The Victory Kingpin 8 Ball motorcycle was produced in 2008 and has a four-stroke, 50-degree V twin SOHC engine with a capacity of 1634 cc. It has a compression ratio of 9.8:1 and uses electronic fuel injection with 44mm throttle bodies. The clutch is a wet, multi-plate, and the transmission has six speeds. The final drive is a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork, and the rear suspension is a single, mono-tube gas forged and cast aluminum with rising-rate linkage. The bike has a single 300mm floating rotor 4 piston caliper for the front brakes and a single 300mm floating rotor 2 piston caliper for the rear brakes. The front tire is 130/70-21, and the rear tire is 180/55 B18. The seat height is 673 mm, and the dry weight is 304 kg. The fuel capacity is 17 liters, and the GVWR is 549 kg.
Technical specifications:
Make Model: Victory Kingpin 8 Ball
| Year | 2008 |
|---|---|
| Engine | Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder |
| Capacity | 1634 cc / 100 cu-in |
| Bore x Stroke | 101 x 102 mm |
| Cooling System | Air / oil |
| Compression Ratio | 9.8:1 |
| Induction | Electronic Fuel Injection with 44mm throttle bodies |
| Starting | Electric |
| Battery | 12 volts / 18 amp hours |
| Clutch | Wet, multi-plate |
| Transmission | 6 Speed |
| Final Drive | Carbon Fiber Reinforced Belt |
| Front Suspension | 43mm Inverted cartridge telescopic fork |
| Front Wheel Travel | 130 mm / 5.1 in |
| Rear Suspension | Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage |
| Rear Wheel Travel | 100 mm / 3.9 in |
| Front Brakes | Single 300mm floating rotor 4 piston caliper |
| Rear Brakes | Single 300mm floating rotor 2 piston caliper |
| Front Tyre | 130/70 -21 |
| Rear Tyre | 180/55 B18 |
| Seat Height | 673 mm / 26.5 in |
| GVWR | 549 kg / 1210 lbs |
| Dry Weight | 304 kg / 670 lbs |
| Fuel Capacity | 17 Litres / 4.5 US gal |
