Yamaha DT125 Tenere (1989-90)

The Yamaha DT125 Tenere is a off-road motorcycle that was produced between 1989-1990. It features a two stroke, single cylinder engine with a reed-valve and a capacity of 123cc. The compression ratio is 6.8:1 and it has an autolube lubrication system with a capacity of 1.2 litres of oil. The motorcycle has a VM24 carburetor and CDI ignition with a kick start. The maximum power output is 14 horsepower at 6500 rpm and maximum torque is 1.5 kgf-m at 6500 rpm. The DT125 Tenere has a wet multiplate clutch and a 6 speed transmission with a final chain drive system. The front suspension is telescopic forks and the rear suspension is a monocross design. The front brake is a single 230mm disc and the rear brake is a single 220mm disc. The front and rear tires are respectively 2.75-21 and 4.10-18. The overall dimensions are 2135mm in length, 820mm in width and 1255mm in height. The wheelbase is 1360mm, the seat height is 840mm and the ground clearance is 270mm. The DT125 Tenere weighs around and has a fuel capacity that is unspecified.

Technical specifications:

Make Model: Yamaha DT 125R T~A(c)n~A(c)r~A(c)

Year: 1989-90
Engine: Two stroke, single cylinder, reed-valve
Capacity: 123 cc / 7.5 cu-in
Bore x Stroke: 56 X 50 mm
Compression Ratio: 6.8:1
Lubrication: Autolube
Oil Capacity: 1.2 Litres
Induction: VM24 carburetor
Ignition: CDI
Starting: Kick
Max Power: 14 hp / 10.3 kW @ 6500 rpm
Max Torque: 1.5 kgf-m / 15.2 Nm @ 6500 rpm
Clutch: Wet multiplate
Transmission: 6 speed
Final Drive: Chain
Front Suspension: Telescopic Forks
Rear Suspension: Monocross
Front Brakes: Single 230mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 2.75-21
Rear Tyre: 4.10-18
Dimensions: Length 2135 mm / 81.0 in Width 820 mm / 32.2 in Height 1255 mm / 49.4 in
Wheelbase: 1360 mm / 53.5 in
Seat Height: 840 mm / 33.0 in
Ground Clearance: 270 mm / 10.6 in
Wet Weight:
Fuel Capacity: