Ducati Scrambler Full Throttle Special (2018)

The 2018 Ducati Scrambler Full Throttle Special is a motorcycle with a four stroke engine, 803 cc capacity and 90 degrees L twin cylinder. It has a compression ratio of 11.0:1 and is cooled by air. The motorcycle is equipped with electronic fuel injection, 50 mm throttle bodies, and Marelli electronic ignition for starting. It also has a clutch with APTC wet multiplate with mechanical control, and a six speed transmission with chain final drive. The frame is a tubular steel Trellis design, and the motorcycle has a Kayaba rear shock that is pre-load adjustable. The front and rear wheels are made of light alloy, while the front brake is a single 330 mm disc with a 4-piston caliper, and the rear brake is a single 245 mm disc with a 1-piston caliper, both with ABS as standard equipment. The Scrambler Full Throttle Special has a total steering lock of 35 degrees and a seat height of 790 mm. The motorcycle is 2100 – 2165 mm in length, 1150 mm in height, and 845 mm in width. Its dry weight is 170 kg, and its wet weight is 186 kg with a fuel capacity of 13.5 litres. The Ducati Scrambler Full Throttle Special also has specifications such as an upside down Kayaba 41 mm fork for front suspension, a 180/55 R17 Pirelli MT 60 RS rear tire, and a rake of 24 degrees.

---

Technical specifications:

Make Model: Ducati Scrambler Full Throttle Special

Year: 2018

Engine: Four stroke, 90 degrees L twin cylinder, SOHC, desmodromic 2 valve per cylinder

Capacity: 803 cc / 49.0 cub in

Bore x Stroke: 88 x 66 mm

Cooling System: Air cooled

Compression Ratio: 11.0:1

Induction: Electronic fuel injection, 50 mm throttle bodies

Ignition: Marelli electronic

Starting: Electric

Exhaust: Exhaust system with twin stainless steel mufflers with aluminium exterior cover, catalytic converter and 2 lambda probes

Max Power: 55 kW / 75 hp @ 8250 rpm

Max Torque: 68 Nm / 6.9 kgf-m / 50 lb-ft @ 5750 rpm

Clutch: APTC wet multiplate with mechanical control

Transmission: 6 Speed

Final Drive: Chain, front spocket 15, rear sprocket 46

Primary Drive: Straight cut gears, ratio 1.85:1

Gear Ratio: 1st 20/13, 2nd 30/18, 3rd 28/21, 4th 26/23, 5th 22/22, 6th 24/26

Frame: Tubular steel Trellis frame

Front Suspension: Upside down Kayaba 41 mm fork

Front Wheel Travel: 150 mm / 5.9 in

Rear Suspension: Kayaba rear shock, pre-load adjustable

Rear Wheel Travel: 150 mm / 5.9 in

Front Brakes: Single 330 mm disc, 4-piston caliper with ABS as standard equipment

Rear Brakes: Single 245 mm disc, 1-piston caliper with ABS as standard equipment

Front Wheel: 10-spoke in light alloy 3.00″ x 18″

Rear Wheel: 10-spoke light alloy 5.50″ x 17″

Front Tyre: 110/80 R18 Pirelli MT 60 RS

Rear Tyre: 180/55 R17 Pirelli MT 60 RS

Rake: 24 degrees

Trail: 112 mm / 4.4 in

Total steering lock: 35 degrees

Dimensions: Length 2100 – 2165 mm / 82.7 – 85.2 in Height 1150 mm / 45.3 in Width 845 mm / 33.3 in

Wheelbase: 1455 mm / 57.3 in

Seat Height: 790 mm / 31.1 in. low seat 770 mm / 30.3 in. available as accessory

Dry Weight: 170 kg / 375 lbs

Wet Weight: 186 kg / 410 lbs

Fuel Capacity: 13.5 Litres / 3.57 US gal / 3.0 Imp gal