The MV Agusta 125 Pullman Super was produced between 1955 and 1957 with approximately 3000 units made. It had a two-stroke, single-cylinder engine with a capacity of 125cc and a bore/stroke of 53 x 56mm. The engine had a flat piston and used a 17mm carburetor with a compression ratio of 6.1:1. The bike was air-cooled and had a kick start system. The maximum power output was 4.4kW/6.0hp at 4500 rpm. The clutch was a wet multiple plate clutch with a 4-speed transmission and chain final drive. The pressed steel beam frame was supported by leading link front suspension and swingarm rear suspension with hydraulic shocks. The bike had 123mm drum brakes on both the front and rear wheels, with 2.75-18 tires on both ends. The dimensions were 1880mm in length and 620mm in width with a wheelbase of 1245mm. The bike weighed 75kg and had a fuel capacity of 13 liters (3.4 US gallons).
Technical specifications:
Make Model: MV Agusta 125 Pullman Super
| Year | 1955 – 57 |
|---|---|
| Units Produced | approx. 3000 |
| Engine | Two stroke, single cylinder |
| Capacity | 125 cc / 7.6 cu-in |
| Bore x Stroke | 53 x 56 mm |
| Distribution | Flat piston |
| Cooling System | Air cooled |
| Compression Ratio | 6.1:1 |
| Induction | 17 mm Carburettor |
| Lubrication | 6% mixture |
| Ignition | Flywheel magneto |
| Starting | Kick |
| Max Power | 4.4 kW / 6.0 hp @ 4500 rpm |
| Clutch | Wet multiple plate clutch |
| Transmission | 4 Speed |
| Final Drive | Chain |
| Frame | Pressed steel beam |
| Front Suspension | Leading link |
| Rear Suspension | Swingarm with hydraulic shocks |
| Front Brakes | 123mm Drum |
| Rear Brakes | 123mm Drum |
| Front Tyre | 2.75-18 |
| Rear Tyre | 2.75-18 |
| Dimensions | Length 1880 mm / 74.0 in Width 620 mm / 24.4 in |
| Wheelbase | 1245 mm / 49.0 in |
| Weight | 75 Kg / 165.3 lbs |
| Fuel Capacity | 13 Litres / 3.4 US gal |
