MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Vespa Specifications

Vespa PK50 N Speedmatic (1992-96)

Entry updated

At a glance

Capacity
49.8 cc / 3.0 cub in
Power
2.7 kW / 3.7 Hp @ 7000 rpm

The full picture.

The Vespa PK50 N Speedmatic was a two-stroke, single cylinder motorcycle produced from 1992 to 1996. It had a capacity of 49.8cc and a compression ratio of 9.1:1. The carburettor was a Dell’Orto SHB 16/10, and it had a 1:50 fuel mixture. The ignition system was a flywheel magneto, and it started with a kick-start. The clutch was an oil bath multi-plate type, and it had a maximum power output of 2.7 kW at 7000 rpm. The transmission was a 4-speed grip shift, and the gear ratios were 1st 26.88 / 2nd 17.74 / 3rd 12.78 / 4th 9.62:1. The final drive was direct, and it had a pressed sheet steel frame with a streamlined monocoque structure. The suspension was a trailing arm coil spring and damper in the front, and a coil spring damper in the rear. The brakes were 150mm drum in both the front and the rear, and the wheels were interchangeable pressed steel flanges. The dimensions of the motorcycle were 1675mm in length, 700mm in width, and 1070mm in height. The wheelbase was 1175mm, the ground clearance was 252mm, and the dry weight was 77kg. The fuel capacity was 6.2 liters, with an additional 1.2 liters in reserve. The average fuel consumption was 1.4 liters/100 km, and the top speed was 70 km/h.


Technical specifications:

Make Model: Vespa PK 50 N Speedmatic

Motorcycle technical specifications
Year1992 – 96
EngineTwo stroke, single cylinder
Capacity49.8 cc / 3.0 cub in
Bore x Stroke38.4 x 43 mm
Compression Ratio9.1:1
Mixture1:50
CarburettorDell’Orto SHB 16/10
CoolingAir cooled with centrifugal fan
Battery1 x 6V – 9.5 Ah batteries
InductionRotary valve
IgnitionFlywheel magneto
StartingKick start
Spark PlugBosch W225 T1
ClutchOil bath, multi plate
Max Power2.7 kW / 3.7 Hp @ 7000 rpm
Transmission4 Speed, grip shift
Gear Ratios1st 26.88 / 2nd 17.74 / 3rd 12.78 / 4th 9.62:1
Final DriveDirect drive
FramePressed sheet steel with streamlined monocoque structure
Front SuspensionTrailing arm, coil spring, damper
Rear SuspensionCoil spring, damper
Front Brakes150 mm drum
Rear Brakes150 mm drum
WheelsPressed steel flanges, interchangeable
Front Tyre3 x 10″
Rear Tyre3 x 10″
DimensionsLength: 1675 mm / 65.9 in Width: 700 mm / 27.6 in Height: 1070 mm / 42.0 in
Wheelbase1175 mm / 46.5 in
Ground clearance252 mm / 9.9 in
Dry Weight77 kg / 169.7 lbs
Fuel Capacity6.2 L / 1.6 US gal
Reserve1.2 L / 0.32 US gal
Consumption average1.4 L/100 km / 71.4 km/l / 168 US mpg
Top Speed70 km/h / 43.5 mph