Aprilia Archives - MotorcycleSpecifications.com

Aprilia Tuareg 250 Rally (1984-85)

admin — Fri, 07 Apr 2023 14:46:01 +0000

The Aprilia Tuareg 250 Rally motorcycle was produced between 1984 and 1985. It features a two-stroke, single-cylinder engine with a capacity of 246 cc and a compression ratio of 14.0:1. The bike has a liquid cooling system and a kick start. It can produce a maximum power of 30.7 kW/42 hp at 7750 rpm and has a 5-speed transmission with a final drive of chain. The front suspension is hydraulic telescopic, while the rear suspension has a swingarm with a single shock absorber and an APS system. The brakes are drums, both front and rear. The Aprilia Tuareg 250 Rally has a front tyre size of 3.00-21 and a rear tyre size of 4.25-18. The motorcycle has a wet weight of 128 kg/282 lbs.

Technical specifications:

Make Model: Aprilia Tuareg 250 Rally

Year: 1984-85
Engine: Two stroke, single cylinder
Capacity: 246 cc / 15.0 cu in
Bore x Stroke: 76 x 61 mm
Compression Ratio: 14.0:1
Cooling System: Liquid cooled
Starting: Kick
Max Power: 30.7 kW /42 hp @ 7750 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic
Rear Suspension: Swingarm with single shock absorber, APS system
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.25-18
Wet Weight: 128 kg / 282 lbs

The post Aprilia Tuareg 250 Rally (1984-85) appeared first on MotorcycleSpecifications.com.

Aprilia RS125 R (2009)

admin — Fri, 07 Apr 2023 14:10:00 +0000

The Aprilia RS 125 R (2009) is a single cylinder, two-stroke motorcycle with a capacity of 124.8cc. It has a bore x stroke of 54 x 54.5mm and a compression ratio of 12.5:1. The bike is liquid cooled and has separate mixing with a volumetric pump for lubrication. It also features a Dell’Orto PHBH 28 carburetor and CDI electronic ignition. The bike has a maximum power of 21 kW / 28 hp at 10500 rpm and a maximum torque of 19 Nm / 1.9 kgf-m / 14.1 lb-ft at 9000 rpm. The transmission is six-speed with a wet, multi-disc clutch and chain final drive. The frame is made of cast aluminum with a reinforced box section and a sloping twin-spar frame. The front suspension is upside-down forks, 40mm with 120 mm / 4.7 in front wheel travel.

Technical specifications:

Make Model: Aprilia RS 125 R

Year: 2009
Engine: Single cylinder, two stroke, reed valves induction, aluminium cylinder with Nikasil coated liner
Capacity: 124.8 cc / 7.5 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Lubrication: Separate mixing, volumetric pump
Induction: Dell’Orto PHBH 28 carburetor
Ignition: CDI electronic ignition
Starting: Electric
Alternator: 12V, 180W
Max Power: 21 kW / 28 hp @ 10500 rpm
Max Torque: 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 10:30 / 2nd 14:29 / 3rd 17:27 / 4th 19:25 / 5th 21:24 / 6th 22:23
Primary Drive: 63:19
Final Drive: 17:40
Frame: Cast aluminium, reinforced box section, sloping twin-spar frame
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in

The post Aprilia RS125 R (2009) appeared first on MotorcycleSpecifications.com.

Aprilia RSV 1000 Mille R Factory (2005)

admin — Fri, 07 Apr 2023 13:55:58 +0000

The Aprilia RSV 1000 Mille R Factory motorcycle was produced in 2005 and has a four-stroke, longitudinal 60-degree V-twin engine with a capacity of 997.6 cc. It is liquid-cooled and has a compression ratio of 11.8:1. It features an integrated electronic engine management system with an indirect multipoint electronic injection and a throttle body diameter of 57mm. The bike has a six-speed transmission and a chain final drive. Its frame is made of box section sloping twin-spar aluminum alloy, and its suspension includes an Ohlins 43mm diameter upside-down fork with adjustable compression rebound and preload, and an aluminum alloy double banana swing arm. The front and rear tires are 120/70 ZR17 and 190/50 ZR17, respectively. The bike has a dry weight of 185 kg and a fuel capacity of 18 liters, with a top speed of 278 km/h.

Technical specifications:

Make Model: Aprilia RSV 1000 Mille R Factory

Year: 2005
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu-in
Bore x Stroke: 97 x 67.5mm
Cooling System: Liquid cooled
Compression Ratio: 11.8:1
Lubrication: Dry sump with separate oil tank
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection. Throttle body diameter 57mm.
Ignition: Digital electronic with one spark plugs per cylinder
Spark Plug: NGK, DCPR9E
Starting: Electric
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.9 lb-ft @ 7500 rpm
Clutch: Multiple disk in oil bath with patented PPC Claimed Horsepower: -assisted hydraulic control.
Transmission: 6 Speed
Final Drive: Chain, 40/16 (2.5)
Primary Drive Ratio: 60/31 (1.935)
Gear Ratio: 1st 34/15 (2.27), 2nd 31/19 (1.63), 3th 26/20 (1.3), 4th 24/22 (1.091), 5th 24/25 (0.96), 6th 23/26 (0.88)
Frame: Type: Box section sloping twin-spar aluminium alloy frame. Two-chamber adjustable ~Ahlins Racing steering damper with one-piece mounting.
Front Suspension: ~Ahlins 43 mm diameter upside-down fork with adjustable compression rebound and preload
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy double banana swing arm, APS progressive system linkage. ~Ahlins gas nytrogen hydraulic shock-absorber with adjustable rebound, compression, preload and length
Rear Wheel Travel: 133 mm / 5.2 in
Front Brakes: 2 x 320 mm discs, 4 piston radial calipers, Brembo
Rear Brakes: Single 220 mm disc, 2 piston radial caliper, Brembo
Wheels: Light forged aluminium wheels
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17
Rake: 24.8 degrees
Trail: 101.7 mm / 4.0 in
Dimensions: Length 2035 mm / 80.1 in Width 730 mm / 28.7 in Height 1130 mm / 44.5 in
Wheelbase: 1415 mm / 55.7 in
Seat Height: 810 mm / 31.9 in
Dry Weight: 185 kg / 408 lbs
Fuel Capacity: 18 Litres / 4.8 US gal
Reserve: 4 Litres / 1.1 US gal
Standing 1/4 Mile: 10.7 sec
Acceleration 60-140 km/h: 10.2 sec
Top Speed: 278.0 km/h / 172.74 mph

The post Aprilia RSV 1000 Mille R Factory (2005) appeared first on MotorcycleSpecifications.com.

Aprilia SL 750 Shiver (2013)

admin — Fri, 07 Apr 2023 13:31:09 +0000

The Aprilia SL 750 Shiver motorcycle was made in 2013 and boasts a four-stroke, longitudinal 90-degree V-twin engine with liquid cooling, a capacity of 749cc, and a 11.0:1 compression ratio. It uses an injection with Ride by Wire technology control of the throttle bodies, as well as a synthetic, 10-40 engine oil. The Shiver produces a max power of 69.3 kW / 95 hp @ 9000 rpm and max torque of 81 Nm / 8.25 kgf-m / 59.7 lb-ft @ 7000 rpm through its 6-speed transmission and chain final drive. The motorcycle has disc brakes, with 2 x ~A320 mm discs and a single ~A245 mm disc, as well as aluminium alloy wheels with 120/70 ZR17 front and 180/55 ZR17 rear tyres. The Aprilia SL 750 Shiver motorcycle has a length of 2100mm, width of 800mm at the handlebars, and height of 1135mm at the instruments. Its wheelbase is 1440mm, with a seat height of 810mm and a dry weight of 189kg. The motorcycle also has a fuel capacity of 15 litres or 3.9 US gallons, and can achieve an average consumption of 5.1 L/100km or 19.7 km/l. Finally, the Shiver can achieve a top speed of 224.3 km/h or 139.5 mph.

Technical specifications:

Make Model: Aprilia SL 750 Shiver

Year: 2013
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 749 cc / 45.7 cu-in
Bore x Stroke: 92 x 56.4 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Induction: Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies
Exhaust: Two in one system in 100% stainless steel with three-way catalytic converter and Lambda probe
Lubrication: Dry sump system with separate oil tank
Engine Oil: Synthetic, 10-40
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Alternator: 450 W @ 6000 rpm.
Max Power: 69.3 kW / 95 hp @ 9000 rpm
Max Torque: 81 Nm / 8.25 kgf-m / 59.7 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain Transmission ratio: 16/44
Gear Ratio: 1st 36:14 (2.57) / 2nd 32:17 (1.88) / 3rd 30:20 (1.5) / 4th 28:22 (1.27) / 5th 23:26 (0.88) / 6th 24:25 (0.96)
Primary Drive: Spur gears, transmission ratio: 60/31 (1.75)
Frame: Dismountable steel trellis connected with high strength bolts to aluminium side plates. Dismountable rear frame.
Front Suspension: ~A43 mm upside-down fork.
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320 mm discs, 4 piston caliper
Rear Brakes: Single ~A245 mm disc, 2 piston caliper
Front Wheel: Aluminium alloy 3.50 X 17″
Rear Wheel: Aluminium alloy 6.00 X 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Rake: 25.9 degrees
Trail: 109 mm / 4.17 in
Dimensions: Length 2100 mm / 89 in Width 800 mm / 31.8 i in (at handlebars) Height 1135 mm / 44.6 in (at instruments)
Wheelbase: 1440 mm / 5.6 in
Seat height: 810 mm / 31.6 in
Dry Weight: 189 Kg / 445 lbs
Fuel Capacity: 15 Litres / 3.9 US gal
Consumption Average: 5.1 L/100 km / 19.7 km/l / 46.3 US mpg
Standing 1/4 Mile: 12.3 sec / 176.2 km/h / 109.4 mph
Standing 1000m: 23.5 sec / 204.6 km/h / 127.1 mph
Top Speed: 224.3 km/h / 139.5 mph

The post Aprilia SL 750 Shiver (2013) appeared first on MotorcycleSpecifications.com.

Aprilia SR 50 Factory (2015)

admin — Fri, 07 Apr 2023 12:16:07 +0000

The Aprilia SR 50 Factory is a two-stroke, single-cylinder motorcycle with a capacity of 49 cc. It has a liquid-cooled cooling system and a wet sump forced lubrication system with mechanical pump. The motorcycle also features electronic direct fuel injection and an electric starting system. Its maximum power is 4.0 kW / 5.4 hp at 8500 rpm, while the maximum torque is 4.7 Nm / 0.48 kgf-m / 3.5 lb-ft at 8500 rpm.

The Aprilia SR 50 Factory has a continuous automatic variator transmission and a V-belt final drive. The frame is a split single cradle frame made of high tensile strength steel tube, while the front suspension is a telescopic hydraulic fork with a front wheel travel of 76 mm / 3.0 in. The rear suspension consists of an engine unit that acts as a swingarm and frame linkages on two radial silent block mountings, with a rear wheel travel of 70 mm / 2.8 in.

The Aprilia SR 50 Factory features front and rear brakes made of stainless steel discs and twin opposed pistons. The wheels are made of aluminum alloy and the front and rear tires are 130/60-13. The motorcycle’s dimensions are as follows: length is 1860 mm / 73.2 in; width is 805 mm / 31.7 in; wheelbase is 1120 mm / 44.1 in; and seat height is 820 mm / 32.3 in. Its fuel capacity is 7 L / 1.9 US gal, with a reserve of 1.5 L / 0.4 US gal.

Technical specifications:

Make Model: Aprilia SR 50 Factory

Year: 2015
Engine: Two stroke, single cylinder
Capacity: 49 cc / 3.0 cu in
Bore x Stroke: 39 x 41.35 mm
Cooling System: Liquid cooled
Lubrication: Wet sump forced lubrication system with mechanical pump
Exhaust: Single, Euro 2
Induction: Electronic direct fuel injection
Starting: Electric
Max Power: 4.0 kW / 5.4 hp @ 8500 rpm
Max Torque: 4.7 Nm / 0.48 kgf-m / 3.5 lb-ft @ 8500 rpm
Transmission: Continuous automatic variator
Final Drive: V-belt
Frame: Split single cradle frame in high tensile strength steel tube
Front Suspension: Telescopic hydraulic fork
Front Wheel Travel: 76 mm / 3.0 in
Rear Suspension: Engine unit acting as swingarm; frame linkages on two radial silent block mountings
Rear Wheel Travel: 70 mm / 2.8 in
Front Brakes: ~A190 mm Stainless steel disc brake with twin opposed pistons
Rear Brakes: ~A190 mm Stainless steel disc, racing caliper with twin opposed pistons
Wheels: Aluminium alloy
Front Tyre: 130/60-13
Rear Tyre: 130/60-13
Dimensions: Length: 1860 mm / 73.2 in Width: 805 mm / 31.7 in
Wheelbase: 1120 mm / 44.1 in
Seat Height: 820 mm / 32.3 in
Fuel Capacity: 7 L / 1.9 US gal
Reserve: 1.5 L / 0.4 US gal

The post Aprilia SR 50 Factory (2015) appeared first on MotorcycleSpecifications.com.

