KTM 990 Adventure (2013-14)

The KTM 1190 Adventure R is a powerful motorcycle model that was produced between 2013 and 2014. It features a four-stroke, 75-degree V-twin cylinder engine with a capacity of 1195 cc and a liquid cooling system. The compression ratio is 12.5:1, and the lubrication is forced oil with three rotor pumps. The bike uses EFI ride-by-wire induction and contactless, controlled, fully electronic ignition with digital timing adjustment. It has a maximum power output of 147.5 hp and a torque of 92.2 lb-ft. This motorcycle also features a 6-speed transmission and a chain final drive. The frame is made of chrome molybdenum steel and is powder-coated. The front suspension consists of 48mm WP USD forks with a travel of 220 mm, and the rear suspension uses a WP-PDS rear shock with hydraulic spring preload and the same travel. The motorcycle has 2x 320mm discs with 4-piston calipers on the front brakes and a single 267mm disc with 2-piston caliper for the rear brakes. The steering head angle is 64 degrees, and the rake is 26.0 degrees with a trail of 129.5 mm. The wheelbase is 1580 mm, and the seat height is 890 mm, giving the rider a ground clearance of 250 mm. The dry weight of the bike is 217 kg, and it has a fuel capacity of 23 liters.

---

Technical specifications:

Make Model: KTM 1190 Adventure R

Year: 2013 – 14

Engine: Four stroke, 75 degreesV-twin cylinder, DOHC, 4 valves per cylinder

Capacity: 1195 cc / 72.9 cu-in

Bore x Stroke: 105 x 69 mm

Cooling System: Liquid cooling

Compression Ratio: 12.5:1

Lubrication: Forced oil lubrication with 3 rotor pumps

Induction: EFI, ride by wire

Ignition: Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment

Starting: Electric

Max Power: 147.5 hp / 107.7 kW @ 9500 rpm

Max Torque: 92.2 lb-ft / 124.8 Nm @ 7500 rpm

Clutch: Wet multi-disc clutch, hydraulically operated

Transmission: 6 Speed

Final Drive: Chain 5/8 x 5/16″ X Ring

Primary gear ratio: 40:76

Secondary gear ratio: 17:42

Frame: Tubular space frame made from chrome molybdenum steel, powder-coated

Front Suspension: 48mm WP USD forks

Front Wheel Travel: 220 mm / 8.6 in

Rear Suspension: WP-PDS rear shock, hydraulic spring preload.

Rear Wheel Travel: 220 mm / 8.6 in

Front Brakes: 2x 320mm discs 4 piston calipers

Rear Brakes: Single 267mm disc 2 piston caliper

Front Tyre: 90 / 90 ZR21

Rear Tyre: 150/60 ZR18

Steering Head Angle: 64 degrees

Rake: 26.0 degrees

Trail: 129.5 mm / 5.1 in.

Wheelbase: 1580 mm / 62.2 in

Seat Height: 890 mm / 35 in

Ground Clearance: 250 mm / 9.8 in (unloaded)

Dry Weight: 217 kg / 478.4 lb

Fuel Capacity: 23 Litres / 6.08 gal