Victory Vegas (2011-12)

The Victory Vegas Zach Ness motorcycle was made in 2011-2012 and has a 1731cc V twin engine with electronic fuel injection and dual 45mm throttle body. It has a maximum power of 96.9 hp and 153 Nm of torque, with a 6-speed transmission and carbon fiber reinforced belt final drive. The front suspension has a 43mm inverted telescopic fork and the rear suspension is single, mono-tube gas forged and cast aluminum with rising-rate linkage. It has single 300mm floating rotor brakes with 4 piston calipers in the front and 2 piston calipers in the back, along with an 80/90-21 front tire and 180/55 R18 rear tire. The seat height is 640mm and it has a GVWR of 522 kg and a dry weight of 291 kg. Its fuel capacity is 17 liters, or 4.5 gallons.

Technical specifications:

Make Model: Victory Vegas Zach Ness

Year: 2011 – 12
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity: 1731cc /106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.4:1
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Induction: Electronic Fuel Injection with dual 45mm throttle body
Starting: Electric
Charging System: 48 amps max output
Battery: 12 volts / 18 amp hours
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / / 113 ft/lb
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork, 130mm wheel travel
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 80/90 -21
Rear Tyre: 180/55 R18
Seat Height: 640 mm / 25.2 in
GVWR: 522 kg / 1151 lbs
Dry Weight: 291 kg / 645 lbs
Fuel Capacity: 17 Litres / US 4.5 gal