MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Aprilia Specifications

Aprilia Pegaso 650 Factory (2007-08)

Entry updated

Aprilia Pegaso 650 Factory (2007-08)

At a glance

Capacity
659 cc / 40.2 in
Power
36.4 kW / 48 hp @ 6250 rpm
Torque
61.3 Nm / 6.25 kgf-m / 45.2 lb-ft @ 5200 rpm

The full picture.

The Aprilia Pegaso 650 Factory motorcycle was produced in 2007-08, and is powered by a four-stroke, single-cylinder, liquid-cooled engine with electronic fuel injection. It has a capacity of 659 cc, with a bore x stroke of 100 x 84 mm and a compression ratio of 10.0:1. The ignition is digital and it has an electric starter. The maximum power output is 36.4 kW/48 hp at 6250 rpm, while the maximum torque is 61.3 Nm/45.2 lb-ft at 5200 rpm. The clutch is multi-plate in oil bath, and the transmission is a 5-speed with final drive via a chain.

The frame of the Aprilia Pegaso 650 Factory is made of steel and is an open cradle, single spar frame. It has a 45mm Marzocchi telescopic fork front suspension, while the rear suspension is a high-strength steel swingarm with Aprilia Progressive System (APS) rising rate linkages and a Sachs hydraulic monoshock with adjustable rebound and preload. The front wheel travel is 140mm/5.1 in, while the rear wheel travel is 130mm/6.7 in.

For braking, the Pegaso 650 has a single 320mm front disc with a 2-piston caliper, and a single 240mm rear disc with a 1-piston caliper. The emission standard for this motorcycle is Euro 3.


Technical specifications:

Make Model: Aprilia Pegaso 650 Factory

Motorcycle technical specifications
Year2007-08
EngineFour stroke, single cylinder, SOHC, 4 valves
Capacity659 cc / 40.2 in
Bore x Stroke100 x 84 mm
Compression Ratio10.0:1
Cooling SystemLiquid cooled
Emission StandardEuro 3
InductionElectronic fuel injection. ~A44mm throttle body
IgnitionDigital
StartingElectric
Max Power36.4 kW / 48 hp @ 6250 rpm
Max Torque61.3 Nm / 6.25 kgf-m / 45.2 lb-ft @ 5200 rpm
ClutchMulti-plate in oil bath
Transmission5 Speed
Final DriveChain
FrameSteel, open cradle, single spar frame
Front Suspension~A45 mm Marzocchi telescopic fork
Front Wheel Travel140 mm / 5.1 in
Rear SuspensionHigh strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload.
Rear Wheel Travel130 mm / 6.7 in
Front BrakesSingle ~A320 mm disc, 2 piston caliper
Rear BrakesSingle ~A240 mm disc, 1 piston caliper