The Aprilia Pegaso 650 Factory motorcycle was produced in 2007-08, and is powered by a four-stroke, single-cylinder, liquid-cooled engine with electronic fuel injection. It has a capacity of 659 cc, with a bore x stroke of 100 x 84 mm and a compression ratio of 10.0:1. The ignition is digital and it has an electric starter. The maximum power output is 36.4 kW/48 hp at 6250 rpm, while the maximum torque is 61.3 Nm/45.2 lb-ft at 5200 rpm. The clutch is multi-plate in oil bath, and the transmission is a 5-speed with final drive via a chain.
The frame of the Aprilia Pegaso 650 Factory is made of steel and is an open cradle, single spar frame. It has a 45mm Marzocchi telescopic fork front suspension, while the rear suspension is a high-strength steel swingarm with Aprilia Progressive System (APS) rising rate linkages and a Sachs hydraulic monoshock with adjustable rebound and preload. The front wheel travel is 140mm/5.1 in, while the rear wheel travel is 130mm/6.7 in.
For braking, the Pegaso 650 has a single 320mm front disc with a 2-piston caliper, and a single 240mm rear disc with a 1-piston caliper. The emission standard for this motorcycle is Euro 3.
Make Model: Aprilia Pegaso 650 Factory
Year: 2007-08
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 659 cc / 40.2 in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…