Yamaha DT360 (1973-75)

The Yamaha DT360A was manufactured from 1973-75 and features a two stroke, single cylinder engine with a capacity of 351 cc. The bike has a compression ratio of 6.4:1 and is cooled by air. The DT360A is equipped with a single 30mm Mikuni carburetor and CDI ignition, and can produce a maximum power of 32 hp at 6000 rpm and a maximum torque of 3.6 kgf-m at 6500 rpm. The transmission is a five speed with final chain drive. The front suspension consists of telescopic forks and the rear suspension has dual shocks. The brakes are drum brakes, and the bike has a wheelbase of 1425 mm and a ground clearance of 220 mm. The dry weight of the DT360A is 125 kg and the wet weight is 134 kg. The fuel capacity is 9 litres.

Technical specifications:

Make Model: Yamaha DT 360A

Year: 1973 – 75
Engine: Two stroke, single cylinder, read valve
Capacity: 351 cc / 21.4 cu-in
Bore x Stroke: 80 70 mm
Cooling System: Air cooled
Compression Ratio: 6.4:1
Induction: Single 30mm Mikuni carburetor
Ignition: CDI
Starting: Kick
Max Power: 32 hp / 23.4 kW @ 6000 rpm
Max Torque: 3.6 kgf-m / 26 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Wheelbase: 1425 mm / 56.1 in
Ground Clearance: 220 mm / 8.6 in
Dry Weight: 125 kg / 275.5 lbs
Wet Weight: 134 kg / 295.4 lbs
Fuel Capacity: 9 Litres / 2.3 US gal