Benelli Tornado 1130 (2006-07)

The Benelli Tornado Tre 1130 was a motorcycle produced between 2006 and 2007. It has a four-stroke, transverse three-cylinder engine with electronic injection and a capacity of 1130 cc. The engine produces a maximum power of 120 kW/163 hp at 10500 rpm and a maximum torque of 124 Nm/12.6 kgf-m/91.45 lb-ft at 8000 rpm. The bike also features a wet clutch with hydraulic command and six-speed transmission with chain drive. It has a mixed solution frame with a steel tube trellis at the front and an aluminium die-cast subframe. The front suspension is a Marzocchi upside-down stanchion fork 50mm, adjustable in compression and extension with spring pre-load while the rear suspension is an asymmetric swingarm with Extreme Technology single shock absorber. The bike has a front brake with 2 x 320mm discs and a rear brake with a single 240 mm disc. It has a wheelbase of 1419mm/55.9in, seat height of 807mm/31.8in, and a dry weight of 195kg/430lbs. The fuel capacity is 20.8 Litres/5.5 gal, and it has a ground clearance of 140mm/5.7in.

---

Technical specifications:

Make Model: Benelli Tornado Tre 1130

Year: 2006 – 07

Engine: Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder

Capacity: 1130 cc / 69 cu in

Bore x Stroke: 88 x 62 mm

Cooling System: Liquid cooled

Compression Ratio: 11.5:1

Lubrication: Wet sump

Induction: Electronic injection with 1 injector per cylinder

Exhaust: With catalytic converter and oxygen sensor

Spark Plug: NGK CR9E

Ignition: Electronic injection

Electric: Electric

Max Power: 120 kW / 163 hp @ 10500 rpm

Max Torque: 124 Nm / 12.6 kgf-m / 91.45 lb-ft @ 8000 rpm

Clutch: Wet clutch with hydraulic command

Transmission: 6 Speed

Final Drive: Chain drive, ratio 16:37

Primary Drive: 44/79

Gear Ratio: 1st 14/39 / 2nd 18/35 / 3rd 21/32 / 4th 23/30 / 5th 24/28 / 6th 26/27

Frame: Mixed solution. Front: ASD steel tube trellis, fastened to boxed rear section, aluminium alloy castings. Subframe: aluminium die-cast.

Front Suspension: Marzocchi upside down stanchion fork 50mm, adjustable in compression and extension with spring pre-load

Rear Suspension: Asymmetric swingarm, composed of cast aluminium and pressed in aluminium alloy, with Extreme Technology single shock absorber adjustable in compression, dual regulation for low and high speed damping andextension and spring pre-load.

Front Brakes: 2 x 320mm discs, 4 piston caliper

Rear Brakes: Single 240 mm disc, 2 piston caliper

Front Tyre: 120/70-17

Rear Tyre: 190/50-17

Wheelbase: 1419 mm / 55.9 in

Seat Height: 807 mm / 31.8 in

Ground Clearance: 140 mm / 5.7 in

Dry Weight: 195 kg / 430 lbs

Fuel Capacity: 20.8 Litres / 5.5 gal