Aprilia RS 125 Poggiali Replica (2005)

The Aprilia RS 125 Poggiali Replica is a motorcycle model from 2005 with a single cylinder two-stroke engine that provides 125cc/7.6 cu in. The engine has a bore x stroke of 54 x 54.5mm and a compression ratio of 14.5:1. The bike’s cooling system is liquid cooled with Dell’Orto VHSB 34LD induction and electronic ignition. The Aprilia RS 125 Poggiali Replica has a maximum output of 21 kW/28 hp @ 10500 rpm and a maximum torque of 19 Nm/1.9 kgf-m/14.1 lb-ft @ 9000 rpm. The bike has a 6-speed transmission and chain final drive. The front suspension is upside-down forks with a diameter of 40mm and 120mm/4.7in of front wheel travel. The rear suspension is a monoshock with the same amount of rear wheel travel. The front brakes are single 320 mm discs with 4 piston calipers while the rear brakes have a single 240 mm disc with 2 piston calipers. The front and rear tires are 110/70-17 and 150/60-17, respectively. The bike has a wheelbase of 1345mm/53.0in.

Technical specifications:

Make Model: Aprilia RS 125 Poggiali Replica

Year: 2005
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: Dell’Orto VHSB 34LD
Ignition: Electronic
Starting: Electric
Max Power: 21 kW / 28 hp @ 10500 rpm
Max Torque: 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Wheelbase: 1345 mm / 53.0 in