MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Husqvarna Specifications

Husqvarna WR 300 (2011-12)

Entry updated

Husqvarna WR 300 (2011-12)

At a glance

Capacity
293.1 cc / 17.8 cu-in

The full picture.

The Husqvarna WR 300 is a two stroke, single cylinder, HTS Power Valve motorcycle with a 293.1cc capacity engine. It has a liquid cooling system, premix 50:1 lubrication, and uses a Mikuni TMX 38 carburetor for induction. The electronic C.D.I., analogue type ignition has variable advance, and starting is done by kick. The motorcycle has a wet multi-plate clutch and a 5-speed transmission with chain final drive. The frame is made of steel single tube cradle with a rear frame in light alloy. The front suspension is equipped with a Marzocchi USD telescopic hydraulic fork with advanced axle compression and a rebound stroke adjustment. The rear suspension has a Sachs progressive soft damp type with a single hydraulic shock absorber, spring pre-load adjustment, and compression and rebound adjustment. The motorcycle has a 27.0 degree rake and 100mm trail, with a wheelbase of 1495mm and ground clearance of 345mm. It weighs 107kg and has a fuel capacity of 9.5 litres.


Technical specifications:

Make Model: Husqvarna WR 300

Motorcycle technical specifications
Year2011 – 12
EngineTwo stroke, single cylinder, HTS Power Valve
Capacity293.1 cc / 17.8 cu-in
Bore x Stroke72 x 72mm
Cooling SystemLiquid cooled
Compression Ratio6.9: 1
LubricationPremix 50: 1
InductionMikuni TMX 38 carburetor
IgnitionElectronic C.D.I., analogue type with variable advance
StartingKick
Max Power
ClutchWet multi-plate with mechanical control
Transmission5 Speed
Final DriveChain
Gear Ratio1st: 20,220 2nd: 16,513 3rd: 13,564 4th: 11,422 5th: 9,932
FrameSteel single tube cradle (round tubes); rear frame in light alloy
Front SuspensionMARZOCCHI USD telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment Fork leg diameter 50 mm
Front Wheel Travel300 mm / 11.8 in
Rear SuspensionSACHS Progressive Soft Damp type with single hydraulic shock absorber, spring pre-load adjustment. Compression and rebound adjustment (compression stroke – double adjustment)
Rear Wheel Travel300 mm / 296 mm / 11.7 in
Front BrakesSingle 260mm disc
Rear BrakesSingle 220mm disc
Front Tyre90/90 -21
Rear Tyre140/80 -18
Rake27.0 degrees
Trail100 mm / 3.9 in
Wheelbase1495 mm / 58.9 in
Wheelbase985 mm / 38.8 in
Ground Clearance345 mm / 13.6 in
Dry Weight107 kg / 235.9 lbs
Fuel Capacity9.5 Litres / 2.5 US gal