H
Rear Tyre: 180/65B16 81H
Rake: 26 degrees
Fork Angle: 29.2 degrees
Trail: 173mm / 6.8 in
Dimensions: Length 2425 mm / 96.5 in
Wheelbase: 1625 mm / 64 in
Seat Height: Laden 7 663 mm / 26.1 in Unladen 690 mm / 27.2 in
Ground Clearance: 125 mm / 4.9 in
Dry Weight: 362 kg / 798 lbs
Wet Weight: 379 kg / 836 lbs
Fuel Capacity: 22.7 Litres / US 6.0 gal

The post Harley Davidson FLHX Street Glide Special (2018) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 50 50th Anniversary Sportster Limited Edition (2007) https://motorcyclespecifications.com/harley-davidson-xl-50-50th-anniversary-sportster-limited-edition-2007-specs/ Thu, 06 Apr 2023 12:44:12 +0000 https://motorcyclespecifications.com/?p=46971 The Harley Davidson XL 50 50th Anniversary Sportster Limited Edition is a motorcycle released in 2007 with an air-cooled, four-stroke V-twin engine that has two valves per cylinder and a

The post Harley Davidson XL 50 50th Anniversary Sportster Limited Edition (2007) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 50 50th Anniversary Sportster Limited Edition is a motorcycle released in 2007 with an air-cooled, four-stroke V-twin engine that has two valves per cylinder and a capacity of 1199. It has an Electronic Sequential Port Fuel Injection (ESPFI) and an electric starting system. The compression ratio is 9.7:1, and the bike can produce a maximum torque of 107.3 Nm at 4000 rpm. The transmission has five speeds, and the bike is driven by a belt.

The frame of the Harley Davidson XL 50 50th Anniversary Sportster Limited Edition is made of mild steel tubular with circular sections and cast junctions. The front suspension uses 39mm forks, and the rear suspension is coil-over and has a preload dual-adjustable feature. The bike has single 292mm disc brakes with a 2 piston caliper for the front wheel and a single 292mm disc brake with 1 piston caliper for the rear wheel. The front and rear tyre sizes are 100/90-19 and 150/80B16, respectively.

The dry weight of the bike is 253 kg, and it has a fuel capacity of 12.5 litres. Overall, the Harley Davidson XL 50 50th Anniversary Sportster Limited Edition is a powerful and stylish motorcycle that offers a smooth and comfortable ride.


Technical specifications:

Make Model: Harley Davidson XL 50 50th Anniversary Sportster Limited Edition

Year: 2007
Engine: Air cooled, four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199
Bore x Stroke: 88.8 x 96.8 mm
Compression Ratio: 9.7:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition / Starting: – / electric
Max Power:
Max Torque: 107.3 Nm 79.1 ft. lbs @ 4000 rpm
Transmission / Drive: 5 Speed / Belt
Frame: Mild steel tubular frame; circular sections; cast junctions
Front Suspension: 39 mm forks
Rear Suspension: Coil-over; preload dual-adjustable
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 150/80B16
Dry Weight: 253 kg
Fuel Capacity: 12.5 Litres

The post Harley Davidson XL 50 50th Anniversary Sportster Limited Edition (2007) appeared first on MotorcycleSpecifications.com.

]]>
Aermacchi / Harley Davidson SX 175 (1975) https://motorcyclespecifications.com/aermacchi-harley-davidson-sx-175-1975-specs/ Thu, 06 Apr 2023 11:21:59 +0000 https://motorcyclespecifications.com/?p=46896 The Aermacchi/Harley Davidson SX 175 (1975) motorcycle is a two-stroke, single cylinder bike with a 174 capacity engine. It has a bore x stroke of 61 x 59.6 mm and

The post Aermacchi / Harley Davidson SX 175 (1975) appeared first on MotorcycleSpecifications.com.

]]>
The Aermacchi/Harley Davidson SX 175 (1975) motorcycle is a two-stroke, single cylinder bike with a 174 capacity engine. It has a bore x stroke of 61 x 59.6 mm and is air-cooled with a compression ratio of 10.7:1. The lubrication is fuel and oil mixture and it has a Dell’Orto VHB 27 AD induction.

The bike starts with a primary kick and has a wet, multi-plate clutch with a five-speed transmission. The front suspension features an oil damper Ceriant telescopic fork, while the rear suspension has a pivoted fork and Betor dampers with 3-way adjustment. The final drive is a chain and the front and rear brake systems use drums. The front tyre is 3.00-19 and the rear tyre is 3.50-18.

The seat height is 749mm or 29.5 inches and the dry weight of the bike is 112 kg or 247 lbs. The fuel capacity is 10.5 litres or 2.7 US gallons.


Technical specifications:

Make Model: Aermacchi / Harley Davidson SX 175

Year: 1975
Engine: Two stroke, single cylinder
Capacity: 174
Bore x Stroke: 61 x 59.6 mm
Cooling System: Air cooled
Compression Ratio: 10.7:1
Lubrication: Fuel and oil mixture
Induction: Dell’Orto VHB 27 AD
Starting: Primary kick
Max Power:
Clutch: Wet, multi plate
Transmission: 5 Speed
Front Suspension: Oil damper Ceriant telescopic fork
Rear Suspension: Pivoted fork and Betor dampers 3-way adjustment
Final Drive: Chain
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-19
Rear Tyre: 3.50-18
Seat Height: 749 mm / 29.5 in
Dry Weight: 112 kg / 247 lbs
Fuel Capacity: 10.5 Litres / 2.7 US gal

The post Aermacchi / Harley Davidson SX 175 (1975) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200X Forty-Eight (2016-17) https://motorcyclespecifications.com/harley-davidson-xl1200x-forty-eight-2016-17-specs/ Thu, 06 Apr 2023 09:14:06 +0000 https://motorcyclespecifications.com/?p=46777 The Harley Davidson XL1200X Forty-Eight model was produced from 2016-2017. It has a four-stroke, air-cooled Evolution engine with a capacity of 1202cc and a compression ratio of 10.0:1. The exhaust

The post Harley Davidson XL1200X Forty-Eight (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL1200X Forty-Eight model was produced from 2016-2017. It has a four-stroke, air-cooled Evolution engine with a capacity of 1202cc and a compression ratio of 10.0:1. The exhaust features shorty-dual blacked-out mufflers, and the bike uses electronic sequential port fuel injection for induction. The digital CDI ignition system is electrically started. The bike has a maximum torque of 96 Nm at 3500 rpm and a 5-speed transmission with a belt final drive. The frame is made from mild steel, with circular and cast sections, and the swingarm is also mild steel with rectangular tube sections. The bike has front forks with cartridge dampening technology and emulsion technology rear shocks with a range of pre-load adjustability. The bike has a single 300mm disc with two 38mm piston calipers for the front and rear brakes. The wheels are cast aluminum, 9 double-spoke, black with machined highlights, with a 130/90 B16 73H tire in the front and a 150/80 B16 77H in the rear. The rake is 29.6 degrees, and the trail is 132 mm. The bike is 2210 mm in length, has a wheelbase of 1495 mm, and a seat height of 710 mm. It weighs 252 kg and has a fuel capacity of 7.9 L.


Technical specifications:

Make Model: Harley Davidson XL 1200X Forty-Eight

Year: 2016 – 17
Engine: Evolution(R), four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1202 cc / 73.4 cu in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Shorty-dual exhaust with blacked out mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 96 Nm / 9.8 kgf-m / 70.8 ft/lbs./ @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive Chain: 38/57 ratio
Gear Ratio: 1st 9.004 / 2nd 6.432 / 3rd 4.783 / 4th 3.965 / 5th 3.400:1
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: Front forks with cartridge dampening technology
Rear Suspension: Emulsion technology rear shocks with 50 mm range of pre-load adjustability and an under-seat, rear shock suspension adjustment wrench
Front Brakes: Single 300mm disc, 2 x 38mm piston calipers
Rear Brakes: Single 300mm disc, 2 x 38mm piston calipers
Front Wheel: Cast aluminium, 9 double spoke, black, machined highlights
Rear Wheel: Cast aluminium, 9 double spoke, black, machined highlights
Front Tyre: 130/90 B16 73H
Rear Tyre: 150/80 B16 77H
Rake: 29.6 degrees
Trail: 132 mm / 5.2 in.
Dimensions: Length 2210 mm / 87.0 in
Wheelbase: 1495 mm / 58.9 in.
Seat Height: Unladen 710 mm / 28.0 in.
Ground Clearance: 110 mm / 4.3 in
Lean Angle (Left): 27.1o
Lean Angle (Right): 27.1o
Wet Weight: 252 kg / 556 lbs
Oil Capacity: 2.6 L / 0.69 US gal
Fuel Capacity: 7.9 L / 2.1 US gal

The post Harley Davidson XL1200X Forty-Eight (2016-17) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson Street Glide Special 114 (2019) https://motorcyclespecifications.com/harley-davidson-street-glide-special-114-2019-specs/ Wed, 05 Apr 2023 21:01:03 +0000 https://motorcyclespecifications.com/?p=46113 The Harley Davidson Street Glide Special 114 (2019) motorcycle has a Milwaukee-Eight 114 four-stroke V-twin engine with a capacity of 1868 cc and 4 valves per cylinder. The engine has

The post Harley Davidson Street Glide Special 114 (2019) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson Street Glide Special 114 (2019) motorcycle has a Milwaukee-Eight 114 four-stroke V-twin engine with a capacity of 1868 cc and 4 valves per cylinder. The engine has electronic sequential port fuel injection and a compression ratio of 10.5:1. The maximum torque is 167 Nm at 3250 rpm. The clutch is hydraulically actuated with a 9 plate wet assist and slip system, and the transmission has 6 speeds with a belt final drive and chain primary drive. The frame is mild steel with twin downtubes, and the suspension system consists of 41.3 mm telescopic front suspension and a short, air-adjustable rear shock. Both the front and rear brakes have 32 mm calipers with 4-piston fixed systems. The wheels are black, Talon cast aluminum with the front tire size at 130/60B19 61H and the rear tire size at 180/55B18 80H. The motorcycle has a rake of 26 degrees, a fork angle of 29.2 degrees, and a trail of 173mm. The length of the bike is 2425 mm, and the wheelbase is 1625 mm. The seat height is 663 mm when laden and 690 mm when unladen, with a ground clearance of 125 mm. The dry weight is 362 kg, and the wet weight is 379 kg. The fuel capacity of the Harley Davidson Street Glide Special 114 is 22.7 liters or US 6.0 gallons.


