MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Harley-Davidson Specifications

Harley Davidson FLS Softail Slim S (2016-17)

Entry updated

Harley Davidson FLS Softail Slim S (2016-17)

At a glance

Capacity
1801 cc / 109.9 cu in
Torque
145 Nm / 14.8 kgf-m / 107.0 ft. lbs @ 3000 rpm
Seat height
Unladen 650 mm / 25.6 in.

The full picture.

The Harley Davidson FLS Softail Slim S motorcycle was produced from 2016 to 2017 with a Screamin’ Eagle (R), Twin Cam 110B c engine with a capacity of 1801 cc. It has a maximum torque of 145 Nm at 3000 rpm and is equipped with Electronic Sequential Port Fuel Injection (ESPFI) and an electronic ignition system. The transmission has six speeds and the final drive is via a belt, with a primary drive chain. The frame is made of mild steel with a rectangular section backbone and stamped, cast, and forged junctions, while the swingarm is made of round tube sections and forged junctions. The front suspension is a telescopic design, and the rear suspension is a hidden, horizontal-mounted, coil-over style. The front and rear brakes are single discs with four and two-piston calipers respectively. The wheels are black, laced steel with the front wheel equipped with a MT90B16 72H tyre and the rear with a MU85B16 77H tyre. The motorcycle weighs 308 kg dry and 321 kg wet, with a gross vehicle weight rating of 526.0 kg. The fuel capacity is 18.9 litres, and the oil capacity is 3.3 litres. The seat height is 650 mm, and the ground clearance is 115 mm.


Technical specifications:

Make Model: Harley Davidson FLS Softail Slim S

Motorcycle technical specifications
Year2016 – 17
EngineScreamin’ Eagle (R), Twin Cam 110B c
Capacity1801 cc / 109.9 cu in
Bore x Stroke101.6 x 111.1 mm
Cooling SystemAir-cooled
Compression Ratio9.2:1
ExhaustBlack over/under shotgun exhaust with slash-cut mufflers
InductionElectronic Sequential Port Fuel Injection (ESPFI)
IgnitionElectronic
StartingElectric
Max Torque145 Nm / 14.8 kgf-m / 107.0 ft. lbs @ 3000 rpm
Transmission6 Speed
Final DriveBelt
Primary DriveChain, 34/46 ratio
Gear Ratio1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79:1
FrameFrame Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded Swingarm Mild steel, round tube sections, forged junctions; MIG welded
Lean Angle, Left24o
Lean Angle, Right24.9o
Front Suspension41.3 mm telescopic, beer can covers
Rear SuspensionHidden, horizontal-mounted, coil-over
Front BrakesSingle 292 mm discs, 4 piston caliper
Rear BrakesSingle 292 mm disc, 2 piston caliper
Front WheelBlack, Laced Steel
Rear WheelBlack, Laced Steel
Front TyreMT90B16 72H
Rear TyreMU85B16 77H
Rake32.1 degrees
Trail147 mm / 5.8 in
DimensionsLength 2350 mm / 92.5 in
Wheelbase1635 mm / 64.3 in
Seat HeightUnladen 650 mm / 25.6 in.
Ground Clearance115 mm / 4.5 in
Dry Weight308 kh / 679 lbs
Wet Weight321 kg / 708 lbs
Gross Vehicle Weight Rating526.0 kg / 1160 lbs.
Oil Capacity3.3 Litres / 3.5 US qt
Fuel Capacity18.9 Litres / 5.0 US gal