MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson XL 883L Sportster Super Low (2016-17)

Entry updated

Harley Davidson XL 883L Sportster Super Low (2016-17)

At a glance

Capacity
883 cc / 53.9 cub in.
Power
50.2 kW / 68 hp @ 4400 rpm
Torque
73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm

The full picture.

The Harley Davidson XL 883L Sportster SuperLow motorcycle model was produced in 2016-17 with a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine and a 883 cc / 53.9 cub in capacity. It has a chrome, staggered, shorty exhaust with dual mufflers and electronic sequential port fuel injection for induction. The maximum power output is 50.2 kW / 68 hp at 4400 rpm with a maximum torque of 73 Nm / 7.4 kgf-m / 53.8 ft/lb at 3750 rpm. The motorcycle features a multi-plate clutch with diaphragm spring in oil bath and a 5 speed transmission with chain, 34/57 primary drive and belt final drive. The frame is made of mild steel with tubular frame and circular sections, cast junctions and swingarm is mild steel, rectangular tube sections, stamped junctions, MIG welded. It has a left lean angle of 24.4o and a right lean angle of 24.7o. The front suspension consists of 39 mm telescopic forks with front wheel travel of 104 mm / 4.09 in and rear suspension features a coil-over, dual-adjustable preload with rear wheel travel of 64 mm / 2.5 in. The front brakes consist of a single 300 mm disc and 2 x 38mm piston calipers.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster SuperLow

Motorcycle technical specifications
Year2016 – 17
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity883 cc / 53.9 cub in.
Bore x Stroke76.2 x 96.8 mm
Cooling SystemAir cooled
Compression Ratio9.0:1
ExhaustChrome, staggered, shorty exhaust with dual mufflers
InductionElectronic Sequential Port Fuel Injection
IgnitionDigital CDI
StartingElectric
Max Power50.2 kW / 68 hp @ 4400 rpm
Max Torque73 Nm / 7.4 kgf-m / 53.8 ft/lb @ 3750 rpm
ClutchMulti-plate clutch with diaphragm spring in oil bath
Transmission5 Speed
Primary DriveChain, 34/57
Final DriveBelt
Gear Ratio1st 10.407 / 2nd 7.436 / 3rd 5.53 / 4th 4.583 / 5th 3.93:1
FrameMild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Lean Angle, Left24.4o
Lean Angle, Right24.7o
Front Suspension39 mm Telescopic forks
Front Wheel Travel104 mm / 4.09 in
Rear SuspensionCoil-over, dual-adjustable preload
Rear Wheel Travel64 mm / 2.5 in
Front BrakesSingle 300 mm disc, 2 x 38mm piston calipers