Ducati Scrambler 1100 (2018)

The Ducati Scrambler 1100 is a motorcycle model from 2018 with an L-Twin engine that has a capacity of 1079cc. It has electronic fuel injection and a Marelli electronic ignition, as well as a hydraulic clutch control. The bike has a 6-speed transmission and a chain final drive with a straight cut gear and a torque of 88 Nm at 4750 rpm. The frame is a tubular steel trellis design, with Marzocchi fully adjustable fork front suspension and Kayaba monoshock rear suspension. The front brakes consist of two semi-floating discs with radially mounted Brembo Monobloc M4.32 callipers, while the Bosch Cornering ABS is standard equipment for both front and rear brakes. The wheels are 10-spoke light alloy, with Pirelli MT 60 RS tyres. The bike’s dimensions include a length of 2190mm, height of 1330mm, and width of 895mm, with a wheelbase of 1514mm and a seat height of 810mm. The dry weight of the Ducati Scrambler 1100 is 189kg, with a wet weight of 206kg, and a 15-litres fuel capacity.

---

Technical specifications:

Make Model: Ducati Scrambler 1100

Year: 2018

Engine: L-Twin, Desmodromic distribution, 2 valves per cylinder

Capacity: 1079 cc / 65.8 cu-in

Bore x Stroke: 98 x 71 mm

Cooling System: Air/oil cooled

Compression Ratio: 11.0:1

Induction: Electronic fuel injection, ~A55 mm throttle body with full Ride by Wire (RbW)

Ignition: Marelli electronic

Starting: Electric

Exhaust: 2-1-2 system with catalytic converter and 2 lambda probes, twin stainless steel muffler with aluminium covers and end caps

Max Power: 84.5hp / 63 kW @ 7500 rpm

Max Torque: 65 lb-ft / 88 Nm @ 4750 rpm

Clutch: Light action, wet, multi-plate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run

Transmission: 6 Speed

Final Drive: Chain, front sprocket 15; rear sprocket 39

Primary Drive: Straight cut gears; Ratio 1.85:1

Gear Ratio: 1=37/15 2=30/17 3=28/20 4=26/22 5=24/23 6=23/24

Frame: Tubular steel trellis frame

Front Suspension: Marzocchi fully adjustable ~A45 mm USD fork

Front Wheel Travel: 150 mm / 5.9 in

Rear Suspension: Kayaba monoshock, pre-load and rebound adjustable

Rear Wheel Travel: 150 mm / 5.9 in

Front Brakes: 2 x 320 mm semi-floating discs, radially mounted Brembo Monobloc M4.32 callipers, 4-piston, axial pump with Bosch Cornering ABS as standard equipment

Rear Brakes: 245 mm disc, 1-piston floating calliper with Bosch Cornering ABS as standard equipment

Front Wheel: 10-spoke in light alloy, 3.50″ x 18″

Rear Wheel: 10-spoke in light alloy, 5.50″ x 17″

Front Tyre: Pirelli MT 60 RS 120/80 ZR18

Rear Tyre: Pirelli MT 60 RS 180/55 ZR17

Rake: 24.5 degrees

Trail: 111 mm / 4.4 in

Total steering lock: 34 degrees

Dimensions: Length 2190 mm / 86.0 in Height 1330 mm / 52.4 in Width 895 mm / 35.2 in

Wheelbase: 1514 mm / 59.6 in

Seat Height: 810 mm / 31.9 in

Dry Weight: 189 kg / 417 lb

Wet Weight: 206 kg / 454 lb

Fuel Capacity: 15 Litres / 3.96 US gal