Aprilia Tuareg 350 Wind (1987)

admin — Fri, 07 Apr 2023 11:57:59 +0000

Aprilia Tuareg 350 Wind (1987) is a four-stroke, single-cylinder, SOHC, 4-valve motorcycle with a capacity of 349 cc. It has a compression ratio of 9.6:1 and is a kick-start motorcycle. The maximum power it can produce is 24 kW/33 hp @ 7500 rpm, and maximum torque is 47.1 Nm/4.8 kgf-m 34.7 ft-lb @ 6500 rpm. It features a 6-speed transmission and chain final drive. The motorcycle has a hydraulic telescopic front suspension and a swingarm with a single shock absorber rear suspension. The front and rear brakes are single-disc, and the bike has a dry weight of 166 kg / 366 lbs and a wet weight of 174 kg / 384 lbs. The fuel tank capacity of the bike is 30 liters / 7.9 US gal, and its maximum speed is 144 km/h / 89 mph, while it can complete the standing 1/4 mile in 15.3 seconds at a speed of 127 km/h / 79 mph.

Technical specifications:

Make Model: Aprilia Tuareg 350 Wind

Year: 1987
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79.5 x 70.4mm
Compression Ratio: 9.6:1
Cooling System: Air cooled
Starting: Kick
Max Power: 24 kW / 33 hp @ 7500 rpm
Max Torque: 47.1 Nm / 4.8 kgf-m 34.7 ft-lb @ 6500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Hydraulic telescopic
Rear Suspension: Swingarm with single shock absorber
Front Brakes: Single disc
Rear Brakes: Single disc
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 166 kg / 366 lbs
Wet Weight: 174 kg / 384 lbs
Fuel Capacity: 30 Litres / 7.9 US gal
Standing 1/4 Mile: 15.3 sec / 127 km/h / 79 mph
Top Speed: 144 km/h / 89 mph

The post Aprilia Tuareg 350 Wind (1987) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 125 (2003-05)

admin — Fri, 07 Apr 2023 05:46:58 +0000

The Aprilia Tuono 125 is a two-stroke, single cylinder motorcycle with a 125.1 cc capacity and a 12.5:1 compression ratio. It has a liquid cooling system, a ~A28 mm Dell’Orto PHBH BD carburetor, and CDI ignition. The bike produces a maxim power of 10.4 Nm or 14 hp, and a maximum torque of 16.25 Nm or 12 ft-lb. It has a six-speed transmission and chain final drive. The frame is an aluminum twin spar, while the front suspension is a ~A40 mm upside-down hydraulic action telescopic fork with 120 mm or 4.7 inches of front wheel travel. The rear suspension is a cast aluminum swing-arm with asymmetrical members, a thin-walled structural shell, and a hydraulic mono-shock with adjustable spring preload. The rear wheel travel is also 120 mm or 4.7 inches. The front brakes consist of a single ~A320 mm disc and a 4-piston caliper, while the rear brakes have a single ~A220 mm disc and a 2-piston caliper. The front tire is 110/70-17, and the rear tire is 150/60-17. This motorcycle was manufactured from 2003 to 2005.

Technical specifications:

Make Model: Aprilia Tuono 125

Year: 2003 – 05
Engine: Two stroke, single cylinder
Capacity: 125.1 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Induction: ~A28 mm Dell’Orto PHBH BD carburetor
Ignition: CDI
Starting: Electric
Max Power: 10.4 Nm / 14 hp
Max Torque: 16.25 Nm / 1.66 kgf-m / 12 ft-lb
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin spar
Front Suspension: ~A40 mm Upside-down hydraulic action telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Cast Aluminium swing-arm with asymmetrical members and thin walled structural shell. Hydraulic monoshock with adjustable spring preload
Rear Wheel travel: 120 mm / 4.7 in
Front Brakes: Single ~A320 mm disc, 4 piston caliper
Rear Brakes: Single ~A220 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17

The post Aprilia Tuono 125 (2003-05) appeared first on MotorcycleSpecifications.com.

Aprilia SR Max 300 (2010-11)

admin — Thu, 06 Apr 2023 23:23:00 +0000

The Aprilia SR Max 300 motorcycle was produced in 2010-11 and has a four-stroke, single-cylinder, SOHC, 4-valve engine with a capacity of 278cc. It has a liquid cooling system and operates on electronic injection. The bike has an electric starter and a centrifugal dry clutch, along with an automatic (CVT) transmission with torque server. The final drive is through a belt. The motorcycle has front and rear suspension consisting of hydraulic telescopic forks and double hydraulic shock absorbers with preload adjustment, respectively. Brakes are single discs, with the front at ~260mm and the rear at ~240mm. The bike features front and rear tires with sizes of 120/70-15 and 140/60-14, respectively. The seat height is 815mm/32.1in, and the dimensions are 2110mm/83.1in (length), 780mm/30.7in (width), and 1515mm/59.6in (wheelbase). The fuel capacity is 15.5 liters/4.1 US gal, and the fuel reserve is 2.8L/0.7 US gal. The motorcycle has an average fuel consumption of 4L/100km or 25 km/l or 59 US mpg. It has a max power of 16.4 kW/22 hp at 7500 rpm and max torque of 23 Nm/2.3 kgf-m/17.0 lb-ft at 6000 rpm. According to Motorcycle News and Cars Guide, the Aprilia SR Max 300 has received positive reviews.

Technical specifications:

Make Model: Aprilia SR Max 300

Year: 2010-11
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 278 cc / 17.0 cu in
Bore x Stroke: 75 x 63 mm
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Electronic injection
Starting: Electric
Clutch: Double cradle trellis in high strength steel tubing
Max Power: 16.4 kW / 22 hp @ 7500 rpm
Max Torque: 23 Nm / 2.3 kgf-m / 17.0 lb-ft @ 6000 rpm
Clutch: Centrifugal dry clutch
Transmission: Automatic (CVT) with torque server
Final Drive: Belt
Front Suspension: ~A35 mm Hydraulic telescopic fork
Rear Suspension: Double hydraulic shock absorber with preload adjustment
Front Brakes: Single ~A260 mm disc
Rear Brakes: Single ~A240 mm disc
Front Tyre: 120/70-15
Rear Tyre: 140/60-14
Seat Height: 815 mm / 32.1 in
Dimensions: Length: 2110 mm / 83.1 in Width: 780 mm / 30.7 in
Wheelbase: 1515 mm / 59.6 in
Fuel Capacity: 15.5 liters / 4.1 US gal
Fuel Reserve: 2.8 L / 0.7 US gal
Average Fuel Consumption: 4 L/100 km / 25 km/l / 59 US mpg
Reviews: Motorcycle News / Cars Guide

The post Aprilia SR Max 300 (2010-11) appeared first on MotorcycleSpecifications.com.

Aprilia Tuarg 600 Wind (1990-91)

admin — Thu, 06 Apr 2023 22:23:00 +0000

The Aprilia Tuareg 600 Wind motorcycle was produced from 1990 to 1991 and boasted a four-stroke, single-cylinder, SOHC engine with a 562cc capacity and a compression ratio of 9.4:1. It was air-cooled and used a wet sump lubrication system, with an electronic ignition and an electric starter. The bike was capable of producing a maximum power output of 34 kW (46 hp) at 7100 rpm and a maximum torque of 58 Nm (5.9 kgf-m or 42.8 ft-lb) at 5800 rpm. It had a 6-speed transmission and a chain final drive.

The Aprilia Tuareg 600 Wind featured a front suspension system with a 40 mm fork and a rear suspension system with a monoshock that had an adjustable preload. The front and rear wheels had travel distances of 210 mm (8.3 in) and 220 mm (8.7 in) respectively. The front brake system used a single 300 mm disc and a 2-piston caliper, while the rear brake system used a single 220 mm disc. The front and rear wheels were fitted with 90/90-21 and 130/80-18 tires respectively.

Overall, the Aprilia Tuareg 600 Wind was a versatile bike that performed well both on and off-road. Its rugged design, reliable engine, and comfortable suspension made it a popular choice among adventure riders.

Technical specifications:

Make Model: Aprilia Tuareg 600 Wind

Year: 1990 – 91
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 562 cc / 34.3 cu in
Bore x Stroke: 94 x 81 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled
Lubrication: Wet sump
Induction: ~A35 mm Dell’Orto PHBR35BD carburetor
Ignition: Nipponese electronic
Starting: Electric
Max Power: 34 kW / 46 hp @7100 rpm
Max Power Rear Tyre: 29.9 kW / 40.07 hp @ 7000 rpm
Max Torque: 58 Nm / 5.9 kgf-m / 42.8 ft-lb @ 5800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: ~A40 mm Fork
Front Wheel Travel: 210 mm / 8.3 in
Rear Suspension: Monoshock with adjustable preload.
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Rear Brakes: Single ~A220 mm disc
Front Tyre: 90/90-21
Rear Tyre: 130/80-18

The post Aprilia Tuarg 600 Wind (1990-91) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000R Factory (2009)

admin — Thu, 06 Apr 2023 20:13:06 +0000

The Aprilia Tuono 1000 R Factory motorcycle was introduced in 2009 with a 997.6 cc engine that utilizes four-stroke longitudinal 60 degrees V twin technology, which produces 139 horsepower at 9500 rpm and a maximum torque of 107 Nm at 8500 rpm. The bike features a liquid-cooling system and a dry sump with a separate oil reservoir, along with a double trochoidal pump with oil cooler. It has a 6-speed transmission with a chain final drive and a primary drive ratio of 60:31 and a final drive ratio of 40:16. The clutch is a multiple disk in oil bath with patented PPC power-assisted hydraulic control. The frame is a box section sloping twin-spar frame in aluminum alloy, which has a removable aluminum alloy saddle mount frame. The bike also includes an integrated electronic engine management system for indirect multipoint electronic injection and a digital electronic ignition system with one spark plug per cylinder. The Aprilia Tuono 1000 R Factory has a 25-degree rake and is designed for high performance.

Technical specifications:

Make Model: Aprilia Tuono 1000 R Factory

Year: 2009
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Exhaust: Two-into-two, Euro3
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A57 mm throttle bodies.
Ignition: Digital electronic with one spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 500W
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.8 ft-lb @ 8500 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 34:15 / 2nd 31:19 / 3rd 26:20 / 4th 24:22 / 5th 24:25 / 6th 23:26
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 40:16
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees

The post Aprilia Tuono 1000R Factory (2009) appeared first on MotorcycleSpecifications.com.

Aprilia SMV 750 Dorsoduro (2014)

admin — Thu, 06 Apr 2023 16:25:15 +0000

The Aprilia SMV 750 Dorsoduro is a 2014 motorcycle with a four-stroke, longitudinal 90-degreeV twin engine that has a capacity of 749.9 cc. It has an 11.0:1 compression ratio, a liquid-cooled cooling system, and a 2 into 1 exhaust system in 100% stainless steel with a three-way catalytic converter and lambda probe. The engine management system is integrated, and the latest generation has three maps (Sport, Touring, Rain) and a Ride-by-Wire throttle management. The ignition is digital electronic, and it has two spark plugs per cylinder. The motorcycle has a multiplate wet clutch, hydraulically operated, and a 6-speed transmission with a final chain drive. The frame is made of modular steel trellis, and the suspension is an ~A43 mm upside-down fork for the front and an aluminium alloy swingarm with reinforcement truss and hydraulic shock absorber adjustable in spring preload and rebound damping for the rear. The brakes consist of two ~A320 mm discs with a 4 piston caliper for the front and a single ~A240 mm disc with a 1 piston caliper for the rear. The motorcycle has aluminum alloy wheels, with a front tire size of 120/70 ZR17 and a rear tire size of 190/55 ZR17. It has a length of 2216 mm, a width of 905 mm, and a height of 1185 mm at the instrument panel. The seat height is 870 mm, and the dry weight is 186 kg. The motorcycle has a fuel capacity of 12 liters and has an average consumption of 5.3 L/100 km. Its standing 0-100 km/h time is 3.9 seconds. The motorcycle can reach a top speed of 202.9 km/h, or 126 mph.

Technical specifications:

Make Model: Aprilia SMV 750 Dorsoduro

Year: 2014
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 749.9 cc / 45.7 cu-in
Bore x Stroke: 92 x 56.4 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Exhaust: 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe
Lubrication: Wet sump
Induction: Integrated engine management system. Latest generation 3 maps (Sport, Touring, Rain) Ride-by-Wire throttle management.
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Max Power: 67.3 kW / 92 hp @ 8750 rpm
Max Torque: 82 Nm / 8.36 kgf-m / 60.4 lb/ft / @ 4500 rpm
Clutch: Multiplate wet clutch, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 36:14 (2.57) / 2nd 32:17 (1.88) / 3rd 30:20 (1.5) / 4th 28:22 (1.27) / 5th 23:/26 (0.88) / 6th 24:25 (0.96)
Frame: Modular steal trellis secured to albumin side plates by high steal bolts.
Front Suspension: ~A43 mm Upside-down fork.
Front Wheel Travel: 167 mm / 6.5 in
Rear Suspension: Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping.
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: 2 x ~A320 mm discs, 4 piston caliper
Rear Brakes: Single ~A240 mm disc, 1 piston caliper
Wheels: Aluminium alloy
Front Wheel: 3.5 x 17
Rear Wheel: 6.00 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Dimensions: Length 2216 mm / 8732 in Width 905 mm / 35.6 in Height 1185 mm / 46.6 in at instrument panel
Seat height: 870 mm / 34.2 in
Dry Weight: 186 kg / 409 lbs
Fuel Capacity: 12 Litres / 3.17 US gal
Consumption Average: 5.3 L/100 km / 18.8 km/l / 44.2 US mpg
Standing 0 – 100 km/h: 3.9 sec
Standing 0 – 140 km/h: 7.1 sec
Standing 1/4 Mile: 12.8 sec
Acceleration 60-100 km/h: 4.5 sec
Acceleration 60-140 km/h: 9.5 sec
Acceleration 100-140 km/h: 7.1 sec
Top Speed: 202.9 km/h / 126 mph

The post Aprilia SMV 750 Dorsoduro (2014) appeared first on MotorcycleSpecifications.com.

