MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FLH 1200 Electra Glide (1976-77)

Entry updated

Harley Davidson FLH 1200 Electra Glide (1976-77)

At a glance

Capacity
1207 cc / 74 cu-in
Power
58 hp / 42.3 lb-ft @ 5150 rpm
Torque
70 lb-ft / 95 Nm @ 4000 rpm

The full picture.

The Harley Davidson FLH 1200 Electra Glide was a motorcycle produced from 1976-77 featuring a four stroke, 45-degree V-Twin, OHV engine with a capacity of 1207 cc/74 cu-in. It had a compression ratio of 8.0:1 and used a Tillotson 1-5/8″ dual Venturi diaphragm with an accelerator pump for induction. The bike had an alternator/battery ignition system and an electric starter. The maximum power output was 58 hp/42.3 lb-ft at 5150 rpm with a maximum torque of 70 lb-ft/95 Nm at 4000 rpm. The transmission was four-speed, and the final drive was a chain. The bike had telescopic forks for the front suspension and a swinging fork for the rear suspension. Both front and rear brakes were single 254mm discs, and it had a pair of 5.10-16 tires. The bike weighed 340 kg/749.6 lbs with a fuel capacity of 19 liters/5.0 US gal.


Technical specifications:

Make Model: Harley Davidson FLH 1200 Electra Glide

Motorcycle technical specifications
Year1976 – 77
EngineFour stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity1207 cc / 74 cu-in
Bore x Stroke87.3 x 100.8 mm
Cooling SystemAir cooled
Compression Ratio8.0:1
InductionTillotson 1-5/8″ dual Venturi diaphragm w/accelerator pump
IgnitionAlternator/battery
StartingElectric
Max Power58 hp / 42.3 lb-ft @ 5150 rpm
Max Torque70 lb-ft / 95 Nm @ 4000 rpm
Transmission4 Speed
Final DriveChain
Front SuspensionTelescopic forks
Rear SuspensionSwinging fork.
Front BrakesSingle 254mm disc
Rear BrakesSingle 254mm disc
Front Tyre5.10-16
Rear Tyre5.10-16
Wet Weight340 kg / 749.6 lbs
Fuel Capacity19 Litres / 5.0 US gal