MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Moto Guzzi Specifications

Moto Guzzi California 1400 Touring S.E. (2015-16)

Entry updated

At a glance

Capacity
1380 cc / 84.2 cu-in
Power
96 hp / 71 kW @ 6500 rpm
Torque
89 ft/lb / 121 Nm @ 3000 rpm
Seat height
740 mm / 29.1 in – 720 mm / 28.3 in

The full picture.

The Moto Guzzi California 1400 Touring S.E. was produced between 2015-2016. The motorcycle comes with a four-stroke, 90-degree V-twin engine, and has a capacity of 1380 cc. It is air/oil cooled, has a compression ratio of 10.5:1, and has a stainless steel exhaust system. The ignition is phased electronic multipoint sequential injection and has a 12V battery. It has a 6-speed manual transmission with a final overdrive and a shaft final drive. The motorcycle’s brakes consist of dual stainless steel floating discs in the front and a single stainless steel fixed disc in the back. The front and rear wheels are made of aluminum alloy, with the front wheel being 3.50 x 18 and rear wheel being 6.00 x 16. The seat height is 740-720 mm, and the ground clearance is 165 mm. It has a wet weight of 337 kg, and the fuel capacity is 20.5 liters, including a reserve of 5 liters.


Technical specifications:

Make Model: Moto Guzzi California 1400 Touring S.E.

Motorcycle technical specifications
Year2015 – 16
EngineFour stroke, 90 degrees V-twin, SOHC, 4 valves per cylinder
Capacity1380 cc / 84.2 cu-in
Bore x Stroke104 x 81.2 mm
Cooling SystemAir/ oil cooled
Compression Ratio10.5:1
Exhauststainless steel, 2-in-2 type, 3-way catalytic converter with double oxygen sensor Emissions compliance, Euro 4
LubricationWet sump
Timing System DiagramIntake valve opens 19 degrees BTDC (1-mm checking clearance) intake valve closes 55 degrees ABDC exhaust valve opens 49 degrees BBDC exhaust valve closes 12 degrees ATDC
Fuel SupplyMagneti Marelli IAW7SM; ride by wire 52 mm throttle body, IWP 243 Magneti Marelli injectors, double oxygen sensor, integrated management of 3 engine mappings, traction control, cruise control
IgnitionPhased electronic Multipoint sequential injection
Spark PlugsNGK LMAR8F, 2 per cylinder
Battery12V – 18 Ah
Alternator12 V – 550 W
StartingElectric
Max Power96 hp / 71 kW @ 6500 rpm
Max Torque89 ft/lb / 121 Nm @ 3000 rpm
ClutchSingle-disc with integrated anti-vibration buffer
Transmission6 speeds with final overdrive
Final DriveShaft
Gear Ratio1st 17/38 = 1: 2.235 2nd 20/34 = 1: 1.700 3rd 23/31 = 1: 1.348 4th 26/29 = 1: 1.115 5th 31/30 = 1: 0.968 6th 30/24 = 1: 0.8
Primary Drive26/35 = 1: 1,346)
Final Drive RatioDouble cardan joint and fixed bevel gear seat, drive ratio 10/36 = 1: 3.6)
FrameSteel tubing, closed double cradle with elastic kinematic engine mounting system to isolate vibrations.
Front SuspensionStandard swingarm, 46 mm, with radial calliper mounting bracket and telescopes on the stanchions
Front Wheel Travel120 mm / 4.7 in
Rear SuspensionSwingarm with double shock absorber with adjustable spring preload.
Rear Wheel Travel110 mm / 4.3 in
Front Brakes2x 320 mm stainless steel floating discs, Brembo radial callipers with 4 horizontally opposed pistons
Rear BrakesSingle 282 mm stainless steel fixed disc, Brembo floating calliper with 2 parallel pistons
Front wheelAluminium alloy 3.50 x 18
Rear WheelAluminium alloy 6.00 x 16
Front Tyre130/70 R18
Rear Tyre200/60 R16
Trail152 mm / 6 in
Headstock Angle32 degrees
Steering Angle38 degrees
DimensionsLength 2445 mm / 96.2 in Width 1030 mm / 40.5 in Height 1460 mm / 57.5 in
Wheelbase1676.4 mm / 66 in
Seat Height740 mm / 29.1 in – 720 mm / 28.3 in
Ground Clearance165 mm / 6.4 in
Wet Weight337 Kg / 742.9 lbs
Fuel Capacity20.5 Litres / 5.4 US gal
Reserve5 Litres / 1.3 gal