Aprilia SMV 750 Dorsoduro (2011)

admin — Thu, 06 Apr 2023 15:51:10 +0000

The 2011 Aprilia SMV 750 Dorsoduro is a motorcycle with a four-stroke longitudinal 90-degree V-twin engine, DOHC, 4 valves per cylinder, and a capacity of 749.9 cc. It has a compression ratio of 11.0:1 and a cooling system that is liquid cooled. Its exhaust system is a 2 into 1 system made of 100% stainless steel with a three-way catalytic converter and lambda probe. The motorcycle has an integrated engine management system with the latest generation of 3 maps (Sport, Touring, Rain) ride-by-wire throttle management. It has a maximum power of 67.3 kW/92 hp and a maximum torque of 82 Nm/8.36 kgf-m/60.4 lb/ft at 4500 rpm. The bike has a multiplate wet clutch, hydraulically operated, and a six-speed transmission with a final drive chain. The frame is a modular steel trellis secured to aluminum side plates by high steel bolts. The bike has front suspension of a 43mm upside-down fork, a front wheel travel of 167mm/6.5in, and a rear suspension of an aluminum alloy swingarm with reinforcement truss. The rear wheel travel is 150mm/5.9in. The front brakes are 2 x 320 mm discs and 4 piston calipers, while the rear brake is a single 240 mm disc with 1 piston caliper. The wheels are made of aluminum alloy, the front wheel is 3.5 x 17, and the rear wheel is 6.00 x 17. The motorcycle has a length of 2216mm/8732in, a width of 905 mm/35.6 in, and a height of 1185 mm/46.6 in at the instrument panel. The seat height is 870 mm/34.2 in, and the dry weight is 186 kg/409 lbs. It has a fuel capacity of 12 liters/3.17 US gal and an average consumption of 5.3 L/100 km/18.8 km/l/44.2 US mpg. The standing 0–100 km/h acceleration is 3.9 sec, and the top speed is 202.9 km/h/126 mph.

Technical specifications:

Make Model: Aprilia SMV 750 Dorsoduro

Year: 2011
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 749.9 cc / 45.7 cu-in
Bore x Stroke: 92 x 56.4 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Exhaust: 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe
Lubrication: Wet sump
Induction: Integrated engine management system. Latest generation 3 maps (Sport, Touring, Rain) Ride-by-Wire throttle management.
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Max Power: 67.3 kW / 92 hp @ 8750 rpm
Max Torque: 82 Nm / 8.36 kgf-m / 60.4 lb/ft / @ 4500 rpm
Clutch: Multiplate wet clutch, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 36:14 (2.57) / 2nd 32:17 (1.88) / 3rd 30:20 (1.5) / 4th 28:22 (1.27) / 5th 23:/26 (0.88) / 6th 24:25 (0.96)
Frame: Modular steal trellis secured to albumin side plates by high steal bolts.
Front Suspension: ~A43 mm Upside-down fork.
Front Wheel Travel: 167 mm / 6.5 in
Rear Suspension: Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping.
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: 2 x ~A320 mm discs, 4 piston caliper
Rear Brakes: Single ~A240 mm disc, 1 piston caliper
Wheels: Aluminium alloy
Front Wheel: 3.5 x 17
Rear Wheel: 6.00 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Dimensions: Length 2216 mm / 8732 in Width 905 mm / 35.6 in Height 1185 mm / 46.6 in at instrument panel
Seat height: 870 mm / 34.2 in
Dry Weight: 186 kg / 409 lbs
Fuel Capacity: 12 Litres / 3.17 US gal
Consumption Average: 5.3 L/100 km / 18.8 km/l / 44.2 US mpg
Standing 0 – 100 km/h: 3.9 sec
Standing 0 – 140 km/h: 7.1 sec
Standing 1/4 Mile: 12.8 sec
Acceleration 60-100 km/h: 4.5 sec
Acceleration 60-140 km/h: 9.5 sec
Acceleration 100-140 km/h: 7.1 sec
Top Speed: 202.9 km/h / 126 mph

The post Aprilia SMV 750 Dorsoduro (2011) appeared first on MotorcycleSpecifications.com.

Aprilia SMV 1200 Dorsoduro (2011)

admin — Thu, 06 Apr 2023 10:46:02 +0000

The Aprilia SMV 1200 Dorsoduro motorcycle was released in 2011 and is powered by a four-stroke, 90-degree V-twin engine with a capacity of 1197cc. It has a liquid-cooled system with a compression ratio of 12.5:1 and an ignition system with two spark plugs per cylinder integrated with the injection system. It has six-speed transmission and a chain final drive. The bike has a modular tubular steel frame and an aluminium side plate with a removable rear aluminium subframe. The suspension system includes a Sachs upside-down fork with fully adjustable compression and rebound damping and spring preload at the front and an aluminium alloy swingarm with Piggy-back design Sachs hydraulic shock absorber with fully adjustable compression and rebound damping and spring preload at the rear. The brakes include two 320mm stainless steel floating discs with radial calipers with four pistons at the front and a single 240mm, single-piston caliper with a metal braided brake pipe at the rear. The wheels are made of aluminium alloy with the front tyre measuring 120/70-ZR17 and the rear tyre measuring 180/55-ZR17. The bike has a length of 2216mm, a width of 905mm at the handlebar, and a height of 1185mm at the instrument panel. Its dry weight is 212 kg and it has a fuel capacity of 12 litres. It can cover an average consumption of 5.9 L/100 km and has a top speed of 230.2 km/h.

Technical specifications:

Make Model: Aprilia SMV 1200 Dorsoduro

Year: 2011
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder Twin Spark
Capacity: 1197 cc / 73.0 cu-in
Bore x Stroke: 106 x 67.8 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Induction: Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Exhaust: 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe
Clutch: Multiple discs in oil bath, hydraulically operated
Max Power: 96 kW / 130 hp @ 8700 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 84.8 lb-ft @ 7200 rpm
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 14:36 / 2nd 17:32 / 3rd 20:30 / 4th 22:28 / 5th 23:26 / 6th 24:25
Frame: Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear aluminium subframe
Front Suspension: ~A43 mm Sachs upside-down front fork with fully adjustable compression and rebound damping and spring preload.
Front Wheel Travel: 160 mm / 6.2 in
Rear Suspension: Aluminium alloy swingarm Piggy-back design Sachs hydraulic shock absorber with fully adjustable compression and rebound damping and spring preload.
Rear Wheel Travel: 155 mm / 6.1 in
Front Brakes: 2 x ~A320 mm stainless steel floating discs. Radial calipers with four pistons
Rear Brakes: Single ~A240 mm, single piston caliper, metal braided brake pipe
Wheels: Aluminium alloy
Front Tyre: 120/70 -ZR17
Rear Tyre: 180/55 -ZR17
Dimensions: Length 2216 mm / 8732 in Width 905 mm / 35.6 in handlebar Height 1185 mm / 46.6 in at instrument panel
Seat height: 870 mm / 34.2 in
Dry Weight: 212 kg / 409 lbs
Fuel Capacity: 12 Litres / 3.17 gal
Average Consumption: 5.9 L/100 km / 17.0 km/l / 40 US mpg
Standing 1/4 Mile: 11.5 sec
Top Speed: 230.2 km/h / 143 mph

The post Aprilia SMV 1200 Dorsoduro (2011) appeared first on MotorcycleSpecifications.com.

Aprilia SMV 1200 Dorsoduro (2012)

admin — Thu, 06 Apr 2023 10:18:00 +0000

The Aprilia SMV 1200 Dorsoduro 2012 is a motorcycle with a four stroke, longitudinal 90 degreesV twin engine and a capacity of 1197 cc. It has liquid cooling and an integrated engine management system with injection and Ride by Wire technology. The frame is a modular tubular steel frame fastened to aluminium side plates, and the front suspension is a A43 mm Sachs upside-down fork with fully adjustable compression, rebound damping, and spring preload. The rear suspension is an aluminium alloy swingarm Piggy-back design Sachs hydraulic shock absorber with the same features as the front suspension. The front brakes are two A320 mm stainless steel floating discs with radial calipers and four pistons, while the rear brakes have a single A240 mm, single piston caliper, and metal braided brake pipe. The wheels are made of aluminium alloy, and the front tyre size is 120/70 -ZR17 while the rear tyre size is 180/55 -ZR17. The motorcycle has a dry weight of 212 kg and a fuel capacity of 12 litres. The average consumption of the bike is 5.9 L/100 km, and it can reach a standing 1/4 mile in 11.5 sec and a top speed of 230.2 km/h. The Aprilia SMV 1200 Dorsoduro 2012 is a high-performance bike with advanced technology, making it ideal for riders looking for a powerful and reliable motorcycle.

Technical specifications:

Make Model: Aprilia SMV 1200 Dorsoduro

Year: 2012
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder Twin Spark
Capacity: 1197 cc / 73.0 cu-in
Bore x Stroke: 106 x 67.8 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Induction: Integrated engine management system. Injection with Ride by Wire technology control of the throttle bodies
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Exhaust: 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe
Clutch: Multiple discs in oil bath, hydraulically operated
Max Power: 96 kW / 130 hp @ 8700 rpm
Max Torque: 115 Nm / 11.7 kgf-m / 84.8 lb-ft @ 7200 rpm
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 14:36 / 2nd 17:32 / 3rd 20:30 / 4th 22:28 / 5th 23:26 / 6th 24:25
Frame: Modular tubular steel frame fastened to aluminium side plates by high strength bolts. Removable rear aluminium subframe
Front Suspension: ~A43 mm Sachs upside-down front fork with fully adjustable compression and rebound damping and spring preload.
Front Wheel Travel: 160 mm / 6.2 in
Rear Suspension: Aluminium alloy swingarm Piggy-back design Sachs hydraulic shock absorber with fully adjustable compression and rebound damping and spring preload.
Rear Wheel Travel: 155 mm / 6.1 in
Front Brakes: 2 x ~A320 mm stainless steel floating discs. Radial calipers with four pistons
Rear Brakes: Single ~A240 mm, single piston caliper, metal braided brake pipe
Wheels: Aluminium alloy
Front Tyre: 120/70 -ZR17
Rear Tyre: 180/55 -ZR17
Dimensions: Length 2216 mm / 8732 in Width 905 mm / 35.6 in handlebar Height 1185 mm / 46.6 in at instrument panel
Seat height: 870 mm / 34.2 in
Dry Weight: 212 kg / 409 lbs
Fuel Capacity: 12 Litres / 3.17 gal
Average Consumption: 5.9 L/100 km / 17.0 km/l / 40 US mpg
Standing 1/4 Mile: 11.5 sec
Top Speed: 230.2 km/h / 143 mph

The post Aprilia SMV 1200 Dorsoduro (2012) appeared first on MotorcycleSpecifications.com.

Aprilia Tuareg 125 Rally (1984)

admin — Thu, 06 Apr 2023 09:58:00 +0000

The Aprilia Tuareg 125 Rally motorcycle was produced in a limited quantity of 700 units in 1984. The motorcycle is powered by a liquid-cooled, two-stroke, single-cylinder engine with a capacity of 124 cc and a compression ratio of 15.5:1. It has a kick starter and can generate 18.6 kW or 25 horsepower at 9000 rpm. The motorcycle is equipped with a six-speed transmission and final chain drive. The front suspension of the Aprilia Tuareg 125 Rally is a telescopic fork while the rear suspension is mono-shock. The motorcycle has a single disc front brake and a rear drum brake. It has a wet weight of 120 kg or 265 pounds and can carry 18 litres or 7.6 US gallons of fuel. The top speed of the Aprilia Tuareg 125 Rally is 130 km/h or 81 mph with a front tyre of 2.75-21 and rear tyre of 4.60-17.

Technical specifications:

Make Model: Aprilia Tuareg 125

Year: 1984 –
Production: 700 units
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 15.5:1
Cooling System: Liquid cooled
Starting: Kick
Max Power: 18.6 kW / 25 hp @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Mono shock
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Wet Weight: 120 kg / 265 lbs
Fuel Capacity: 18 Litres / 7.6 US gal
Top Speed: 130 km/h / 81 mph

The post Aprilia Tuareg 125 Rally (1984) appeared first on MotorcycleSpecifications.com.

Aprilia TX 311M (1985)

admin — Thu, 06 Apr 2023 06:59:58 +0000

The Aprilia TX 311M is a motorcycle manufactured in 1985. It has a single cylinder, two-stroke engine with a capacity of 277cc and a compression ratio of 8.5:1. The engine is liquid-cooled and has electronic ignition. The motorcycle has a kick-start and a maximum power of 12.4 kW/ 17 hp at 6400 rpm. The transmission has six speeds, and the final drive is through a chain. The front suspension consists of a telescopic fork, while the rear suspension features a monoshock. Braking is provided by a single disc in the front and an expanding drum at the back. The Aprilia TX 311M has a 2.75-21 tyre in the front and a 4.00-18 tyre at the back. It weighs 85 kg/ 187 lbs, has a fuel capacity of 6.5 L/ 1.7 US gal, and can attain a top speed of 125 km/h/ 78 mph.

