Categories: Victory

Victory Hammer (2005-06)

The Victory Hammer motorcycle was produced from 2005 to 2006 and boasts a four stroke, 50 degree V twin SOHC engine with 4 valves per cylinder, with a capacity of 1634cc. It has a compression ratio of 9.8:1 and an electronic fuel injection system with 44mm throttle bodies. Starting is electric with a 12-volt/18-amp hour battery. It has a 6-speed transmission with a final drive of a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork with 130mm/5.1in wheel travel, while the rear suspension is a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage with 100mm/3.9in of wheel travel. The front brakes have 2x 300mm floating rotors with 4 piston calipers and the rear brake has a single 300mm floating rotor with a 2 piston caliper. The front wheel is 18 x 3.5 in, while the rear wheel is 18 x 8.5 in with a front tire of 130/70 R18 and a rear tire of 250/40 R18. The rake is 32.7 degrees with a trail of 140 mm/5.5 in. It has a length of 93.1 in/2,366 mm, a wheelbase of 1669 mm/65.7 in, a seat height of 660mm/26in, and a ground clearance of 135mm/5.3in. The dry weight of the motorcycle is 305kg/672 lbs with a fuel capacity of 17 litres/4.5 US gal.


Technical specifications:

Make Model: Victory Hammer

Year: 2005 – 06
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

2 years ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

2 years ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

3 years ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

3 years ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

3 years ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

3 years ago