Moto Guzzi V 65 Florida (1985)

The Moto Guzzi V 65 Florida is a motorcycle model from 1985 with a four-stroke, 90-degree V twin engine. The engine has a capacity of 643cc and is longitudinally mounted with overhead valves and 2 valves per cylinder. Cooling system is air cooled with a compression ratio of 10.0:1. The motorcycle uses two Dell’Orto PHBH30 carburetors for induction and electronic ignition for starting. It has a maximum power of 52 horsepower at 7050 rpm and a torque of 54.4 Nm at 6000 rpm. The clutch is a dry single plate and the transmission is a 5-speed. The final drive is shaft. The frame is a tubular cradle, disassemblable while front suspension is telehydraulic gas forks and rear suspension is a swinging arm fork with hydraulic gas shock absorbers. The brakes consist of two 260mm discs with two-piston calipers at the front and a single 235mm disc with one piston caliper at the rear. The tyres are 100/90 V18 at the front and 130/90 V18 at the rear. It has a dry weight of 170 kg and a fuel capacity of 17 litres or 4.5 US gal.

Technical specifications:

Make Model: Moto Guzzi V 65 Florida

Year: 1985 –
Engine: Four stroke, 90 degrees V twin, longitudinally mounted, OHV, 2 valve per cylinder.
Capacity: 643 cc / 39.2 cu-in
Bore x Stroke: 80 x 64 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 2x Dell’Orto PHBH30 carburetors
Ignition: Electronic
Starting: Electric
Max Power: 52 hp / 37.9 kW @ 7050 rpm
Max Torque: 54.4 Nm / 40.1 lb-ft @ 6000 rpm
Clutch: Dry single plate
Transmission: 5 Speed
Final Drive: Shaft
Frame: Tubular cradle, disassemblable
Front Suspension: Telehydraulic gas forks
Rear Suspension: Swinging arm fork with hydraulic gas shock absorbers
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 235mm disc 1 piston caliper
Front Tyre: 100/90 V18
Rear Tyre: 130/90 V18
Dry Weight: 170 kg / 374 lbs
Fuel Capacity: 17 Litres / 4.5 US gal