Technical specifications:

Make Model: Aprilia TX 311M

Year: 1985
Engine: Single cylinder, two stroke
Capacity: 277cc / 16.9 cu in
Bore x Stroke: 76 x 61 mm
Compression Ratio: 8.5:1
Cooling System: Liquid cooled
Ignition: Electronic
Starting: Kick
Max Power: 12.4 kW/ 17 hp @ 6400 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Monoshock
Front Brakes: ingle disc
Rear Brakes: Expanding drum
Front Tyre: 2.75-21
Rear Tyre: 4.00-18
Wet Weight: 85 kg / 187 lbs
Fuel Capacity: 6.5 L / 1.7 US gal
Top Speed: 125 km/h / 78 mph

The post Aprilia TX 311M (1985) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000R Limited Edition (2003)

admin — Wed, 05 Apr 2023 23:16:04 +0000

The Aprilia Tuono 1000R Limited Edition was produced in 2003, with only 200 units made. The motorcycle is powered by a four-stroke longitudinal 60-degree V-twin DOHC engine with a capacity of 997.6cc. The engine features four valves per cylinder, a compression ratio of 11.4:1, and is liquid-cooled with dry sump and a separate oil reservoir. The bike has an integrated electronic engine management system with indirect multipoint electronic injection and two spark plugs per cylinder. The Tuono 1000R Limited Edition has a maximum power output of 94kW (126hp) at 9500rpm and a maximum torque of 101Nm (74.5 ft-lb) at 7250rpm. The transmission is a 6-speed with a chain final drive and a primary drive ratio of 60:31 and a final drive ratio of 42:17. The motorcycle has a multiple disk in oil bath clutch with patented PPC power-assisted hydraulic control. The frame of the motorcycle is made of box section sloping twin-spar frame in aluminum alloy with a removable aluminum alloy saddle mount frame, and a 25-degree rake.

Technical specifications:

Make Model: Aprilia Tuono 1000R Limited Edition

Year: 2003
Production: 200 units
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.4:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A51 mm throttle bodies.
Ignition: Digital electronic with two spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 400W
Max Power: 94 kW / 126 hp @ 9500 rpm
Max Torque: 101 Nm / 10.3 kgf-m / 74.5 ft-lb @ 7250 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 35:14 / 2nd 28:16 / 3rd 26:19 / 4th 24:22 / 5th 22:23 / 6th 23:27
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 42:17
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees

The post Aprilia Tuono 1000R Limited Edition (2003) appeared first on MotorcycleSpecifications.com.

Aprilia SXV 550 (2010-11)

admin — Wed, 05 Apr 2023 19:29:12 +0000

The 2010-11 Aprilia SXV 550 is a four-stroke, 77-degree V-twin motorcycle with a 549cc capacity and a compression ratio of 12.0:1. It features a liquid cooling system, dry sump lubrication with an external oil tank, and an integrated engine management system controlling ignition and fuel injection. With a maximum power of 52.2 kW or 70 hp, the bike has a five-speed transmission with a chain final drive. It has a steel perimeter frame with alloy vertical members, a front suspension of approximately 48mm upside-down fork, and a rear suspension of a box-section aluminium swingarm with a cast body and hydraulic monoshock. The front brakes consist of a single approximately 320mm disc with a four-piston caliper, and the rear brakes use a single approximately 240mm disc with a two-piston caliper. The front tyre has dimensions of 120/70 -17, and the rear tyre measures 180/55 -17.

Technical specifications:

Make Model: Aprilia SXV 550

Year: 2010 – 11
Engine: Four stroke, 77 degrees V-twin, SOHC
Capacity: 549 cc / 33.5 cu in
Bore x Stroke: 80 x 55mm
Compression Ratio: 12.0:1
Cooling System: Liquid cooled
Lubrication System: Dry sump with external oil tank. Separate gearbox lubrication.
Induction: Integrated engine management system controlling ignition and fuel injection. Throttle body: ~A38 mm
Ignition: Electronic
Starting: Electric
Clutch: Cable operated multi-plate wet clutch.
Max Power: 52.2 kW / 70 hp
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 13:30 / 2nd 15:27 / 3rd 16:23 / 4th 20:23 / 5th 21:21
Frame: Steel perimeter frame with alloy vertical members
Front Suspension: ~A48 mm Upside down fork, double adjustment.
Rear Suspension: Box section aluminium swingarm with cast body, hydraulic monoshock with compression and rebound adjustment
Front Brakes: Single ~A320mm disc, 4 piston caliper
Rear Brakes: Single ~A240mm disc, 2 piston caliper
Front Tyre: 120/70 -17
Rear Tyre: 180/55 -17

The post Aprilia SXV 550 (2010-11) appeared first on MotorcycleSpecifications.com.

Aprilia SMV 750 Dorsoduro (2010)

admin — Wed, 05 Apr 2023 18:28:59 +0000

The Aprilia SMV 750 Dorsoduro (2010) is a four-stroke motorcycle with a longitudinal 90-degree V twin engine, DOHC, and four valves per cylinder. The bike has a capacity of 749.9 cc / 45.7 cu-in, a 11.0:1 compression ratio, and is liquid cooled. It has an integrated engine management system and latest generation 3 maps (Sport, Touring, Rain) Ride-by-Wire throttle management. The bike is electronically ignited and has two spark plugs per cylinder. The six-speed transmission is chain-driven with a wet sump lubrication system. The motorcycle has a modular steel trellis frame secured to albumin side plates by high steel bolts, and front suspension of A43 mm Upside-down fork. The front brakes include two A320 mm discs and a 4 piston caliper, while the rear brakes include a single A240 mm disc and 1 piston caliper. The Aprilia SMV 750 Dorsoduro (2010) weighs 186 kg / 409 lbs and has a fuel capacity of 12 litres / 3.17 US gal. The motorcycle has a top speed of 202.9 km/h / 126 mph and can reach standing 0-100 km/h in 3.9 seconds.

Technical specifications:

Make Model: Aprilia SMV 750 Dorsoduro

Year: 2010
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 749.9 cc / 45.7 cu-in
Bore x Stroke: 92 x 56.4 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Exhaust: 2 into 1 exhaust system in 100% stainless steel with three-way catalytic converter and lambda probe
Lubrication: Wet sump
Induction: Integrated engine management system. Latest generation 3 maps (Sport, Touring, Rain) Ride-by-Wire throttle management.
Ignition: Digital electronic, integrated with the injection, two spark plugs per cylinder
Starting: Electric
Max Power: 67.3 kW / 92 hp @ 8750 rpm
Max Torque: 82 Nm / 8.36 kgf-m / 60.4 lb/ft / @ 4500 rpm
Clutch: Multiplate wet clutch, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 36:14 (2.57) / 2nd 32:17 (1.88) / 3rd 30:20 (1.5) / 4th 28:22 (1.27) / 5th 23:/26 (0.88) / 6th 24:25 (0.96)
Frame: Modular steal trellis secured to albumin side plates by high steal bolts.
Front Suspension: ~A43 mm Upside-down fork.
Front Wheel Travel: 167 mm / 6.5 in
Rear Suspension: Aluminium alloy swingarm with reinforcement truss. Hydraulic shock absorber adjustable in spring preload and rebound damping.
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: 2 x ~A320 mm discs, 4 piston caliper
Rear Brakes: Single ~A240 mm disc, 1 piston caliper
Wheels: Aluminium alloy
Front Wheel: 3.5 x 17
Rear Wheel: 6.00 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Dimensions: Length 2216 mm / 8732 in Width 905 mm / 35.6 in Height 1185 mm / 46.6 in at instrument panel
Seat height: 870 mm / 34.2 in
Dry Weight: 186 kg / 409 lbs
Fuel Capacity: 12 Litres / 3.17 US gal
Consumption Average: 5.3 L/100 km / 18.8 km/l / 44.2 US mpg
Standing 0 – 100 km/h: 3.9 sec
Standing 0 – 140 km/h: 7.1 sec
Standing 1/4 Mile: 12.8 sec
Acceleration 60-100 km/h: 4.5 sec
Acceleration 60-140 km/h: 9.5 sec
Acceleration 100-140 km/h: 7.1 sec
Top Speed: 202.9 km/h / 126 mph

The post Aprilia SMV 750 Dorsoduro (2010) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000R Factory (2008)

admin — Wed, 05 Apr 2023 18:24:59 +0000

The Aprilia Tuono 1000R Factory (2008) is a four-stroke motorcycle with a longitudinal 60-degree V-twin engine that has a capacity of 997.6 cc. It has a compression ratio of 11.8:1 and a cooling system that utilizes liquid. The bike features an integrated electronic engine management system with indirect multipoint electronic injection, ~57mm throttle bodies, and a digital electronic ignition with one spark plug per cylinder. The maximum power output of the bike is 102 kW at 9500 rpm, and its maximum torque is 107 Nm at 8500 rpm. The bike has a six-speed transmission with a chain final drive and a primary drive ratio of 60:31. The bike has a box section sloping twin-spar frame in aluminum alloy, and the front suspension is a ~43mm upside-down fork with adjustment for spring preload, compression and rebound damping. The bike has a 2x320mm floating disc front brake with stainless steel, 4 piston calipers, Brembo Gold, and a single ~220mm stainless steel disc rear brake with 2 piston caliper, Brembo Gold. The front wheel is 3.50 x 17″, and the rear wheel is 6.00 x 17″. With a dry weight of 181 kg, it has a fuel capacity of 18 L/4.8 US gal and a fuel reserve of 4 L/1.1 US gal. The standing 0 – 100 km/h time is 3.5 sec, and its top speed is 252.3 km/h / 156.7 mph.

Technical specifications:

Make Model: Aprilia Tuono 1000 R Factory

Year: 2008
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Exhaust: Two-into-two, Euro3
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A57 mm throttle bodies.
Ignition: Digital electronic with one spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 500W
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.8 ft-lb @ 8500 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 34:15 / 2nd 31:19 / 3rd 26:20 / 4th 24:22 / 5th 24:25 / 6th 23:26
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 40:16
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees
Trail: 103.7 mm / 4.1 in
Front Suspension: ~Ahlins Racing ~A43 mm upside-down fork with adjustment for spring preload, compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy double member swingarm. APS (Aprilia Progressive System) rising rate linkages. ~Ahlins Racing piggy-back monoshock with adjustment for spring preload, compression and rebound damping.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320mm floating discs, stainless steel, 4 piston calipers, Brembo Gold
Rear Brakes: Single ~A220 mm stainless steel disc, 2 piston caliper, Brembo Gold
Wheels: Cast aluminium alloy
Front Wheel: 3.50 x 17″
Rear Wheel: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17
Dimensions: Length: 2025 mm / 79.7 in Width: 830 mm / 32.7 in Height: 1100 mm / 43.3 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 99 mm / 3.9 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 18 L / 4.8 US gal
Fuel Reserve: 4 L / 1.1 US gal
Standing 1/4 Mile: 11.1 sec / 210.9 km/h / 131.0 mph
Standing 0 – 100 km/h: 3.5 sec
Standing 0 – 150 km/h: 5.4 sec
Standing 0 – 200 km/h: 10.0 sec
Standing 1000 m: 20.4 sec / 244.4 km/h / 151.9 mph
Acceleration 60 – 100 km/h: 4.6 sec
Acceleration 60 – 140 km/h: 9.3 sec
Acceleration 100 – 140 km/h: 4.7 sec
Acceleration 140 – 180 km/h: 6.0 sec
Top Speed: 252.3 km/h / 156.7 mp/h
Source: Motorcycle-USA

The post Aprilia Tuono 1000R Factory (2008) appeared first on MotorcycleSpecifications.com.

Aprilia SR Max 300 (2012-13)

admin — Wed, 05 Apr 2023 12:30:01 +0000

The Aprilia SR Max 300 motorcycle was produced from 2012-13 and has a four-stroke, single-cylinder, liquid-cooled engine with a capacity of 278cc. It has electronic injection and double cradle trellis in high strength steel tubing for its clutch. The maximum power is 16.4 kW / 22 hp and the maximum torque is 23 Nm / 2.3 kgf-m / 17.0 lb-ft. It has an automatic transmission with torque server and a belt as its final drive. The front suspension is A35 mm hydraulic telescopic fork and the rear suspension is a double hydraulic shock absorber with preload adjustment. It has single ~A260 mm disc front brakes and single ~A240 mm disc rear brakes. The front tire is 120/70-15 and the rear tire is 140/60-14. The seat height is 815 mm / 32.1 in and the dimensions are 2110 mm / 83.1 in in length and 780 mm / 30.7 in in width, with a wheelbase of 1515 mm / 59.6 in. Its fuel capacity is 15.5 liters / 4.1 US gal and the fuel reserve is 2.8 L / 0.7 US gal. Its average fuel consumption is 4 L/100 km / 25 km/l / 59 US mpg. The motorcycle has received positive reviews from Motorcycle News and Cars Guide.

