The Harley Davidson FLHS 1340 Electra Glide was produced from 1983-86 and featured a four-stroke, 45 degree V-twin engine with 2 valves per cylinder and a capacity of 1337cc. It was air-cooled and had a 8.5:1 compression ratio. There was a 38mm Keihin carburettor and a solid state electronic ignition. The bike had an electric start and could reach a max power of 67 hp at 5000 rpm and a max torque of 69 lb-ft at 3000 rpm. The transmission and drive were 4-speed, and the final drive was a chain. The front suspension was telescopic forks, and the rear was dual shocks swinging arm. The front and rear brakes were both single 254mm discs with 1 piston calipers. The front tyre was MT90-16T, and the rear tyre was MT90-16. The bike weighed 343 kg (756 lbs) dry and had a fuel capacity of 19 litres (5.0 US gal).
Technical specifications:
Make Model: Harley Davidson FLHS 1340 Electra Glide
| Year | 1983 – 86 |
|---|---|
| Engine | Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder. |
| Capacity | 1337 cc / 81.7 cu-in |
| Cooling System | Air cooled |
| Bore x Stroke | 88.8 x 108.0 mm |
| Compression Ratio | 8.5:1 |
| Induction | 38mm Keihin Carburettor |
| Ignition | Solid state electronic |
| Starting | Electric |
| Max Power | 67 hp / 48.9 hp @ 5000 rpm |
| Max Torque | 69 lb-ft @ 3000 rpm |
| Transmission / Drive | 4 Speed |
| Final Drive | Chain |
| Front Suspension | Telescopic forks |
| Rear Suspension | Dual shocks swinging arm |
| Front Brakes | Single 254mm disc 1 piston caliper |
| Rear Brakes | Single 254mm disc 1 piston caliper. |
| Front Tyre | MT90-16T |
| Rear Tyre | MT90-16 |
| Dry Weight | 343 kg / 756 lbs |
| Fuel Capacity | 19 Litres / 5.0 US gal |
