Harley Davidson FLHS 1340 Electra Glide (1983-86)

The Harley Davidson FLHS 1340 Electra Glide was produced from 1983-86 and featured a four-stroke, 45 degree V-twin engine with 2 valves per cylinder and a capacity of 1337cc. It was air-cooled and had a 8.5:1 compression ratio. There was a 38mm Keihin carburettor and a solid state electronic ignition. The bike had an electric start and could reach a max power of 67 hp at 5000 rpm and a max torque of 69 lb-ft at 3000 rpm. The transmission and drive were 4-speed, and the final drive was a chain. The front suspension was telescopic forks, and the rear was dual shocks swinging arm. The front and rear brakes were both single 254mm discs with 1 piston calipers. The front tyre was MT90-16T, and the rear tyre was MT90-16. The bike weighed 343 kg (756 lbs) dry and had a fuel capacity of 19 litres (5.0 US gal).

Technical specifications:

Make Model: Harley Davidson FLHS 1340 Electra Glide

Year: 1983 – 86
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1337 cc / 81.7 cu-in
Cooling System: Air cooled
Bore x Stroke: 88.8 x 108.0 mm
Compression Ratio: 8.5:1
Induction: 38mm Keihin Carburettor
Ignition: Solid state electronic
Starting: Electric
Max Power: 67 hp / 48.9 hp @ 5000 rpm
Max Torque: 69 lb-ft @ 3000 rpm
Transmission / Drive: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks swinging arm
Front Brakes: Single 254mm disc 1 piston caliper
Rear Brakes: Single 254mm disc 1 piston caliper.
Front Tyre: MT90-16T
Rear Tyre: MT90-16
Dry Weight: 343 kg / 756 lbs
Fuel Capacity: 19 Litres / 5.0 US gal