Technical specifications:

Make Model: Aprilia SR Max 300

Year: 2012 – 13
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 278 cc / 17.0 cu in
Bore x Stroke: 75 x 63 mm
Cooling System: Liquid cooled
Lubrication: Wet sump
Induction: Electronic injection
Starting: Electric
Clutch: Double cradle trellis in high strength steel tubing
Max Power: 16.4 kW / 22 hp @ 7500 rpm
Max Torque: 23 Nm / 2.3 kgf-m / 17.0 lb-ft @ 6000 rpm
Clutch: Centrifugal dry clutch
Transmission: Automatic (CVT) with torque server
Final Drive: Belt
Front Suspension: ~A35 mm Hydraulic telescopic fork
Rear Suspension: Double hydraulic shock absorber with preload adjustment
Front Brakes: Single ~A260 mm disc
Rear Brakes: Single ~A240 mm disc
Front Tyre: 120/70-15
Rear Tyre: 140/60-14
Seat Height: 815 mm / 32.1 in
Dimensions: Length: 2110 mm / 83.1 in Width: 780 mm / 30.7 in
Wheelbase: 1515 mm / 59.6 in
Fuel Capacity: 15.5 liters / 4.1 US gal
Fuel Reserve: 2.8 L / 0.7 US gal
Average Fuel Consumption: 4 L/100 km / 25 km/l / 59 US mpg
Reviews: Motorcycle News / Cars Guide

The post Aprilia SR Max 300 (2012-13) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono V4 R (2012)

admin — Wed, 05 Apr 2023 11:26:12 +0000

The Aprilia Tuono V4 R (2012) is a four-stroke motorcycle with a longitudinal 65 degrees V four engine, DOHC, and 4 valves per cylinder. It has a capacity of 998.9 cc and a compression ratio of 13.0:1. The bike comes with a liquid cooling system, airbox with front dynamic air intakes and 4 Weber-Marelli 48mm throttle bodies with 4 injectors, and a choice of three different engine maps selectable by the rider with bike in motion. It also has an electric starting system, 6-speed transmission, and a chain final drive.

The Tuono V4 R has a maximum power of 120.8 kW (162 hp) at 11,000 rpm and a maximum torque of 110 Nm (81.1 lb-ft) at 9000 rpm. The bike has a Multiplate wet clutch with a mechanical slipper system, and the final drive ratio is 42:16. The bike has aluminum dual beam chassis with pressed and cast sheet elements, and Sachs upside-down front fork with ~A43 mm stanchions, while the rear suspension is a double-braced aluminum swingarm, mixed low thickness and sheet casting technology.

The front brakes consist of two ~A320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. It also has Brembo radial calipers with 4 horizontally opposed ~A32 mm pistons. The bike has a single ~A220 mm diameter disc for the rear brakes, Brembo floating caliper with two ~A32 mm isolated pistons. The front tire is 120/70 ZR17, and the rear tire is 190/55 ZR 17 with an option for a 190/50 ZR 17 or 200/55 ZR 17. The bike has a fuel capacity of 17 L and a fuel reserve of 4 L, with an average consumption of 7 L/100 km. The Tuono V4 R has a standing 1/4 mile of 10.8 seconds and a top speed of 269.2 km/h (167.3 mph).

Technical specifications:

Make Model: Aprilia Tuono V4 R

Year: 2012
Engine: Four stroke, longitudinal 65 degrees V four , DOHC, 4 valves per cylinder
Capacity: 998.9 cc / 60.96 cu in
Bore x Stroke: 78 x 52.3 mm
Compression Ratio: 13.0:1
Cooling System: Liquid cooled
Induction: Airbox with front dynamic air intakes. 4 Weber-Marelli ~A48 mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil” type coils Electric.
Starting: Electric
Alternator: Flywheel mounted 450W alternator with rare earth magnets
Lubrication: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Exhaust: 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter . Euro4
Max Power: 120.8 kW / 162 hp @ 11000 rpm
Max Torque: 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm
Clutch: Multiplate wet clutch with mechanical slipper system
Transmission: 6 Speed
Final Drive: Chain
Final Drive Ratio: 42:16 (2,625)
Gear Ratio: 1st: 39:15 (2.600) / 2nd: 33:16 (2.063) / 3rd: 34:20 (1.700) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222)
Steering angle: 24.5 degrees
Trail: 105 mm / 4.1 in
Frame: Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper.
Front Suspension: Sachs upside down front fork with ~A43 mm stanchions. Low profile forged aluminium caliper mountings for radial calipers. Completely adjustable spring preload and hydraulic compression and rebound damping.
Front Wheel Travel: 120 mm / 4.7 mm
Rear Suspension: Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x ~A320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial calipers with 4 horizontally opposed ~A32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses.
Rear Brakes: Single ~A220 mm diameter disc, Brembo floating caliper with two ~A32 mm isolated pistons. Pump with integrated tank and metal braided hose
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17)
Dimensions: Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height: 1090 mm / 42.9 in
Ground Clearance: 125 mm / 4.9 in
Wheelbase: 1435 mm / 56.8 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 179 kg / 395 lbs
Fuel Capacity: 17 L / 4.5 US gal
Fuel Reserve: 4 L / 1.1 US gal
Average Consumption: 7 L/100 km / 14.3 km/l / 33.6 US mpg
Standing 1/4 Mile: 10.8 sec
Top Speed: 269.2 km/h / 167.3 mph
Review: MCNews.com.au

The post Aprilia Tuono V4 R (2012) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000 R (2007)

admin — Wed, 05 Apr 2023 10:14:00 +0000

The Aprilia Tuono 1000 R motorcycle was released in 2007 with a four-stroke, longitudinal 60 degrees V twin engine and a capacity of 997.6 cc. Its compression ratio is 11.8:1, and it has a liquid cooling system and a dry sump with a separate oil reservoir. The exhaust is two-into-two, Euro3, with an integrated electronic engine management system and throttle bodies of approximately 57 mm. The ignition is digital electronic, and it has one spark plug per cylinder. The engine generates a maximum power of 102 kW/139 hp at 9500 rpm and a maximum torque of 107 Nm/10.9 kgf-m/78.8 ft-lb at 8500 rpm. The motorcycle has a six-speed transmission, a chain final drive, and multiple disk in oil bath clutch with patented PPC power-assisted hydraulic control. The Tuono 1000 R has a box section sloping twin-spar aluminium alloy frame and a rake of 25 degrees. The front suspension comprises a Showa 43 mm upside-down fork that is adjustable for spring preload, compression, and rebound damping. The front and rear brakes are made up of stainless steel discs, four-piston calipers, and Brembo Gold. The motorcycle has cast aluminium alloy wheels with a 120/70 ZR17 front tire and a 190/50 ZR17 back tire. Its dimensions are 2025 mm in length, 830 mm in width, and 1100 mm in height, with a wheelbase of 1410 mm and a weight of 181 kg dry. The Tuono 1000 R accelerates from 0 to 100 km/h in 3.5 seconds and has a top speed of 252.3 km/h.

Technical specifications:

Make Model: Aprilia Tuono 1000 R

Year: 2007
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Exhaust: Two-into-two, Euro3
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A57 mm throttle bodies.
Ignition: Digital electronic with one spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 500W
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.8 ft-lb @ 8500 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 34:15 / 2nd 31:19 / 3rd 26:20 / 4th 24:22 / 5th 24:25 / 6th 23:26
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 40:16
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees
Trail: 103.7 mm / 4.1 in
Front Suspension: Showa 43 mm upside-down fork with adjustment for spring preload, compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy double banana swingarm. APS (Aprilia Progressive System) rising rate linkages. Sachs hydraulic monoshock with adjustment for spring preload and rebound damping
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320mm floating discs, stainless steel, 4 piston calipers, Brembo Gold
Rear Brakes: Single ~A220 mm stainless steel disc, 2 piston caliper, Brembo Gold
Wheels: Cast aluminium alloy
Front Wheel: 3.50 x 17″
Rear Wheel: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17
Dimensions: Length: 2025 mm / 79.7 in Width: 830 mm / 32.7 in Height: 1100 mm / 43.3 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 99 mm / 3.9 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 18 L / 4.8 US gal
Fuel Reserve: 4 L / 1.1 US gal
Standing 1/4 Mile: 11.1 sec / 210.9 km/h / 131.0 mph
Standing 0 – 100 km/h: 3.5 sec
Standing 0 – 150 km/h: 5.4 sec
Standing 0 – 200 km/h: 10.0 sec
Standing 1000 m: 20.4 sec / 244.4 km/h / 151.9 mph
Acceleration 60 – 100 km/h: 4.6 sec
Acceleration 60 – 140 km/h: 9.3 sec
Acceleration 100 – 140 km/h: 4.7 sec
Acceleration 140 – 180 km/h: 6.0 sec
Top Speed: 252.3 km/h / 156.7 mp/h
Reviews: Moto it / Motorcycle-USA / Motorcycle.com shootout

The post Aprilia Tuono 1000 R (2007) appeared first on MotorcycleSpecifications.com.

Aprilia TXR 312M (1989)

admin — Wed, 05 Apr 2023 09:57:54 +0000

The Aprilia TXR 312M motorcycle was produced in 1989 and had a single cylinder, two stroke engine with a capacity of 277cc. It had a compression ratio of 8.5:1 and a maximum power of 7.3kW at 6400 rpm. The cooling system was liquid cooled and ignition was electronic, with kick starting. The transmission was a 6 speed with chain final drive. The front suspension was a telescopic fork and the rear suspension was a monoshock. The braking system had a single disc in the front and an expanding drum in the rear. The front and rear tyres were 2.75-21 and 4.00-18 respectively, and the wet weight of the motorcycle was 90kg. It has a fuel capacity of 4.5L and a top speed of 85 km/h.

Technical specifications:

Make Model: Aprilia TX 312M

Year: 1989
Engine: Single cylinder, two stroke
Capacity: 277cc / 16.9 cu in
Bore x Stroke: 76 x 61 mm
Compression Ratio: 8.5:1
Cooling System: Liquid cooled
Ignition: Electronic
Starting: Kick
Max Power: 7.3 kW / 10 hp @ 6400 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Monoshock
Front Brakes: ingle disc
Rear Brakes: Expanding drum
Front Tyre: 2.75-21
Rear Tyre: 4.00-18
Wet Weight: 90 kg / 198 lbs
Fuel Capacity: 4.5 L / 1.2 US gal
Top Speed: 85 km/h / 53 mph

The post Aprilia TXR 312M (1989) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000 (2003)

admin — Wed, 05 Apr 2023 07:34:56 +0000

The 2003 Aprilia Tuono 1000 is a motorcycle with a four stroke, longitudinal 60 degree V twin engine with a capacity of 997.6 cc. It has a compression ratio of 11.4:1 and a liquid-cooled cooling system. The ignition is digital electronic with two spark plugs per cylinder and the bike has an electric starting system. The motorcycle has a six-speed transmission with a chain final drive and a maximum power of 94 kW / 126 hp @ 9500 rpm. The frame is a box section sloping twin-spar frame, and the rake is 25 degrees. The front suspension is an upside-down Ohlins fork, and the rear suspension is a swing arm in aluminum alloy with a progressive linkage. Both front and rear brakes are Brembo, and the wheels are cast aluminum alloy. The fuel capacity is 18 liters, and the dry weight of the motorcycle is 181 kg / 399 lbs. Its top speed is 252.5 km/h / 156.8 mp/h. The motorcycle received positive reviews, including from Sport Rider.

Technical specifications:

Make Model: Aprilia Tuono 1000

Year: 2003
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.4:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A51 mm throttle bodies.
Ignition: Digital electronic with two spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 400W
Max Power: 94 kW / 126 hp @ 9500 rpm
Max Torque: 101 Nm / 10.3 kgf-m / 74.5 ft-lb @ 7250 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 35:14 / 2nd 28:16 / 3rd 26:19 / 4th 24:22 / 5th 22:23 / 6th 23:27
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 42:17
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees
Trail: 99 mm / 3.9 in
Front Suspension: Upside-down ~Ahlins fork, ~A43 mm diameter titanium nitride treated sleeves
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Swing arm in Aluminium alloy, progressive linkage with APS system. Boge hydraulic monoshock with adjustment for preload, compression and rebound dampening.
Rear Wheel Travel: 135 mm / 5.3 in
Front Brakes: 2 x ~A320mm floating discs, stainless steel, 4 piston calipers, Brembo
Rear Brakes: Single ~A220 mm stainless steel disc, 2 piston caliper, Brembo
Wheels: Cast aluminium alloy
Front Wheel: 3.50 x 17″
Rear Wheel: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17 (alternative: 180/55 ZR17)
Dimensions: Length: 2070 mm / 81.5 in Width: 800 mm / 31.5 in Height: 1200 mm / 47.2 in
Wheelbase: 1415 mm / 55.7 in
Seat Height: 820 mm / 32.3 in
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 18 L / 4.8 US gal
Fuel Reserve: 4 L / 1.1 US gal
Standing 1/4 Mile: 10.9 sec
Top Speed: 252.5 km/h / 156.8 mp/h
Reviews: Sport Rider

The post Aprilia Tuono 1000 (2003) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 125 2017 (2017-18)

admin — Wed, 05 Apr 2023 07:23:07 +0000

The Aprilia Tuono 125 2017-18 is a motorcycle with a four-stroke, single-cylinder, DOHC, 4 valves engine with a capacity of 124.8 cc/ 7.6 cu in. Its compression ratio is 12.5+/-0.5:1 and it uses a Magneti Marelli M3G ~A, 32mm ECU induction system. The ignition is electronic with a CDI capacity discharge and it makes use of a wet sump lubrication system. The motorcycle has a 6-speed transmission and a chain final drive with a 60/13 (4.61) gear ratio. The primary drive ratio is 69/29 (2.38). The motorcycle is equipped with a front suspension consisting of a 40mm upside-down hydraulic action telescopic fork, while the rear suspension is a cast aluminum swing-arm with asymmetrical members and thin-walled structural shell. The hydraulic monoshock comes with adjustable spring preload. The front brake has a single 320mm disc and a 4-piston caliper, while the rear brake has a single 220mm disc and a 2-piston caliper. The motorcycle has a seat height of 805 mm/31.7 in, dry weight of 122 kg/269 lbs, and fuel capacity of 14 litres/3.7 US gal. The bike has a maximum power of 11.7 kW/16 hp at 10,500 rpm, and a maximum torque of 11 Nm/1.12 kgf-m/8.1 ft/lb at 8,500 rpm. The front and rear tires are 110/70-17 and 150/60-17, respectively.

