Victory Kingpin (2008)

The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio of 9.8:1 and uses electronic fuel injection with 44mm throttle bodies. The clutch is a wet, multi-plate, and the transmission has six speeds. The final drive is a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front tire is 130/70-21, and the rear tire is 180/55 B18. The seat height is 673 mm, and the dry weight is 304 kg. The fuel capacity is 17 liters, and the GVWR is 549 kg.

---

Technical specifications:

Make Model: Victory Kingpin 8 Ball

Year: 2008

Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder

Capacity: 1634 cc / 100 cu-in

Bore x Stroke: 101 x 102 mm

Cooling System: Air / oil

Compression Ratio: 9.8:1

Induction: Electronic Fuel Injection with 44mm throttle bodies

Starting: Electric

Battery: 12 volts / 18 amp hours

Clutch: Wet, multi-plate

Transmission: 6 Speed

Final Drive: Carbon Fiber Reinforced Belt

Front Suspension: 43mm Inverted cartridge telescopic fork

Front Wheel Travel: 130 mm / 5.1 in

Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage

Rear Wheel Travel: 100 mm / 3.9 in

Front Brakes: Single 300mm floating rotor 4 piston caliper

Rear Brakes: Single 300mm floating rotor 2 piston caliper

Front Tyre: 130/70 -21

Rear Tyre: 180/55 B18

Seat Height: 673 mm / 26.5 in

GVWR: 549 kg / 1210 lbs

Dry Weight: 304 kg / 670 lbs

Fuel Capacity: 17 Litres / 4.5 US gal