Victory Hammer (2005-06)

The Victory Hammer motorcycle was produced from 2005 to 2006 and boasts a four stroke, 50 degree V twin SOHC engine with 4 valves per cylinder, with a capacity of 1634cc. It has a compression ratio of 9.8:1 and an electronic fuel injection system with 44mm throttle bodies. Starting is electric with a 12-volt/18-amp hour battery. It has a 6-speed transmission with a final drive of a carbon fiber reinforced belt. The front suspension is a 43mm inverted cartridge telescopic fork with 130mm/5.1in wheel travel, while the rear suspension is a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage with 100mm/3.9in of wheel travel. The front brakes have 2x 300mm floating rotors with 4 piston calipers and the rear brake has a single 300mm floating rotor with a 2 piston caliper. The front wheel is 18 x 3.5 in, while the rear wheel is 18 x 8.5 in with a front tire of 130/70 R18 and a rear tire of 250/40 R18. The rake is 32.7 degrees with a trail of 140 mm/5.5 in. It has a length of 93.1 in/2,366 mm, a wheelbase of 1669 mm/65.7 in, a seat height of 660mm/26in, and a ground clearance of 135mm/5.3in. The dry weight of the motorcycle is 305kg/672 lbs with a fuel capacity of 17 litres/4.5 US gal.

Technical specifications:

Make Model: Victory Hammer