Technical specifications:

Make Model: Aprilia Touno 125

Year: 2017 – 18
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 124.8 cc / 7.6 cu in
Bore x Stroke: 58 X 47 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5 +/- 0.5:1
Lubrication: Wet sump
Induction: Magneti Marelli M3G ~A , 32mm ECU
Ignition: Electronic with CDI capacity discharge
Alternator: 13V 235W
Starting: Electric
Max Power: 11.7 kW / 16 hp @ 10500 rpm
Max Torque: 11 Nm / 1.12 kgf-m / 8.1 ft/lb @ 8500 rpm
Clutch: Multiple discs, in oil bath
Transmission: 6 Speed
Final Drive: Chain: 60/13 (4.61)
Gear Ratio: 1st 11/33 (0.33) 2nd 15/30 (0.50) 3rd 18/27 (0.67) 4th 20/24 (0.83) 5th 25/27 (0.92) 6th 23/22 (1.05)
Primary Drive: 69/29 (2.38)
Frame: Aluminum perimeter frame
Front Suspension: ~A40 mm Upside-down hydraulic action telescopic fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Cast Aluminium swing-arm with asymmetrical members and thin walled structural shell. Hydraulic monoshock with adjustable spring preload
Rear Wheel travel: 120 mm / 4.7 in
Front Brakes: Single ~A320 mm disc, 4 piston caliper
Rear Brakes: Single ~A220 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Seat height: 805 mm / 31.7 in
Dry Weight: 122 kg / 269 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Aprilia Tuono 125 2017 (2017-18) appeared first on MotorcycleSpecifications.com.

Aprilia Tuareg 125 Wind (1988-89)

admin — Wed, 05 Apr 2023 05:01:55 +0000

The Aprilia Tuareg 125 Wind is a two-stroke, single-cylinder motorcycle with a capacity of 124cc. It was manufactured from 1988 to 1989 and had a liquid-cooled engine with a compression ratio of 15.5:1. The bike has a kick-start and can reach a maximum power of 18.6 kW or 25 hp at 9000 rpm. It has a six-speed transmission and a chain final drive. The bike has a telescopic fork front suspension and a mono-shock rear suspension. The front brake is a single disc and the rear brake is a drum. It has a wet weight of 120kg or 265lbs, fuel capacity of 18 litres or 7.6 US gall, can reach a top speed of 130km/h or 81mph and has front and rear tires of 2.75-21 and 4.60-17 respectively. The Aprilia Tuareg 125 Wind was tested in Moto Sprint 1989 Group Test.

Technical specifications:

Make Model: Aprilia Tuareg 125 Wind

Year: 1988 – 89
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 15.5:1
Cooling System: Liquid cooled
Starting: Kick
Max Power: 18.6 kW / 25 hp @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Mono shock
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Wet Weight: 120 kg / 265 lbs
Fuel Capacity: 18 Litres / 7.6 US gal
Top Speed: 130 km/h / 81 mph
Road Tests: Moto Sprint 1989 Group Test

The post Aprilia Tuareg 125 Wind (1988-89) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000 R (2010)

admin — Wed, 05 Apr 2023 03:19:20 +0000

The Aprilia Tuono 1000 R motorcycle was manufactured in 2010 and comes equipped with a four-stroke, longitudinal 60-degree V twin engine. The engine has a capacity of 997.6 cc/60.9 cu in, a compression ratio of 11.8:1, and it is cooled by a liquid cooling system. The bike has a 6-speed transmission, a chain final drive, and multiple disk clutch in oil bath with patented PPC power-assisted hydraulic control. The motorcycle has a maximum power of 102 kW/139 hp at 9500 rpm and a maximum torque of 107 Nm/10.9 kgf-m/78.8 ft-lb at 8500 rpm. The bike features a box section sloping twin-spar frame in aluminum alloy and removable aluminum alloy saddle mount frame. It also has a Showa 43 mm upside-down fork suspension at the front and an aluminum alloy double banana swingarm suspension at the rear. The brakes come with Brembo Gold, with the front featuring 2 x A320mm floating discs, stainless steel, and 4 piston calipers. The Aprilia Tuono 1000 R has a standing 1/4 mile time of 11.1 seconds/210.9 km/h/131.0 mph and a top speed of 252.3 km/h/156.7 mp/h. Reviews for the bike can be found on Moto it, Motorcycle-USA, and Motorcycle.com shootout.

Technical specifications:

Make Model: Aprilia Tuono 1000 R

Year: 2010
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Exhaust: Two-into-two, Euro3
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A57 mm throttle bodies.
Ignition: Digital electronic with one spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 500W
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.8 ft-lb @ 8500 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 34:15 / 2nd 31:19 / 3rd 26:20 / 4th 24:22 / 5th 24:25 / 6th 23:26
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 40:16
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees
Trail: 103.7 mm / 4.1 in
Front Suspension: Showa 43 mm upside-down fork with adjustment for spring preload, compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy double banana swingarm. APS (Aprilia Progressive System) rising rate linkages. Sachs hydraulic monoshock with adjustment for spring preload and rebound damping
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320mm floating discs, stainless steel, 4 piston calipers, Brembo Gold
Rear Brakes: Single ~A220 mm stainless steel disc, 2 piston caliper, Brembo Gold
Wheels: Cast aluminium alloy
Front Wheel: 3.50 x 17″
Rear Wheel: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17
Dimensions: Length: 2025 mm / 79.7 in Width: 830 mm / 32.7 in Height: 1100 mm / 43.3 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 99 mm / 3.9 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 18 L / 4.8 US gal
Fuel Reserve: 4 L / 1.1 US gal
Standing 1/4 Mile: 11.1 sec / 210.9 km/h / 131.0 mph
Standing 0 – 100 km/h: 3.5 sec
Standing 0 – 150 km/h: 5.4 sec
Standing 0 – 200 km/h: 10.0 sec
Standing 1000 m: 20.4 sec / 244.4 km/h / 151.9 mph
Acceleration 60 – 100 km/h: 4.6 sec
Acceleration 60 – 140 km/h: 9.3 sec
Acceleration 100 – 140 km/h: 4.7 sec
Acceleration 140 – 180 km/h: 6.0 sec
Top Speed: 252.3 km/h / 156.7 mp/h
Reviews: Moto it / Motorcycle-USA / Motorcycle.com shootout

The post Aprilia Tuono 1000 R (2010) appeared first on MotorcycleSpecifications.com.

Aprilia SXV 450 (2008-09)

admin — Tue, 04 Apr 2023 23:14:59 +0000

The Aprilia SXV 450 from 2008-09 is a four-stroke motorcycle that features a 77-degree V-twin, SOHC engine of 449cc/27.4 cu in. The bike has a compression ratio of 12.5:1 and a liquid cooling system, and the lubrication system is made up of a dry sump with an external oil tank, plus separate gearbox lubrication. The engine management system controls both ignition and fuel injection with an integrated throttle body of around 38mm. The bike’s clutch is cable-operated, multi-plate, and wet, and it has an electric starting system. The motorcycle can reach a maximum power of 44.7 kW/60 hp at 13,000 rpm thanks to a 5-speed transmission and chain final drive. The bike’s steel perimeter frame includes alloy vertical members while the suspension consists of an ~A48mm upside-down fork and a box-section aluminum swingarm with a cast body, adjustable hydraulic monoshock. Braking is taken care of by single ~320mm discs with a 4-piston caliper on the front and a single ~240mm disc with a 2-piston caliper on the rear. The bike rides on a 120/70-17 front tire and a 180/55-17 rear tire.

Technical specifications:

Make Model: Aprilia SXV 450

Year: 2008 – 09
Engine: Four stroke, 77 degrees V-twin, SOHC
Capacity: 449 cc / 27.4 cu in
Bore x Stroke: 76 X 49.5 mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Lubrication System: Dry sump with external oil tank. Separate gearbox lubrication.
Induction: Integrated engine management system controlling ignition and fuel injection. Throttle body: ~A38 mm
Ignition: Electronic
Starting: Electric
Clutch: Cable operated multi-plate wet clutch.
Max Power: 44.7 kW / 60 hp @ 13000 rpm
Transmission: 5 Speed
Final Drive: Chain
Gear Ratio: 1st 13:30 / 2nd 15:27 / 3rd 16:23 / 4th 20:23 / 5th 21:21
Frame: Steel perimeter frame with alloy vertical members
Front Suspension: ~A48 mm Upside down fork, double adjustment.
Rear Suspension: Box section aluminium swingarm with cast body, hydraulic monoshock with compression and rebound adjustment
Front Brakes: Single ~A320mm disc, 4 piston caliper
Rear Brakes: Single ~A240mm disc, 2 piston caliper
Front Tyre: 120/70 -17
Rear Tyre: 180/55 -17

The post Aprilia SXV 450 (2008-09) appeared first on MotorcycleSpecifications.com.

Aprilia ST 125 (1982-84)

admin — Tue, 04 Apr 2023 22:34:55 +0000

The Aprilia ST 125 was a motorcycle produced from 1982 to 1984. It was powered by a two-stroke, single cylinder engine with a capacity of 124cc and a compression ratio of 14.5:1. The bike had a liquid cooling system and used an A28 mm Dell’Orto PHBH AS carburettor for induction. It had electronic ignition and a 12V 5.5 Ah battery with a generator that provided 130W of power. The bike used a kick start and a multi-disc oil bath clutch. It delivered a maximum power of 13.8 Nm / 18.5 hp @ 8250 rpm and had a six-speed transmission and chain final drive. The frame was a double cradle tubular steel design, and the suspension comprised a non-adjustable ~A32mm Marzocchi fork at the front and a swingarm with single shock absorber at the rear. The bike featured a single ~A230 mm disc brake at the front and a ~A160mm drum brake at the rear. It had a front wheel size of 2.75-18 and a rear wheel size of 3.00-18.

Technical specifications:

Make Model: Aprilia ST 125

Year: 1982 – 84
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 52.8 mm x 57mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: ~A28 mm Dell’Orto PHBH AS
Ignition: Electronic
Battery: 12V 5.5 Ah
Generator: 130W
Starting: Kick
Clutch: Multi-disc oil bath
Max Power: 13.8 Nm / 18.5 hp @ 8250 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Double cradle tubular steel
Front Suspension: Marzocchi ~A32mm fork. non-adjustable
Rear Suspension: Swingarm with single shock absorber
Front Brakes: Single ~A230 mm disc
Rear Brakes: ~A160mm drum
Front Wheel: 2.75-18
Rear Wheel: 3.00-18

The post Aprilia ST 125 (1982-84) appeared first on MotorcycleSpecifications.com.

Aprilia Tuareg 125 (1984)

admin — Tue, 04 Apr 2023 20:51:13 +0000

In 1984, Aprilia released the Tuareg 125, a two stroke, single cylinder motorcycle with a liquid cooled engine and a capacity of 124 cc. With a compression ratio of 15.5:1 and a maximum power of 18.6 kW/25 hp at 9000 RPM, this bike had a six speed transmission and a final chain drive. The front suspension was a telescopic fork, and the rear suspension was a mono shock. The front brakes consisted of a single disc, while the rear brakes were drum. The front and rear tires were 2.75-21 and 4.60-17, respectively. The Aprilia Tuareg 125 weighed 120 kg/265 lbs and had a fuel capacity of 18 litres/7.6 US gallons.

