MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Triumph Specifications

Triumph Sprint ST 1050 (2011)

Entry updated

Triumph Sprint ST 1050 (2011)

At a glance

Capacity
1050 cc / 64.1 cu in
Power
95 kW 128 hp @ 9200 rpm
Torque
108 Nm / 11.0 kgf-m / 80 ft-lb @ 6300 rpm
Seat height
805 mm / 31.7 in

The full picture.

The Triumph Sprint ST 1050 motorcycle was released in 2011 and features a four-stroke, transverse three-cylinder engine with a capacity of 1050cc. The engine has a DOHC and four valves per cylinder, with a compression ratio of 12.0:1 and a lubrication system of wet sump. The bike uses multipoint sequential electronic fuel injection and runs on synthetic, 10W/40 engine oil with a digital CDI ignition and NGK, CR9EK spark plugs. It has a maximum power of 95 kW (128 hp) at 9200 rpm and maximum torque of 108 Nm at 6300 rpm.

The Sprint ST 1050 has a wet, multiple-disc clutch and a six-speed transmission with final drive via chain. The frame is made of aluminum beam perimeter, and the bike has a 45 mm Showa fork with dual-rate springs and adjustable preload for the front suspension, as well as a monoshock with adjustable preload, compression, and rebound damping for the rear suspension. The front brakes consist of two 320 mm floating discs with four-piston Nissen calipers, while the rear brake consists of a single 255 mm disc with a two-piston sliding Nissen caliper.

The motorcycle has 5-spoke alloy wheels, with a front wheel size of 17 x 3.5 in and a rear wheel size of 17 x 5.5 in. The front and rear tires are respectively 120/70 ZR17 and 180/55 ZR17, and the bike has a rake of 23.5 degrees and a trail of 84 mm. The dimensions of the bike are 2114 mm in length, 750 mm in width (handlebars), and 1145 mm in height. The wheelbase is 1470 mm and the seat height is 805 mm.

The dry weight of the bike is 210 kg, or 213 kg for the ABS model, with a wet weight of 268 kg. The fuel tank capacity is 20 liters, with an average fuel consumption of 5.7 L/100 km. The bike can reach a top speed of 258 km/h (160 mph) and can complete a standing quarter-mile in 11.3 seconds.


Technical specifications:

Make Model: Triumph Sprint ST 1050

Motorcycle technical specifications
Year2011
EngineFour stroke, transverse three cylinder. DOHC, 4 valves per cylinder
Capacity1050 cc / 64.1 cu in
Bore x Stroke79 x 71.4 mm
Cooling SystemLiquid cooled
Compression Ratio12.0:1
LubricationWet sump
InductionMultipoint sequential electronic fuel injection
Engine OilSynthetic, 10W/40
IgnitionDigital CDI
Spark PlugNGK, CR9EK
StartingElectric
Max Power95 kW 128 hp @ 9200 rpm
Max Torque108 Nm / 11.0 kgf-m / 80 ft-lb @ 6300 rpm
ClutchWet, multiple discs, cable operated
Transmission6 Speed
Final DriveChain
FrameAluminum beam perimeter
Front Suspension45 mm Showa forks with dual rate springs and adjustable preload
Front Wheel Travel127 mm / 5.0 in
Rear SuspensionMonoshock with adjustable preload, compression and rebound damping
Rear Wheel Travel119 mm / 4.7 in
Front Brakes2 x 320 mm Floating discs, 4 piston Nissen calipers
Rear BrakesSingle 255 mm disc, 2 piston sliding Nissen caliper
Front WheelAlloy 5 spoke, 17 x 3.5 in
Rear WheelAlloy 5 -spoke, 17 x 5.5 in
Front Tyre120/70 ZR17
Rear Tyre180/55 ZR17
Rake23.5 o
Trail84 mm / 3.3 in
DimensionsLength 2114 mm / 83.2 in Width 750 mm / 29.5 in (handlebars) Height 1145 mm / 45.1 in
Wheelbase1470 mm / 57.9 in
Seat Height805 mm / 31.7 in
Dry Weight210 kg / 462 lbs (ABS model: 213kg / 469 lbs)
Wet Weight268 kg / 590 lbs
Fuel Capacity20 Litres / 5.3 US gal / 4.4 Imp gal
Consumption Average5.7 L/100 km / 17.6 km/l / 41.4 US mpg / 49.7 Imp mpg
Standing 1/4 Mile11.3 sec
Top Speed258 km/h / 160 mph