MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Triumph Specifications

Triumph Street Triple Grey 10th Anniversary SE (2017)

Entry updated

Triumph Street Triple Grey 10th Anniversary SE (2017)

At a glance

Capacity
675 cc / 41.2 cub in.
Power
78 kW / 106 hp @ 11850 rpm
Torque
68 Nm / 6.9 kgf-m / 50 ft/lb @ 9750 rpm
Seat height
800 mm / 31.5 in

The full picture.

The Triumph Street Triple Grey 10th Anniversary SE motorcycle was produced in 2017 with only 50 units made. It has a four-stroke, in-line 3-cylinder engine with a 675 cc capacity and cooling system using liquid. The compression ratio is 12.65:1 and the bike has multipoint sequential electronic fuel injection with SAI. The motorbike has a maximum power of 78 kW/106 hp at 11850 rpm and a maximum torque of 68 Nm/6.9 kgf-m/50 ft/lb at 9750 rpm. It features a 6-speed transmission, O ring chain final drive, and an aluminum beam twin spar frame. The bike’s suspension consists of 41mm Kayaba telescopic upside-down forks and a Kayaba monoshock, adjustable preload. The front brakes are 2 x 310 mm Floating discs, Nissen 2-piston sliding calipers with ABS, while the rear brakes are a single 220 mm disc and Brembo 1 piston caliper, also with ABS. The front wheel is cast aluminum alloy 5-spoke, 17 x 3.5in, and the rear wheel is cast aluminum alloy 5-spoke, 17 x 5.5in. The motorcycle has a length of 2055mm/80.8in, width of 740mm/29.1in (handlebar), and height of 1060mm/41.7in (without mirrors). The bike’s dry weight is 168 kg/370 lbs and wet weight is 188 kg/414 lbs. It has a fuel capacity of 17.4 Litres/4.6 US gal/3.8 Imp gal and consumes an average of 5.1 L/100 km/19.8 km/l/46.6 US mpg/55.9 Imp mpg, with a top speed of 223.1 km/h/138.6 mph. The Triumph Street Triple Grey 10th Anniversary SE motorcycle is available in Diablo Red, Crystal white, and Phantom black.


Technical specifications:

Make Model: Triumph Street Triple Grey 10th Anniversary

Motorcycle technical specifications
Year2017
Production50 units
EngineFour stroke, in-line 3-cylinder, DOHC, 12 valves
Capacity675 cc / 41.2 cub in.
Bore x Stroke74 x 52.3 mm
Cooling SystemLiquid-cooled
Compression Ratio12.65:1
InductionMultipoint sequential electronic fuel injection with SAI
Oil Capacity3.4 Litres / 3.6 US qt / 3.0 Imp qt
ExhaustStainless steel 3 into 1 exhaust system low single sided stainless steel silencer
IgnitionDigital – inductive type
StartingElectric
Max Power78 kW / 106 hp @ 11850 rpm
Max Torque68 Nm / 6.9 kgf-m / 50 ft/lb @ 9750 rpm
ClutchWet multiplate
Transmission6 Speed
Final DriveO ring, chain
FrameAluminium beam twin spar. Rear – 2 piece high pressure die cast swingarm, twin-sided, cast aluminium alloy
Front Suspension41mm Kayaba telescopic upside down forks
Front Wheel Travel110 mm / 4.3 in
Rear SuspensionKayaba monoshock, adjustable preload
Rear Wheel Travel124.5 mm / 4.9 in
Front Brakes2 x 310 mm Floating discs, Nissen 2 piston sliding calipers,ABS
Rear BrakesSingle 220 mm disc, Brembo 1 piston caliper, ABS
Wheel FrontCast aluminium alloy 5-spoke, 17 x 3.5in
Wheel RearCast aluminium alloy 5-spoke, 17 x 5.5in
Front Tyre120/70 ZR 17
Rear Tyre180/55 ZR 17
Rake24.1 o
Trail99.6 mm / 3.92 in
DimensionsLength: 2055mm / 80.8in Width: 740mm / 29.1in (handle bard) Height: 1060mm / 41.7in (without mirrors)
Wheelbase1410 mm / 55.5in
Seat Height800 mm / 31.5 in
Dry Weight168 kg / 370 lbs
Wet Weight188 kg / 414 lbs
Fuel Capacity17.4 Litres / 4.6 US gal / 3.8 Imp gal
Consumption Average5.1 L/100 km / 19.8 km/l / 46.6 US mpg / 55.9 Imp mpg
Standing 1/4 Mile11.6 sec
Top Speed223.1 km/h / 138.6 mph
ColoursDiablo Red, Crystal white, Phantom black