Technical specifications:

Make Model: Aprilia Tuareg 125

Year: 1984
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 15.5:1
Cooling System: Liquid cooled
Starting: Kick
Max Power: 18.6 kW / 25 hp @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Mono shock
Front Brakes: Single disc
Rear Brakes: Drum
Front Tyre: 2.75-21
Rear Tyre: 4.60-17
Wet Weight: 120 kg / 265 lbs
Fuel Capacity: 18 Litres / 7.6 US gal

The post Aprilia Tuareg 125 (1984) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono 1000R Factory (2006)

admin — Tue, 04 Apr 2023 20:03:04 +0000

The 2006 Aprilia Tuono 1000 R Factory motorcycle has a four-stroke, longitudinal 60 degree V-twin engine with an engine capacity of 997.6cc. It has a compression ratio of 11.8:1 and a liquid cooling system. The ignition is digital electronic with one spark plug per cylinder, and it has an electric starter with a 12V-500W generator. The maximum power is 102 kW or 139 hp at 9500 rpm, and the maximum torque is 107 Nm or 78.8 ft-lb at 8500 rpm. The transmission is six-speed, with a chain final drive ratio of 40:16. It has a box-section sloping twin-spar frame in an aluminium alloy with a rake of 25 degrees and a trail of 103.7 mm. The suspension system has a front upside-down fork with adjustment for spring preload, compression, and rebound damping, and the rear has an aluminium alloy double member swingarm with APS rising rate linkages. It has a front braking system with 2 x 320mm floating discs, stainless steel, 4-piston calipers, and Brembo Gold, and a rear braking system with a single 220mm stainless steel disc, 2-piston caliper, and Brembo Gold. The standing quarter-mile is 11.1 seconds at 210.9 km/h or 131.0 mph, and the top speed is 252.3 km/h or 156.7 mph. It weighs 181kg or 399 lbs with a fuel capacity of 18L or 4.8 US gallons and has a height of 1100mm, width of 830mm, and length of 2025mm.

Technical specifications:

Make Model: Aprilia Tuono 1000 R Factory

Year: 2006
Engine: Four stroke, longitudinal 60 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5mm
Compression Ratio: 11.8:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir. Double trochoidal pump with oil cooler.
Exhaust: Two-into-two, Euro3
Induction: Integrated electronic engine management system. Indirect multipoint electronic injection, ~A57 mm throttle bodies.
Ignition: Digital electronic with one spark plugs per cylinder. Ignition timing integrated in the injection control system.
Starting: Electric
Generator: 12V – 500W
Max Power: 102 kW / 139 hp @ 9500 rpm
Max Torque: 107 Nm / 10.9 kgf-m / 78.8 ft-lb @ 8500 rpm
Transmission: 6 Speed
Gear Ratios: 1sr 34:15 / 2nd 31:19 / 3rd 26:20 / 4th 24:22 / 5th 24:25 / 6th 23:26
Final Drive: Chain
Primary Drive Ratio: 60:31
Final Drive Ratio: 40:16
Clutch: Multiple disk in oil bath with patented PPC power-assisted hydraulic control
Frame: Box section sloping twin-spar frame in aluminium alloy. Removable aluminium alloy saddle mount frame.
Rake: 25 degrees
Trail: 103.7 mm / 4.1 in
Front Suspension: ~Ahlins Racing ~A43 mm upside-down fork with adjustment for spring preload, compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy double member swingarm. APS (Aprilia Progressive System) rising rate linkages. ~Ahlins Racing piggy-back monoshock with adjustment for spring preload, compression and rebound damping.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320mm floating discs, stainless steel, 4 piston calipers, Brembo Gold
Rear Brakes: Single ~A220 mm stainless steel disc, 2 piston caliper, Brembo Gold
Wheels: Cast aluminium alloy
Front Wheel: 3.50 x 17″
Rear Wheel: 6.00 x 17″
Front Tyre: 120/70 ZR17
Rear Tyre: 190/50 ZR17
Dimensions: Length: 2025 mm / 79.7 in Width: 830 mm / 32.7 in Height: 1100 mm / 43.3 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 99 mm / 3.9 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 181 kg / 399 lbs
Fuel Capacity: 18 L / 4.8 US gal
Fuel Reserve: 4 L / 1.1 US gal
Standing 1/4 Mile: 11.1 sec / 210.9 km/h / 131.0 mph
Standing 0 – 100 km/h: 3.5 sec
Standing 0 – 150 km/h: 5.4 sec
Standing 0 – 200 km/h: 10.0 sec
Standing 1000 m: 20.4 sec / 244.4 km/h / 151.9 mph
Acceleration 60 – 100 km/h: 4.6 sec
Acceleration 60 – 140 km/h: 9.3 sec
Acceleration 100 – 140 km/h: 4.7 sec
Acceleration 140 – 180 km/h: 6.0 sec
Top Speed: 252.3 km/h / 156.7 mp/h

The post Aprilia Tuono 1000R Factory (2006) appeared first on MotorcycleSpecifications.com.

Aprilia STX 125 (1985)

admin — Tue, 04 Apr 2023 18:22:56 +0000

The Aprilia STX 125 is a two stroke, single cylinder motorcycle produced in 1985. It has a 124cc engine with a compression ratio of 14.5:1 and a maximum power of 15.7 kW / 21hp at 8000 rpm. It features a liquid cooled system, 26 Dell’Orto PHBH AS induction, and electronic ignition. The motorcycle has a six speed transmission and a chain final drive. The frame is a double cradle tubular steel with a 26.5 degree rake and an 86mm trail. Front suspension is non-adjustable Marzocchi ~A32 mm and the rear suspension is a swingarm with a single shock absorber. Braking is provided by a single ~A240 mm front disc and a single ~A230 mm rear disc, with 100-90 -16 front and 100-90 -18 rear tyres. The seat height is 800mm / 31.5in and the dry weight is 104 kg / 229 lbs. The top speed for this motorcycle is 135 km/h / 83.9 mph.

Technical specifications:

Make Model: Aprilia STX 125

Year: 1985
Engine: Two stroke, single cylinder
Capacity: 124cc / 7.6 cu in
Bore x Stroke: 52.8 mm x 57mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: 26 Dell’Orto PHBH AS
Ignition: Electronic
Starting: Kick
Clutch: Multi-disc oil bath
Max Power: 15.7 kW / 21hp @ 8000 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Double cradle tubular steel
Rake: 26.5 degrees
Trail: 86 mm / 3.4 in
Front Suspension: Marzocchi ~A32 mm, non-adjustable
Rear Suspension: Swingarm with single shock absorber
Front Brakes: Single ~A240 mm disc
Rear Brakes: Single ~A230 mm disc
Front Tyre: 100-90 -16
Rear Tyre: 100-90 -18
Seat Height: 800 mm / 31.5in
Dry Weight: 104 kg / 229 lbs
Top Speed: 135 km/h / 83.9 mph

The post Aprilia STX 125 (1985) appeared first on MotorcycleSpecifications.com.

Aprilia Scarabeo 500 (2006-12)

admin — Tue, 04 Apr 2023 18:11:01 +0000

The Aprilia Scarabeo 500 motorcycle was produced from 2006 to 2012. It features a four-stroke, single-cylinder, SOHC engine with a capacity of 460 cc and a compression ratio of 10.5:1. The engine is liquid-cooled and lubricated with wet sump, forced circulation using a mechanical pump, and semi-synthetic oil. It has a Keihin carburetor and an NGK CR7EKB spark plug, with electronic ignition and electric starting. At its peak, the engine can produce 29 kW or 39 hp of power at 7500 rpm and 43 Nm or 31.2 lb-ft of torque at 5500 rpm. The clutch is automatic and centrifugal, and the transmission is automatic with continuous variator. The final drive is a belt. The front suspension consists of a hydraulic fork, sleeve around 40 mm, with 103 mm or 4.0 in of wheel travel. The rear suspension features the engine as a swinging fork swingarm, connected by dual connecting rods and two radial silent blocks, with two double-action gas shock absorbers with preload adjustment and 100 mm or 3.9 in of wheel travel. The front brakes are twin discs around 260 mm with 2-piston calipers.

Technical specifications:

Make Model: Aprilia Scarabeo 500

Year: 2006 – 12
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 460 cc / 28.1 cu in
Bore x Stroke: 92 x 69 mm
Compression Ratio: 10.5:1
Cooling System: Liquid cooled
Lubrication: Wet sump, forced circulation with mechanical pump
Engine Oil: Semi-synthetic, 5W/40
Induction: Keihin carburetor
Spark Plug: NGK CR7EKB
Ignition: Electronic
Starting: Electric
Max Power: 29 kW / 39 hp @ 7500 rpm
Max Torque: 43 Nm / 4.8 kgf-m / 31.2 lb-ft @ 5500 rpm
Clutch: Automatic, centrifugal
Transmission: Automatic with continuous variator
Final Drive: Belt
Front Suspension: Hydraulic fork, sleeve ~A40 mm.
Front Wheel Travel: 103 mm / 4.0 in
Rear Suspension: Engine functions as swinging fork swingarm, linked to the frame by dual connecting rods and two radial silent blocks. Two double-action gas shock absorbers with preload adjustment.
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2 x ~A260 mm discs, 2 piston calipers

The post Aprilia Scarabeo 500 (2006-12) appeared first on MotorcycleSpecifications.com.

Aprilia Tuono V4 R (2011)

admin — Tue, 04 Apr 2023 17:25:07 +0000

The Aprilia Tuono V4 R (2011) is a four-stroke, longitudinal 65-degree V-four motorcycle with a capacity of 998.9 cc. The bike has an airbox with front dynamic air intakes, and four Weber-Marelli A48 mm throttle bodies with four injectors and the latest generation Ride-by-Wire engine management. It has a choice of three different engine maps selectable by the rider with the bike in motion: T (Track), S (Sport), R (Road). The ignition is a Magneti Marelli digital electronic ignition system integrated into the engine control system, with one spark plug per cylinder and “stick-coil” type coils electric. The motorcycle has a multi-plate wet clutch with a mechanical slipper system, and a six-speed transmission with a final drive ratio of 42:16. It has a front suspension Sachs upside-down fork with ~A43 mm stanchions and completely adjustable spring preload and hydraulic compression and rebound damping. The rear suspension is a double braced aluminum swingarm with a Sachs piggyback monoshock, completely adjustable spring preload and hydraulic compression and rebound damping, and APS progressive linkage. The front brakes consist of two ~A320 mm floating stainless steel discs with lightweight stainless steel rotor with six studs, Brembo radial calipers with four horizontally opposed ~A32 mm pistons, sintered pads, axial pump master cylinder and metal braided brake hoses, while the rear brakes have a single ~A220 mm diameter disc, Brembo floating caliper with two ~A32 mm isolated pistons, pump with integrated tank and metal braided hose. The motorcycle has a dry weight of 179 kg and a fuel capacity of 17 L. It has a top speed of 269.2 km/h and received positive reviews on MCNews.com.au.

Technical specifications:

Make Model: Aprilia Tuono V4 R

Year: 2011
Engine: Four stroke, longitudinal 65 degrees V four , DOHC, 4 valves per cylinder
Capacity: 998.9 cc / 60.96 cu in
Bore x Stroke: 78 x 52.3 mm
Compression Ratio: 13.0:1
Cooling System: Liquid cooled
Induction: Airbox with front dynamic air intakes. 4 Weber-Marelli ~A48 mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil” type coils Electric.
Starting: Electric
Alternator: Flywheel mounted 450W alternator with rare earth magnets
Lubrication: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Exhaust: 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter . Euro4
Max Power: 120.8 kW / 162 hp @ 11000 rpm
Max Torque: 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm
Clutch: Multiplate wet clutch with mechanical slipper system
Transmission: 6 Speed
Final Drive: Chain
Final Drive Ratio: 42:16 (2,625)
Gear Ratio: 1st: 39:15 (2.600) / 2nd: 33:16 (2.063) / 3rd: 34:20 (1.700) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222)
Steering angle: 24.5 degrees
Trail: 105 mm / 4.1 in
Frame: Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper.
Front Suspension: Sachs upside down front fork with ~A43 mm stanchions. Low profile forged aluminium caliper mountings for radial calipers. Completely adjustable spring preload and hydraulic compression and rebound damping.
Front Wheel Travel: 120 mm / 4.7 mm
Rear Suspension: Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x ~A320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial calipers with 4 horizontally opposed ~A32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses.
Rear Brakes: Single ~A220 mm diameter disc, Brembo floating caliper with two ~A32 mm isolated pistons. Pump with integrated tank and metal braided hose
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17)
Dimensions: Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height: 1090 mm / 42.9 in
Ground Clearance: 125 mm / 4.9 in
Wheelbase: 1435 mm / 56.8 in
Seat Height: 840 mm / 33.1 in
Dry Weight: 179 kg / 395 lbs
Fuel Capacity: 17 L / 4.5 US gal
Fuel Reserve: 4 L / 1.1 US gal
Average Consumption: 7 L/100 km / 14.3 km/l / 33.6 US mpg
Standing 1/4 Mile: 10.8 sec
Top Speed: 269.2 km/h / 167.3 mph
Review: MCNews.com.au

The post Aprilia Tuono V4 R (2011) appeared first on MotorcycleSpecifications.com.

Aprilia RS4 125 (2016)

admin — Tue, 04 Apr 2023 14:10:04 +0000

The Aprilia RS4 125 (2016) is a sports motorcycle featuring a Liquid cooled, Four stroke, single cylinder, DOHC, 4 valves engine with a displacement of 124.8 cc. It has a Magneti Marelli MIU G3 Electronic control unit and electronic ignition with CDI capacity discharge. The Emission Standard is Euro 3, and it has a Clutch with Multiple discs in oil bath. The transmission is 6 Speed with the Final Drive being a chain. The Frame is made of Aluminum perimeter frame. The Front Suspension is a ~A41 mm Upside down fork, and the Rear Suspension is Asymmetric swingarm with monoshock. The Front Brakes feature a Single ~A300 mm disc with a 4 piston caliper and the Rear Brakes are Single ~A218 mm disc with 1 piston caliper. The motorcycle has a length of 1953 mm, width of 740 mm, and height of 1138 mm. The Wheelbase of the motorcycle is 1350 mm, and the Seat Height is 820 mm. The Wet Weight of the motorcycle is 120 kg, and the Fuel Capacity is 14.5 Liters. The motorcycle has a maximum power of 11.7 kW / 16 hp and maximum torque of 11 Nm / 1.12 kgf-m / 8.1 ft/lb at 10500 rpm and 8500 rpm respectively. The Front and Rear Tyres are 110/80 17 and 130/70 17 respectively, and it has a Front Wheel Travel of 110 mm and Rear Wheel Travel of 130 mm.

