The MV Agusta 250 Turismo was produced from 1947 to 1950, with approximately 100 units produced. It features a four-stroke, single cylinder, pushrod, and two-valve engine with a capacity of 249 cc. The engine has a compression ratio of 6.0:1 and is cooled by air. The bike has a 22 mm carburettor and wet sump lubrication. The ignition is controlled by a flywheel magneto, and the bike starts with a kick. It has a maximum power of 7.4 kW/10.0 hp at 5100 rpm. The transmission is a 4-speed, and the final drive is via a chain. The frame is a closed tubular steel cradle with telescopic mechanical front suspension and a plunger-box rear suspension. The front and rear brakes are both 180 mm drums. The bike’s dimensions are 1960 mm in length, 620 mm in width, and a wheelbase of 1390 mm. The bike weighs 125 kg and has an 18-litre fuel capacity.
Technical specifications:
Make Model: MV Agusta 250 Turismo
| Year | 1947 – 50 |
|---|---|
| Units Produced | approx. 100 |
| Engine | Four stroke, single cylinder, pushrod, 2 valve |
| Capacity | 249 cc / 15.2 cu-in |
| Bore x Stroke | 63 x 80 mm |
| Cooling System | Air cooled |
| Compression Ratio | 6.0:1 |
| Induction | 22 mm Carburettor |
| Lubrication | Wet sump |
| Ignition | Flywheel magneto |
| Starting | Kick |
| Max Power | 7.4 kW /10.0 hp @ 5100 rpm |
| Clutch | Wet multiple plate clutch |
| Transmission | 4 speed |
| Final Drive | Chain |
| Frame | Closed tubular steel cradle |
| Front Suspension | tTlescopic mechanical fork |
| Rear Suspension | Plunger-box |
| Front Brakes | 180mm Drum |
| Rear Brakes | 180mm Drum |
| Front Tyre | 3.00-19 |
| Rear Tyre | 3.00-19 |
| Dimensions | Length 1960 mm / 77.1 in Width 620 mm / 24.4 in |
| Wheelbase | 1390 mm / 51.1 in |
| Weight | 125 Kg / 275.5 lbs |
| Fuel Capacity | 18 Litres / 4.7 US gal |