Technical specifications:

Make Model: Harley Davidson Street Glide Special 114

Year: 2019
Engine: Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1868 cc / 114 cu in
Bore x Stroke: 102 x 114 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Exhaust: Black, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 167 Nm / 122 lb-ft @ 3250 rpm
Clutch: Hydraulically actuated 9 plate wet, Assist & Slip
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Frame: Mild steel, square-section backbone with twin downtubes
Front Suspension: 41.3 mm telescopic, cartridge-style damping,
Front Wheel Travel: 117 mm / 4.6 in
Rear Suspension: Short, air-adjustable shock,
Rear Wheel Travel: 51 mm / 2.0 in
Front Brakes: Caliper Type 32 mm, 4-piston fixed
Rear Brakes: Caliper Type 32 mm, 4-piston fixed
Front Wheel: 9 Black, Talon Cast Aluminum
Rear Wheel: Black, Talon Cast Aluminum
Front Tyre: 130/60B19 61H
Rear Tyre: 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Rake: 26 degrees
Fork Angle: 29.2 degrees
Trail: 173mm / 6.8 in
Dimensions: Length 2425 mm / 95.5 in
Wheelbase: 1625 mm / 64 in
Seat Height: Laden 7 663 mm / 26.1 in Unladen 690 mm / 27.2 in
Ground Clearance: 125 mm / 4.9 in
Dry Weight: 362 kg / 798 lbs
Wet Weight: 379 kg / 836 lbs
Fuel Capacity: 22.7 Litres / US 6.0 gal

The post Harley Davidson Street Glide Special 114 (2019) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200 Forty-Eight (2015) https://motorcyclespecifications.com/harley-davidson-xl1200-forty-eight-2015-specs/ Wed, 05 Apr 2023 20:43:00 +0000 https://motorcyclespecifications.com/?p=46096 The Harley Davidson XL1200 Forty-Eight is a 2015 motorcycle with a four-stroke, 45-degree V-twin, OHV, two valves per cylinder engine with a capacity of 1199cc/73.2 cu in. It has a

The post Harley Davidson XL1200 Forty-Eight (2015) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL1200 Forty-Eight is a 2015 motorcycle with a four-stroke, 45-degree V-twin, OHV, two valves per cylinder engine with a capacity of 1199cc/73.2 cu in. It has a chrome, staggered shorty exhaust with dual slash-cut mufflers and electronic sequential port fuel injection (ESPFI) induction. The bike has a mild steel, tubular frame with circular sections and cast junctions and a mild steel, rectangular tube sections, stamped junctions; MIG welded swingarm. The front suspension is a 39mm fork, while the rear suspension is coil-over with preload dual-adjustable function. The front and rear brakes are both single 300mm discs with 2 x 38mm piston calipers. It has black, laced steel spoke wheels and an MT90B16 front tire and 150/80-B16 rear tire. The bike is 2255mm/88.7in in length with a wheelbase of 1520mm/59.8in and a seat height of 660mm/26.0in (laden) and 681mm/26.8in (unladen). It has a wet weight of 257.2kg/567lbs, a gross vehicle weight rating of 453.6kg/1000lbs, an oil capacity of 2.6 liters/0.69 US gal, and a fuel capacity of 13.7 liters/3.6 US gal.


Technical specifications:

Make Model: Harley Davidson XL 1200X Forty-Eight

Year: 2015
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cu in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Exhaust: Chrome, staggered shorty exhaust with dual slash-cut mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107 Nm / 10.9 kgf-m / 79 ft/lbs./ @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive Chain: 38/57 ratio
Gear Ratio: 1st 9.315 / 2nd 6.653 / 3rd 4.948 / 4th 4.102 / 5th 3.517:1
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Fork
Front Wheel Travel: 114 mm / 5.7 in.
Rear Suspension: Coil-over; preload dual-adjustable
Rear Wheel Travel: 54 mm / 2.1 in.
Front Brakes: Single 300mm disc, 2 x 38mm piston calipers
Rear Brakes: Single 300mm disc, 2 x 38mm piston calipers
Front Wheel: Black, laced steel spokes
Rear Wheel: Black, laced steel spokes
Front Tyre: MT90B16
Rear Tyre: 150/80-B16
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2255 mm / 88.7 in
Wheelbase: 1520 / 59.8 in
Seat Height: Laden 660 mm / 26.0 in Unladen 681 mm / 26.8 in.
Ground Clearance: 100 mm / 3.9 in
Wet Weight: 257.2 kg / 567 lbs
Gross Vehicle Weight Rating: 453.6 kg / 1000 lbs
Oil Capacity: 2.6 Litres / 0.69 US gal
Fuel Capacity: 13.7 Litres / 3.6 US gal

The post Harley Davidson XL1200 Forty-Eight (2015) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200L Sportster Low (2010-11) https://motorcyclespecifications.com/harley-davidson-xl-1200l-sportster-low-2010-11-specs/ Wed, 05 Apr 2023 18:45:01 +0000 https://motorcyclespecifications.com/?p=45991 The Harley Davidson XL 1200L Sportster Low was produced from 2010 to 2011 and features a four-stroke, 45 degree V-twin evolution engine. The capacity of the engine is 1199cc and

The post Harley Davidson XL 1200L Sportster Low (2010-11) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200L Sportster Low was produced from 2010 to 2011 and features a four-stroke, 45 degree V-twin evolution engine. The capacity of the engine is 1199cc and it has a compression ratio of 9.7:1. The motorcycle is air-cooled and has an electronic sequential port fuel injection induction system. It has a digital CDI ignition and an electric starting system. The maximum torque the motorcycle can achieve is 107.3Nm at 4000 rpm. The motorcycle has a wet 9-plate clutch and a 5-speed transmission system. Its final drive is a belt and its primary drive is a chain with a 57/38 ratio. The motorcycle has a mild steel, tubular frame with circular sections and cast junctions. Its coil-over rear suspension has dual-adjustable preload shocks. Its front and rear brakes are single 292mm and 260mm discs, respectively. The motorcycle’s front and rear tires are 100/90-19 57H and 150/80B16 71H, respectively. It has a rake of 29.6 degrees and a trail of 120mm. The motorcycle’s length, width, and height are 2263.1mm, 894.1mm, and 1188.7mm, respectively. Its wheelbase is 1516mm and its seat height (laden) is 668mm. The motorcycle has a gross vehicle weight rating of 453.60kg and a dry weight of 257kg. Its fuel capacity is 17 liters (4.5 US gallons).


Technical specifications:

Make Model: Harley Davidson XL 1200L Sportster Low

Year: 2010 – 11
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame, circular sections, cast junctions
Rear Suspension: Coil-over, dual-adjustable preload chocs
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29.6 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2263.1 mm / 89.1 in Width 894.1 mm / 35.2 in Height 1188.7 mm / 46.8 in
Wheelbase: 1516 mm / 59.7 in
Seat Height: Laden 668. mm / 26.30 in. Unladen 711.2 mm / 28.0 in.
Ground Clearance: 112 mm / 4.1 in
Gross Vehicle Weight Rating: 453.60 kg / 1000 lbs
Dry Weight: 257 kg / 557 lbs
Wet Weight: 263.5 kg / 581 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL 1200L Sportster Low (2010-11) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson Ultra Limited Low (2019) https://motorcyclespecifications.com/harley-davidson-ultra-limited-low-2019-specs/ Wed, 05 Apr 2023 18:31:08 +0000 https://motorcyclespecifications.com/?p=45979 The Harley Davidson FLHTK Electra Glide Ultra Limited Low motorcycle is a 2019 model with a four-stroke, V-twin Milwaukee-Eight 114 engine. It has a capacity of 1868cc/114cu in and a

The post Harley Davidson Ultra Limited Low (2019) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHTK Electra Glide Ultra Limited Low motorcycle is a 2019 model with a four-stroke, V-twin Milwaukee-Eight 114 engine. It has a capacity of 1868cc/114cu in and a compression ratio of 10.5:1. The engine is air-cooled and has electronic sequential port fuel injection.

The bike has a six-speed transmission with a chain primary drive and a belt final drive. It has two 300mm front discs and a single 300mm rear disc for braking. The front suspension is a 41.3mm telescopic, cartridge-style damping and the rear suspension is a swingarm with air-adjustable rear shocks.

The Harley Davidson Ultra Limited Low has a mild steel tubular frame with a two-piece stamped and welded backbone, twin downtubes, and bolt-on rear frame. The front and rear wheels are Contrast Chrome Impeller Cast Aluminum with a front tire size of BW 130/80B17 65H and a rear tire size of BW 180/65B16 81H.

The bike has a rake of 26 degrees, a trail of 170mm/6.7 inches, and a ground clearance of 115mm/4.5 inches. Its length is 2600mm/102.3 inches, wheelbase is 1625mm/64 inches, and seat height is laden 650 mm/25.6 inches or unladen 675mm/26.6 inches.

The Harley Davidson Ultra Limited Low weighs 396kg/873lbs dry and 412kg/908lbs wet. Its fuel capacity is 22.7 litres/6 US gal.


Technical specifications:

Make Model: Harley Davidson FLHTK Electra Glide Ultra Limited Low

Year: 2019
Engine: Four stroke, V-Twin, Milwaukee-Eight 114, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1868 cc / 114 cu in
Bore x Stroke: 102 x 114 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Exhaust: Chrome, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 167 Nm /122 lb-ft @ 3250 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded
Lean Angle Right: 32 degrees
Lean Angle Left: 32 degrees
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded, Rear Shocks Air-adjustable
Front Brakes: 2 x 300mm discs, 4 piston fixed
Rear Brakes: Single 300 mm disc, 4 piston fixed
Wheels Front: Contrast Chrome Impeller Cast Aluminum
Wheels Rear: Contrast Chrome Impeller Cast Aluminum
Front Tyre: BW 130/80B17 65H
Rear Tyre: BW 180/65B16 81H
Rake: 26 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2600 mm / 102.3 in
Wheelbase: 1625 mm / 64 in
Seat Height: Laden 650 mm / 25.6 in Unladen 675 mm / 26.6 in
Ground Clearance: 115 mm / 4.5 in
Dry Weight: 396 kg / 873 lbs
Wet Weight: 412 kg / 908 lbs
Fuel Capacity: 22.7 Litres / 6 US gal

The post Harley Davidson Ultra Limited Low (2019) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200 Forty-Eight (2011) https://motorcyclespecifications.com/harley-davidson-xl1200-forty-eight-2011-specs/ Wed, 05 Apr 2023 16:39:02 +0000 https://motorcyclespecifications.com/?p=45879 The Harley Davidson XL1200 Forty-Eight is a 2011 motorcycle with a 1199 cc 4-stroke V-Twin engine and air cooling system. It has a compression ratio of 9.7:1 and electronic sequential

The post Harley Davidson XL1200 Forty-Eight (2011) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL1200 Forty-Eight is a 2011 motorcycle with a 1199 cc 4-stroke V-Twin engine and air cooling system. It has a compression ratio of 9.7:1 and electronic sequential port fuel injection. Its maximum torque is 107 Nm at 3500 rpm and it has a 5-speed transmission with a belt final drive. The frame is made of mild steel and has circular sections and cast junctions, while the swingarm is also made of mild steel and has rectangular tube sections and stamped junctions that are MIG welded. The front suspension is a 39mm fork with 114 mm of travel, and the rear suspension is a coil-over system with dual-adjustable preload and 54 mm of travel. The brakes are single 300mm discs with 2 x 38mm piston calipers for both the front and rear. The wheels are black, laced steel spokes with a MT90B16 front tyre and 150/80-B16 rear tyre. The rake is 30 degrees with a trail of 107 mm, and it has a length of 2255 mm and a wheelbase of 1520 mm. The seat height is 660 mm when laden and 681 mm when unladen, with a ground clearance of 100 mm. The wet weight of the motorcycle is 257.2 kg and its gross vehicle weight rating is 453.6 kg. It has an oil capacity of 2.6 L and a fuel capacity of 13.7 L.