Technical specifications:

Make Model: Aprilia RS4 125

Year: 2016
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 124.8 cc / 7.6 cu in
Bore x Stroke: 58 X 47 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5 +/- 0.5:1
Induction: Electronic injection
ECU: Magneti Marelli MIU G3, ~A32 mm
Ignition: Electronic with CDI capacity discharge
Emission Standard: Euro 3
Starting: Electric
Max Power: 11.7 kW / 16 hp @ 10500 rpm
Max Torque: 11 Nm / 1.12 kgf-m / 8.1 ft/lb @ 8500 rpm
Clutch: Multiple discs, in oil bath
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 11/33 (0.33) / 2nd 15/30 (0.50) / 3rd 18/27 (0.67) / 4th 20/24 (0.83) / 5th 25/27 (0.92) / 6th 23/22 (1.05)
Frame: Aluminum perimeter frame
Front Suspension: ~A41 mm Upside down fork
Front Wheel Travel: 110 mm / 4.3 in
Rear Suspension: Asymmetric swingarm with monoshock
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: Single ~A300 mm disc, 4 piston caliper
Rear Brakes: Single ~A218 mm disc, 1 piston caliper
Front Tyre: 110/80 17
Rear Tyre: 130/70 17
Dimensions: Length: 1953 mm / 76.8 in Width: 740 mm / 29.1 in Height: 1138 mm / 44.6 in
Wheelbase: 1350 mm / 53.1 in
Seat Height: 820 mm / 32.3 in
Wet Weight: 120 kg / 264.6 lbs
Fuel Capacity: 14.5 Liters / 3.8 US gal

The post Aprilia RS4 125 (2016) appeared first on MotorcycleSpecifications.com.

Aprilia Pegaso 650 (1997-98)

admin — Tue, 04 Apr 2023 13:23:04 +0000

The Aprilia Pegaso 650 is a motorcycle produced in 1997-98. It is powered by a four-stroke, single-cylinder, DOHC engine with a capacity of 652cc. The bore x stroke measure 100 x 83 mm, while the compression ratio is 9.1:1. The liquid-cooled motorcycle has an induction of 2 x ~A32mm Mikuni BST33 and an electric starting system. The max power output is 36.4 kW / 50 hp @ 7000 rpm, while the max torque is 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm. The transmission is a five-speed system, and the final drive is through a chain. Its front suspension is ~A45 mm upside-down forks, and its rear suspension is a varying section high-strength steel swing-arm with Aprilia Progressive System (APS) rising rate linkage. The motorcycle has a single ~A300 mm disc and a 2-piston caliper for its front brakes, while it has a single ~A220 mm disc and a 1-piston caliper at the rear. The front and rear tires have sizes of 100/90-19 and 130/80-17, respectively. The motorcycle weighs 160 kg/352 lbs (dry) and 175kg/385 lbs (wet), with a fuel capacity of 21L / 5.5 US gal.

Technical specifications:

Make Model: Aprilia Pegaso 650

Year: 1997 – 98
Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dry Weight: 160 kg / 352 lbs
Wet Weight: 175 kg / 385 lbs
Fuel Capacity: 21 L / 5.5 US gal

The post Aprilia Pegaso 650 (1997-98) appeared first on MotorcycleSpecifications.com.

Aprilia RSV4 RR (2018)

admin — Tue, 04 Apr 2023 11:21:13 +0000

The Aprilia RSV-4 RR (2018) motorcycle has a four-stroke, 65-degree V-four engine with DOHC and four valves per cylinder. The engine has a capacity of 999.6 cc and a compression ratio of 13.6:1. The bike has an airbox with front dynamic air intakes, four Marelli 48-mm throttle bodies with eight injectors, and the latest generation Ride-By-Wire engine management allowing the rider to choose among three different engine maps. The ignition system is a Magneti Marelli digital electronic ignition with one spark plug per cylinder and stick-coil-type coils. The bike has a 6-speed gearbox cassette type transmission, a chain final drive, and a wet sump lubrication system with oil radiator and two oil pumps. The maximum power of the bike is 148 kW / 201 hp at 13000 rpm, and the maximum torque is 115 Nm / 11.9 kgf-m / 86.2 lb-ft at 10500 rpm. The bike also features a dual aluminium beam chassis, Sachs upside-down fork front suspension, twin-sided aluminium swingarm rear suspension, and a Brembo monobloc radial calipers braking system. The weight of the bike is 204 kg / 450 lbs and has a fuel capacity of 18.5 liters / 4.9 US gal.

Technical specifications:

Make Model: Aprilia RSV-4 RR

Year: 2018
Engine: Four stroke, longitudinal 65 degrees V four , DOHC, 4 valves per cylinder
Capacity: 999.6 cc / 61.0 cu-in
Bore x Stroke: 78 x 52.3 mm
Cooling System: Liquid cooled
Compression Ratio: 13.6:1
Induction: Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-By-Wire engine management.Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Race)
Ignition: Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and stick-coil -type coils
Starting: Electric
Exhaust: 4 into 2 into 1 layout, two oxygen sensors, lateral single silencer with ECU-controlled bypass valve and integrated trivalent catalytic converter (Euro 4) Alternator Flywheel mounted 450 W alternator with rare earth magnets
Alternator: Flywheel mounted 420W alternator with rare earth magnets
Lubrication: Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Max Power: 148 kW / 201 hp @ 13000 rpm
Max Torque: 115 Nm / 11.9 kgf-m / 86.2 lb-ft @ 10500 rpm
Clutch: Multi-disc oil bath with mechanical slipper system
Transmission: 6 Speed gearbox cassette type
Final Drive: Chain
Gear Ratio: 1st: 39/15 (2.600) 2nd: 33/16 (2.063) 3rd: 34/20 (1.700) 4th: 31/21 (1.476) 5th: 31/23 (1.348) 6th: 34/27 (1.259)
Primary drive: Straight cut gears and integrated flexible coupling, drive ratio: 73:44 (1,659)
Secondary drive: Secondary drive Chain: Drive ratio: 42:16 (2.625)
Frame: Dual aluminium beam chassis with pressed and cast sheet elements
Front Suspension: Sachs upside-down fork, 43-mm stanchions (with Tin surface treatment). Low profile forged aluminium radial caliper mounting bracket. Adjustable spring preload, hydraulic compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Twin sided aluminium swingarm; mixed low thickness and sheet casting technology. Sachs monoshock adjustable: spring preload, wheelbase and hydraulic compression and rebound damping. APS progressive linkages.
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2 x ~A320 mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial calipers with 4 x ~A30 mm opposing. Sintered pads. Radial pump and metal braided brake hose
Rear Brakes: Single ~A220 mm diameter disc, Brembo floating caliper with two ~A32 mm isolated pistons. Pump with integrated tank and metal braided hose
Front Wheel: 3.5 x 17
Rear Wheel: 6.0 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR17)
Steering Angle: 24.5 degrees
Trail: 105 mm / 4.1 in
Dimensions: Length: 2040 mm / 80.3 in Width: 735 mm / 28.9 in (at the handlebar) Height: 1120 mm / 44.0 in
Ground Clearance: 130 mm / 5.1 in
Seat Height: 845 mm / 33.2 in
Dry Weight: 182 kg / 401 lbs
Wet Weight: 204 kg / 450 lbs
Fuel Capacity: 18.5 Liters / 4.9 US gal
Fuel Reserve: 4 Liters / 1.1 US gal

The post Aprilia RSV4 RR (2018) appeared first on MotorcycleSpecifications.com.

Aprilia Scarabeo 50 (2007)

admin — Tue, 04 Apr 2023 10:35:15 +0000

The Aprilia Scarabeo 50 is a motorcycle model from 2007, equipped with a single cylinder, four-stroke engine, with a capacity of 49.9 cc. The compression ratio ranges between 11.5-12:1, and the induction includes a Keihin carburetor. The motorcycle features an electronic ignition and an automatic, centrifugal clutch. It has air-cooled automatic variator transmission and a v-belt final drive. The frame consists of a single spar with double cradle, high strength steel. The motorcycle has hydraulic suspension – both front and rear, with a 80mm/3.1in wheel travel. The front brake is a single, stainless steel disc, with two opposed piston caliper, while the rear brake is a drum. It has a fuel capacity of 8 L/2.1 US gal and an average consumption of 2.3 L/100 km / 43 km/l/101 US mpg. It has light alloy, 5 spoke wheels, with the front rim measuring 1.60 x 16 and the rear rim at 1.85 x 16. Its length measures 1905 mm/75 inches, width 705mm/27.8 inches, and height at 1270 mm/50 inches, with a 1256 mm/49.4 inch wheelbase and a seat height of 780 mm/30.7 inches. It is equipped with an electric and kick-start option, making it easy to handle.

Technical specifications:

Make Model: Aprilia Scarabeo 50

Year: 2007
Engine: Horisontal, single cylinder, four stroke, OHC
Capacity: 49.9 cc / 3.0 cu in
Bore x Stroke: 39 x 41.8 mm
Cooling System: Forced air cooled
Compression Ratio: 11.5 – 12:1
Lubrication: Forced wet sump with orbital pump
Induction: Keihin carburetor, ~A20 mm
Ignition: Electronic
Alternator: Permanent magnet, 12V – 120W
Starting: Electric and kick
Clutch: Automatic, centrifugal
Transmission: Air cooled automatic variator
Final Drive: V-belt
Frame: Single spar with double cradle, high strength steel
Front Suspension: Hydraulic fork
Front Wheel Travel: 80 mm / 3.1 in
Rear Suspension: Hydraulic monoshock
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single stainless steel disc, ~A220 mm, two opposed piston caliper, 30 mm
Rear Brakes: Drum, ~A140 mm
Wheels: Light alloy, 5 spoke
Front Rim: 1.60 x 16
Rear Rim: 1.85 x 16
Dimensions: Length: 1905 mm / 75.0 in Width: 705 mm / 27.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1256 mm / 49.4 in
Seat Height: 780 mm / 30.7 in
Fuel Capacity: 8 L / 2.1 US gal
Reserve: 1 L / 0.26 US gal
Average Consumption: 2.3 L/100 km / 43 km/l / 101 US mpg

The post Aprilia Scarabeo 50 (2007) appeared first on MotorcycleSpecifications.com.

Aprilia ETV 1000 Caponord (2004)

admin — Tue, 04 Apr 2023 10:23:02 +0000

The Aprilia ETV 1000 Caponord is a motorcycle model from 2004. It has a four-stroke, longitudinal 60-degree V-twin engine with DOHC and four valves per cylinder. The engine capacity is 997.6cc, and the bore x stroke is 97 x 67.5 mm. The motorcycle has a liquid cooling system and a compression ratio of 10.4:1. The lubrication is wet sump, and the engine oil used is synthetic, with a 15-50 viscosity. The induction is fuel injection, and the ignition is digital electronic with two spark plugs per cylinder. The spark plugs used are NGK R-DCPR9E, and the starting system is electric. It has a maximum power output of 72 kW or 98 hp at 8250 rpm and a maximum torque of 97 Nm, 9.88 kgf-m, or 71.5 bl-ft at 6250 rpm. The clutch is wet, and the transmission is six-speed. The final drive is a chain. The frame is wave twin beam in box-type aluminum-magnesium alloy with a highly-resistant removable steel rear subframe. The front suspension is a Marzocchi hydraulic fork, approximately 50 mm, and the front wheel travel is 175mm or 6.9 inches. The rear suspension is an aluminum alloy swing arm with a progressive linkage. The Sachs hydraulic shock absorber is rebound and preload adjustable, and the rear wheel travel is 185mm or 7.3 inches.

Technical specifications:

Make Model: Aprilia ETV 1000 Caponord

Year: 2004
Engine: Four stroke, longitudinal 60 degrees V-twin, DOHC, 4 valves per cylinder
Capacity: 997.6 cc / 60.9 cu in
Bore x Stroke: 97 x 67.5 mm
Cooling System: Liquid cooled
Compression Ratio: 10.4:1
Lubrication: Wet sump
Engine Oil: Synthetic, 15-50
Induction: Fuel injection
Ignition: Digital electronic, two spark plugs per cylinder
Spark Plug: NGK R-DCPR9E
Starting: Electric
Max Power: 72 kW / 98 hp @ 8250 rpm
Max Torque: 97 Nm / 9.88 kgf-m / 71.5 bl-ft @ 6250 rpm.
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Wave twin beam in box-type aluminium-magnesium alloy, highly-resistant removable steel rear subframe
Front Suspension: Marzocchi hydraulic fork, ~A50 mm
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Aluminium alloy swing arm, progressive linkage. Sachs hydraulic shock absorber, rebound and preload adjustable.
Rear Wheel Travel: 185 mm / 7.3 in

The post Aprilia ETV 1000 Caponord (2004) appeared first on MotorcycleSpecifications.com.