AC Schnitzer R 1200RT and R1200ST (2005)

The AC Schnitzer R1200RT and R1200ST motorcycles were introduced in 2005. They both have a four-stroke, two-cylinder horizontally opposed Boxer air/oil-cooled engine with a capacity of 1170cc and a compression ratio of 12.0:1. The bikes have electronic intake manifold injection BMS-K induction and electric starting. The clutch is a single disc dry clutch that is hydraulically actuated. The maximum power output of the motorcycles is 81 kW/110 hp at 7750 rpm, and the maximum torque is 115 Nm/11.73 kgf-m/84.8 lb-ft at 6000 rpm. The transmission is a six-speed, and the final drive is a shaft.

The frame is a three-section frame made up of the front and rear section, with a load-bearing engine-gearbox unit. The front suspension uses BMW Motorrad Telelever with stanchion diameter of 35mm, a central spring strut, and rebound damping that is electronically adjustable with the standard ESA. The rear suspension is a die-cast aluminum single-sided swinging arm with BMW Motorrad EVO-Paralever, and the spring preload is hydraulically adjustable to continuously variable levels by means of electronically adjustable ESA. The rear suspension also has rebound damping with standard ESA. The front wheel is 3.5 x 17, and the rear wheel is 5.5 x 17. The front brakes consist of two 320 mm discs with four-piston calipers, and the rear brake is a single 265 mm disc with a two-piston caliper.

The fuel capacity of these motorcycles is 27 liters or 7.1 US gallons.

---

Technical specifications:

Make Model: AC Schnitzer R1200RT and R1200ST

Year: 2005

Engine: Four stroke, two cylinder horizontally opposed Boxer air/oil-cooled, DOHC, rocker arm, 4 valves per cylinder

Capacity: 1170 cc / 71.4 cu in

Bore x Stroke: 101 x 73 mm

Compression Ratio: 12.0:1

Induction: Electronic intake manifold injection BMS-K

Starting: Electric

Clutch: Single disc dry clutch, hydraulically actuated

Max Power: 81 kW / 110 hp @ 7750 rpm

Max Torque: 115 Nm / 11.73 kgf-m / 84.8 lb-ft @ 6000 rpm

Transmission: 6 Speed

Final Drive: Shaft

Frame: Three-section frame consisting of front and rear section, load bearing engine-gearbox unit

Front Suspension: BMW Motorrad Telelever, stanchion diameter 35mm, central spring strut, rebound damping electronically adjustable with standard ESA

Rear Suspension: Die-cast aluminium single-sided swinging arm with BMW Motorrad EVO-Paralever, spring preload hydraulically adjustable to continuously variable levels by means of electronically adjustable ESA, rebound damping with standard ESA

Front Wheel: 3.5 x 17

Rear Wheel: 5.5 x 17

Front Brakes: 2 x 320 mm discs, 4-piston calipers

Rear Brakes: Single 265 mm disc, 2-piston caliper

Fuel Capacity: 27 Litres / 7.1 US gal