Technical specifications:

Make Model: Harley Davidson XL 1200X Forty-Eight

Year: 2011
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cu in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Exhaust: Chrome, staggered shorty exhaust with dual slash-cut mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107 Nm / 10.9 kgf-m / 79 ft/lbs./ @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive Chain: 38/57 ratio
Gear Ratio: 1st 9.315 / 2nd 6.653 / 3rd 4.948 / 4th 4.102 / 5th 3.517:1
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Fork
Front Wheel Travel: 114 mm / 5.7 in.
Rear Suspension: Coil-over; preload dual-adjustable
Rear Wheel Travel: 54 mm / 2.1 in.
Front Brakes: Single 300mm disc, 2 x 38mm piston calipers
Rear Brakes: Single 300mm disc, 2 x 38mm piston calipers
Front Wheel: Black, laced steel spokes
Rear Wheel: Black, laced steel spokes
Front Tyre: MT90B16
Rear Tyre: 150/80-B16
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2255 mm / 88.7 in
Wheelbase: 1520 / 59.8 in
Seat Height: Laden 660 mm / 26.0 in Unladen 681 mm / 26.8 in.
Ground Clearance: 100 mm / 3.9 in
Wet Weight: 257.2 kg / 567 lbs
Gross Vehicle Weight Rating: 453.6 kg / 1000 lbs
Oil Capacity: 2.6 L / 0.69 US gal
Fuel Capacity: 13.7 L / 3.6 US gal

The post Harley Davidson XL1200 Forty-Eight (2011) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCF V-Rod Muscle (2013) https://motorcyclespecifications.com/harley-davidson-vrscf-v-rod-muscle-2013-specs/ Wed, 05 Apr 2023 14:34:00 +0000 https://motorcyclespecifications.com/?p=45764 The Harley Davidson VRSCF V-Rod Muscle is a 2013 motorcycle with a 1247cc engine that can generate a maximum power of 122 hp at 8250 rpm and maximum torque of

The post Harley Davidson VRSCF V-Rod Muscle (2013) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCF V-Rod Muscle is a 2013 motorcycle with a 1247cc engine that can generate a maximum power of 122 hp at 8250 rpm and maximum torque of 115 Nm at 6500 rpm. It has a liquid cooling system and a compression ratio of 11.5:1. The motorcycle has a 5-speed transmission and belt final drive. It features a steel perimeter upper frame with hydroformed main rails, bolt-on lower frame rails, and swingarm polished, one-piece cast aluminum. With 32 degrees lean angle on both left and right, the motorcycle has a huge 43 mm fork front suspension and twin coil over adjustable shock rear suspension. The braking system includes two 300mm discs with 4 piston calipers on the front and one 300mm disc with 4 piston caliper on the rear. The black 5-spoke, cast aluminum wheels complete the sleek and modern design.


Technical specifications:

Make Model: Harley Davidson VRSCF V-Rod Muscle

Year: 2013
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder, Revolution.
Capacity: 1247 cc / 76.1 cu in
Bore x Stroke: 105 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Exhaust: Satin chrome, dual side exhaust system with black end caps
Induction: Electronic Sequential Port Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 91 kW / 122 hp @ 8250 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 85 ft/lbs @ 6500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Gear, 64/117 ratio
Gear Ratio: 1st 110.969 / 2nd 7.371 / 3rd 5.900 / 4th 5.095 / 5th 4.563:1
Frame: Steel perimeter upper frame with hydroformed main rails and bolt-on lower frame rails; MIG welded Swingarm Polished, one-piece cast aluminum
Lean Angle, Left: 32o
Lean Angle, Right: 32o
Front Suspension: Huge 43 mm forks
Rear Suspension: Twin coil over adjustable shock
Front Brakes: 2 x 300mm discs, 4 piston calipers
Rear Brakes: Single 300 mm disc, 4 piston caliper
Wheels, Front and Rear: Black, 5-spoke, cast aluminum

The post Harley Davidson VRSCF V-Rod Muscle (2013) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200C Sportster Custom (2004-05) https://motorcyclespecifications.com/harley-davidson-xl-1200c-sportster-custom-2004-05-specs/ Wed, 05 Apr 2023 12:24:12 +0000 https://motorcyclespecifications.com/?p=45644 The Harley Davidson XL 1200C Sportster Custom was produced from 2004-05 and is equipped with a four-stroke, 45-degree V-twin engine with a capacity of 1199cc. The bike has a compression

The post Harley Davidson XL 1200C Sportster Custom (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200C Sportster Custom was produced from 2004-05 and is equipped with a four-stroke, 45-degree V-twin engine with a capacity of 1199cc. The bike has a compression ratio of 9.7:1 and a maximum power of 58.5 hp at 5200 rpm. It has a five-speed transmission with a final drive belt and offers a maximum torque of 87 Nm at 3900 rpm. The frame is made of mild steel, tubular frame, circular sections, cast junctions while the rear suspension is coil-over, dual-adjustable preload. The bike also offers front and rear disc brakes and has a ground clearance of 110 mm. Its seat height when unladen is 28.5 in and 26.6 in when laden. The fuel capacity is up to 17 litres or 4.5 gallons. The bike weighs 251 kg when dry and 267 kg when wet.


Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom

Year: 2004 – 05
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cub in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled,
Compression Ratio: 9.7:1
Induction: Carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 58.5 hp / 42.6 kW @ 5200 rpm
Max Torque: 87 Nm / 64 lb-ft @ 3900 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 9.647 9.315 9.004 2nd 6.891 6.653 6.432 3rd 5.125 4.948 4.783 4th 4.248 4.102 3.965 5th 3.643 3.517 3.400
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm discs 2 piston caliper
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: D402F MH90-21 54H
Rear Tyre: D401 150/80B16 71H
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2293.6 mm / 90.3 in
Wheelbase: 1534 / 60.4 in
Seat Height: Laden2 26.6 in / 675.64 mm Unladen 28.5 in / 723.9 mm
Ground Clearance: 110 mm / 4.3 in
Dry Weight: 251 kg / 554 lbs
Wet Weight: 267 kg / 589 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Harley Davidson XL 1200C Sportster Custom (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200C Sportster Custom (2000-01) https://motorcyclespecifications.com/harley-davidson-xl-1200c-sportster-custom-2000-01-specs/ Wed, 05 Apr 2023 08:18:14 +0000 https://motorcyclespecifications.com/?p=45420 The Harley Davidson XL 1200C Sportster Custom was produced between 2000 and 2001. It features a 1199cc V-twin engine with a compression ratio of 9.7:1, producing a maximum power of

The post Harley Davidson XL 1200C Sportster Custom (2000-01) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200C Sportster Custom was produced between 2000 and 2001. It features a 1199cc V-twin engine with a compression ratio of 9.7:1, producing a maximum power of 58.5 hp at 5200 rpm and a maximum torque of 87 Nm at 3900 rpm. The bike has a 5-speed transmission and belt final drive. The mild steel, tubular frame has a swingarm made of mild steel with MIG welded rectangular tube sections. The bike features 39mm front forks and a coil-over, dual-adjustable preload rear suspension, as well as single 292mm disc brakes with 2-piston calipers on the front and a single 292mm disc brake with a 1-piston caliper on the rear. The bike is fitted with D402F MH90-21 54H front tires and D401 150/80B16 71H rear tires. It has a rake of 30 degrees, a trail of 107mm, and a ground clearance of 110mm. The bike has a dry weight of 251kg and a wet weight of 267kg, with a fuel capacity of 17 liters.


Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom

Year: 2000 – 01
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cub in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled,
Compression Ratio: 9.7:1
Induction: Carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 58.5 hp / 42.6 kW @ 5200 rpm
Max Torque: 87 Nm / 64 lb-ft @ 3900 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 9.647 9.315 9.004 2nd 6.891 6.653 6.432 3rd 5.125 4.948 4.783 4th 4.248 4.102 3.965 5th 3.643 3.517 3.400
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm discs 2 piston caliper
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: D402F MH90-21 54H
Rear Tyre: D401 150/80B16 71H
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2293.6 mm / 90.3 in
Wheelbase: 1534 / 60.4 in
Seat Height: 710.0 mm / 28.0 in
Ground Clearance: 110 mm / 4.3 in
Dry Weight: 251 kg / 554 lbs
Wet Weight: 267 kg / 589 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Harley Davidson XL 1200C Sportster Custom (2000-01) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCR Street Rod (2006) https://motorcyclespecifications.com/harley-davidson-vrscr-street-rod-2006-specs/ Wed, 05 Apr 2023 06:23:11 +0000 https://motorcyclespecifications.com/?p=45315 The Harley Davidson VRSCR Street Rod is a motorcycle that was manufactured in 2006. Its engine is a four-stroke, 60-degree V-twin DOHC with a capacity of 1130cc or 59 cubic

The post Harley Davidson VRSCR Street Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCR Street Rod is a motorcycle that was manufactured in 2006. Its engine is a four-stroke, 60-degree V-twin DOHC with a capacity of 1130cc or 59 cubic inches. It has a compression ratio of 11.3:1 and is liquid-cooled. The ignition is a sequential single fire non-waste spark, coil-on-plug, and the battery is sealed and maintenance-free. The motorcycle has a maximum power of 121 horsepower and a maximum torque of 108.3 Nm at 7000 rpm. The clutch is a nine-plate wet pressure-fed system with integral compensation, and the transmission is a five-speed system with a belt final drive. The bike has a steel perimeter upper frame with hydro-formed main rails and bolt-on lower frame rails, as well as a huge 49mm telescopic fork front suspension and a dual coil-over adjustable shock rear suspension. It has front and rear brakes, with the front brakes being two 292mm discs with four-piston calipers, and the rear brake a single 292mm disc with four-piston calipers. The front and rear tires are D207s, with a 120/70ZR-19 and a 180/55ZR-18, respectively. The motorcycle has a 34-degree rake, a 38-degree fork angle, 100mm of trail, and a wheelbase of 1713mm. Its seat height is 762mm when laden and 787mm when unladen, with a ground clearance of 142mm. The dry weight of the bike is 281kg, with a wet weight of 297kg. Its fuel capacity is 18.9 liters, and it has a top speed of 228 km/h and can complete a standing 1/4 mile in 12.5 seconds.


