MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Honda Specifications

Honda VFR1200 DCT (2016-17)

Entry updated

Honda VFR1200 DCT (2016-17)

At a glance

Capacity
1237 cc / 75.4 cu-in cc / 75.4 cu-in
Power
127 kW / 170 hp @ 10000 rpm
Torque
129 Nm / 95.1 lb-ft @ 8750 rpm
Seat height
815 mm / 31.9 in

The full picture.

The Honda VFR 1200FA is a motorcycle model produced between 2016 and 2017. It has a four-stroke engine with a capacity of 1237cc, a compression ratio of 12.0:1, and is liquid-cooled. The ignition is digital transistorized with electronic advance computerized control and has a spark plug type of IMR9E-9HES (NGK) or VUH27ES (DENSO). The motorcycle has a clutch operation that is hydraulic and a 6-speed transmission with two automatic modes and a manual mode. It has a final drive of a shaft and two disc brakes with a combined anti-lock braking system. The front suspension is an inverted telescopic fork with a 41mm HMAS cartridge-type, and the rear suspension is a Pro-Link HMAS gas shock with an adjustable spring preload. The motorcycle has a wheelbase of 1545mm and a seat height of 815mm. Its wet weight is 267kg, and its fuel capacity is 18.5 litres. The average consumption is 17.8km/lit, and it has a top speed of 251.2km/h.


Technical specifications:

Make Model: Honda VFR 1200FA

Motorcycle technical specifications
Year2016 – 17
EngineFour stroke, 76 degrees V-4, SOHC, 4 valve per cylinder
Capacity1237 cc / 75.4 cu-in cc / 75.4 cu-in
Bore x Stroke81 x 60 mm
Compression Ratio12.0:1
Cooling SystemLiquid cooled
InductionPGM-FI electronic injection
IgnitionDigital transistorized with electronic advance computerized control Ignition Timing: 6.4 degrees -10.4 degrees BTDC (idle speed) Sparkplug Type: IMR9E-9HES (NGK); VUH27ES (DENSO)
Spark PlugIMR9E-9HES (NGK); VUH27ES (DENSO)
StartingElectric
Max Power127 kW / 170 hp @ 10000 rpm
Max Torque129 Nm / 95.1 lb-ft @ 8750 rpm
ClutchWet, multiplate slipper type, Clutch Operation Hydraulic
Transmission6 speed with two automatic modes and manual mode
Final DriveShaft
Gear Ratio1 2.600 (39/15) 2nd 1.736 (33/19) 3rd 1.363 (30/22) 4th 1.160 (29/25) 5th 1.032 (32/31) 6th 0.939 (31/33)
Chassis TypeDouble beam cast aluminum vacuum mold Geometry direction: 25.5 degrees, 101 mm forward Swingarm: single-arm aluminum driveshaft
Front SuspensionInverted telescopic fork 41 mm HMAS cartridge-type with adjustable spring preload without positions,
Front Wheel Travel120 mm / 4.3 in
Rear SuspensionPro-Link HMAS gas shock, adjustable spring preload 25 positions,
Rear Wheel Travel120 mm / 4.3 in
Front Brakes2x Hydraulic discs 320mm floating, 6-piston radial calipers, Combined-ABS
Rear BrakesSingle hydraulic 276mm disc 2 piston caliper, Combined-ABS
Front Tyre120/70 ZR17M / C (58W)
Rear Tyre190/55 ZR17M / C (75W)
Rake (Caster angle)25.3 degrees
Trail101.mm / 4 in
DimensionsLength 2244 mm / 88.3 in Width 752 mm / 29.6 in Height 1222 mm / 48.1 in
Wheelbase1545 mm / 60.8 in
Seat Height815 mm / 31.9 in
Wet Weight267 kg / 613 lbs
Fuel Capacity18.5 Litres / 5.0 US gal
Average Consumption17.8 km/lit
Standing 1/4 Mile10.8 sec
Top Speed251.2 km/h / 156 mph