Categories: Brammo

Brammo Enertia Electric (2014)

The Brammo Enertia Plus motorcycle was released in 2014 and is powered by a high output sealed brushless permanent magnet AC motor with a Brammo Power c Lithium-Ion NCM battery pack. The battery has a capacity of 6.2 kWh and a voltage of 88.8 V, with a recharge time of approximately 7.5 hours from 0% SOC. The bike has a maximum power of 13 kW and 17 hp at 4500 rpm, as well as a maximum torque of 40 Nm at 0-1450 rpm. It features a clutchless transmission and a lightweight extruded and welded aluminum frame that serves as a battery tray. The suspension consists of a Marzocchi Shiver hydraulic USD at the front and a Works Performance hydraulic with pre-load and rebound damping adjustment at the rear. The bike has Brembo hydraulic brakes on both the front and rear wheels and is equipped with regenerative braking technology. The driving range of the bike is 80 miles/129 km in the city, 45 miles/72 km on the highway at 55 mph/88 km/h, and 57.6 miles/93 km in combined city and highway driving. The top speed of the bike is 95 km/h or 60 mph. The bike has a weight of 150 kg or 330 lbs and a seat height of 810 mm or 32.0″. It is capable of providing the familiar rider feedback during deceleration due to the regenerative braking system.


Technical specifications:

Make Model: Brammo Enertia Plus

Year: 2014

Motor: High output sealed brushless permanent magnet AC

Battery: Brammo Power c Lithium-Ion NCM



Battery Pack Capacity: 6.2 kWh (nominal)

Battery Pack Voltage: 88.8 V (nominal)

Recharge Time: 2Approximately 7.5 hours from 0% SOC

Battery Life: 1,500 cycles to 80% initial capacity

Starting: Electric

Max Power: 13 kW / 17 hp @ 4500 rpm

Max Torque: 40 Nm / 4.08 kgf-m / 29.5 ft.lb @ 0 – 1450 rpm

Clutch: Clutchless

Transmission: Continuous

Frame: Lightweight extruded and welded aluminum – serves as a battery tray

Front Suspension: Marzocchi Shiver hydraulic USD with compression damping adjustment.

Front Wheel Travel: 127.5 mm / 5.0:

Rear Suspension: Works Performance hydraulic with pre-load and rebound damping adjustment.


Rear Wheel Travel: 127.5 mm / 5.0:

Front Brakes: Brembo hydraulic

Rear Brakes: Brembo hydraulic

Front Wheel: 2.50 x 18″ Cast aluminum

Rear Wheel: 3.5 x 17″ Cast aluminium

Dimensions: Length: 2070 mm / 81.5″ Width: 840 mm / 33.0″

Seat Height: 810 mm / 32.0″

Weight: 150 kg / 330 lbs

GVWR: 272 kg / 600 lbs

Regenerative Braking: Under deceleration, energy is returned to the battery system to both extend driving range and provide familiar rider feedback.


Driving Range: City: 80 miles/ 129* km Highway: (@55mph/88km/h): 45 miles/ 72 km** Combined: 57.6 miles/ 93 km*** *SAE City Riding Range Test Procedure for Electric Motorcycles (variable speed, 19 mph / 30km/h average) **SAE Highway / Constant Speed Riding Range Test Procedure for Electric Motorcycles (55 mph / 88 km/h sustained) *** SAE Highway Commuting Cycle (.5 City weighting, .5 Highway weighting)

Top Speed: 95 km/h / 60 mph
admin

Share
Published by
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago