MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FLH 1200 Electra Glide (1975)

Entry updated

Harley Davidson FLH 1200 Electra Glide (1975)

At a glance

Capacity
1207 cc / 74 cu-in
Power
58 hp / 42.3 lb-ft @ 5150 rpm
Torque
70 lb-ft / 95 Nm @ 4000 rpm

The full picture.

The Harley Davidson FLH 1200 Electra Glide was a motorcycle produced in 1975. It had a four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder engine with a capacity of 1207 cc / 74 cu-in. The cooling system was air cooled and the compression ratio was 8.0:1. It had a Tillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump induction system and an alternator/battery ignition. The electric starting system produced a maximum power of 58 hp / 42.3 lb-ft @ 5150 rpm and max torque of 70 lb-ft / 95 Nm @ 4000 rpm. The transmission was a 4 speed system and the final drive was a chain. The motorcycle had a telescopic fork front suspension with a swinging fork rear suspension. The front and rear brakes were both single 254mm discs. The front and rear tyres both measured 5.10-16. The wet weight of the motorcycle was 340 kg / 749.6 lbs and the fuel capacity was 19 litres / 5.0 US gal.


Technical specifications:

Make Model: Harley Davidson FLH 1200 Electra Glide

Motorcycle technical specifications
Year1975
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity1207 cc / 74 cu-in
Bore x Stroke87.3 x 100.8 mm
Cooling SystemAir cooled
Compression Ratio8.0:1
InductionTillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump
IgnitionAlternator/battery
StartingElectric
Max Power58 hp / 42.3 lb-ft @ 5150 rpm
Max Torque70 lb-ft / 95 Nm @ 4000 rpm
Transmission4 Speed
Final DriveChain
Front SuspensionTelescopic forks
Rear SuspensionSwinging fork.
Front BrakesSingle 254mm disc
Rear BrakesSingle 254mm disc
Front Tyre5.10-16
Rear Tyre5.10-16
Wet Weight340 kg / 749.6 lbs
Fuel Capacity19 Litres / 5.0 US gal