Categories: Harley-Davidson

Harley Davidson FLS Softail Slim S (2016-17)

The Harley Davidson FLS Softail Slim S motorcycle was produced from 2016 to 2017 with a Screamin’ Eagle (R), Twin Cam 110B c engine with a capacity of 1801 cc. It has a maximum torque of 145 Nm at 3000 rpm and is equipped with Electronic Sequential Port Fuel Injection (ESPFI) and an electronic ignition system. The transmission has six speeds and the final drive is via a belt, with a primary drive chain. The frame is made of mild steel with a rectangular section backbone and stamped, cast, and forged junctions, while the swingarm is made of round tube sections and forged junctions. The front suspension is a telescopic design, and the rear suspension is a hidden, horizontal-mounted, coil-over style. The front and rear brakes are single discs with four and two-piston calipers respectively. The wheels are black, laced steel with the front wheel equipped with a MT90B16 72H tyre and the rear with a MU85B16 77H tyre. The motorcycle weighs 308 kg dry and 321 kg wet, with a gross vehicle weight rating of 526.0 kg. The fuel capacity is 18.9 litres, and the oil capacity is 3.3 litres. The seat height is 650 mm, and the ground clearance is 115 mm.


Technical specifications:

Make Model: Harley Davidson FLS Softail Slim S

Year: 2016 – 17
Engine: Screamin’ Eagle (R), Twin Cam 110B c
Capacity: 1801 cc / 109.9 cu in
Bore x Stroke: 101.6 x 111.1 mm
Cooling System: Air-cooled
Compression Ratio: 9.2:1
Exhaust: Black over/under shotgun exhaust with slash-cut mufflers
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Electronic
Starting: Electric
Max Torque: 145 Nm / 14.8 kgf-m / 107.0 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79:1
Frame: Frame Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded Swingarm Mild steel, round tube sections, forged junctions; MIG welded
Lean Angle, Left: 24o
Lean Angle, Right: 24.9o
Front Suspension: 41.3 mm telescopic, beer can covers
Rear Suspension: Hidden, horizontal-mounted, coil-over
Front Brakes: Single 292 mm discs, 4 piston caliper
Rear Brakes: Single 292 mm disc, 2 piston caliper
Front Wheel: Black, Laced Steel
Rear Wheel: Black, Laced Steel
Front Tyre: MT90B16 72H
Rear Tyre: MU85B16 77H
Rake: 32.1 degrees
Trail: 147 mm / 5.8 in
Dimensions: Length 2350 mm / 92.5 in
Wheelbase: 1635 mm / 64.3 in
Seat Height: Unladen 650 mm / 25.6 in.
Ground Clearance: 115 mm / 4.5 in
Dry Weight: 308 kh / 679 lbs
Wet Weight: 321 kg / 708 lbs
Gross Vehicle Weight Rating: 526.0 kg / 1160 lbs.
Oil Capacity: 3.3 Litres / 3.5 US qt
Fuel Capacity: 18.9 Litres / 5.0 US gal

admin

Share
Published by
admin

Recent Posts

Suzuki V-Strom 800 (2024)

The 2024 Suzuki V-Strom 800 is the road-focused member of the 776 cc V-Strom family.…

17 hours ago

Suzuki GSX-8R (2024)

The Suzuki GSX-8R is a fully faired middleweight introduced for the 2024 model year. Its…

2 days ago

BMW R 1300 GS (2024)

The 2024 BMW R 1300 GS introduces a redesigned 1300 cc boxer engine and a…

3 days ago

Yamaha YZF-R9 (2025)

The Yamaha YZF-R9 joins the supersport range for 2025 with an 890 cc three-cylinder engine.…

4 days ago

Honda XL750 Transalp (2025)

The Honda XL750 Transalp combines a 755 cc parallel-twin engine with a 21-inch front wheel…

5 days ago

Honda CB750 Hornet (2025)

The 2025 Honda CB750 Hornet is a middleweight roadster powered by a 755 cc parallel…

6 days ago