Ducati ST3 ABS (2006-07)

The Ducati ST3 ABS (2006-2007) is a 992 cc motorcycle with a four-stroke, twin cylinder engine featuring DOHC and desmodromic 3 valves per cylinder. It has a liquid cooling system and a bore x stroke of 94 x 71.5 mm with a compression ratio of 11.3:1. The lubrication system is wet sump and it uses synthetic oil. Marelli electronic fuel injection is utilized with 50 mm throttle bodies, while the Marelli electronic ignition system runs on Champion RA59GL spark plugs. The motorcycle is electric-start and produces a maximum power output of 75 kW / 102 hp @ 8750 rpm and a maximum torque of 93 Nm / 9.5 kgf-m / 62 ft-lb @ 7250 rpm. The clutch is cable-operated, wet, and multiple-discs, and it uses a six-speed transmission with chain final drive. The frame is a tubular steel trellis, with a Showa 43 mm adjustable preload upside-down fork in the front suspension and a progressive linkage with fully adjustable Sachs monoshock in the rear suspension. The front wheel travel is 130 mm/5.1 in while the rear wheel travel is 148 mm/5.8 in. The bike has an ABS system.

Technical specifications:

Make Model: Ducati ST3

Year: 2006 – 07
Engine: Four stroke, 90 degrees L twin cylinder, DOHC, desmodromic 3 valves per cylinder
Capacity: 992 cc / 60.5 cu-in
Cooling System: Liquid cooled
Bore x Stroke: 94 x 71.5 mm
Compression Ratio: 11.3:1
Lubrication: Wet sump
Engine Oil: Synthetic, 20W/50
Induction: Marelli electronic fuel injection, 50 mm throttle bodies
Ignition: Marelli electronic
Spark Plug: Champion, RA59GL
Starting: Electric
Max Power: 75 kW / 102 hp @ 8750 rpm
Max Torque: 93 Nm / 9.5 kgf-m / 62 ft-lb @ 7250 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel trellis
Front Suspension: Showa 43 mm adjustable preload upside-down fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Progressive linkage with fully adjustable Sachs monoshock
Rear Wheel Travel: 148 mm / 5.8 in