Yamaha DT125RE (2003-04)

The Yamaha DT125RE is a two-stroke, single-cylinder, reed-valve motorcycle with a capacity of 123cc. It has a compression ratio of 6.8:1 and lubrication through autolube with an oil capacity of 1.2 litres. The induction system is Mikuni 28 SS, and ignition is through CDI, which starts via a kick. At maximum power, the Yamaha DT125RE produces 14.7 hp at 7000rpm and has a max torque of 1.7kgf-m or 16.3Nm. It has a wet multi-plate clutch, six-speed transmission, and final chain drive. In terms of suspension, the bike has a 41mm telescopic fork at the front and a monocross linkage at the rear. The front and rear brakes are single 230mm and 220mm discs, respectively. The Yamaha DT125RE’s dimensions are 2135mm in length, 820mm in width, and 1255mm in height, with a wheelbase of 1415mm, seat height of 885mm, and a ground clearance of 270mm. The dry weight of the motorcycle is 116kg, and it has a fuel capacity of 10 litres. The front and rear tyres are sized 80/90-21 and 110/80-18, respectively. This bike was produced in 2003-2004.

Technical specifications:

Make Model: Yamaha DT 125RE

Year: 2003-04
Engine: Two stroke, single cylinder, reed-valve
Capacity: 123 cc / 7.5 cu-in
Bore x Stroke: 56 X 50 mm
Compression Ratio: 6.8:1
Lubrication: Autolube
Oil Capacity: 1.2 Litres
Induction: Mikuni 28 SS
Ignition: CDI
Starting: Kick
Max Power: 14.7 hp / 10.8 kW @ 7000 rpm
Max Torque: 1.7 kgf-m / 16.3 Nm @ 7000 rpm
Clutch: Wet multiplate
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 41mm Telescopic forks
Front Wheel Travel: 170 mm / 6.6 in
Rear Suspension: Monocross linkage
Rear Wheel Travel: 200 mm / 7.9 in6.6 in
Front Brakes: Single 230mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 80/90 -21
Rear Tyre: 110/80 -18
Dimensions: Length 2135 mm / 81.0 in Width 820 mm / 32.2 in Height 1255 mm / 49.4 in
Wheelbase: 1415 mm / 55.7 in
Seat Height: 885 mm / 34.8 in
Ground Clearance: 270 mm / 10.6 in
Dry Weight: 116 kg / 255.7 lbs
Fuel Capacity: 10 Litres / 2.2 gal