Technical specifications:

Make Model: Harley Davidson VRSCR Street Rod

Year: 2006
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 121 hp / 89 Kw @ 7000 rpm
Max Torque: 108.3 Nm / 80 lb-ft @ 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 (10.969) 2nd 7.898 (7.371) 3rd 6.322 (5.900) 4th 5.459 (5.095) 5th 4.899 (4.563)
Frame: Steel perimeter upper frame w/hydro formed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: Laden2 762 mm / 30 in – Unladen 787 mm / / 31 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 281 kg / 618 lbs
Wet Weight: 297 kg / 655 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal
Standing 1/4 Mile: 12.5 sec
Top Speed: 228 km/h

The post Harley Davidson VRSCR Street Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock (2007) https://motorcyclespecifications.com/harley-davidson-vrscx-screamin-eagle-vance-hines-nhra-pro-stock-2007-specs/ Wed, 05 Apr 2023 02:28:57 +0000 https://motorcyclespecifications.com/?p=45098 The Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock is a limited edition motorcycle released in 2007. It is powered by a liquid-cooled, 1250 cc V-twin engine with

The post Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock (2007) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock is a limited edition motorcycle released in 2007. It is powered by a liquid-cooled, 1250 cc V-twin engine with electronic sequential port fuel injection and a compression ratio of 11.3:1. The engine produces a maximum power of 123 hp and maximum torque of 115 Nm. The clutch is a nine-plate wet pressure fed system and the transmission is a five-speed with a belt final drive. The frame is made of steel with a hydroformed main rail and bolt-on lower frame rails. The front suspension is a 49mm telescopic fork with a dual coil-over adjustable shock rear suspension. The front brakes have two 300mm discs and four-piston calipers, and the rear brake has a single 300mm disc and four-piston caliper. The motorcycle has a rake of 34 degrees, a fork angle of 36 degrees, and a trail of 114 mm. The length is 2363.4mm, the wheelbase is 1699 mm, and the seat height is 660.40 mm when laden and 688.34 mm when unladed. The dry weight is 289 kg and the wet weight is 304 kg. The fuel capacity is 18.9 liters.


Technical specifications:

Make Model: Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock L.E.

Year: 2007
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder.
Capacity: 1250 cc / 76.2 cu-in
Bore x Stroke: 105 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3;1
Lubrication: Gerotor, wet sump
Induction: Electronic Sequential Port Fuel Injection
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 123 hp / 90.5 kW @ 8000 rpm
Max Torque: 115 Nm / 86 [email protected] 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 10.969 10.969 2nd 7.898 7.371 7.371 3rd 6.322 5.900 5.900 4th 5.459 5.095 5.095 5th 4.889 4.563 4.563
Frame: Steel perimeter upper frame w/hydroformed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 300mm discs 4 piston calipers
Rear Brakes: Single 300mm disc 4 piston caliper
Front Tyre: D207F 120/70ZR-19 60W
Rear Tyre: D207F 240/40R18 74W
Rake: 34 degrees
Fork Angle: 36 degrees
Trail: 114 mm / 4.5 in
Dimensions: Length 2363.4mm / 93.0 in
Wheelbase: 1699 mm / 66.9 in
Seat Height: Laden 660.40 mm / 26 in Unladen 688.34 mm / 27.1 in
Dry Weight: 289 kg / 637 lbs
Wet Weight: 304 kg / 670 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal

The post Harley Davidson VRSCX Screamin’ Eagle/Vance & Hines NHRA Pro Stock (2007) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 883R Sportster (2004-05) https://motorcyclespecifications.com/harley-davidson-xl-883r-sportster-2004-05-specs/ Wed, 05 Apr 2023 01:50:02 +0000 https://motorcyclespecifications.com/?p=45061 The Harley Davidson XL 883R Sportster was produced from 2004-05 and has a four-stroke, 45-degree V-twin Evolution engine with 883cc capacity and a compression ratio of 8.9:1. It uses electronic

The post Harley Davidson XL 883R Sportster (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 883R Sportster was produced from 2004-05 and has a four-stroke, 45-degree V-twin Evolution engine with 883cc capacity and a compression ratio of 8.9:1. It uses electronic sequential port fuel injection and has an inductive, battery-powered ignition system. The bike has a 5-speed transmission with a final drive belt and weighs 568 lbs dry or 588 lbs when wet. The fuel capacity is 3.3 US gal, and the bike has a mild steel tubular frame with circular sections, swingarm, and coil-over, dual-adjustable rear suspension. It also features a front suspension with 39mm telescopic forks and front and rear brakes with single 292mm discs. The front tire is 100/90-19 57H, and the rear tire is 150/80B16 71H. The bike has a length of 2288.5 mm, a width of 830.6 mm, and a height of 1137.9 mm. The wheelbase is 1524 mm, the seat height ranges from 713.7-759.5 mm, and the ground clearance is 141 mm.


Technical specifications:

Make Model: Harley Davidson XL 883R Sportster

Year: 2004 – 05
Engine: Four stroke, 45 degrees V-Twin, Evolution (R) Valve Train Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, two valves per cylinder
Capacity: 883 cc / 53.8 cu-in
Bore x Stroke: 76.2 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Lubrication: Dry sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Inductive, battery-powered,V Fire III c electronic breakerless with solid-state dual stage advance
Starting: Electric
Max Torque: 74.6 Nm / 55 lb-ft @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.782 10.782 10.782 2nd 7.702 7.702 7.702 5.728 5.728 5.728 4th 3rd 4.748 4.748 4.748 5th .071 4.071 4.071
Frame: Mild steel tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Telescopic forks
Rear Suspension: Coil-over; preload dual-adjustable
Front Brakes: Single 292mm discs 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston calipers
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29 degrees
Fork Angle: 29.6 degrees
Trail: 117 mm / 4.6 in
Dimensions: Length 2288.5 mm / 90.1 in Width 830.6 mm / 32.7 in Height 1137.9 mm / 44.8 in
Wheelbase: 1524 mm / 60.0 in
Seat Height: Laden2 713.7 mm / 28.1 in Unladen 759.5 mm / 29.9 in
Ground Clearance: 141 mm / 5.6 in
Dry Weight: 258.0 kg / 568 lbs
Wet Weight: 267 kg / 588 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Harley Davidson XL 883R Sportster (2004-05) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 883 Sportster (2000-01) https://motorcyclespecifications.com/harley-davidson-xl-883-sportster-2000-01-specs/ Tue, 04 Apr 2023 13:15:08 +0000 https://motorcyclespecifications.com/?p=44365 The Harley Davidson XL 883 Sportster motorcycle was manufactured from 2000-01 and features a four-stroke, 45-degree V-twin engine with an 883cc capacity and air cooling. The compression ratio is 8.8:1,

The post Harley Davidson XL 883 Sportster (2000-01) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 883 Sportster motorcycle was manufactured from 2000-01 and features a four-stroke, 45-degree V-twin engine with an 883cc capacity and air cooling. The compression ratio is 8.8:1, and the bike uses carburetion with a 40mm constant velocity, an enrichener, and an accelerator pump. The ignition is digital CDI, and it starts with electric. The clutch is a multi-plate clutch with a diaphragm spring in an oil bath, while the five-speed transmission is driven by a belt final drive. The bike has a mild steel, tubular frame with circular sections and cast junctions, and the rear swingarm is mild steel with rectangular tube sections and stamped junctions. The suspension includes 39mm conventional cartridge forks in the front and dual shocks coil-over with dual-adjustable preload in the rear. The front brakes are single 292mm discs with two-piston calipers, while the rear features single 292mm discs with one-piston calipers. The front and rear tires are 100/90-19 and 130/90HB16, respectively, and the rake is 29.6 degrees with a fork angle of 30.1 degrees. The bike’s dimensions are 2237mm in length, with a wheelbase of 1522mm, a seat height of 711.2mm, a ground clearance of 112mm, and a dry weight of 222kg. The fuel capacity is 17 liters or 4.5 US gallons, with a wet weight of 263kg.


Technical specifications:

Make Model: Harley Davidson XL 883 Sportster

Year: 2000 – 01
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 883 cc / 53.9 cub in.
Bore x Stroke: 76.2 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
Induction: Carburetion (40 mm constant velocity with enrichener and accelerator pump) Air Cleaner/Filter Oval racetrack ;
Ignition: Digital CDI
Starting: Electric
Max Torque: 69 Nm 52 lb-ft @ 4300 rpm
Clutch: Multi-plate clutch with diaphragm spring in oil bath
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.944 9.792 9.467 2nd 7.542 6.732 6.663 3rd 5.834 5.220 5.143 4th 4.806 4.301 4.278 5th 4.071 3.643 3.643
Frame: Mild steel, tubular frame; circularsections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Conventional cartridge forks
Rear Suspension: Dual shocks Coil-over; preload dual-adjustable
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston calipers
Front Tyre: 100/90-19
Rear Tyre: 130/90HB16
Rake: 29.6 degrees
Fork Angle: 30.1 degrees
Trail: 117 mm / 4.6 in
Dimensions: Length 2237 mm / 88.3 in
Wheelbase: 1522 mm / 60 in
Seat Height: 711.2 mm / 28 in
Ground Clearance: 112 mm / 4.4 om
Dry Weight: 222 kg / 489.0 lbs
Wet Weight: 263 kg / 579 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL 883 Sportster (2000-01) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCF V-Rod Muscle (2014) https://motorcyclespecifications.com/harley-davidson-vrscf-v-rod-muscle-2014-specs/ Tue, 04 Apr 2023 13:07:12 +0000 https://motorcyclespecifications.com/?p=44358 The Harley Davidson VRSCF V-Rod Muscle (2014) motorcycle has a four-stroke, 60-degree V-twin engine with a capacity of 1247cc/76.1 cu in, and a liquid cooling system. It has a compression

The post Harley Davidson VRSCF V-Rod Muscle (2014) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCF V-Rod Muscle (2014) motorcycle has a four-stroke, 60-degree V-twin engine with a capacity of 1247cc/76.1 cu in, and a liquid cooling system. It has a compression ratio of 11.5:1 and an electronic sequential port fuel injection induction. It has an electric starting system and can generate a maximum power of 91 kW/122 hp at 8250 rpm, and max torque of 115 Nm/11.7 kgf-m/85 ft/lbs at 6500 rpm. The transmission system is a 5-speed with a final drive of a belt and a primary drive of gear 64/117 ratio. The motorcycle also has a steel perimeter upper frame with hydroformed main rails and bolt-on lower frame rails, MIG-welded swingarm, and polished, one-piece cast-aluminum rear suspension. It has a lean angle of 32o both left and right sides, and front forks of 43mm. The motorcycle also features dual 300mm discs and 4-piston calipers in the front brakes, a single 300mm disc and 4-piston caliper rear brake, and black 5-spoke cast-aluminum wheels in both front and rear.


