MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Bimota Specifications

Bimota Tesi ID 904ES (1993)

Entry updated

Bimota Tesi ID 904ES (1993)

At a glance

Capacity
904 cc / 55.2 cub. in.
Power
85.3 kW / 117 hp @ 9000 rpm
Torque
85.3Nm / 8.7 kgf-m / 62.9 [email protected] 8000 rpm

The full picture.

The Bimota Tesi ID 904ES is a rare motorcycle, with only 50 units produced in 1993. It features a four stroke, 90 degree L twin cylinder engine with Weber fuel injection and electronic ignition. It has a maximum power of 85.3 kW and a maximum torque of 85.3 Nm. The frame is made of two upside down boomerang shaped plates that are machined from aluminium alloy, and the engine has no load bearing functions. The swing arms are made of anticordal alloy. The front suspension is a swinging arm with Marzocchi single shock stepless preload 10-way compression and 25-way preload damping adjustment, while the rear suspension is a Marzocchi single shock with similar adjustment features. It weighs 188 kg and has a fuel capacity of 16 litres. The motorcycle has a 6 speed transmission and a chain final drive, and the brakes feature 2x 320mm discs with 4 piston calipers in the front and a single 245mm disc with 1 piston caliper in the rear. The motorcycle has a wheelbase of 1410 mm and uses a 120/70-17 tyre in the front and a 180/55-17 tyre in the rear.


Technical specifications:

Make Model: Bimota Tesi ID 904ES

Motorcycle technical specifications
Year1993
Production50 units
EngineFour stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valves per cylinder
Cooling SystemLiquid cooled
Capacity904 cc / 55.2 cub. in.
Bore x Stroke92 x 68 mm
Compression Ratio10.4:1
InductionWeber fuel injection
IgnitionElectronic
StartingElectric
Max Power85.3 kW / 117 hp @ 9000 rpm
Max Torque85.3Nm / 8.7 kgf-m / 62.9 [email protected] 8000 rpm
Transmission6 Speed
Final DriveChain
FramePair of upside down boomerang shaped plates that envelope the engine on either side. They are made of aluminium alloy and are machined not cast. The engine, unlike the preceding series, has no load bearing functions. At the far ends of the engine are the hinged swing arms, made of anticordal alloy.
Front SuspensionSwinging arm with Marzocchi single shock stepless preload 10-way compression and 25-way preload damping adjustment
Rear SuspensionMarzocchi single shock stepless preload 10-way compression and 25-way preload damping adjustment
Wheelbase1410 mm / 55.5 in.
Front Brakes2x 320mm discs 4 piston calipers
Rear BrakesSingle 245mm disc 1 piston caliper
Front Tyre120/70-17
Rear Tyre180/55-17
Dry Weight188 kg / 414.5 lbs
Fuel Capacity16 Litres / 4.2 US gal.