The Aprilia RX 125 R is a motorcycle produced between 2010 and 2013. It features a single cylinder two-stroke engine with a capacity of 124.8 cc, a compression ratio of 12.5:1, and is homologated to Euro 3 standard. The engine uses an aluminium cylinder with a Nikasil coated liner, read valve intake, and separate mixing. It is liquid cooled and uses a Dell Orto VHST 28 induction system with electronic CDI ignition. The motorcycle can be started with both electric and kick methods. It has a maximum power output of 15.7 kW and a maximum torque of 16 Nm. The clutch is wet, multiplate, and the transmission has 6 speeds, with a final drive chain. The frame of the motorcycle is made of high strength steel with double trellis beam and double cradle, and a separate seat frame. The front suspension is an upside-down telescopic fork while the rear suspension is a steel swingarm with hydraulic monoshock and piggyback cylinder. The front brake features a single 260 mm disc with 2 piston caliper, and the motorcycle has a maximum wheel travel of 260 mm at the front and 270 mm at the rear.
Make Model: Aprilia RX 125
Year: 2010 – 13
Engine: Single cylinder two stroke. Aluminium cylinder with Nikasil coated liner. Read valve intake. Separate mixing. Homologated to Euro 3 standard.
Capacity: 124.8 cc / 7.6 cu in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…