Technical specifications:

Make Model: Harley Davidson VRSCF V-Rod Muscle

Year: 2014
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder, Revolution.
Capacity: 1247 cc / 76.1 cu in
Bore x Stroke: 105 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Exhaust: Satin chrome, dual side exhaust system with black end caps
Induction: Electronic Sequential Port Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 91 kW / 122 hp @ 8250 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 85 ft/lbs @ 6500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Gear, 64/117 ratio
Gear Ratio: 1st 110.969 / 2nd 7.371 / 3rd 5.900 / 4th 5.095 / 5th 4.563:1
Frame: Steel perimeter upper frame with hydroformed main rails and bolt-on lower frame rails; MIG welded Swingarm Polished, one-piece cast aluminum
Lean Angle, Left: 32o
Lean Angle, Right: 32o
Front Suspension: Huge 43 mm forks
Rear Suspension: Twin coil over adjustable shock
Front Brakes: 2 x 300mm discs, 4 piston calipers
Rear Brakes: Single 300 mm disc, 4 piston caliper
Wheels, Front and Rear: Black, 5-spoke, cast aluminum

The post Harley Davidson VRSCF V-Rod Muscle (2014) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XLT 1000 Touring Sportster “Baby Dresser”. (1977 ) https://motorcyclespecifications.com/harley-davidson-xlt-1000-touring-sportster-baby-dresser-1977-specs/ Tue, 04 Apr 2023 06:25:05 +0000 https://motorcyclespecifications.com/?p=43986 The Harley Davidson XLT 1000 Touring Sportster, also known as the “Baby Dresser,” was produced in 1977 with only 1,099 units made. It features a four-stroke, 45-degree V-twin engine with

The post Harley Davidson XLT 1000 Touring Sportster “Baby Dresser”. (1977 ) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XLT 1000 Touring Sportster, also known as the “Baby Dresser,” was produced in 1977 with only 1,099 units made. It features a four-stroke, 45-degree V-twin engine with a capacity of 998cc and 2 valves per cylinder. The bike has a 38mm Keihin carburetor induction system and is ignition is transistorized, starting with an electric mechanism. Its power can reach 57 hp or 41.7 kW at 6000 rpm, and its torque can go up to 55 ft-lb or 74 Nm at 4000 rpm. The motorcycle has a 4-speed transmission with a final drive chain gear ratio of 1st: 10.63; 2nd: 7.70;rd: 5.87; 4th: 4.22. The front suspension is telehydraulic forks, while the rear suspension has dual shocks swinging arm fork. The front brakes consist of two 292mm discs, with the rear brake being a 200mm drum. The castor has a degree of 61, and the trail is at 114 mm or 4.5 in. The bike itself is 2217 mm or 87.3 in long, while its wheelbase is at 1486 mm or 58.5 in. The motorcycle has a wet weight of 262 kg or 578 lbs and a fuel capacity of 13.5 liters or 3.5 gallons with an oil capacity of 5.8 pints.


Technical specifications:

Make Model: Harley Davidson XLT 1000 Touring Sportster “Baby Dresser”.

Year: 1977
Production: 1099 Units
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder
Capacity: 998 cc / 60.8 cu-in
Bore x Stroke: 81 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 8.8;1
Induction: 38mm Keihin carburetor
Ignition: Transistorized
Starting: Electric
Max Power: 57 hp / 41.7 kW @ 6000 rpm
Max Torque: 55 ft-lb / 74 Nm @ 4000 rpm
Transmission: 4 Speed
Final Drive: Chain
Gear Ratio: 1st: 10.63; 2nd: 7.70;rd: 5.87; 4th: 4.22
Front Suspension: Telehydraulic forks
Rear Suspension: Dual shocks swinging arm fork
Front Brakes: 2x 292mm discs
Rear Brakes: 200mm Drum
Front Tyre: 3.75-19
Rear Tyre: 4.25-18
Castor: 61 degrees
Trail:: 114 mm / 4.5 in
Dimensions: Length 2217 mm / 87.3 in
Wheelbase: 1486 mm / 58.5 in
Oil Capacity: 5.8 pints
Wet Weight: 262 kg / 578 lbs
Fuel Capacity: 13.5 Litres / 3.5 gal

The post Harley Davidson XLT 1000 Touring Sportster “Baby Dresser”. (1977 ) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200C Sportster Custom (1998-99) https://motorcyclespecifications.com/harley-davidson-xl-1200c-sportster-custom-1998-99-specs/ Mon, 03 Apr 2023 23:59:01 +0000 https://motorcyclespecifications.com/?p=43630 The Harley Davidson XL 1200C Sportster Custom is a motorcycle that was produced from 1998 to 1999. It has a four stroke, 45 degrees V-twin, OHV engine with 2 valves

The post Harley Davidson XL 1200C Sportster Custom (1998-99) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200C Sportster Custom is a motorcycle that was produced from 1998 to 1999. It has a four stroke, 45 degrees V-twin, OHV engine with 2 valves per cylinder and a capacity of 1199cc. The compression ratio is 9.7:1 and it has a carburetor induction system with digital CDI ignition. The bike has a maximum power of 58.5 hp at 5200 rpm and a maximum torque of 87 Nm at 3900 rpm. It has a 5-speed transmission and a final drive belt. The frame is made of mild steel, tubular frame with circular sections and has a swingarm made of mild steel with rectangular tube sections. The front suspension is 39mm forks and the rear suspension is a coil-over, dual-adjustable preload. The front brakes are single 292mm discs with a 2 piston caliper and the rear brake is a single 292mm disc with a 1 piston caliper. The front tire is D402F MH90-21 54H and the rear tire is D401 150/80B16 71H. The rake is 30 degrees and the trail is 107 mm / 4.2 in. The bike has a length of 2293.6 mm / 90.3 in, a wheelbase of 1534 / 60.4 in, and a seat height of 710.0 mm / 28.0 in. It has a ground clearance of 110 mm / 4.3 in, a dry weight of 251 kg / 554 lbs, and a wet weight of 267 kg / 589 lbs. The fuel capacity is 17 Litres / 4.5 gal.


Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom

Year: 1998 – 99
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cub in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled,
Compression Ratio: 9.7:1
Induction: Carburetor
Ignition: Digital CDI
Starting: Electric
Max Power: 58.5 hp / 42.6 kW @ 5200 rpm
Max Torque: 87 Nm / @ 3900 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 9.647 9.315 9.004 2nd 6.891 6.653 6.432 3rd 5.125 4.948 4.783 4th 4.248 4.102 3.965 5th 3.643 3.517 3.400
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm discs 2 piston caliper
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: D402F MH90-21 54H
Rear Tyre: D401 150/80B16 71H
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2293.6 mm / 90.3 in
Wheelbase: 1534 / 60.4 in
Seat Height: 710.0 mm / 28.0 in
Ground Clearance: 110 mm / 4.3 in
Dry Weight: 251 kg / 554 lbs
Wet Weight: 267 kg / 589 lbs
Fuel Capacity: 17 Litres / 4.5 gal

The post Harley Davidson XL 1200C Sportster Custom (1998-99) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 1200L Sportster Low (2008-09) https://motorcyclespecifications.com/harley-davidson-xl-1200l-sportster-low-2008-09-specs/ Mon, 03 Apr 2023 18:05:08 +0000 https://motorcyclespecifications.com/?p=43303 The Harley Davidson XL 1200L Sportster Low is a motorcycle model that was produced in 2008-09. It has a 1199cc four-stroke, 45 degrees V-twin Evolution engine with pushrod-operated, OHV, 2

The post Harley Davidson XL 1200L Sportster Low (2008-09) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200L Sportster Low is a motorcycle model that was produced in 2008-09. It has a 1199cc four-stroke, 45 degrees V-twin Evolution engine with pushrod-operated, OHV, 2 valves per cylinder. The bike is air-cooled and has a dry-sump lubrication system with an electronic sequential port fuel injection (ESPFI) induction system. The compression ratio is 9.7:1, and the bike has a maximum torque of 107.3 Nm at 4000 rpm. The clutch is wet, and the transmission is a 5-speed with a final drive belt. The bike has a mild steel, tubular frame, circular sections, cast junctions and a coil-over, dual-adjustable preload shock rear suspension. The front brakes consist of a single 292mm disc with two-piston calipers, while the rear brakes feature a single 260mm disc with a one-piston caliper. The front tire is 100/90-19 57H, and the rear is 150/80B16 71H. The bike has a rake of 29.6 degrees and a trail of 120mm/4.7in. Its dimensions come in at 2263.1mm/89.1in in length, 894.1mm/35.2in in width, and 1188.7mm/46.8 in in height, with a wheelbase of 1516mm/59.7in. The seat height is 668mm/26.30in in the Laden position and 711.2mm/28.0in in the Unladen position, with a ground clearance of 112mm/4.1in. The bike’s gross vehicle weight rating is 453.60kg/1000lbs, with a dry weight of 257kg/557lbs and a wet weight of 263.5kg/581lbs. The fuel capacity is 17 liters/4.5 US gal.


Technical specifications:

Make Model: Harley Davidson XL 1200L Sportster Low

Year: 2008 – 09
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame, circular sections, cast junctions
Rear Suspension: Coil-over, dual-adjustable preload chocs
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29.6 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2263.1 mm / 89.1 in Width 894.1 mm / 35.2 in Height 1188.7 mm / 46.8 in
Wheelbase: 1516 mm / 59.7 in
Seat Height: Laden 668. mm / 26.30 in. Unladen 711.2 mm / 28.0 in.
Ground Clearance: 112 mm / 4.1 in
Gross Vehicle Weight Rating: 453.60 kg / 1000 lbs
Dry Weight: 257 kg / 557 lbs
Wet Weight: 263.5 kg / 581 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL 1200L Sportster Low (2008-09) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCA V-Rod 100th Anniversary Edition (2003) https://motorcyclespecifications.com/harley-davidson-vrsca-v-rod-100th-anniversary-edition-2003-specs/ Mon, 03 Apr 2023 10:42:03 +0000 https://motorcyclespecifications.com/?p=42888 The Harley Davidson VRSCA V-Rod 100th Anniversary Edition motorcycle was released in 2003 with a four-stroke, 60-degree V-twin engine. It has a capacity of 1130 cc and a liquid-cooled cooling

The post Harley Davidson VRSCA V-Rod 100th Anniversary Edition (2003) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCA V-Rod 100th Anniversary Edition motorcycle was released in 2003 with a four-stroke, 60-degree V-twin engine. It has a capacity of 1130 cc and a liquid-cooled cooling system. The compression ratio is 11.3:1, and the lubrication system is Gerotor, wet sump. The ignition is sequential, single fire non-waste spark with coil on plug, and the bike is powered by a sealed, maintenance-free battery. The bike has a five-speed transmission with a belt final drive and a steel perimeter upper frame. The suspension system consists of a huge 49mm telescopic fork and a dual coil over adjustable shock. The front and rear brakes consist of two 292mm discs with four-piston calipers and a single 292mm disc with a four-piston caliper, respectively. The bike has a length of 2375.6 mm and a wheelbase of 1713 mm. Its dry weight is 270.4 kg, and the fuel capacity is 15 litres. The bike has a top speed of 218.6 km/h and can achieve an average consumption of 17.0km/lit.


Technical specifications:

Make Model: Harley Davidson VRSCA V-Rod 100th Anniversary Edition

Year: 2003
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 115 hp / 84 kW @ 8250 rpm
Max Torque: 100.3 Nm / 74 lb-ft @ 7300 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 2.5:1 (45/18) 2nd 1.68:1 (42/25) 3rd 1.345:1 (39/29) 4th 1.161:1 (36/31) 5th 1.04:1 (26/25)
Frame: Steel perimeter upper frame w/ hydroformed main rails and bolt-on lower frame rails Swing Arm One piece cast aluminum polished
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 659.9 mm / 26.0 in – 687.8 mm / 27.1 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 270.4 kg / 595 lbs
Wet Weight: 280 kg / 615.5 lbs
Fuel Capacity: 15 Litres / 4.0 US gal
Consumption Average: 17.0 km/lit
Standing 1/4 Mile: 11.7 sec
Top Speed: 218.6 km/h

The post Harley Davidson VRSCA V-Rod 100th Anniversary Edition (2003) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson Ultra Limited (2018) https://motorcyclespecifications.com/harley-davidson-ultra-limited-2018-specs/ Mon, 03 Apr 2023 06:53:56 +0000 https://motorcyclespecifications.com/?p=42680 The Harley Davidson Ultra Limited motorcycle has a four-stroke, V-twin engine with a capacity of 1746 cc, chrome 2-1-2 dual exhaust with tapered mufflers, and electronic sequential port fuel injection.

The post Harley Davidson Ultra Limited (2018) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson Ultra Limited motorcycle has a four-stroke, V-twin engine with a capacity of 1746 cc, chrome 2-1-2 dual exhaust with tapered mufflers, and electronic sequential port fuel injection. The engine is air-cooled and has hydraulic, self-adjusting lifters with 4 valves per cylinder. The motorcycle has a mild steel frame with telescopic front suspension, swingarm rear suspension, air-adjustable rear shocks, and 2x300mm front disc brakes with 4 piston caliper ABS. The motorcycle’s front and rear wheels are contrast chrome impeller cast aluminum and the front and rear tires are 130/80B17 65H and 180/65B16 81H, respectively. The motorcycle’s dimensions are 2600mm in length, 1625mm wheelbase, and 740mm unladen seat height. The motorcycle has a dry weight of 398 kg and a wet weight of 413 kg with a fuel capacity of 22.7 liters.


Technical specifications:

Make Model: Harley Davidson FLHTK Electra Glide Ultra Limited 115th Anniversary

Year: 2018
Engine: Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1746 cc / 107 cub in
Bore x Stroke: 100 x 111 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Exhaust: Chrome, 2-1-2 dual exhaust with tapered mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication: Pressurized, dry-sump with oil cooler
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 154 Nm / 113.6 lb-ft @ 3250 rpm
Clutch: Multi-plate, wet
Transmission: 6 Speed
Primary Drive: Chain, 34/46 ratio
Final Drive: Belt
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4.0 5th 3.407 6th 2.875
Frame: Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Swingarm Mild steel, two-piece drawn and welded section, forged junctions, MIG welded, Rear Shocks Air-adjustable
Front Brakes: 2 x 300mm discs, 4 piston caliper ABS
Rear Brakes: Single 300 mm disc, 4 piston caliper ABS
Wheels Front: Contrast Chrome Impeller Cast Aluminum
Wheels Rear: Contrast Chrome Impeller Cast Aluminum
Front Tyre: 130/80B17 65H
Rear Tyre: 180/65B16 81H
Rake: 26 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2600 mm / 101.8 in
Wheelbase: 1625 mm / 64 in
Seat Height: Unladen 740 mm / 29.1 in Laden 698 mm / 27.5 in
Ground Clearance: 116.8 mm / 4.6 in
Dry Weight: 398 kg / 877 lbs
Wet Weight: 413 kg / 910 lbs
Fuel Capacity: 22.7 Litres / 6 US gal

The post Harley Davidson Ultra Limited (2018) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCR Street Rod (2007) https://motorcyclespecifications.com/harley-davidson-vrscr-street-rod-2007-specs/ Sun, 02 Apr 2023 20:43:03 +0000 https://motorcyclespecifications.com/?p=42122 The Harley Davidson VRSCR Street Rod is a motorcycle with a four stroke, 60-degree V-twin engine with a capacity of 1130cc/59 cubic inches. It has a liquid cooling system and

The post Harley Davidson VRSCR Street Rod (2007) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCR Street Rod is a motorcycle with a four stroke, 60-degree V-twin engine with a capacity of 1130cc/59 cubic inches. It has a liquid cooling system and a compression ratio of 11.3:1. The bike also has sequential port electronic fuel injection with 53mm throttle bodies and a sequential, single fire non-waste spark, coil on plug ignition. The maximum power of the motorcycle is 121hp/89 kW at 7000rpm, and the maximum torque is 108.3 Nm/80 lb-ft at 7000rpm. The transmission is a 5-speed, and the final drive is a belt. The frame is made of steel perimeter upper frame with hydro-formed main rails and bolt-on lower frame rails that are MIG welded. The front suspension consists of huge 49mm telescopic forks, and the rear suspension is a dual coil-over adjustable shock. The front brakes are two 292mm discs with 4-piston calipers, while the rear brakes are a single 292mm disc with a 4-piston caliper. The bike also has a standing quarter-mile speed of 12.5 seconds and a top speed of 228km/h. Its dimensions are 2375.6mm/93.6in in length, a wheelbase of 1713mm/67.5in, and a seat height of 762mm/30in when loaded and 787mm/31in when unloaded. The bike has a ground clearance of 142mm/5.6in, a dry weight of 281kg/618lbs, and a wet weight of 297kg/655lbs with a fuel capacity of 18.9L/5.0US gallons.


Technical specifications:

Make Model: Harley Davidson VRSCR Street Rod

Year: 2007
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 121 hp / 89 Kw @ 7000 rpm
Max Torque: 108.3 Nm / 80 lb-ft @ 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 (10.969) 2nd 7.898 (7.371) 3rd 6.322 (5.900) 4th 5.459 (5.095) 5th 4.899 (4.563)
Frame: Steel perimeter upper frame w/hydro formed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: Laden2 762 mm / 30 in – Unladen 787 mm / / 31 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 281 kg / 618 lbs
Wet Weight: 297 kg / 655 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal
Standing 1/4 Mile: 12.5 sec
Top Speed: 228 km/h

The post Harley Davidson VRSCR Street Rod (2007) appeared first on MotorcycleSpecifications.com.

]]>
Aermacchi / Harley Davidson SXT 250 (1975) https://motorcyclespecifications.com/aermacchi-harley-davidson-sxt-250-1975-specs/ Sun, 02 Apr 2023 17:15:03 +0000 https://motorcyclespecifications.com/?p=41926 The Aermacchi/Harley Davidson SXT 250 motorcycle was produced in 1975 and had a two-stroke, single-cylinder engine with a capacity of 242.6cc. It had a compression ratio of 10.3:1 and used

The post Aermacchi / Harley Davidson SXT 250 (1975) appeared first on MotorcycleSpecifications.com.

]]>
The Aermacchi/Harley Davidson SXT 250 motorcycle was produced in 1975 and had a two-stroke, single-cylinder engine with a capacity of 242.6cc. It had a compression ratio of 10.3:1 and used a 32mm Dell’Orto carburetor for induction. The maximum power output was 20hp at 7000rpm and it had a 5-speed transmission with a chain final drive. The front suspension used an oil-damper Ceriant telescopic fork and the rear suspension was a pivoted fork with Betor dampers and 3-way adjustment. The front brake was a single disc and the rear brake was a drum. The motorcycle had a wet weight of 129kg and a fuel capacity of 10.5 litres or 2.7 US gallons.


Technical specifications:

Make Model: Aermacchi / Harley Davidson SXT 250

Year: 1975
Engine: Two stroke, single cylinder
Capacity: 242.6 cc / 14.8 cu-in
Bore x Stroke: 72 x 59.6 mm
Cooling System: Air cooled
Compression Ratio: 10.3:1
Induction: 1x 32mm Dell’Orto carburetor
Starting: kick
Max Power: 20 hp / 14.6 Kw @ 7000 rpm
Max Torque:
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Oil damper Ceriant telescopic fork
Rear Suspension: Pivoted fork and Betor dampers 3-way adjustment
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 3.00 -21
Rear Tyre: 4.00 -18
Wet Weight: 129 kg / 294.4 lbs
Fuel Capacity: 10.5 Litres / 2.7 US gal

The post Aermacchi / Harley Davidson SXT 250 (1975) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCD Night Rod (2006) https://motorcyclespecifications.com/harley-davidson-vrscd-night-rod-2006-specs/ Sun, 02 Apr 2023 09:17:58 +0000 https://motorcyclespecifications.com/?p=41489 The Harley Davidson VRSCD Night Rod is a motorcycle that was manufactured in 2006. It is equipped with a four-stroke, 60-degree V-twin, DOHC engine that has a capacity of 1130cc.

The post Harley Davidson VRSCD Night Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCD Night Rod is a motorcycle that was manufactured in 2006. It is equipped with a four-stroke, 60-degree V-twin, DOHC engine that has a capacity of 1130cc. The engine is liquid-cooled and has a compression ratio of 11.3:1. It is also equipped with sequential port electronic fuel injection with 53mm throttle bodies and a sequential, single fire non-waste spark ignition system. The bike has a maximum power output of 121 horsepower and a maximum torque of 108.3 Nm at 7000 RPM. The transmission is a 5-speed belt-driven system. The bike features a steel perimeter upper frame with hydro-formed main rails and bolt-on lower frame rails that have been MIG welded. The bike has a front suspensions system of 49mm telescopic forks, while the rear suspension is equipped with dual coil-over adjustable shock. The front brakes are equipped with two 292mm discs and four piston calipers, while the rear brakes feature a single 292mm disc and four-piston caliper. The bike has a length of 2375.6 mm, a wheelbase of 1713 mm, a seat height of 660 mm, and a dry weight of 275.0 kg. The fuel capacity is 14 liters.


