Husaberg FE 250 Enduro (2013-15)

The Husaberg FE 250 Enduro motorcycle was produced from 2013 to 2015 and features a four-stroke, single-cylinder, SOHC engine with a capacity of 249.7 cc/15.2 cu-in. The engine is liquid-cooled and has a compression ratio of 12.2:1, lubricated by pressure lubrication with two oil pumps using Motorex SAE 10W-50 engine oil. The bike has an aluminium silencer, Keihin EFI throttle body 42 mm induction, and Keihin EMS ignition. The electric starter has a 12V 4Ah/12V 7Ah battery. The clutch is a wet multi-disc type with Brembo hydraulics, and the transmission includes six speeds, final drive Chain X-Ring 5/8 x 1/4″, and a primary ratio of 24:73. The handlebar is Neken aluminium 28/22 mm, and the frame is a double cradle perimeter design 25CrMo4 with a subframe consisting of cross-linked polyethylene. The front suspension includes WP 4860MA HUSABERG SUPERMOTO with 300 mm wheel travel, while the rear shock absorber is WP-PD S and has 335mm wheel travel. The front and rear brakes have a single 260mm 2 piston caliper and a single 220mm disc 1 piston caliper, respectively. The front and rear wheels are 1.60 x 21″ DID and 2.15 x 18″ DID, respectively. The seat height is 970 mm/38.1 in, and the dry weight is 107.5 kg/237 lbs. The bike has a fuel capacity of 9.5 litres/2.5 US gal, a wheelbase of 1482 mm/58.3 in, a ground clearance of 345 mm/13.5 in, and a steering head angle of 63.5 degrees.

Technical specifications:

Make Model: Husaberg FE 250 Enduro