The Ducati 250 Scrambler was produced between 1965 and 1966, boasting a single cylinder Desmo SOHC engine with a capacity of 248cc. This motorcycle had a highly resistant tubular steel frame and was equipped with hydraulic telescopic forks for front suspension and dual shocks at the rear. The bike had a maximum power output of 18 hp at 7500 rpm and a five-speed transmission. The front and rear brakes were 180mm and 160mm drums, respectively, while the front and rear tires were 3.50-19 and 4.00-18 in size. The bike had a wet weight of 138 kg and a fuel capacity of 11 litres.
Make Model: Ducati 250 Scrambler
Year: 1965 – 66
Engine: Four stroke, single cylinder, Desmo SOHC, 2 valve
Capacity: 248 cc / 15.1 cu-in
Bore x Stroke: 74 x 57.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Induction: 29mm Dell’Orto carburetor
Electrics: Fywheel alternator and electronic regulator
Starting: Kick
Max Power: 13.5 kW / 18 hp @ 7500 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Highly resistant tubular steel frame
Front Suspension: Hydraulic telescopic forks
Rear Suspension: Dual chocks
Front Brakes: 180mm Drum
Rear Brakes: 160mm Drum
Front Tyre: 3.50-19
Rear Tyre: 4.00-18
Wet Weight: 138 kg / 304.2 lbs
Fuel Capacity: 11 Litres / 2.9 US gal / 2.4 Imp gal
The 2024 Suzuki V-Strom 800 is the road-focused member of the 776 cc V-Strom family.…
The Suzuki GSX-8R is a fully faired middleweight introduced for the 2024 model year. Its…
The 2024 BMW R 1300 GS introduces a redesigned 1300 cc boxer engine and a…
The Yamaha YZF-R9 joins the supersport range for 2025 with an 890 cc three-cylinder engine.…
The Honda XL750 Transalp combines a 755 cc parallel-twin engine with a 21-inch front wheel…
The 2025 Honda CB750 Hornet is a middleweight roadster powered by a 755 cc parallel…