Technical specifications:

Make Model: Harley Davidson VRSCD Night Rod

Year: 2006
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 121 hp / 89 Kw @ 7000 rpm
Max Torque: 108.3 Nm / 80 lb-ft @ 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 (10.969) 2nd 7.898 (7.371) 3rd 6.322 (5.900) 4th 5.459 (5.095) 5th 4.899 (4.563)
Frame: Steel perimeter upper frame w/hydro formed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 660 mm / 26.0 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 275.0 kg / 606.3 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Harley Davidson VRSCD Night Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XLCH 1000 Sportster (1976-77) https://motorcyclespecifications.com/harley-davidson-xlch-1000-sportster-1976-77-specs/ Sun, 02 Apr 2023 08:22:01 +0000 https://motorcyclespecifications.com/?p=41436 The Harley Davidson XLCH 1000 Sportster is a motorcycle model from 1976-77 that features a four stroke, 45 degrees V-Twin, OHV engine with a capacity of 997 cc. Its cooling

The post Harley Davidson XLCH 1000 Sportster (1976-77) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XLCH 1000 Sportster is a motorcycle model from 1976-77 that features a four stroke, 45 degrees V-Twin, OHV engine with a capacity of 997 cc. Its cooling system is air cooled, and it has a compression ratio of 9.0:1. The motorcycle has a maximum power of 57 hp at 6200 rpm and max torque of 60 lb ft at 3500 rpm, with both electric and kick starting options. The XLCH 1000 Sportster model has a four-speed transmission and chain final drive. The steel, double cradle frame has telescopic forks with 175mm wheel travel and a swing arm rear suspension with 100mm wheel travel. The front and rear brakes are single 292mm disc and single 203mm drum, respectively. The front and rear tires are 90/90-R19 and 100 90-R18, respectively, and the motorcycle has a dry weight of 244kg/537lbs. Its top speed is 9 litres/2.3 US gal.


Technical specifications:

Make Model: Harley Davidson XLCH 1000 Sportster

Year: 1976 – 77
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 997 cc / 60.8 cu-in
Bore x Stroke: 81 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Lubrication: Dry sump
Induction: 38mm Keihin carburetor
Ignition: Electronic
Starting: Kick & Electric optional
Max Power: 57 hp / 41.6 kW @ 6200 rpm
Max Torque: 60 lb ft / 81 Nm @ 3500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 4 Speed
Final Drive: Chain
Frame: Steel, Double cradle frame
Front Suspension: Telescopic forks, 175mm wheel travel
Rear Suspension: Swing arm, 100mm wheel travel
Front Brakes: Single 292mm disc
Rear Brakes: Single 203mm Drum
Front Tyre: 90/ 90-R19
Rear Tyre: 100 90-R18
Dry Weight: 244 kg / 537 lbs
Top Speed: 9 Litres / 2.3 US gal

The post Harley Davidson XLCH 1000 Sportster (1976-77) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200C Sportster Custom (2009-10) https://motorcyclespecifications.com/harley-davidson-xl1200c-sportster-custom-2009-10-specs/ Sun, 02 Apr 2023 06:01:07 +0000 https://motorcyclespecifications.com/?p=41306 The Harley Davidson XL 1200C Sportster Custom was produced between 2009 to 2010. It comes with a 1199cc V-twin engine, electronic sequential port fuel injection, and digital CDI ignition. The

The post Harley Davidson XL1200C Sportster Custom (2009-10) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200C Sportster Custom was produced between 2009 to 2010. It comes with a 1199cc V-twin engine, electronic sequential port fuel injection, and digital CDI ignition. The max torque is 79 ft/lbs at 3500 rpm. The motorcycle has a 5-speed transmission and a final drive belt. The frame is made of mild steel and has a tubular design, while the swingarm is made of mild steel with rectangular tube sections. The front suspension is a 39mm fork with 144mm of wheel travel, and the rear suspension is coil-over with preload dual-adjustable settings and 54mm of wheel travel. The front and rear brakes both have a single 300mm disc with 2 38mm piston calipers. The wheels are chrome, 5-spoke cast aluminum, with a front tire size of MH90-21 54H and a rear tire size of 150/80B16 71H. The rake is 30 degrees, the trail is 107mm, the length is 2225mm, and the wheelbase is 1520mm. The seat height ranges from 26.6 inches when laden to 28.5 inches when unladen, and there is a ground clearance of 110mm. The wet weight of the motorcycle is 264kg, and the fuel capacity is 17 liters.


Technical specifications:

Make Model: Harley Davidson XL 1200C Sportster Custom

Year: 2009 – 10
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cub in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled,
Compression Ratio: 9.7:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 79 ft/lbs./ 107 Nm @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Fork,
Front Wheel Travel: 144 mm / 5.6 in
Rear Suspension: Coil-over; preload dual-adjustable,
Rear Wheel Travel: 54 mm / 2.1 in
Front Brakes: Single 300mm discs 2 38mm piston caliper
Rear Brakes: Single 300mm discs 2 38mm piston caliper
Front Wheel: Chrome, 5-Spoke Cast Aluminum
Rear Wheel: Chrome, 5-Spoke Cast Aluminum
Front Tyre: D402F MH90-21 54H
Rear Tyre: D401 150/80B16 71H
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2225 mm / 87.6 in
Wheelbase: 1520 / 59.8 in
Seat Height: Laden2 26.6 in / 675.64 mm Unladen 28.5 in / 723.9 mm
Ground Clearance: 110 mm / 4.3 in
Wet Weight: 264 kg / 582 lbs
Oil Capacity (w/filter): 2.6 Litres
Fuel Capacity: 17 Litres / 4.5 US gal

The post Harley Davidson XL1200C Sportster Custom (2009-10) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCSE2 Screamin Eagle V-Rod (2006) https://motorcyclespecifications.com/harley-davidson-vrscse2-screamin-eagle-v-rod-2006-specs/ Sat, 01 Apr 2023 21:03:03 +0000 https://motorcyclespecifications.com/?p=40808 The Harley Davidson VRSCSE2 Screamin Eagle V-Rod motorcycle was released in 2006 and is powered by a liquid-cooled four-stroke, 1250 cc V-twin engine with 4 valves per cylinder. It has

The post Harley Davidson VRSCSE2 Screamin Eagle V-Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCSE2 Screamin Eagle V-Rod motorcycle was released in 2006 and is powered by a liquid-cooled four-stroke, 1250 cc V-twin engine with 4 valves per cylinder. It has a compression ratio of 11.3:1 and features electronic sequential port fuel injection for induction. The bike has a nine-plate wet pressure-fed clutch with integral compensation and a 5-speed transmission. The belt final drive allows for smooth power delivery. The front suspension has huge 49mm telescopic forks while the rear suspension has a dual coil over adjustable shock. The front brakes are dual 300mm discs with 4-piston calipers, and the rear brake is a single 300mm disc with a 4-piston caliper. The front and rear tires are D207F, with sizes 120/70ZR-19 60W and 240/40R18 74W respectively. The bike has a steel perimeter upper frame with hydroformed main rails, bolt-on lower frame rails, and MIG welding. It has a rake of 34 degrees, a fork angle of 36 degrees, and a trail of 114mm. The bike weighs 308 kg (679 lbs) when wet, and has a fuel capacity of 14 liters (3.7 US gal). Overall, the Harley Davidson VRSCSE2 Screamin Eagle V-Rod offers a powerful and smooth riding experience with impressive design and features.


Technical specifications:

Make Model: Harley Davidson VRSCSE2 Screamin Eagle V-Rod

Year: 2006
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder.
Capacity: 1250 cc / 76.2 cu-in
Bore x Stroke: 105 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3;1
Lubrication: Gerotor, wet sump
Induction: Electronic Sequential Port Fuel Injection
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 123 hp / 90.5 kW @ 8000 rpm
Max Torque: 115 Nm / 86 [email protected] 7000 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 11.752 10.969 10.969 2nd 7.898 7.371 7.371 3rd 6.322 5.900 5.900 4th 5.459 5.095 5.095 5th 4.889 4.563 4.563
Frame: Steel perimeter upper frame w/hydroformed main rails and bolt-on lower frame rails, MIG welded
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 300mm discs 4 piston calipers
Rear Brakes: Single 300mm disc 4 piston caliper
Front Tyre: D207F 120/70ZR-19 60W
Rear Tyre: D207F 240/40R18 74W
Rake: 34 degrees
Fork Angle: 36 degrees
Trail: 114 mm / 4.5 in
Dimensions: Length 2363.4mm / 93.0 in
Wheelbase: 1699 mm / 66.9 in
Seat Height: Laden 660.40 mm / 26 in Unladen 688.34 mm / 27.1 in
Dry Weight: 298 kg / 657 lbs
Wet Weight: 308 kg / 679 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Harley Davidson VRSCSE2 Screamin Eagle V-Rod (2006) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson VRSCA V-Rod (2002-03) https://motorcyclespecifications.com/harley-davidson-vrsca-v-rod-2002-03-specs/ Sat, 01 Apr 2023 09:15:07 +0000 https://motorcyclespecifications.com/?p=40150 The Harley Davidson VRSCA V-Rod was produced between 2002 and 2003. It features a liquid-cooled four-stroke 1130 cc V-twin engine with a capacity of 59 cu-in, 4 valves per cylinder,

The post Harley Davidson VRSCA V-Rod (2002-03) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson VRSCA V-Rod was produced between 2002 and 2003. It features a liquid-cooled four-stroke 1130 cc V-twin engine with a capacity of 59 cu-in, 4 valves per cylinder, and sequential port electronic fuel injection. The bike has a maximum power of 115 hp at 8250 rpm and a maximum torque of 100.3 Nm at 7300 rpm. It has a nine-plate wet pressure-fed clutch with integral compensation and a 5-speed transmission. The final drive is a belt. The frame is made of steel perimeter with hydroformed main rails and bolt-on lower frame rails. The swingarm is one-piece cast aluminum polished. The front suspension features 49mm telescopic forks with 100mm of travel, while the rear suspension has dual coil-over adjustable shock absorbers with 70mm of travel. The front brakes consist of dual 292mm discs with 4-piston calipers, and the rear brake has a single 292mm disc with a 4-piston caliper. The bike has D207 tires, 120/70ZR-19 in the front and 180/55ZR-18 in the rear, and a fuel capacity of 15 liters. It has a dry weight of 270.4 kg and a wet weight of 280 kg. The Harley Davidson VRSCA V-Rod can go from 0 to 60 mph in 3.59 seconds and complete the standing ¼ mile in 11.7 seconds, with a top speed of 218.6 km/h.


Technical specifications:

Make Model: Harley Davidson VRSCA V-Rod

Year: 2002 – 03
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder
Capacity: 1130 cc / 59 cu-in
Bore x Stroke: 100 x 72 mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Lubrication: Gerotor, wet sump
Induction: Sequential Port Electronic fuel injection with 53mm throttle bodies
Ignition: Sequential, single fire non waste spark, coil on plug
Battery: Sealed,maintenance-free, 12-volt, 12 amp-hour, 200 cca (per Battery Council International rating)
Starting: Electric
Max Power: 115 hp / 84 kW @ 8250 rpm
Max Torque: 100.3 Nm / 74 lb-ft @ 7300 rpm
Clutch: Nine plate wet pressure fed with integral compensation
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 2.5:1 (45/18) 2nd 1.68:1 (42/25) 3rd 1.345:1 (39/29) 4th 1.161:1 (36/31) 5th 1.04:1 (26/25)
Frame: Steel perimeter upper frame w/ hydroformed main rails and bolt-on lower frame rails Swing Arm One piece cast aluminum polished
Front Suspension: Huge 49mm telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual coil over adjustable shock
Rear Wheel Travel: 70 mm / 2.7 in
Front Brakes: 2x 292mm discs 4 piston calipers
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: D207 120/70ZR-19
Rear Tyre: D207 180/55ZR-18
Rake: 34 degrees
Fork Angle: 38 degrees
Trail: 100 mm / 3.9 in
Dimensions: Length 2375.6 mm / 93.6 in
Wheelbase: 1713 mm / 67.5 in
Seat Height: 659.9 mm / 26.0 in – 687.8 mm / 27.1 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 270.4 kg / 595 lbs
Wet Weight: 280 kg / 615.5 lbs
Fuel Capacity: 15 Litres / 4.0 US gal
Consumption Average: 17.0 km/lit
Standing 1/4 Mile: 11.7 sec
Top Speed: 218.6 km/h

The post Harley Davidson VRSCA V-Rod (2002-03) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XR1000 (1984) https://motorcyclespecifications.com/harley-davidson-xr1000-1984-specs/ Fri, 31 Mar 2023 11:14:58 +0000 https://motorcyclespecifications.com/?p=38940 The Harley Davidson XR1000 motorcycle was introduced in 1984 with a four stroke, 45 degree V-Twin, OHV engine that had a capacity of 998cc. The bike had a compression ratio

The post Harley Davidson XR1000 (1984) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XR1000 motorcycle was introduced in 1984 with a four stroke, 45 degree V-Twin, OHV engine that had a capacity of 998cc. The bike had a compression ratio of 9.0:1, was air cooled and featured 2 valves per cylinder. It ran on a 2x 36mm Dell’Orto carburetor and had electronic ignition with electric starting. The maximum power of the bike was 70 hp at 5600 rpm and the maximum torque was 48 lb-ft at 4400 rpm. The transmission was a 4 speed with final drive on a chain. The bike had a front telescopic fork suspension with a wheel travel of 175mm and a rear dual shocks, swing arm suspension with a wheel travel of 100mm. The front brakes were 2x 292mm discs and the rear brake was a single 292mm disc. The front and rear tires were 100/90 V19 and 130/90 V16 respectively. The Harly Davidson XR1000 weighed 228 kg dry and 231.0 kg wet. Its fuel capacity was 9.5 liters and it could travel 46 miles per gallon. The bike’s standing 1/4 mile was 12.8 seconds with a top speed of 115 mph. Overall, this was a powerful bike with impressive features and performance.


Technical specifications:

Make Model: Harley Davidson XR 1000

Year: 1984
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder
Capacity: 998 cc / 60.8 cu-in
Bore x Stroke: 81 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.0;1
Induction: 2X 36mm Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 70 hp / 52.6 kW @ 5600 rpm
Max Torque: 48 lb-ft / 65 Nm @ 4400 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Front Wheel Travel: 175 mm / 6.8 in
Rear Suspension: Dual shocks, Swing arm
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2X 292mm discs
Rear Brakes: Single 292mm disc
Front Tyre: 100/90 V19
Rear Tyre: 130/90 V16
Dry Weight: 228 kg / 502.6 lbs
Wet Weight: 231.0 kg / 509.3 lbs
Fuel Capacity: 9.5 Litres / 2.5 US gal
Consumption Average: 46 mpg
Standing 1/4 Mile: 12.8 sec / 101 mph
Top Speed: 115 mph

The post Harley Davidson XR1000 (1984) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 883L Sportster SuperLow (2013) https://motorcyclespecifications.com/harley-davidson-xl-883l-sportster-superlow-2013-specs/ Fri, 31 Mar 2023 05:48:01 +0000 https://motorcyclespecifications.com/?p=38635 The Harley Davidson XL 883L Sportster SuperLow is a motorcycle with a four-stroke, 45-degree V-twin, OHV engine with a capacity of 883cc or 53.9 cubic inches. The bike has an

The post Harley Davidson XL 883L Sportster SuperLow (2013) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 883L Sportster SuperLow is a motorcycle with a four-stroke, 45-degree V-twin, OHV engine with a capacity of 883cc or 53.9 cubic inches. The bike has an air-cooled cooling system and a compression ratio of 8.8:1. The chrome staggered shorty exhaust has dual mufflers, and the bike has electronic sequential pot fuel injection and digital CDI ignition. The bike puts out 68 horsepower at 4400 rpm and a maximum torque of 73 Nm at 4100 rpm. It comes with a multi-plate clutch and diaphragm spring in oil bath and a five-speed transmission with a belt final drive. The mild steel, tubular frame, circular sections, cast junctions have a mild steel, rectangular tube sections, stamped junctions, MIG welded swingarm. The front suspension has 39mm forks with 104 mm/4.09 in wheel travel, while the rear coil-over has dual-adjustable preload with 64 mm/2.5 in wheel travel. This Harley Davidson model has a single 300mm disc, 2 38mm piston calipers, front brakes, and a single 260mm disc, 2 38mm piston calipers, rear brakes. The bike has black split 5-spoke wheels with machined rims, a rake of 31.1 degrees, and a trail of 145 mm/5.7 in. It measures 2215 mm/87.2 in in length, has a wheelbase of 1500 mm/59.1 in, and a seat height of 648 mm/25.5 in. The gross vehicle weight rating is 453.6 kg/1000 lbs, the dry weight is 234 kg/536 lbs, and the wet weight is 260 kg/573 lbs. It has a 2.7-liter/2.8 US qrts oil capacity and a 17-liter/4.5 gal fuel capacity.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster SuperLow

Year: 2013
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 883 cc / 53.9 cub in.
Bore x Stroke: 76.2 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
Exhaust: Chrome, staggered, shorty exhaust with dual mufflers
induction: Electronic Sequential Pot Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 68 hp / 50.2 kW @ 4400 rpm
Max Torque: 73 Nm / 53.8 ft/lb @ 4100 rpm
Clutch: Multi-plate clutch with diaphragm spring in oil bath
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.407 2nd 7.436 3rd 5.53 4th 4.583 5th 3.93
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Front Wheel Travel: 104 mm / 4.09 in
Rear Suspension: Coil-over, dual-adjustable preload
Rear Wheel Travel: 64 mm / 2.5 in
Front Brakes: Single 300mm disc 2 38mm piston calipers
Rear Brakes: Single 260mm disc 2 38mm piston calipers
Front Wheel: Black, Split 5-Spoke with Machined Rim
Rear Wheel: Black, Split 5-Spoke with Machined Rim
Front Tyre: 120/70 ZR-18 59W
Rear Tyre: 150/60 ZR-17 66W
Rake: 31.1 degrees
Trail: 145 mm / 5.7 in
Dimensions: Length 2215 mm / 87.2 in
Wheelbase: 1500 mm / 59.1 in
Seat Height: Laden 648 mm / 25.5 in Unladen 681 mm / 26.8 in
Gross Vehicle Weight Rating: 453.6 kg / 1000 lbs
Dry Weight: 234 kg / 536 lbs
Wet Weight: 260 kg / 573 lbs
Oil Capacity: 2.7 Litres / 2.8 US qrts
Fuel Capacity: 17 Litres / 4.5 gal

The post Harley Davidson XL 883L Sportster SuperLow (2013) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200 Forty-Eight (2013) https://motorcyclespecifications.com/harley-davidson-xl1200-forty-eight-2013-specs/ Fri, 31 Mar 2023 03:02:08 +0000 https://motorcyclespecifications.com/?p=38484 The Harley Davidson XL 1200X Forty-Eight is a 2013 motorcycle with a 1199cc V-Twin four-stroke engine, delivering 107 Nm of torque at 3500 rpm, and a five-speed transmission with a

The post Harley Davidson XL1200 Forty-Eight (2013) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 1200X Forty-Eight is a 2013 motorcycle with a 1199cc V-Twin four-stroke engine, delivering 107 Nm of torque at 3500 rpm, and a five-speed transmission with a belt final drive. It has a mild steel, tubular frame, and swingarm, while the front suspension consists of a 39mm fork and a coil-over; preload dual-adjustable rear suspension. The bike is equipped with single 300mm disc brakes, 2 x 38mm piston calipers at both the front and the rear, and black laced steel spoke wheels. The rake is 30 degrees, and the trail is 107mm, with dimensions of 2255mmx1520mmx660mm. The seat height is 660mm when laden and 681mm when unladen, with a ground clearance of 100mm. The wet weight of the motorcycle is 257.2kg, and its fuel capacity is 13.7L.


Technical specifications:

Make Model: Harley Davidson XL 1200X Forty-Eight

Year: 2013
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1199 cc / 73.2 cu in.
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Exhaust: Chrome, staggered shorty exhaust with dual slash-cut mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107 Nm / 10.9 kgf-m / 79 ft/lbs./ @ 3500 rpm
Transmission: 5 Speed
Final Drive: Belt
Primary Drive Chain: 38/57 ratio
Gear Ratio: 1st 9.315 / 2nd 6.653 / 3rd 4.948 / 4th 4.102 / 5th 3.517:1
Frame: Mild steel, tubular frame; circular sections; cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front Suspension: 39mm Fork
Front Wheel Travel: 114 mm / 5.7 in.
Rear Suspension: Coil-over; preload dual-adjustable
Rear Wheel Travel: 54 mm / 2.1 in.
Front Brakes: Single 300mm disc, 2 x 38mm piston calipers
Rear Brakes: Single 300mm disc, 2 x 38mm piston calipers
Front Wheel: Black, laced steel spokes
Rear Wheel: Black, laced steel spokes
Front Tyre: MT90B16
Rear Tyre: 150/80-B16
Rake: 30 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2255 mm / 88.7 in
Wheelbase: 1520 / 59.8 in
Seat Height: Laden 660 mm / 26.0 in Unladen 681 mm / 26.8 in.
Ground Clearance: 100 mm / 3.9 in
Wet Weight: 257.2 kg / 567 lbs
Gross Vehicle Weight Rating: 453.6 kg / 1000 lbs
Oil Capacity: 2.6 L / 0.69 US gal
Fuel Capacity: 13.7 L / 3.6 US gal

The post Harley Davidson XL1200 Forty-Eight (2013) appeared first on MotorcycleSpecifications.com.

]]>